Should this be removed it's not affecting shots. But I have a feeling its affecting the heart rate sensor.
I'm leaving mine on.... Both work for me.
I removed the one over flash, the adhesive and heat it becomes sticky. The one over the camera no problem, up to you.
Sent from my SM-G900T using AllianceR(●)m
jambo89liam said:
Should this be removed it's not affecting shots. But I have a feeling its affecting the heart rate sensor.
Click to expand...
Click to collapse
I'd recommend you take them off for best performance. Especially for the camera. Another layer of film over the glass will degrade image quality. Also, dust, humidity causing a foggy lens etc, can accumulate around and under the outer layer. That protective plastic is only there for during shipping to protect it so it's in perfect condition when you unbox it. It's not meant to stay on. You will get more hazy, less clear images with that outer plastic layer over the lens. EDIT *Also, that outer layer of plastic will give you more risk of lens flare.
Now, over the heart rate sensor? That's up to you. I'm not certain it if would affect the sensor reading. Since I don't use it, I wouldn't mind leaving it on. But it's such a small surface area to begin with, it would be hard to break. But personally, I want optimal image quality, so that plastic layer comes off for me. Much like I don't use protective UV filters over my DSLR camera lenses. :good:
JDM9499 said:
I'd recommend you take them off for best performance. Especially for the camera. Another layer of film over the glass will degrade image quality. Also, dust, humidity causing a foggy lens etc, can accumulate around and under the outer layer. That protective plastic is only there for during shipping to protect it so it's in perfect condition when you unbox it. It's not meant to stay on. You will get more hazy, less clear images with that outer plastic layer over the lens. EDIT *Also, that outer layer of plastic will give you more risk of lens flare.
Now, over the heart rate sensor? That's up to you. I'm not certain it if would affect the sensor reading. Since I don't use it, I wouldn't mind leaving it on. But it's such a small surface area to begin with, it would be hard to break. But personally, I want optimal image quality, so that plastic layer comes off for me. Much like I don't use protective UV filters over my DSLR camera lenses. :good:
Click to expand...
Click to collapse
I agree (except for the part about UV filters on a DSLR, but that's another subject). It is crappy plastic that they use on the sticker and in no way meant to be used as a protective layer for camera shots.
Great answers my next question, any tips on getting them off I can't get a finger nail under to peel it.
Sent from my SM-G920F using XDA Free mobile app
jambo89liam said:
Great answers my next question, any tips on getting them off I can't get a finger nail under to peel it.
Sent from my SM-G920F using XDA Free mobile app
Click to expand...
Click to collapse
Ha, had the same problem. Keep trying with your finger nail. You'll eventually get it. Best not to use anything else that could risk scratching it such as a needle, tweezers, filer etc. Just keep at it with your nail. :fingers-crossed:
I'd remove the one on the heartrate sensor but you can keep the one on the camera as the camera lens itself is not covered by it!
It has a hole where the lens is.
So image quality does not suffer!
I actually removed both but as I found out the one on the camera actually has a hole for the lens I carefully placed it back on there.
whitepaw said:
the camera as the camera lens itself is not covered by it!
It has a hole where the lens is.
Click to expand...
Click to collapse
Your totally right just ran my nail over it, the lens itself it not covered.
Sent from my SM-G920F using XDA Free mobile app
whitepaw said:
I'd remove the one on the heartrate sensor but you can keep the one on the camera as the camera lens itself is not covered by it!
It has a hole where the lens is.
So image quality does not suffer!
I actually removed both but as I found out the one on the camera actually has a hole for the lens I carefully placed it back on there.
Click to expand...
Click to collapse
Both my wife's S6 and my S6 had no hole. We have T-Mobile variants. Hmmm, very interesting.
JDM9499 said:
Both my wife's S6 and my S6 had no hole. We have T-Mobile variants. Hmmm, very interesting.
Click to expand...
Click to collapse
I have a T-Mobile Germany one which has the hole. It's only covering the glass around the lens here.
It's the edge here. Maybe it differs between edge and normal S6?
whitepaw said:
I have a T-Mobile Germany one which has the hole. It's only covering the glass around the lens here.
Click to expand...
Click to collapse
I should have mentioned U.S. T-Mobile versions in my last post. I could have very well quickly taken them off and not realize there was a hole....and now thinking back I just don't remember.
JDM9499 said:
I should have mentioned U.S. T-Mobile versions in my last post. I could have very well quickly taken them off and not realize there was a hole....and now thinking back I just don't remember.
Click to expand...
Click to collapse
Have tmobile us version and has hole.
To take those pieces off, use a piece of tape over and peel off.
Sent from my SM-G920P using XDA Free mobile app
Bloody hell I scratched the glass aa bbit over the bottom sensor below the flash. What is that sensor for and will it be affected?
kitch9 said:
Bloody hell I scratched the glass aa bbit over the bottom sensor below the flash. What is that sensor for and will it be affected?
Click to expand...
Click to collapse
Heart rate, and probably not unless the scratch is huge.
sticky tape works best when I removed mine
Related
Hi all,
Just wanted to get people's opinion on the lens, specifically the large lens cover. I have a scratch across mine, which in one part is rather deep. Not crack levels of deepness, but deeper than a hairline. I currently have a dbrand skin covering the lens - is this likely to develop into a crack, or should I not worry about it?
I've read somewhere that the camera lens is sapphire crystal and virtually unscratchable - I'm calling BS on that.
Thanks
Sent from my Nexus 5 using xda app-developers App
AntMcl said:
Just wanted to get people's opinion on the lens, specifically the large lens cover.
Click to expand...
Click to collapse
I don't mind it, especially if its a design choice LG had to make in-order to incorporate the OIS camera sensor. I'd rather have a slightly protruding camera lens on an otherwise thin phone over a recessed camera on a thick phone or a weird camera hump like that of the nokia 1020.
AntMcl said:
I currently have a dbrand skin covering the lens - is this likely to develop into a crack, or should I not worry about it?
Click to expand...
Click to collapse
I don't think a small scratch on something small like the camera lens would grow to be a crack. So don't worry about it.
AntMcl said:
I've read somewhere that the camera lens is sapphire crystal and virtually unscratchable
Click to expand...
Click to collapse
You've read wrong, Nexus 5 was never claimed to have a sapphire crystal camera lens.
Should I remove the protecting thing on the camera of the nexus 5 or will the camera get scrached?
The glass underneath the plastic is recessed so should be OK. That said, you can buy screen protectors with camera covers too.
Sent from my Nexus 5 using Tapatalk
The lens is also fairly durable and does not scratch nearly as easily as the screen.
Last, a lens needs to be very scratched up for it to have a significant impact on your pictures.
http://www.digital-photo-secrets.com/tip/1095/does-a-lens-scratch-really-impact-your-photos/
if you have no need to use the camera, you dont need to take it off. but if you do want to use the camera, take the darn thing off! it wont get scratched very easy, believe me. i probably take more photos here than anyone else, on a daily level, and not a scratch on mine. been using since new years. and those screen savers with camera covers, they reduce image quality. personally, im very anal about the quality of the images, and anytrhing that covers or "protects" the camera lens cover will reduce image quality, no matter if it says it doesnt or someone says they dont notice.
raptir said:
The lens is also fairly durable and does not scratch nearly as easily as the screen.
Last, a lens needs to be very scratched up for it to have a significant impact on your pictures.
http://www.digital-photo-secrets.com/tip/1095/does-a-lens-scratch-really-impact-your-photos/
Click to expand...
Click to collapse
I imagine the lens scratches really easily but luckily its actually underneath a layer of glass.
As a keen photographer myself, I only partially agree with the link. Probably wouldn't matter on a device like this but as a general rule it would.
Sent from my Nexus 5 using Tapatalk
I decided to remove it guys and it turned out that the plastic thing accualy doesn't cover the lense anyway it covers the HUGE camera becide it :laugh:
Mazen Amr said:
I decided to remove it guys and it turned out that the plastic thing accualy doesn't cover the lense anyway it covers the HUGE camera becide it :laugh:
Click to expand...
Click to collapse
Good job. It would just fall off eventually.
Also please remove the IMEI sticker from the back. Some people think it has a purpose or isn't removable for some odd reason.
bblzd said:
Good job. It would just fall off eventually.
Also please remove the IMEI sticker from the back. Some people think it has a purpose or isn't removable for some odd reason.
Click to expand...
Click to collapse
Removed it long time ago
simms22 said:
if you have no need to use the camera, you dont need to take it off. but if you do want to use the camera, take the darn thing off! it wont get scratched very easy, believe me. i probably take more photos here than anyone else, on a daily level, and not a scratch on mine. been using since new years. and those screen savers with camera covers, they reduce image quality. personally, im very anal about the quality of the images, and anytrhing that covers or "protects" the camera lens cover will reduce image quality, no matter if it says it doesnt or someone says they dont notice.
Click to expand...
Click to collapse
I don't see how taking photos would scratch the lens =P I think it's more of being in your pocket or leaving it on the table with no case on. Also, as OP found out, the plastic has a center opening for the actual camera and only covers everything around it.
@ OP After I RMA'd my phone I kept the plastic on there. However, after getting a dbrand skin that came with a lens covering, I used it to replace the plastic. A lot of skins now come with them, and as @rootSU said you can order transparent ones that probably will stay on the phone better.
Over the past few days my pictures have started looking like they were all taken in a 1920s jazz club.
I took a photo on the 9th of my living room setup that came out perfectly clear. The next day I noticed that pictures were coming out a little fuzzy, having a hard time focusing, and there appeared to be a slight film on the lens cover. The picture I post below is from today and the haze seems to cover almost the entire lens cover.
I removed the film the day I purchased the phone and haven't made any changes to my daily routine that may have brought this about.
Does anyone have any ideas on how to fix this? Hair dryer on medium for a minute or so? Should I RMA? Anyone else having this problem?
Is there any kind of condensation under the lens?
igothacked1 said:
Is there any kind of condensation under the lens?
Click to expand...
Click to collapse
I can't tell what it is but there is definitely something under the lens. However, I checked the water indicator in the sim tray and it seems to still be white.
Edit: I know you can't really tell anything from those photos. In the first one, even though it is out of focus, you can tell there is definitely something on the lens.
I can't tell much by the photos, but the camera and finger sensor ship with protective vinyl covers. The one on my finger sensor was particularly hard to remove because it was cut and aligned so perfectly, there was no lip to grab. I had to use tweezers to remove it.
sublimaze said:
...The one on my finger sensor was particularly hard to remove because it was cut and aligned so perfectly, there was no lip to grab. I had to use tweezers to remove it.
Click to expand...
Click to collapse
Yeah, I distinctly remember the fingerprint protector being a pain to remove. That's why I know there isn't a protector on the lens...
hiko36 said:
Yeah, I distinctly remember the fingerprint protector being a pain to remove. That's why I know there isn't a protector on the lens...
Click to expand...
Click to collapse
Ah, I completely missed that in your OP. My S6 takes the best photos of any phone I've ever owned, I have zero complaints about that. Your photo is definitely hazy. I have never taken a photo like that. If you are still in your return period, you should exchange it.
Sent from my SM-G920T using Tapatalk
There is definitely something wrong there. Return the device while you can.
Can't really tell from the pics, but you might have condensation in the inner elements of the compound lens.
Sent from my SM-G920F using Tapatalk
Thanks, gents. Looks like I'll be filing a warranty replacement on Monday.
The only thing I can think is that when I went for a run with it in an armband the morning it started and somehow sweat got in there. I guess they weren't kidding when they removed the water proof rating from the s5.
I attached a couple pictures from before it started. This camera seriously is phenomenal.
Took phone out case today to just kinda clean off and noticed that the camera flash lens had a ton of scratches on it,anyone else notice or have this problem?any does anyone know if it's even made out of glass,wouldn't think glass would scratch that easily, my phone been in case and use holster since I got it.
Never got one scratch on my lense, must be a defective lense cover. I have mine in an otterbox and it's fine.
Sent from my SM-N920T using XDA Premium HD app
Just to clarify,referring to lens for flash and heart rate sensor.
Raver27 said:
Just to clarify,referring to lens for flash and heart rate sensor.
Click to expand...
Click to collapse
Yep, neither my camera lens or flash/heart rate monitor get scratched from my case, should be a defect
Sent from my SM-N920T using XDA Premium HD app
Thanks,just spoke with someone who repairs them,they said the HR sensor lens is made of plastic,just a heads up.
I probably did it from wiping it clean today..smh.
A scratch has 0 effect on either the flash or HR that's probably why they opted for cheaper plastic than Gorilla glass like everywhere else covering essential components like the screen and camera lens.
nique0201 said:
A scratch has 0 effect on either the flash or HR that's probably why they opted for cheaper plastic than Gorilla glass like everywhere else covering essential components like the screen and camera lens.
Click to expand...
Click to collapse
Yea I know,it just sucks that it scratches so easily,looking at it in light it really looks like my wiping with shirt scratch it,tons of scratches
Just figured I share
Raver27 said:
Just figured I share
Click to expand...
Click to collapse
My note 5 had a clear plastic film over the lens and flash that did scratch easily.
Looking at your photos I think yours might to - look at it closely and I think you will see the edge of the film.
Try to carefully remove it using the corner of a credit card or similar plastic item.
DangerousDave said:
My note 5 had a clear plastic film over the lens and flash that did scratch easily.
Looking at your photos I think yours might to - look at it closely and I think you will see the edge of the film.
Try to carefully remove it using the corner of a credit card or similar plastic item.
Click to expand...
Click to collapse
Unfortunately I took that plastic film off the same day I got it.. thanks tho..
Did anyone notice that, unlike the GS6 and other Galaxies before it, the S7 and S7 Edge don't have the plastic film that covers both the camera and heart sensor lenses when you first got it? Some people take them off when they got the phone, but I left it on there on my GS6 to protect the camera lense from scratches.
Just wanted to know whether someone has noticed this on their phones as well?
U are anyways suppose to remove them.
Sent from my SM-G930F using Tapatalk
Dark5tar said:
Did anyone notice that, unlike the GS6 and other Galaxies before it, the S7 and S7 Edge don't have the plastic film that covers both the camera and heart sensor lenses when you first got it? Some people take them off when they got the phone, but I left it on there on my GS6 to protect the camera lense from scratches.
Just wanted to know whether someone has noticed this on their phones as well?
Click to expand...
Click to collapse
That plastic makes photos you take worse because it reflects lights to the camera in a way that it is undesirable. You bought a phone with a fantastic camera. Why would you leave a thing like this attached to it?
Besides, the camera glass is Gorilla. Heart hate sensor is a cheap one. And if you use any kind of case, you can put your phone on the table and the camera glass will never touch table directly.
Enjoy your phone. I know it is not cheap, but it is just a phone.
https://youtu.be/D_bB5fnN7Jk
Sent from my SM-G930F using XDA-Developers mobile app
goTouch said:
That plastic makes photos you take worse because it reflects lights to the camera in a way that it is undesirable. You bought a phone with a fantastic camera. Why would you leave a thing like this attached to it?
Besides, the camera glass is Gorilla. Heart hate sensor is a cheap one. And if you use any kind of case, you can put your phone on the table and the camera glass will never touch table directly.
Enjoy your phone. I know it is not cheap, but it is just a phone.
https://youtu.be/D_bB5fnN7Jk
Sent from my SM-G930F using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks, appreciate your feedback
Even if it did have that plastic on it and you left it on, it'd get scratched up pretty quickly. If you wanted some kind of protection though, you could try d-brand skins. They cover the glass on the camera lens, leaving only a small opening for the aperture (although I don't know how much "give" there is for the OIS function), but that could still get damaged. Personally, I just have a case, front screen protector and that's it.
Kiwi_Dude said:
Even if it did have that plastic on it and you left it on, it'd get scratched up pretty quickly. If you wanted some kind of protection though, you could try d-brand skins. They cover the glass on the camera lens, leaving only a small opening for the aperture (although I don't know how much "give" there is for the OIS function), but that could still get damaged. Personally, I just have a case, front screen protector and that's it.
Click to expand...
Click to collapse
Thanks. Glad to see another NZ lad on here
Also from NZ boys, i ordered some glass protectors from ebay and they fit really well. They fit over the camera lens and on thr heartrate sensor. Check them out. Only took a couple days to get here aswell which was awesome.
tapped on #datbombv7EchoeRom
MRDOCA said:
Also from NZ boys, i ordered some glass protectors from ebay and they fit really well. They fit over the camera lens and on thr heartrate sensor. Check them out. Only took a couple days to get here aswell which was awesome.
tapped on #datbombv7EchoeRom
Click to expand...
Click to collapse
Can you provide a link of the one you bought?
Look at this on eBay http://www.ebay.com/itm/121975555820
Sent from my SM-G935F using Tapatalk