Q&A for Root for Xperia E3 D2203 with locked BL
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Root for Xperia E3 D2203 with locked BL. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Phone Bricked after trying to root with locked bootloader (D2203)
My model is D2203. I was following the steps on this thread: http://forum.xda-developers.com/xperia-e3/development/root-xperia-e3-d2203-locked-bl-t3075559/page2. I cannot proceed to step 26 because flashtool does not recognize the device when i connect with vol- tapped. However this shows up when I connect the phone in USB.
09/036/2015 02:36:04 - INFO - Device connected with USB debugging on
09/036/2015 02:36:05 - INFO - Connected device : Sony Xperia E3
09/036/2015 02:36:06 - INFO - Installed version of busybox : BusyBox v1.22.1-Stericson (2014-01-25 17:27:18 CET) multi-call binary.
09/036/2015 02:36:06 - INFO - Android version : 4.4.4 / kernel version : 3.4.0+ / Build number : 18.5.C.0.19
09/036/2015 02:36:06 - INFO - Checking root access
09/036/2015 02:36:07 - INFO - Root Access Allowed
What can I do? Please help me. The phone does not turn on, no screen even appears.
Thanks in advance
---------- Post added at 03:07 AM ---------- Previous post was at 02:45 AM ----------
nevermind, I was putting the needle on the wrong hole on the back xD.
xdauser7777 said:
[/COLOR]nevermind, I was putting the needle on the wrong hole on the back xD.
Click to expand...
Click to collapse
http://cdn.meme.am/instances/500x/55517628.jpg
Hi.
I managed to root my phone (d2203) using this tutorial. I completed all the steps, but when I tried to install xposed it failed. I was trying to fix the SD card KitKat restrictions to properly use Foldermount.
What went wrong?
Xposed error message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit:
I also forgot to mention that I can't update SU binary, despite having completed step 27 2 times already and rebooted every time.
Thank you very much nortonex for this guide,i've finally got my phone rooted although i must admit i thought i'd bricked it half way through but i just followed your instructions to the letter and got there in the end.
Thanks very much mate it's very much appreciated.
Are steps 2 -> 7 necessary if you are already running 4.4.4 on the phone?
TY,works great!
MossyTC said:
Are steps 2 -> 7 necessary if you are already running 4.4.4 on the phone?
Click to expand...
Click to collapse
No, but you need to have FTF file with currently installed firmware, to flash your kernel back, after using M2 kernel.
filipao223 said:
I managed to root my phone (d2203) using this tutorial. I completed all the steps, but when I tried to install xposed it failed. I was trying to fix the SD card KitKat restrictions to properly use Foldermount.
What went wrong?
Click to expand...
Click to collapse
Try to repeat whole procedure again - I don't know why it is not working...
nortonex said:
No, but you need to have FTF file with currently installed firmware, to flash your kernel back, after using M2 kernel.
Try to repeat whole procedure again - I don't know why it is not working...
Click to expand...
Click to collapse
he did,t disabled sony_ric correctly.
nortonex said:
Try to repeat whole procedure again - I don't know why it is not working...
Click to expand...
Click to collapse
Thanks. I repeated everything and now it's working perfectly. Thank you for your work!:good:
data over mobile network doesnt work,VIP Serbia,how can i fix this?
i use xperia E3 d2203
Solved: just manual set APN,and everything works...
zokipfc said:
data over mobile network doesnt work,VIP Serbia,how can i fix this?
i use xperia E3 d2203
Click to expand...
Click to collapse
check if you are on roaming. cause data won,t work on roaming and contact your oprator.
I have this problem
Since Xperia E3 doesn't have recovery mode i cannot use this easy solution
How can i flash the su binary zip ? I need to use flashTool? The phone is rooted with this tutorial.
blocked2014 said:
i have this problem
since xperia e3 doesn't have recovery mode i cannot this easy solution
how can i flash the su binary zip ? I need to use flashtool? The phone is rooted with this tutorial.
Click to expand...
Click to collapse
select normal then reboot
xperia E3 d2212 NO MOBIL SIGNAL
STAND WITH PROBLEM EVEN IF YOU ALREADY TRIED EVERYTHING , USED PC COMPANION 2.1 USED The tool flash, used the xperia firm , did restore everything and I can not retrieve the mobile network xperia e3 , the store I bought do not know what I did , I asked the exchange of the device, but as this is the second not even want to know.
I now have a XPERIA TABLET E3 , how can they help me recover the system has received an update 4.4.4 version number 18.5.B.0.26
please help here in BRAZIL: Eek:
mrgadgetuk said:
select normal then reboot
Click to expand...
Click to collapse
I've done this before:
I installed this eu.chainfire.supersu from play.google and i click normal(not CWM) and i get err : "SuperSU Binary Update Failed error". Then i uninstalled this app and i instaled ChainsDD from play.google have the Tab 'Apps' but is empty(i just rooted). On Tab 'Info' I have: elite not installed(get elite). su binary v2.00:SUPERSU(0) ,with red '-rwxr-xr-x', with green 'root root' and '/sytem/xbin/su'. And two unchecked: temp unroot, ota survival. And when i click su binary v2.00:SUPERSU(0) it say 'Downloading manifest failed' with button Try again.
Then i installed Busybox and i have this problem.
I need to make a new thread for this problem?
Flashtool error message
Hi,
I'm a newbie, and I'm afraid I got as far as flashing the first kernel with Flashtool but it will not complete without errors:
14/054/2015 20:54:01 - ERROR - Processing of system.sin finished with errors.
14/054/2015 20:54:01 - INFO - Ending flash session
14/054/2015 20:54:01 - ERROR - Read error :31 : Un périphérique attaché au système ne fonctionne pas correctement.
14/054/2015 20:54:01 - ERROR - Error flashing. Aborted
Can anyone help?
Catherine
---------- Post added at 09:02 PM ---------- Previous post was at 08:59 PM ----------
Hi,
I'm a newbie, and I'm afraid I got as far as flashing the first kernel with Flashtool but it will not complete without errors:
14/054/2015 20:54:01 - ERROR - Processing of system.sin finished with errors.
14/054/2015 20:54:01 - INFO - Ending flash session
14/054/2015 20:54:01 - ERROR - Read error :31 : Un périphérique attaché au système ne fonctionne pas correctement.
14/054/2015 20:54:01 - ERROR - Error flashing. Aborted
Can anyone help?
Catherine
---------- Post added at 09:08 PM ---------- Previous post was at 09:02 PM ----------
Hi
I'm a newbie and I'm having problems with the first Flashtool step:
Part way through the installation I have three times got the following error message:
14/054/2015 20:54:01 - ERROR - Processing of system.sin finished with errors.
14/054/2015 20:54:01 - INFO - Ending flash session
14/054/2015 20:54:01 - ERROR - Read error :31 : Un périphérique attaché au système ne fonctionne pas correctement.
14/054/2015 20:54:01 - ERROR - Error flashing. Aborted
(It's a French phone)
Can anyone help me out == maybe point me in the direction of an alternative kernel I could try flashing?
Thanks in advance,
Catherine
Related
have the Xperia Neo with bootloader unlocked with 2.3.4 but I have not root.
As root I can be without downgrade? I read that if you can leave the downdrade Xperia Neo as a brick.
I try CyanogenMod-7.1 but I need to be root
Karl.A.C said:
have the Xperia Neo with bootloader unlocked with 2.3.4 but I have not root.
As root I can be without downgrade? I read that if you can leave the downdrade Xperia Neo as a brick.
I try CyanogenMod-7.1 but I need to be root
Click to expand...
Click to collapse
bro how to unlock bootloader gingerbread 2.3.4 xperia neo??
please help me out
im getting error using fastboot method
tell the complete method as you have done it
thanks
The phone should be free
go here to get the serial, when you get props and save it for when you need it
http://unlockbootloader.sonyericsson.com / instructions
1 - download the two files
fastboot_with_Android_USB_file
drivers
2 - In the site that give you courage or desire to believe a folder with the name you wish (I've created on your desktop with the name of Fasboot) within this folder copy the two files
fastboot_with_Android_USB_file
drivers
3 - Unzip fastboot_with_Android_USB_file with the same name within the folders are and USB_Driver fastboot, connect with the Xperia Neo USB by pressing the MENU key, repeat .... the MENU key is the right one
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unzip the file drivers
Search manually the path where you unzipped the folder tengais USB_Driver, is within the fastboot folder
I will come out two options, choose the second name that comes with bootloader, can not remember the full name
4 - Wait to load the drivers
5 - In the fastboot folder press shift (is the shift key) and click the right mouse button in the folder.
Select Open Command Windows Here
6 - In the windows command window paste this command:>> getvar 0x0fce fastboot.exe-i version
7 - If you return a figure means that it is done correctly
8 - paste this command:>>-i fastboot.exe 0x0fce oem unlock 0x [add the serial you've gotten on page h ** p: / / unlockbootloader.sonyericsson.com / instructions]
9 - In less than 4 seconds you open bootloader
This is how I have the folders in which I created
If you connect the USB to the PC you out the blue light on the power key is that you can open the bootloader, if a different color because you can not leave
When the process this is what should come out in your command window
http://www.youtube.com/watch?v=LRH3pC7MhEA
This video Xperia unlock the Arc, but the steps are the same, especially to get the serial release
Drivers
http://www.kickupload.com/files/10ZE2XBT/drivers.rar
Fastboot
http://www.kickupload.com/files/1XE2LPK1/fastboot_with_Android_USB_file.rar
password systemppc
thanks dude
password for above rar files??????
thank you
---------- Post added at 01:36 PM ---------- Previous post was at 01:31 PM ----------
1)unlocking bootloader
2)next is rooting (super user)
3)then cyanmod7 installation??????????
Is these are the steps to have cyanmod7 in xperia neo????
i managed to root 2.3.4 but still stuck with CyanogenMod...it gives me errors..
rizaldo said:
i managed to root 2.3.4 but still stuck with CyanogenMod...it gives me errors..
Click to expand...
Click to collapse
password for above rar files??????
imr.uvce said:
password for above rar files??????
Click to expand...
Click to collapse
Password
systemppc
imr.uvce said:
thanks dude
password for above rar files??????
thank you
---------- Post added at 01:36 PM ---------- Previous post was at 01:31 PM ----------
1)unlocking bootloader
2)next is rooting (super user)
3)then cyanmod7 installation??????????
Is these are the steps to have cyanmod7 in xperia neo????
Click to expand...
Click to collapse
1.- unlocking bootloader
2.- next is rooting (super user)
3 .- install kernel NEO FW: 3.0.1.A.0.145
http://forum.xda-developers.com/showpost.php?p=16221326&postcount=1
4 .- install CyanogenMod ROM 7.1.0.1
http://forum.cyanogenmod.com/forum/444-sony-ericsson-xperia-neo-stable-mod/
hi dude
which kernel of neo to be used for 2.3.4 neo?there are many like old n new in the kernel neo download page ?
imr.uvce said:
hi dude
which kernel of neo to be used for 2.3.4 neo?there are many like old n new in the kernel neo download page ?
Click to expand...
Click to collapse
DooMKernel v09 for FW 4.0.1.A.283
http://forum.xda-developers.com/showthread.php?t=1197263
let us know once you install cyanmod7 on your xperia neo and what all the things you used
and Im still trying to unlock boot loader
I can not install because I have the firmware cyanogenmod7 4.0.1.A.0.368, you can only have the firmware installed 4.0.A.2.368, I have to wait to take out the ROM 4.0.1.A.0.368
I can not downgrade by the failure of 0%
what problems you have to open the bootloader? is easy to do
Karl.A.C said:
I can not install because I have the firmware cyanogenmod7 4.0.1.A.0.368, you can only have the firmware installed 4.0.A.2.368, I have to wait to take out the ROM 4.0.1.A.0.368
I can not downgrade by the failure of 0%
what problems you have to open the bootloader? is easy to do
Click to expand...
Click to collapse
1st i got the response as 0.03s
then im getting error
so trying it
The tutorial is in Spanish, I hope you can understand something to remove your doubts
RootXperia.zip (469.44 KB)
http://www.multiupload.com/1YG1S9XJU9
recoveryNeo.rar (4.53 MB)
http://www.multiupload.com/YEYKLI3YEL
ya dude thanks ill try accordingly
I hope I've helped, I'm no expert on android, I have started recently and thanks to XDA I'm learning to use
a greeting
commands which u hav given are not working !!!! did u unlock 2.3.4 neo ????
---------- Post added at 01:29 PM ---------- Previous post was at 01:16 PM ----------
my model is mt15i
2.3.4
kernel ver -2.6.32.9-perf
build numbr- 4.0.1.a.0.283
no able to unlock
....oem unlock failed...
error7:installation aborted
this is the error i am getting if i use clockwork recovery mod to install CM7 on neo
and i use boot.img from CM7.zip folder..im able to install CM7 properly but bootloop error..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
for Motorola Motoluxe XT615
Foreword
At the time there are two different kind of CWM recoverys. Both have their positiv and negativ characteristics. Some say the installable is better then the temp once, other think in a other way. So choose for your own and make your own experience.
Installable Recovery
At first your phone has to be rooted! In the next step you have to activate "Unknown Applications" (Settings > Applications).
Download the attached recovery(ENG).apk below or click for download. Copy the file to your sdcard and navigate to the directory where you have pasted the file in.
Click on it and install the APK.
Now you should have a app called "System Recovery" in your menü. Before you continue you have to connect your phone to a power supply or to your PC.
Now open the app and press the button with the title "Enter Recovery". You will be asked if you want to give the application root right.
Agree and the phone will boot into recovery mode!
As usual you navigate with volume+, volume- and except with the powerbutton.
NOTE:
- You´re just able to enter custom recovery while your phone is connected to PC or power supply.
- This version of CWM has a restore bug, so you should not restore a nandroid backup with this version!
Temp Recovery
By this type of recovery you have to execute a batchscript on a PC running Windows.
Unzip the archive and double click on the "-=Recovery-loader=-.bat". Further instructions are mentioned in the script.
NOTE: Everytime you want to use this type of recovery, you have to reexecute the script
v6.0.2.7 (recommended version / click for download)
- Language: English
- no MD5 mismatch error
- no root required!
- after long time of testing, we can say it´ll work for 99%
v6.0.1.5 (click for download)
v6.0.1.4 (click for download):
Changelog
25.01.12: Added new temp recovery 6.0.2.7 by enox and set as recommanded version
18.10.12: Added new temp recovery 6.0.1.5 by enox and set as recommanded version
03.10.12: Removed chinese Temp-Recovery 5.5.0.4 because englisch Temp-Recovery 6.0.1.4 is fully functional too and now recommanded to use
22.09.12: Published CWM Recovery
Thanks goes to: enox.co | monkichi1987 | cjr123 | luxxx123
I already have them, but thanks for posting it bro!
It will sure help others who don't yet know how to install and use it
Good :thumbup:
Sent from my ST25i using xda app-developers app
recovery
Possibly youtube video? May the ruin be backup with this procedure? Baggier Ira one possibly?!
My need would be original ruin rescue.
thank you
Suuuuuper tutorial,thx man//
luxxx123 what happens if you click press the button with the title "System Recovery" my phone is NO connected to PC or power supply?????
Detonatte said:
Suuuuuper tutorial,thx man//
luxxx123 what happens if you click press the button with the title "System Recovery" my phone is NO connected to PC or power supply?????
Click to expand...
Click to collapse
the command behind the button only shuts down the phone.
when it is connected to the pc or power supply it will automaticly start into charge-mode.
normaly you'll see a big battery thats charging.
But this process got hijacked so that it loads the cwm.
At all.. when you press the button without a connection to anything it just shuts down ;D
szunyi77 said:
Possibly youtube video? May the ruin be backup with this procedure? Baggier Ira one possibly?!
My need would be original ruin rescue.
thank you
Click to expand...
Click to collapse
Sorry, i don´t realy understand what you mean..
restore
Hi
I tried it and it works to backup ...
just do not understand this sentence ...
"NOTE:
-
- This version of CWM has a restore bug, so you should not restore a nandroid backup with this version! "
Works the restore it?
This means that you do not restore the saved rom?
I'm sorry if you do not understand, I can not english.Google translator!
Thanks
szunyi77 said:
Hi
I tried it and it works to backup ...
just do not understand this sentence ...
"NOTE:
-
- This version of CWM has a restore bug, so you should not restore a nandroid backup with this version! "
Works the restore it?
This means that you do not restore the saved rom?
Click to expand...
Click to collapse
When you restore via recovery(ENG).apk then your phone will brick!
So just restore with the temp recovery.
Finally! I hope we'll get a more stable version soon and custom ROM's!
Oh great I've a Motoluxe
Please help me...see
E:Missing bitmap icon_clockwork
(Code -1)
CWM-based Recovery v5.0.2.8
Installing: /sdcard/CWM-6.0.1.4.zip
Finding update package...
Opening update package...
Installing update...
Insyallation aborted
I was wondering if anyone has found a way to get root on this phone. I am pretty new at this, although I was able to root my other phone, wildfire S, I cant seem to find anything for this motoluxe
Thanks
Detonatte said:
Please help me...see
E:Missing bitmap icon_clockwork
(Code -1)
CWM-based Recovery v5.0.2.8
Installing: /sdcard/CWM-6.0.1.4.zip
Finding update package...
Opening update package...
Installing update...
Insyallation aborted
Click to expand...
Click to collapse
You don´t flash CWM-6.0.1.4 via CWM ! ! !
Read the instruction!
Unzip the package on a PC running Windows. Click on a file with the extension ".bat".
Any further instructions are mentioned in the window that will pop up!
mthrichard said:
I was wondering if anyone has found a way to get root on this phone. I am pretty new at this, although I was able to root my other phone, wildfire S, I cant seem to find anything for this motoluxe
Thanks
Click to expand...
Click to collapse
I´ll write a instruction it´s realy simple
luxxx123 said:
You don´t flash CWM-6.0.1.4 via CWM ! ! !
Read the instruction!
Unzip the package on a PC running Windows. Click on a file with the extension ".bat".
Any further instructions are mentioned in the window that will pop up!
I´ll write a instruction it´s realy simple
Click to expand...
Click to collapse
I was able to figure it out last night. Took a couple of days and a few tries. Found a website in French that explained it (luckily I know french very well). At first I had problems getting SUTLR to patch correctly, ADB drivers and moto drivers and different SUTLR versions later I got that working.
Then couldn't get SuperOneClick to actually root it, stuck at the "getting mount path". Tricky getting to time it right with rebooting the phone and opening that application, but after 3-4 times, got it rooted. Got the separate partition made and using link2sd too. All is well now
Remove recovery
Hi, how to remove the device from the root Installable Recovery?
The application is removed, but the root is still working!
Solution?
Or, do not hurt me!
thank you
szunyi77 said:
Hi, how to remove the device from the root Installable Recovery?
The application is removed, but the root is still working!
Solution?
Or, do not hurt me!
thank you
Click to expand...
Click to collapse
You want to remove the installed CWM? That gets executed via APK?
Should be realy easy just delete the "battery_charger"-symlink and paste in the original file.
When you want to unroot your phone, you have to flash a sbf or do a factory reset.
hi
i have some questions
with the temp recovery i can flash with cyanogen9?
sorry form my english, is very bad
daerck said:
hi
i have some questions
with the temp recovery i can flash with cyanogen9?
sorry form my english, is very bad
Click to expand...
Click to collapse
Of course not.. or not yet.. or never.
Because theres no CM9-ROM for the Motoluxe. And i think there never will be one.
trying 6.015...
Finding update package...
Opening update package...
Installing update...
Insyallation aborted...
What should i do?
haelium said:
trying 6.015...
Finding update package...
Opening update package...
Installing update...
Insyallation aborted...
What should i do?
Click to expand...
Click to collapse
What update.zip do you want to flash?
First, I'm a total nubie to Android devices. I'm using Sony Xperia tipo dual (ST21i2, ICS 4.0.4, 11.0.A.1.8). Here's the chronology to my problem.
I tried to root my phone using the steps from the following page:
http://forum.xda-developers.com/showthread.php?t=1886460
Everything ran smooth, the root was successful (I checked it with "Root Checker Pro 1.2.8" and it said I get root access).
So one day I installed "Font Changer 2.1.0" (it needs root access), and it said the BusyBox installed was not compatible. I downloaded "BusyBox Pro 9.6.3" and installed it. Font Changer could run then, though it failed to change the phone's font.
I uninstalled Font Changer and "BusyBox Pro 9.6.3" I just installed. When uninstalling "BusyBox Pro 9.6.3", it asked whether to use "Smart uninstall" or "Normal uninstall". Because I'm no smart in things like this, I chose "Smart uninstall". Uninstall was successful but it said my system is unusable anymore.
I tried using "Backup and reset" feature and selected "Factory data reset". Everything seemed to be reset, my phone is running normal.
Then I tried rooting my phone again using the same file and the same procedure. The command-prompt window said the rooting was successful. I checked it with "Root Checker Pro 1.2.8" and it said I have root access. But there was no SuperSU icon on the app interface like the first-time root. Another problem is that when I installed some apps that need root access, they said that the phone has not been rooted, and when I was installing "BusyBox Pro 9.6.3" it said the 'su binary' is not found (I did "Factory data reset" two more times but obtained the same result).
So, I was thinking of flashing my phone using an "ST21i2_11.0.A.1.8_SI 1264-2819.2 AR_EN_FA_FR.ftf" file and "Flashboot 0.9.9.0" I downloaded from the following page:
http://androxyde.github.com/index.html?1355451208000
I installed "Flashboot 0.9.9.0", but there seems to be a problem with the language GUI. Please see the screenshot below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(I checked the file "config.properties" in the "C:\Flashtool" directory, and the language option is "en", which means English. The language file "en.properties" also exists in the "C:\Flashtool\x10flasher_lib\langs" directory.)
So I used my experience with user interface and tried doing the flashing. But here is the flashing log:
Code:
14/015/2012 07:15:17 - INFO - <- This level is successfully initialized
14/015/2012 07:15:17 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-13 22:53:30
14/015/2012 07:15:17 - INFO - You can drag and drop ftf files here to start flashing them
14/015/2012 07:15:29 - INFO - Device disconnected
14/019/2012 07:19:24 - INFO - Device connected with USB debugging on
14/019/2012 07:19:29 - INFO - Connected device : ST21
14/019/2012 07:19:29 - INFO - Installed version of busybox : N/A
14/019/2012 07:19:29 - INFO - Android version : 4.0.4 / kernel version : /system/bin/sh: /data/local/tmp/busybox1: cannot execute - Permission denied / Build number : 11.0.A.1.8
14/019/2012 07:19:29 - INFO - Phone in recovery mode
14/019/2012 07:19:29 - INFO - Root Access Allowed
14/019/2012 07:19:45 - INFO - Selected ST21i2_11.0.A.1.8_SI 1264-2819.2 AR_EN_FA_FR.ftf
14/019/2012 07:19:45 - INFO - Preparing files for flashing
14/020/2012 07:20:22 - INFO - Please connect your device into flashmode.
14/020/2012 07:20:50 - INFO - Device disconnected
14/020/2012 07:20:59 - INFO - Device connected with USB debugging off
14/020/2012 07:20:59 - INFO - For 2011 devices line, be sure you are not in MTP mode
14/021/2012 07:21:06 - INFO - Device disconnected
14/021/2012 07:21:10 - INFO - Opening device for R/W
14/021/2012 07:21:11 - INFO - Start Flashing
14/021/2012 07:21:11 - INFO - Processing loader
14/021/2012 07:21:11 - INFO - Checking header
14/021/2012 07:21:11 - INFO - Ending flash session
14/021/2012 07:21:11 - ERROR -
14/021/2012 07:21:11 - ERROR - Error flashing. Aborted
14/021/2012 07:21:13 - ERROR - Drivers need to be installed for connected device.
14/021/2012 07:21:13 - ERROR - You can find them in the drivers folder of Flashtool.
I have installed the "flashtool-drivers.exe" in the "C:\Flashtool\drivers" directory. So here I concluded that Xperia tipo dual might not be supported yet (is it true?).
But there is another problem I need to ask. When I connected the phone into flashmode (phone turned off, pressing "VolumeDown" key as the phone is connected to PC, the LED becomes green), there was a new-device-connected notification on the taskbar and a notification bubble that said "SEMC Flash Device". But at that very moment my PC was not responding and I had to perform forced shut-down.
I also tried unlocking my phone's bootloader using the instructions on this page:
http://unlockbootloader.sonymobile.com/
but the same thing occured (non-responding PC) when I connected the powered-off phone while pressing "VolumedDown" key to enter flashmode. (I use an old PC running Windows XP SP3, Pentium IV 2.13 GHz, 1GB RAM. Does it affect?)
The main question is: how can I flash my Sony Xperia tipo dual?
Any comments, feedbacks, and solutions are greatly appreciated. I'm a nubie here, so please correct me if I said anything wrong. Thanks.
(Forgive my English, I'm a non-native speaker)
gilang1kb said:
But there is another problem I need to ask. When I connected the phone into flashmode (phone turned off, pressing "VolumeDown" key as the phone is connected to PC, the LED becomes green), there was a new-device-connected notification on the taskbar and a notification bubble that said "SEMC Flash Device". But at that very moment my PC was not responding and I had to perform forced shut-down.
Click to expand...
Click to collapse
You need to sort that out then, connect your Phone normally and uninstall it in Device Manager on the PC. When you've cleaned your PC Reconnect your Phone in flashmode and let the drivers install before moving on to the next step.
Problem solved. Tried flashing my phone using Windows 7 and everything ran well (as long as I followed the instructions provided). The problem was with my Windows XP, I don't know why (my Windows XP OS is a (highly) customized one and I can't figure out why it wouldn't work for flashing my Xperia Tipo Dual). The Flashboot's language interface also displayed well when I installed it on Windows 7. Thanks a lot anyway for the response. :good:
finally got it to work,i downloaded the latest flashtool and tested to rake out the sim card and sd card and it finally worked,thanks to everybody who tried to help me!
Give me the log so I can help you
Sent from my ST21i using Tapatalk 4 Beta
SW3D3N said:
Hi,as the title says,flashtool is always stuck at 0% :crying: .I've installed the drivers,tried different versions of FT ,tried on another pc ( windows 8) but it says error- error flashing aborted . my phone is soft bricked,it got bricked after i tried to change my font trough iFont even though ive changed my font multiple times trough the app .I'm getting really desperate and I would appreciate any help, Thanks in advance
Click to expand...
Click to collapse
Earlier, I had also Faced the Same Problem. But I Flashed it With The Flashtool. Install the Flashtool, Put the FTF File in "C:\Flashtool\firmwares" Folder. Open ur Flashtool.exe, Now Click on Thunder Symbol > Then FlashMode
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Choose FTF for ur Device Which u have Downloaded or Try to Download Another.. if its not Working..
The Click on Flash
The See in the Log
then
Unplug ur Device
Power Off
Connect ur Phone Using Vol Down Key.. Using ur USB Cable
it Starts Automatically..
If I helped You Then Please Vote/Click on Thanks..
i know how to flash but it is always stuck at 0 percent when i do it
Dude can u try in a Windows 7 pc??
Also have u installed flashmode drivers from drivers folder?
Sent from my C1604 using xda app-developers app
yes, my main pc is running windows7 but in flashtool it gets stuck at 0 and pcc and seus downloads the update but they get stuck on installing and then they end the flashing session.My phone also stops glowing green when the update begin.
Buddy try Emma (Official flashtool from Sony)
I think she can help you
Thank me if I helped you
Sent from my C1604 using xda app-developers app
mathewsj114 said:
Buddy try Emma (Official flashtool from Sony)
I think she can help you
Thank me if I helped you
Sent from my C1604 using xda app-developers app
Click to expand...
Click to collapse
but isnt it just for unlocked bootloaders?
dude post the log. Maybe it can be solved easily with flashtool
Sent from my ST21i using Tapatalk 4 Beta
25/005/2013 01:05:24 - INFO - <- This level is successfully initialized
25/005/2013 01:05:24 - INFO - Flashtool Version 0.9.8.0 built on 2012-10-01 19:35:32
25/005/2013 01:05:24 - INFO - You can drag and drop ftf files here to start flashing them
25/005/2013 01:05:29 - INFO - Selected ST23i_11.0.A.5.5_Generic.ftf
25/005/2013 01:05:29 - INFO - Preparing files for flashing
25/005/2013 01:05:30 - INFO - Device disconnected
25/005/2013 01:05:45 - INFO - Please connect your device into flashmode.
25/005/2013 01:05:55 - INFO - Device connected in flash mode
25/005/2013 01:05:55 - INFO - Opening device for R/W
25/005/2013 01:05:56 - INFO - Reading device information
25/005/2013 01:05:56 - INFO - Phone ready for flashmode operations.
25/005/2013 01:05:56 - INFO - Start Flashing
25/005/2013 01:05:56 - INFO - Processing loader
25/005/2013 01:05:56 - INFO - Checking header
25/005/2013 01:05:56 - INFO - Flashing data
Click to expand...
Click to collapse
here's the log, sorry for the late respons
SW3D3N said:
here's the log, sorry for the late respons
Click to expand...
Click to collapse
I'm thinking that the firmware file you are trying to use has got the vengeance kernel embedded in it, you can't use a custom kernel with a locked bootloader.
Either unlock your bootloader and try to flash the kernel or find the stock kernel, flash that and then unselect the kernel from the firmware file.
no,its a sttock ftf file from option58's thread an I've tried 3 different files but the result is the same
any body?
SW3D3N said:
no,its a sttock ftf file from option58's thread an I've tried 3 different files but the result is the same
Click to expand...
Click to collapse
Untick the box what says 'Flash Kernel' in the firmware selection box. See if that works.
Redownload or re install flashtool.
Send from Malaysia by Xperia J
already tried different versions of flashtool
gamer649 said:
Untick the box what says 'Flash Kernel' in the firmware selection box. See if that works.
Click to expand...
Click to collapse
will try,thanks
SW3D3N said:
will try,thanks
Click to expand...
Click to collapse
Please let me know how it goes, PM me if you need more help.
gamer649 said:
Please let me know how it goes, PM me if you need more help.
Click to expand...
Click to collapse
same problem,nothing changed
help
plz help anybody. any help is appritiated and woth a try
Antecipating issues in this matter, and mostly because of my experience on a Gionee phone, being about a month with the phone turned to a brick...
Looking for answers and help some times takes to long, and most of us desesperate...
So i thought to gather all in this matter in just one thread, all centrelized, and easy to access if any of us gets bricked...
UNBRICK LeEco Le 2
To use with this method: Youtube || Forum LE (Forum OffLine)
Files:
Drivers
General QDLoader x86/x64 - DOWNLOAD
2017 Version for Win10 - DOWNLOAD
Flash Tools
FlashOne 1.9 - DOWNLOAD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FlashOne 2.0 - DOWNLOAD
QFIL - DOWNLOAD
Flash Sparse ROMs
x520 - DOWNLOAD
x526 - DOWNLOAD
x527 - Unavailable Please share if you found it....
Qualcomm IMEI Fixing Tool - DOWNLOAD
17March2021 Update
The links for the ROMs and the IMEI Fixing tool were fixed.
All links tested OK
Please, if you think that is something missing here, please dont be shy... share it...
I would like to share with u all the International Version ROM x527 and also the American Version x522, but haven't found them yet....
error
Please don't contain blank space in tool path when i try to flash this error shows fed up trying everything nothing works any solution please help and if you now how to flash common fasstboot method please tell
GauravGandhi said:
Please don't contain blank space in tool path when i try to flash this error shows fed up trying everything nothing works any solution please help and if you now how to flash common fasstboot method please tell
Click to expand...
Click to collapse
Please, make sure that the Flash Type is : " Qualcomm - flash dead phone".
If it is, use 2.0 version.
If you get the same error, extract the rom file to a folder and use QFIL (just uploaded)
RSGI
Is there an video of qfil or else steps to flash it through qfil and i have tried it with both flashone same eror ...
Anyone help me please,
After unzipping it is showing mainfeast.xml file is missing
skishoreraju said:
Anyone help me please,
After unzipping it is showing mainfeast.xml file is missing
Click to expand...
Click to collapse
do not unzip, select the zip file
RSGI said:
do not unzip, select the zip file
Click to expand...
Click to collapse
i did not unzipped it, flashone tool will unzip the files after that i an getting the error message.
Now i have new error , please help mee
I had similar problems with x520 (snap 652). No Baseband and No Imei.
I will tell you what I did for solve it
EDIT: I've found that the first part is not necessary.
1. Activate developer options and enable this options: OEM unlocking and USB debuging. Power off the phone
2. Put phone into Fastboot mode. Vol - + Power
3. Use adb to unlock bootloader and install TWRP as recovery
4 Download this rom to flash by TWRP: https://devs-lab.com/download-letv-official-stock-rom.html * The one for x520 (Qualcomm)
5. In TWRP select Wipe and do a dirty or clean (as you want) wipe before flash the rom, once it's done go back to menu, copy the ROM (zip) into the internal memory of the phone and flash it!
6. Reboot and wait till phone boots
7. Baseband and IMEI's back working!
My problems were solved doing this.... still don't know why... but worked
Hope will help anyone with similar problems
PD: Sorry for my english, isn't my mother language.
Greetings
Is it possible to use either x520 or x526 files to recover x522 device?
skishoreraju said:
i did not unzipped it, flashone tool will unzip the files after that i an getting the error message.
Now i have new error , please help mee
Click to expand...
Click to collapse
Did you get it resolved?
nadeem_naddy said:
Did you get it resolved?
Click to expand...
Click to collapse
Not yet, searching for another methods
skishoreraju said:
Not yet, searching for another methods
Click to expand...
Click to collapse
You need to download correct rom and here it is -
https://mega.nz/#!tUQG2SCA!CPCYrZdNl0Sj1y0GNnxvLb5iISeHyffyf_WtwjdgS8A
Thanks great to see the X520 sparse here too , just one problem, after following qualcomm guide to format and erase all partitions, something has gone wrong but I don't know how to fix it !
IMEI and baseband are showing fine but in the settings / about phone / ststus sim card is showing radio off, it still reads the network and my phone number from the card and any other card I have tried but I cn't switch on the radio even in *#*#4636#*#* menu !
Has someone come across this ? How to fix it ?
Sir, I am not able to restore my IMEI and wifi. Can you please help ? Thank you
any updates
Can i use this method to bring back my phone to stock from custom recovery and rom
priyabrata12345 said:
Sir, I am not able to restore my IMEI and wifi. Can you please help ? Thank you
Click to expand...
Click to collapse
Check my post here https://forum.xda-developers.com/le-2/help/qcn-file-leeco-le2-x526-indian-version-t3692033
It MAY help
Hi sir! Can I use this to bypass Leeco account as well? My Le 2 x520 is stucked at start up guide (Leeco Account verification) as I lost the password and other means to retrieve it. Thank you!
lloyd.lemoncito said:
Hi sir! Can I use this to bypass Leeco account as well? My Le 2 x520 is stucked at start up guide (Leeco Account verification) as I lost the password and other means to retrieve it. Thank you!
Yes, use X526 Indian version there you skipped leeco account.
Click to expand...
Click to collapse
AVrawat said:
lloyd.lemoncito said:
Hi sir! Can I use this to bypass Leeco account as well? My Le 2 x520 is stucked at start up guide (Leeco Account verification) as I lost the password and other means to retrieve it. Thank you!
Yes, use X526 Indian version there you skipped leeco account.
Click to expand...
Click to collapse
Thank you sir. Any pointers on what tools I can use? I am unable to use twrp and adb
Click to expand...
Click to collapse