Hello everyone !
Do you know if there is a kernel that would allow me to use SLIMPORT and FAST CHARGE at the same time ?
Or if not, is there any slimport adaptor that would allow extra power supply ?
stadros83 said:
Hello everyone !
Do you know if there is a kernel that would allow me to use SLIMPORT and FAST CHARGE at the same time ?
Or if not, is there any slimport adaptor that would allow extra power supply ?
Click to expand...
Click to collapse
Hi i m using SOOPLUS kernel and in aroma installer there is option for FAST CHARGE i havent tried it , but you can . It also makes backup of your current kernel so you can go back if you dont like it
tvrtkocro28 said:
Hi i m using SOOPLUS kernel and in aroma installer there is option for FAST CHARGE i havent tried it , but you can . It also makes backup of your current kernel so you can go back if you dont like it
Click to expand...
Click to collapse
Thanks but I think that is the same problem with the other kernel, it enables the Fast Charging but not for SLIMPORT ?
Related
Im using CM 10.1 for GT-P3100.. With " blackhawk_kernel 0.3 landscape " which gave the ability to control voltage
I want to know the minimum voltage i can do.. With no problems in the tab !?
Thanks you
yokio7 said:
Im using CM 10.1 for GT-P3100.. With " blackhawk_kernel 0.3 landscape " which gave the ability to control voltage
I want to know the minimum voltage i can do.. With no problems in the tab !?
Thanks you
Click to expand...
Click to collapse
probably best to post to the kernel thread and ask
http://forum.xda-developers.com/showthread.php?t=2156684
hello,
I installed this version and is really running smooth, included GPS after the fix.
The only problem I have at the moment is charging the battery when power is off.
There is no ' animation' visible when charging.
JohnKersten said:
hello,
I installed this version and is really running smooth, included GPS after the fix.
The only problem I have at the moment is charging the battery when power is off.
There is no ' animation' visible when charging.
Click to expand...
Click to collapse
I have no ssue with CM10 from Ivendor. So it's ROM related problem.
It's a known issue know.
JohnKersten said:
I have no ssue with CM10 from Ivendor. So it's ROM related problem.
It's a known issue know.
Click to expand...
Click to collapse
Charge animation was not available in this ROM http://www.mediafire.com/?xj39pa7mokcikxc
Problem solved
I want to change the battery charging animation that lights up when the phone is charged while it is still switched-off.
Can someone share the the path of the system file/folder which must be modded to change the animation or maybe replacing the PNG files?
i have searched the web for this for quit some time didn't find anything. so hopefully i can get some help with this making this post.
I am using a Galaxy note N7000 and its running on Cyanogenmod 10.2.
If someone could help me out with this that would be great. Thanks
From what I read it isn't something related to Android (like the Kernel) but in the Bootloader.
Chainfire made an app for some devices, see:
https://play.google.com/store/apps/details?id=eu.chainfire.nomoarpowah
In a comment a user writes that it works on the Note (stock, rooted). See and try for yourself.
thanks for your reply but i need to change my battery animation completely like how its charging .
this app only let me use their default design.
hope i still get an instruction how to change the battery animation on cm and by battery animation i mean the charging battery animation when you phone is switched off and charging.
symb1an said:
thanks for your reply but i need to change my battery animation completely like how its charging .
this app only let me use their default design.
hope i still get an instruction how to change the battery animation on cm and by battery animation i mean the charging battery animation when you phone is switched off and charging.
Click to expand...
Click to collapse
And if you read what I wrote or if you would have searched yourself in XDA for this you might accept that this is difficult (and until now only Chainfire made it which is a message by itself).
So no "instructions" but real development.
And why "I need"? It's only a gimmick changing animations, no real advanced feature, isn't it?
ThaiDai said:
And if you read what I wrote or if you would have searched yourself in XDA for this you might accept that this is difficult (and until now only Chainfire made it which is a message by itself).
So no "instructions" but real development.
And why "I need"? It's only a gimmick changing animations, no real advanced feature, isn't it?
Click to expand...
Click to collapse
IN MTK PHONES ITS POSSIBLE AND VERY EASY
just use the logo builder extract the logo.bin edit it with the images you want and repack it it works 1000%
but i have not yet tested in other models but very sure with mtk
.
jroki said:
IN MTK PHONES ITS POSSIBLE AND VERY EASY
just use the logo builder extract the logo.bin edit it with the images you want and repack it it works 1000%
but i have not yet tested in other models but very sure with mtk
Click to expand...
Click to collapse
i cant find it (logo.bin) im using honor 5x kiw-l21 resurrection remix 5.8.5 rom
UPDATE-
Battery Charging Rate is never ever Better than this...
Device Redmi 3s Prime
+2838mAh
Beacon Kernel
Quick charge 3.0 Magisk Module and charger
Nitrogen OS ROM
Because stock redmi 3s prime doesn't give this much charge rate...
Show your's default charge rate of Redmi 3s Prime.
It is essential to compare.:highfive:
This is work for ROM based CM/AOSP?
adityaon said:
Battery Charging Rate
Device Redmi 3s Prime
Mine +1437mA
Stock Kernel
One script that will be revealed soon.
Rooted Miui 8
Show your's default charge rate of Redmi 3s.
Click to expand...
Click to collapse
only for miui?
pavan.sampara said:
only for miui?
Click to expand...
Click to collapse
i think it will work on both
adityaon said:
Battery Charging Rate
Device Redmi 3s Prime
Mine +1437mA
Stock Kernel
One script that will be revealed soon.
Rooted Miui 8
Show your's default charge rate of Redmi 3s.
Click to expand...
Click to collapse
If you're making script. please make it compatible with nougat based roms.
Sanketg2112 said:
If you're making script. please make it compatible with nougat based roms.
Click to expand...
Click to collapse
whats ur currently battery charge rate?
You guys know custom kernels already allow that charge speed thats why this script is targeted for miui users...
Our charger has a 2A out that is 2000ma so 1439 is very low i usually get around 1800 -1900 ma out from the day i bought this device there is no need of any script or anything
sangalaxy said:
Our charger has a 2A out that is 2000ma so 1439 is very low i usually get around 1800 -1900 ma out from the day i bought this device there is no need of any script or anything
Click to expand...
Click to collapse
Can u post screenshot prove then? Me myself had a qc 2.0 supportrd charger and still got arround 1500
faatihf said:
Can u post screenshot prove then? Me myself had a qc 2.0 supportrd charger and still got arround 1500
Click to expand...
Click to collapse
Now am using a custom rom but in miui also i used to get this much
sangalaxy said:
Now am using a custom rom but in miui also i used to get this much
Click to expand...
Click to collapse
Why I hardly to get above 1500 ? what is ur current ROM now? I guess my charger is the prob
faatihf said:
Why I hardly to get above 1500 ? what is ur current ROM now? I guess my charger is the prob
Click to expand...
Click to collapse
Now am using darkness redefined naugat ...
I guess you should try with another charger or cable our device supports 2000ma there will be a lil difference according to temp of battery so try to charge your phone in a cooled condition ie:below 35°c
sangalaxy said:
Now am using darkness redefined naugat ...
I guess you should try with another charger or cable our device supports 2000ma there will be a lil difference according to temp of battery so try to charge your phone in a cooled condition ie:below 35°c
Click to expand...
Click to collapse
The problem might coz of my current ROM. I rarely charge my phone during the day tho, I never runs out of battery before it's time to sleep, just in case I need that "quick" charge. Well migrate to that rom too thanks to u ?
sangalaxy said:
Now am using darkness redefined naugat ...
I guess you should try with another charger or cable our device supports 2000ma there will be a lil difference according to temp of battery so try to charge your phone in a cooled condition ie:below 35°c
Click to expand...
Click to collapse
Bro use darkness redefinder naugat , I am also using this rom . Yup Its really charging battery much faster than stock rom. :good:
any one cheak that on custom rom plz
I'm currently on Resurrection remix on my Redmi 3s prime. Will it work on this as well? And I guess it wouldn't ruin the device or something if I do this right?? And I wanna ask if we have to remove the double quotes just in the beginning and ending of the code or even in the numbers in between the code??
quadri0 said:
I'm currently on Resurrection remix on my Redmi 3s prime. Will it work on this as well? And I guess it wouldn't ruin the device or something if I do this right?? And I wanna ask if we have to remove the double quotes just in the beginning and ending of the code or even in the numbers in between the code??
Click to expand...
Click to collapse
remove first and last commas
i am getting only 660 mA ?? why does anyone know why ?? i am suing lineage os 14.1 latest build
On MultiRom I noticed about 2000mA on stock charger when the battery level is low, so what this script can do?
adityaon said:
Battery Charging Rate
Device Redmi 3s Prime
+1437mA
Stock Kernel
I Think because of A script it happened.
One script that will be revealed soon.
Just judge the performance after A script.
Because stock redmi 3s prime doesn't give this much charge rate.
Rooted Miui 8
Show your's default charge rate of Redmi 3s Prime.
It is essential to compare.:highfive:
Edit:-Kernel auidtor needed and Rooted device.
Paste this code in init.d section of kernel auidtor and save it and tick apply on boot or manually execute script.
Replug charger and notice the battery rate via Accubattery app.
Remove first and last double inverted commas
Code- "#!/system/bin/sh
chmod 777 /sys/module/qpnp_smbcharger/parameters/default_dcp_icl_ma; chmod 777 /sys/module/qpnp_smbcharger/parameters/default_hvdcp_icl_ma; chmod 777 /sys/module/qpnp_smbcharger/parameters/default_hvdcp3_icl_ma; chmod 777 /sys/module/dwc3_msm/parameters/hvdcp_max_current; chmod 777 /sys/module/dwc3_msm/parameters/dcp_max_current; echo "1900" > /sys/module/qpnp_smbcharger/parameters/default_dcp_icl_ma; echo "1900" > /sys/module/qpnp_smbcharger/parameters/default_hvdcp_icl_ma; echo "1900" > /sys/module/qpnp_smbcharger/parameters/default_hvdcp3_icl_ma; echo "1900" > /sys/module/dwc3_msm/parameters/hvdcp_max_current; echo "1900" > /sys/module/dwc3_msm/parameters/dcp_max_current;"
Please check if the script works.
Click to expand...
Click to collapse
Can I use in viper coral ROM and how do I use it could you explain with video tutorial please
hello, thanks for ur read, n please report issues if u upgraded to 7.0 n using now.
Please let me know about:
1. Battery life
2. Performance
3. Battery charging not up during using
4. Better than 6.0 n good daily drive.
5. Playing game e.g COC: battery n phone temperature.
6. Can root but xposed not supports stock ROM
thank you all ur read n report [emoji4]
Sent from my SM-G925I using XDA-Developers Legacy app
1. For me is nice enough, with good settings on S8 port Noble ROM and good N0G33K kernel is even about ~6h SoT.
2. Even after underclocked, undervolted and on battery saver mode (medium) is smoothly, fast and nice
Don't understand good but yes it's working and isn't problem xD
4. Newest so just better... Must be
5. After UC and UV phone is really much more colder then before even "in stress", I don't playing so much in games but after "my tweaks" which I wrote in point 2 I had ~75k in AnTuTu Benchmark.
6. Every ROM you can root or not, Xposed also is for Nougat ROM's but for me isn't stable and usable enough yet and not compatible with SafetyNET etc.
Sry for my English. BTW look my signature on what i'm. Check also my posts there are some informations how and what to do.
rifek4 said:
1. For me is nice enough, with good settings on S8 port Noble ROM and good N0G33K kernel is even about ~6h SoT.
2. Even after underclocked, undervolted and on battery saver mode (medium) is smoothly, fast and nice
Don't understand good but yes it's working and isn't problem xD
4. Newest so just better... Must be[emoji14]5. After UC and UV phone is really much more colder then before even "in stress", I don't playing so much in games but after "my tweaks" which I wrote in point 2 I had ~75k in AnTuTu Benchmark.
6. Every ROM you can root or not, Xposed also is for Nougat ROM's but for me isn't stable and usable enough yet and not compatible with SafetyNET etc.
Sry for my English. BTW look my signature on what i'm. Check also my posts there are some informations how and what to do.
Click to expand...
Click to collapse
Yup, I see. thanks bro
many users report that battery charging not up while using n only drain the battery. Now I just wait for xposed to be stable n good daily drive. Otherwise only custom rom is better than stock.
Sent from my SM-G925I using XDA-Developers Legacy app
SXS4 said:
Yup, I see. thanks bro
many users report that battery charging not up while using n only drain the battery. Now I just wait for xposed to be stable n good daily drive. Otherwise only custom rom is better than stock.
Sent from my SM-G925I using XDA-Developers Legacy app
Click to expand...
Click to collapse
For me custom ROM gives all better then stock, include battery life, stability, performance, temperatures etc
rifek4 said:
For me custom ROM gives all better then stock, include battery life, stability, performance, temperatures etc
Click to expand...
Click to collapse
yup, I just wait for xposed
SXS4 said:
yup, I just wait for xposed
Click to expand...
Click to collapse
Just wait? Let me know when will be ready then ofc, maybe I will switch to stock
rifek4 said:
Just wait? Let me know when will be ready then ofc, maybe I will switch to stock
Click to expand...
Click to collapse
I mean I wait for the xposed in stable with 7.0+, not depend on what ROM
Sent from my SM-G925I using XDA-Developers Legacy app
SXS4 said:
I mean I wait for the xposed in stable with 7.0+, not depend on what ROM
Sent from my SM-G925I using XDA-Developers Legacy app
Click to expand...
Click to collapse
I mean that can take little bit time yet...
rifek4 said:
For me custom ROM gives all better then stock, include battery life, stability, performance, temperatures etc
Click to expand...
Click to collapse
Any bug sir on theat ROM?
Camera is same at normal ROM or is more bead?
and battery? how much more is it better?
proart.alex14 said:
Any bug sir on theat ROM?
Camera is same at normal ROM or is more bead?
and battery? how much more is it better?
Click to expand...
Click to collapse
Any bugs... Everything works fine. About camera... For me camera from [email protected] Port Rom is much better then before, after install ZeroCameraMod v3 is reaaaally pro-camera. About battery, with that ROM, kernel etc what you see in my signatures + my own Synapse configuration and for example for now my phone is ~22h in standby with ~3,5h SoT and is ~30% battery yet