I'm new of this forum , i'm italian and i'm sorry for the bad english.
So , i want to know how to unbrick this f*** smartphone.
i've flashed a rom wich isn't of this smartphone for an error i've forgot of porting the rom..
and now this f*** phone is in bootloop.
i've tried to re-flash a stock rom but isn't possible because it, when i connect the cable usb is and isn't recognized from pc.
i'm becoming crazy .. i can't to flash the stock firmware for this problem.
when i connect the usb cable, this smartphone without the battery is not recognized.
when i insert the battery it turn on and voilà the bootloop, so, i can't work
how to proceed?
Hi
Thanks for writing to us at XDA Assist. I think the best place for your question would be here:
Android Q&A, Help & Troubleshooting
Related
Hello! A week ago i hard-bricked my android device (alcatel ot x'pop 5035x). I am pretty sure that is a hard brick because it isn't turning on, it doesn't charge and nothing happens if I connect it to my PC throush USB. All this because I flashed a stock rom downloaded from 4pda. I used SP FlashTool. After I choose the scatter file; some of that options were already ticked (preloader, uboot, bootimg, recovery) and I ticked 2 more: android and nand. Since then my phone didn't boot.
Sorry for my bad english, I hope you understand.
Hi
Thanks for writing to us at XDA Assist.
I didn't find anything to fix your issue. Try asking in the Android Q&A forum where you may get better help:
Android Q&A, Help & Troubleshooting
Good luck!
Guys
I just bought a sophone i6 plus with an mtk6582
I tried flashing gapss on it via zit flasher and now it is stuck in bootloop
I tried factory resetting it from the recovery....still stuck
Now the problem is that i cant get it to work with sp flash tool.....maybe it is bcoz the debugging is disabled bcoz i just factory reset the phone
Every time i connect the turned off phone to sp flash tool....instead of flashing ....the phone just starts to charge and nothing happens
I tried all maximum usb drivers......i dont wnow how to open bootloader......its not working with adb either.......so basically its just stuck in bootloop only.
Pl help
Thabks
Hi,
Thanks for using XDA assist.
Unfortunately, I couldn't find any information about your problem on your device. However, I would recommend posting in the Android Q&A, Help & Troubleshooting forum as there is no dedicated forum for your device.
Good Luck! - gsstudios
i chosed format system option form the recovery mode after i got malwares on my phone wich i couldn't delete by formating data and after (formating system option) every time i try to turn on my phone it just stock on model number logo and then i tried to install a new rom through PC but it won't connect using the USB but it shows the battery on the screen without any charging progress and now i can't do anything at all!
NOTE:i installed samsung USB drivers.
sorry for my bad english
Hi,
Try posting your question here:
Galaxy S Duos Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!
Hi, today i tried to hard reset mi S6, and i think is a clone, i tried to hard reset, but, i get stuck in the android logo and down appears (Nincs parancs.) I tried to push power button, to reboot the device, but he don't do anyting !!! Is any method to flash my phone with a USB cable connected to my pc??? Or anyting, to flash my device!!
I don't speack inglish very good, im spanish!
Hi
You can ask in the forum linked below, providing as much info as possible so that you can get help
http://forum.xda-developers.com/android/help
Good luck
Hello everyone!
I accquired this phone froma chinese online shop (the third one) and i want to change the chinese rom to euro firmware.
The problem resides in that when i changed the rom following the instructions of this forum in the other 2 previous phones i got it was everything alright and worked correctly, but with this last one i can't even make miflash/qlifil recognise Qualcom Com port. Now i only get at miflash the phone recognised with this weird name: b65bc2d5 . I'm affraid to try flashing because i didn't see anyone who got that name on the program and i don't want to get a brick. Also i tried to change the rom by sdcard with fastboot using the same file i used to install the other 2 phone that worked but it still says that the phone is Z90-7 and it wont take the installation file ( it's the second file on boycracked stock official lenovo vibe shot rom page). The thing is that when you upgrade to eu rom the phone model changes to Z90a40 and takes that rom, but not this last one.
I installed all the drivers manually because the phone on vendor mode can't install them itself (vol up + power button and then plug to the pc).
The version of chinese rom is android 6.0.1.
I hope this info will make someone know the solution because i don't.
Thanks and regards.
P.D: Now i'm triying to plug and detect but can't even do miflash detects it.
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist