[Q] Unofficial LiquidSmooth-JB-v2.4 [Build 3] -- kernel 3.0 - General Questions and Answers

hello,
I installed this version and is really running smooth, included GPS after the fix.
The only problem I have at the moment is charging the battery when power is off.
There is no ' animation' visible when charging.

JohnKersten said:
hello,
I installed this version and is really running smooth, included GPS after the fix.
The only problem I have at the moment is charging the battery when power is off.
There is no ' animation' visible when charging.
Click to expand...
Click to collapse
I have no ssue with CM10 from Ivendor. So it's ROM related problem.
It's a known issue know.

JohnKersten said:
I have no ssue with CM10 from Ivendor. So it's ROM related problem.
It's a known issue know.
Click to expand...
Click to collapse
Charge animation was not available in this ROM http://www.mediafire.com/?xj39pa7mokcikxc
Problem solved

Related

[KERNEL][GT-P51XX][4.0.4] blamesamsung kernel for stock samsung roms [FAST | NO LAGS]

This kernel is based on official samsung kernel sources with pvr drivers from maguro and cifs support to make stock roms less lagging/sucking.
It will fix any lag you're having and highly increase performance in games.
Finally you can enjoy your tablet like it should be since the first day. #blamesamsung
Don't use this kernel on aosp based roms like CyanogenMod!!!
Instructions:
- Download kernel zip
- Copy to sdcard
- Reboot into CWM-Recovery
- Flash it
- Reboot and have fun
Downloads:
v4 - http://d-h.st/CRj
v3 - http://d-h.st/oLl
Sources: https://github.com/codeworkx/GT-P51xx_blamesamsung_kernel
Hangs
codeworkx said:
This kernel is based on official samsung kernel sources with pvr drivers from maguro and cifs support to make stock roms less lagging/sucking.
Currently rarely tested. Lemme know if something goes wrong.
Instructions:
- Download kernel zip
- Copy to sdcard
- Reboot into CWM-Recovery
- Flash it
- Reboot and have fun
Downloads:
v1 - http://d-h.st/uFd
Sources: https://github.com/codeworkx/GT-P51xx_blamesamsung_kernel
Click to expand...
Click to collapse
Hangs at Samsung Galaxy Tab 2 screen.
gochiefs said:
Hangs at Samsung Galaxy Tab 2 screen.
Click to expand...
Click to collapse
log or it didn't happen.
adb logcat
You could also try to do a factory reset.
hangs
codeworkx said:
log or it didn't happen.
adb logcat
You could also try to do a factory reset.
Click to expand...
Click to collapse
Have to download adb. I did go through the process again with a factory reset and a cache wipe, same results, i do however hear the start music in the background, but it still just sticks on the galaxy tab 2 screen.
thank you
Hangs
Here is the logcat http://pastebin.com/AMbDdGa4
gochiefs said:
Here is the logcat http://pastebin.com/AMbDdGa4
Click to expand...
Click to collapse
Thanks.
Try this: http://d-h.st/wwj
hangs
codeworkx said:
Thanks.
Try this: http://d-h.st/wwj
Click to expand...
Click to collapse
Seems to be fixed. Installed and booted right up. Havent done much with it, but there doesnt seem to be any scroll lag like i was experiencing with stock. Will let you know if i find any other issues.
gochiefs said:
Seems to be fixed. Installed and booted right up. Havent done much with it, but there doesnt seem to be any scroll lag like i was experiencing with stock. Will let you know if i find any other issues.
Click to expand...
Click to collapse
Yep, flashed my tab back to stock rom. Really a big difference now.
Wonder how samsung can ship such a ****ty and lagging stock rom to customers.
It's a shame.
codeworkx said:
Yep, flashed my tab back to stock rom. Really a big difference now.
Wonder how samsung can ship such a ****ty and lagging stock rom to customers.
It's a shame.
Click to expand...
Click to collapse
Same here. With how smooth this kernel is, i dont really see a reason to upgrade to one of the Jellybean roms
hi, i installed it, it's a bit smoother but my wi-fi doesn't work now. it can't be turned on, like its disabled. what can i do?
Wifi
s3tiks said:
hi, i installed it, it's a bit smoother but my wi-fi doesn't work now. it can't be turned on, like its disabled. what can i do?
Click to expand...
Click to collapse
Yea, just noticed this issue as well. Bluetooth turns on. Wifi doesnt move
s3tiks said:
hi, i installed it, it's a bit smoother but my wi-fi doesn't work now. it can't be turned on, like its disabled. what can i do?
Click to expand...
Click to collapse
Sorry, samsung has put the kernel modules into the ramdisk and not into /system/lib/modules where they should be. -.-
Use this:
v2: http://d-h.st/Q0w
WiFi works now, but when i do screen lock it automatically reboots? few times already
reboot
s3tiks said:
WiFi works now, but when i do screen lock it automatically reboots? few times already
Click to expand...
Click to collapse
Have the same issue. If the USB cable is plugged in then it works fine, but once the cable is unplugged, if you lock it then it will reboot.
Awesome job codeworkx! You made my day!!
I can really enjoy my tab now without leaving behind my lovely stock apps :good:
I have the same prob with others when screen locks but im sure u will fix it :victory:
Thanx again man !
Thank you codeworkx for giving our Tab 2 some love
heraclis said:
Awesome job codeworkx! You made my day!!
I can really enjoy my tab now without leaving behind my lovely stock apps :good:
I have the same prob with others when screen locks but im sure u will fix it :victory:
Thanx again man !
Click to expand...
Click to collapse
Hello. Does it works with 4.1.1. rom?
mrdaco said:
Hello. Does it works with 4.1.1. rom?
Click to expand...
Click to collapse
No. Need kernel sources first.
Sent from my GT-I9300 using xda app-developers app
Ohh... I hope you will get it soon. I'm looking forward for new 4.1. kernel :victory: I'll buy you a beer for this. :laugh:

[Q] WIFI not working after flashing custom kernel in CM 11

I have tried flashing 2 kernels-
1. Render Kernel AOSP
2. Pink Kernel
After flashing the 1st kernel the phone was stuck at bootlogo.When I flashed the 2nd kernel the phone was working fine but when i turned on the wifi the toggle switch remained greyed out and was not sliding back to off position.I tried rebooting my phone,clearing the cache but nothing worked.Other features in the phone are working properly.
Please help.Thanks in advance.
dhananjay123 said:
I have tried flashing 2 kernels-
1. Render Kernel AOSP
2. Pink Kernel
After flashing the 1st kernel the phone was stuck at bootlogo.When I flashed the 2nd kernel the phone was working fine but when i turned on the wifi the toggle switch remained greyed out and was not sliding back to off position.I tried rebooting my phone,clearing the cache but nothing worked.Other features in the phone are working properly.
Please help.Thanks in advance.
Click to expand...
Click to collapse
I also have the same issues.
But the Linaro kernel forum.xda-developers.com/moto-g/orig-development/kernel-falcon-t2868126 works fine.
This issue is related to Kernel modules. That is why flashing a certain kernel can fix it.
Meuuks13 said:
I also have the same issues.
But the Linaro kernel forum.xda-developers.com/moto-g/orig-development/kernel-falcon-t2868126 works fine.
Click to expand...
Click to collapse
Can you suggest more kernels which work properly in moto g XT1033?
dhananjay123 said:
Can you suggest more kernels which work properly in moto g XT1033?
Click to expand...
Click to collapse
Both of them weren't updated for a longer period. All other should work. Like the green machine or xperience.
k-kuchen said:
Both of them weren't updated for a longer period. All other should work. Like the green machine or xperience.
Click to expand...
Click to collapse
The Insanity (linaro) kernel is updated frequently. Only the OP subject is not updated
You could try 1.7 or 1.8. Dont use 1.9
k-kuchen said:
Both of them weren't updated for a longer period. All other should work. Like the green machine or xperience.
Click to expand...
Click to collapse
Insanity is ipdatesd well, see the github.
I also flashed the green machine on my xt1033 , wifi doesn't work.
Experience causes lags!
justanicename said:
The Insanity (linaro) kernel is updated frequently. Only the OP subject is not updated
You could try 1.7 or 1.8. Dont use 1.9
Click to expand...
Click to collapse
Why I should not use 1.9 ?
dhananjay123 said:
Why I should not use 1.9 ?
Click to expand...
Click to collapse
The developer said that there were some bugs. But try 1.7 or 1.8, they work really good. I prefer 1.7 for now because 1.8 causes somehow more battery drain.
justanicename said:
The developer said that there were some bugs. But try 1.7 or 1.8, they work really good. I prefer 1.7 for now because 1.8 causes somehow more battery drain.
Click to expand...
Click to collapse
Why has the developer removed all the downloads ? Only 2.0 is available for download ! Please can you attach the zip file of 1.7 and post it ?
dhananjay123 said:
Why has the developer removed all the downloads ? Only 2.0 is available for download ! Please can you attach the zip file of 1.7 and post it ?
Click to expand...
Click to collapse
Not sure why he did that..... And now v2.0 is gone, there is a new one with the date as version number. The development of this kernel fast. I havent tried the new one yet
But here is the file for v1.7 (the link will be removed after 21 days)
http://www.fileconvoy.com/dfl.php?id=g7e19482d343b612a9995569008d1b7c821a44f24b
I might move over to Xperience kernel, since the developer is more informative And i also have no problems with wifi with that one.

[ROM] [Q&A] Resurrection Remix ® Lollipop v5.3.0

Feel free to discuss non-development-related topics here or ask any questions you want .
and keep dev thread clean
ROM DEVELOPMENT THREAD : HERE
First of al, thank you this ROM works very well.
I'm experiencing a problem, when the phone has to change from 3G to WiFi or viceversa it is stuck so I hace to switch off and switch on WiFi or 3G to get the phone changes.
Do you know any workaround?
Thanks and sorry for my english level.
The Menu and etc. is just in dark? or white are avaliable?
ZeroDs111 said:
The Menu and etc. is just in dark? or white are avaliable?
Click to expand...
Click to collapse
it's white already
xprxprx said:
First of al, thank you this ROM works very well.
I'm experiencing a problem, when the phone has to change from 3G to WiFi or viceversa it is stuck so I hace to switch off and switch on WiFi or 3G to get the phone changes.
Do you know any workaround?
Thanks and sorry for my english level.
Click to expand...
Click to collapse
no
can use TZ karnel ?
Delvator said:
can use TZ karnel ?
Click to expand...
Click to collapse
Yes
BSOD during charging..... i am on TZ 4.15.........
kumardeepu said:
BSOD during charging..... i am on TZ 4.15.........
Click to expand...
Click to collapse
Then try switching the default kernel come with the ZIP
BTW , i am on TZ4.15 too but didn't get any BSOD
want to report after using this rom for 6 hours in stock kernel
everything is fine, no bsod in stock kernel, very smooth and 5.1.1 :victory: but sometimes AOSP Keyboard fc and stock camera quality is very bad
I switched to default kernal but still bsod is there. and no sound in fm radio......... other then this rom is awesome......
david makarove said:
Then try switching the default kernel come with the ZIP
BTW , i am on TZ4.15 too but didn't get any BSOD
Click to expand...
Click to collapse
If I may ask .. keyboard typing gestures doesn't work. Have anybody find way how to "enable it" ? (An settings it is enabled although it doesn't work.) I'm sure it is not caused by gapps because I use minimal gapps which excludes keyboard.
Here's some review of RR - everything works just fine 2 days of using only one soft reboot till now (on CM 12.1 every few hours). No BSOD with TZ 4.15 system is stable, multitasking is wonderful (I can't tell about consumption because my baterry stats are corupted after fresh install but it seems comparable with other Lolipops )
Music vizualizer on locked screen doesn't work propertly and after reboot icons get bigger till next reboot when they return to right size. I can only wonder why. GPS once stayed "locked" my position (icon on top) like at CM 12 but reboot fixed it (that day I found about changing icon sizes ).
Anyway than you so much David this ROM is awesome
kumardeepu said:
I switched to default kernal but still bsod is there. and no sound in fm radio......... other then this rom is awesome......
Click to expand...
Click to collapse
For BSOD you maybe will need to wait to ger fixed by varun since i don't have enough time
Sorry about that
i will check the FM radio ASAP
Kosa02 said:
If I may ask .. keyboard typing gestures doesn't work. Have anybody find way how to "enable it" ? (An settings it is enabled although it doesn't work.) I'm sure it is not caused by gapps because I use minimal gapps which excludes keyboard.
Here's some review of RR - everything works just fine 2 days of using only one soft reboot till now (on CM 12.1 every few hours). No BSOD TZ 4.15 system is stable, multitasking is wonderful (I can't tell about consumption because my baterry stats are corupted after fresh install but it seems comparable with other Lolipops )
Music vizualizer on locked screen doesn't work propertly and after reboot icons get bigger till next reboot when they return to right size. I can only wonder why. GPS once stayed "locked" my position (icon on top) like at CM 12 but reboot fixed it (that day I found about changing icon sizes ).
Anyway than you so much David this ROM is awesome
Click to expand...
Click to collapse
i will look in the bugs you reported
david makarove said:
For BSOD you maybe will need to wait to ger fixed by varun since i don't have enough time
Sorry about that
i will check the FM radio ASAP
i will look in the bugs you reported
Click to expand...
Click to collapse
no sound in FM radio is cauaed by system/lib/hw/audio.primary.default.so
and audio.primary.msm8960.so
Sent from my C2105 using XDA Free mobile app
Nice Work David
david makarove said:
Feel free to discuss non-development-related topics here or ask any questions you want .
and keep dev thread clean
ROM DEVELOPMENT THREAD : HERE
Click to expand...
Click to collapse
good job man .. you are fantastic

Fix for any LE2X526 MIUI rom's Low Brighness issue.

Hi Guys,
Its a great news for those who want to install MIUI on their LE2X526. Until now, we have been facing low brightness issue with almost all the MIUI roms we had installed till date except one which was a little buggy when applying darker themes and recent apps.
But now, the latest release of AndroModX Kernel(V2) which had been developed by Rishabh Rao can solve this issue. I had installed MIUI Russian official version and along with it, installed AndroModX V2 kernel just to test it out. I had installed the same rom earlier but had uninstalled it due to low brightness issue which was too much strain on eyes and is totally non visible in daylight.
But with AndromodX Kernel, right after the first boot up, the screen was even brighter than EUI stock rom and every thing was working just fine. Even battery backup seems to have improved drastically. In the course of 1hour 30 minutes that I used MIUI Official Russian rom with AMX Kwernel, battery dropped just 5%.
I was at 79% when I started working on the rom with 4G network on and I put the screen on highest brightness level which was very very bright. Sync was on, download was on at full speed, music playing in the backgroud & I was browsing.
If any one like to use MIUI on their LE2X526, try it alongside AMX Kernel. Preferably use Russian Version of MIUI coz it does not have any chinese blotware. Or you can try the kernel with any other version of MIUI. Your choice.
XDA Link to Rishab Rao's AMX Kernel: https://forum.xda-developers.com/le-2/development/andromodx-kernel-t3529576
Link for Russian Official Ported MIUI for LE2(Snapdragon Varient): https://miui.su/firmware_manager/model_view/369/
(MIUI Installation might take some time as the script will show "Waiting for System: resource busy" for some time. But it will complete the flashing none the less.
Then install the Kernel.
Done.
Happy flashing.
Buddy do have the link to install gapps for miui russian version
And Thanks for sharing the info
Do we need to flash gapps. And VoLTE working? One more thing, is it smooth enough to use it as s daily driver!
Njishi said:
Do we need to flash gapps. And VoLTE working? One more thing, is it smooth enough to use it as s daily driver!
Click to expand...
Click to collapse
It has gapps i cant test volte cuz my sim has no support to volte
Sent from my le_s2 using XDA Labs
dungos said:
Buddy do have the link to install gapps for miui russian version
And Thanks for sharing the info
Click to expand...
Click to collapse
Gapps is already installed in the ROM. And you are welcome. Just shared an info I came across, tested and succeeded.
senseijtitus said:
Gapps is already installed in the ROM. And you are welcome. Just shared an info I came across, tested and succeeded.
Click to expand...
Click to collapse
Help i cant open setting suddenly
Sent from my le_s2 using XDA Labs
Yes its working and battery timing improved a lot too. Just to add, need to flash EUI-Andromax2 for the fix.
Buddy.. After clean flashing. It's booting into recovery every time rather than booting into system. What should i do?
senseijtitus said:
Hi Guys,
Its a great news for those who want to install MIUI on their LE2X526. Until now, we have been facing low brightness issue with almost all the MIUI roms we had installed till date except one which was a little buggy when applying darker themes and recent apps.
But now, the latest release of AndroModX Kernel(V2) which had been developed by Rishabh Rao can solve this issue. I had installed MIUI Russian official version and along with it, installed AndroModX V2 kernel just to test it out. I had installed the same rom earlier but had uninstalled it due to low brightness issue which was too much strain on eyes and is totally non visible in daylight.
But with AndromodX Kernel, right after the first boot up, the screen was even brighter than EUI stock rom and every thing was working just fine. Even battery backup seems to have improved drastically. In the course of 1hour 30 minutes that I used MIUI Official Russian rom with AMX Kwernel, battery dropped just 5%.
I was at 79% when I started working on the rom with 4G network on and I put the screen on highest brightness level which was very very bright. Sync was on, download was on at full speed, music playing in the backgroud & I was browsing.
If any one like to use MIUI on their LE2X526, try it alongside AMX Kernel. Preferably use Russian Version of MIUI coz it does not have any chinese blotware. Or you can try the kernel with any other version of MIUI. Your choice.
XDA Link to Rishab Rao's AMX Kernel: https://forum.xda-developers.com/le-2/development/andromodx-kernel-t3529576
Link for Russian Official Ported MIUI for LE2(Snapdragon Varient): https://miui.su/firmware_manager/model_view/369/
(MIUI Installation might take some time as the script will show "Waiting for System: resource busy" for some time. But it will complete the flashing none the less.
Then install the Kernel.
Done.
Happy flashing.
Click to expand...
Click to collapse
Hi, I have flashed the Russian ROM n eui amx2. It works, brightness solved but phone softboot frequently n sometimes network goes off suddenly.
Is there any solution for this?
Njishi said:
Buddy.. After clean flashing. It's booting into recovery every time rather than booting into system. What should i do?
Click to expand...
Click to collapse
Wipe cache, device, data & system. Then flash MIUI first. After that, immediately flash and kernel. Then go to wipe and factory reset. Then reboot to system.
tumonh said:
Hi, I have flashed the Russian ROM n eui amx2. It works, brightness solved but phone softboot frequently n sometimes network goes off suddenly.
Is there any solution for this?
Click to expand...
Click to collapse
I had not faced that issue. But I think, you can flash eui19s modem over it. This may solve the issue.
DarknessKiller said:
Help i cant open setting suddenly
Click to expand...
Click to collapse
Do s factory reset and relboot.
volte not working for me, please confirm if its working?
Should we use eui andro mod x or lineage one for brightness fic
Do you mean that the brightness slider and VoLTE are working?
brighness issue is solved after flashing kernel but volte is not working
senseijtitus said:
Wipe cache, device, data & system. Then flash MIUI first. After that, immediately flash and kernel. Then go to wipe and factory reset. Then reboot to system.
Click to expand...
Click to collapse
No luck... Did everything! Wiping formatting! I am using TWRP, is it causing any problem?
I must thanks,because you fix mu port miui8 Low Brighness, can i use it for my port MIUI8 to my users?
ycjeson said:
I must thanks,because you fix mu port miui8 Low Brighness, can i use it for my port MIUI8 to my users?
Click to expand...
Click to collapse
Its just bcoz of andromodx kernel developed by beloved rishab rao.
You can ask him either.
zeetwo-raj said:
Its just bcoz of andromodx kernel developed by beloved rishab rao.
You can ask him either.
Click to expand...
Click to collapse
can you give me beloved rishab rao's email?

OFFICIAL Mokee MK71.2

Just reporting, new Mokee available on the official site, it's an experimental build for now, i've already tried it.
It use an old 3.18.24 kernel, camera rec. doesn't work (only with Footej camera), no other bugs (in my try).
Download link (official Mokee site):
https://download.mokeedev.com/?device=markw
Bugs(latest Nightly, 3/12/17):
-unable to reproduce videos from gallery and apps (WhatsApp, AndroVid etc..)
-some problems with media (pictures, videos, etc..)
**UPDATES**
(11-09)
-Latest Nightly have a new 3.18.31 kernel with fixed video recording, you can have problems only in lowlight conditions.
Download on official site.
wow! good news!!
AWESOME!!
There is a Nightly too
How about the nightly build?
eliccs said:
How about the nightly build?
Click to expand...
Click to collapse
I've updated the post, latest Nightly fixes the video rec. and have a new 3.18.31 kernel.
N1ck474 said:
I've updated the post, latest Nightly fixes the video rec. and have a new 3.18.31 kernel.
Click to expand...
Click to collapse
yes the video rec. now works, confirmed :good:
edit:
able to record video, but it can't be played, also
green tinted on dark light
mikey000 said:
yes the video rec. now works, confirmed :good:
edit:
able to record video, but it can't be played, also
green tinted on dark light
Click to expand...
Click to collapse
Bug added, unable to reproduce videos from gallery or Apps, only from Stock File Manager (try it)
Bug report, my fingerprint doesnt work, btw this rom awesome
dawn100190 said:
Bug report, my fingerprint doesnt work, btw this rom awesome
Click to expand...
Click to collapse
Fingerprint scanner works fine for me (since first EXPERIMENTAL), i can't add this is Bugs.
For me works (FPC), maybe you have issues on Goodix.
N1ck474 said:
Fingerprint scanner works fine for me (since first EXPERIMENTAL), i can't add this is Bugs.
For me works (FPC), maybe you have issues on Goodix.
Click to expand...
Click to collapse
when use experimental rom FP working fine, but after try multirom then flashing with latest mokee, suddenly dont work my FP, can you give solution, or i try re-flashing
dawn100190 said:
when use experimental rom FP working fine, but after try multirom then flashing with latest mokee, suddenly dont work my FP, can you give solution, or i try re-flashing
Click to expand...
Click to collapse
Try re-flash with full wipe.
N1ck474 said:
Fingerprint scanner works fine for me (since first EXPERIMENTAL), i can't add this is Bugs.
For me works (FPC), maybe you have issues on Goodix.
Click to expand...
Click to collapse
same here, my fingerprint also works
N1ck474 said:
Try re-flash with full wipe.
Click to expand...
Click to collapse
Ok, thanks
Edited:
After re-download rom and clean wipe
My FP working
Great news, will run it tonight.
I had problems with fingerprint too, it stopped working and it disappeared from the security settings.
After a reboot it came back and it is now working fine.
I'm using this rom (09/11 nightly), everything is running very well, no fingerprint problems for me. But battery performance is bad i think. This rom has battery drain i guess, does anybody know about this? And vibration sensitivity is very low, how can i fix it?
Dramaprensi said:
I'm using this rom (09/11 nightly), everything is running very well, no fingerprint problems for me. But battery performance is bad i think. This rom has battery drain i guess, does anybody know about this? And vibration sensitivity is very low, how can i fix it?
Click to expand...
Click to collapse
Wait for updates, Nightly mokee update every day.
So far so good.
Will report battery tomorrow.
Flashed on a completely clean (formatted) device.
Lost 4% overnight.

Categories

Resources