Hello!
My friend got his samsung galaxy trend bricked.
However stock recovery plus Odin download mode is still accessible. I already tried wipe data/factory reset but nothing helped.
I tried the Odin process but my device doesnt get listed in Odin whenever I connect. A message pops up in the windows task panel saying "Unrecognized device". Though samsung drivers are already installed.
Please help me out.
Edit :
Got it! I was using older version of Odin. Updated it to the latest and it worked. Also I was using older version of Samsung drivers so I had to install its latest version too.
d34dp00lx said:
Hello!
My friend got his samsung galaxy trend bricked.
However stock recovery plus Odin download mode is still accessible. I already tried wipe data/factory reset but nothing helped.
I tried the Odin process but my device doesnt get listed in Odin whenever I connect. A message pops up in the windows task panel saying "Unrecognized device". Though samsung drivers are already installed.
Please help me out.
Click to expand...
Click to collapse
Try changing the battery or putting ur battery in another trend phone to check the battery
d34dp00lx said:
Hello!
My friend got his samsung galaxy trend bricked.
However stock recovery plus Odin download mode is still accessible. I already tried wipe data/factory reset but nothing helped.
I tried the Odin process but my device doesnt get listed in Odin whenever I connect. A message pops up in the windows task panel saying "Unrecognized device". Though samsung drivers are already installed.
Please help me out.
Edit :
Got it! I was using older version of Odin. Updated it to the latest and it worked. Also I was using older version of Samsung drivers so I had to install its latest version too.
Click to expand...
Click to collapse
Great, This thread will be Marked complete, and closed
Related
Hi, while trying to install a new bootloader the cable was pulled from the laptop now my Galaxy Tab 2 5110 10.1 is showing the error -
Please select recovery mode in kies & try again.
Sadly I didn't register the device in kies so it wont let me recovery it or even connect. Is there any way to fix this?
Samsung was a lie, it's a false warning. Just use Odin to reflash.
Hi All,
I'm hoping someone can help me with my non-rooted Samsung Galaxy Tab 2 10.1 Tablet (GT-P110). The tablet won't go into download or recovery mode, and it's saying "Firmware Upgrade encountered an Issue. Please select recovery mode in KIES and try again". I've tried using Kies, but it's not recognising the device.
I've downloaded Odin 3.09 and a stock ROM from Samsung Updates. When I go to flash the ROM via ODIN it fails at around the 60-70% mark. I've tried a different stock ROM, but the same thing happens.
Is there anything else I could try?
Many Thanks...
GalaxyTabTwo said:
Hi All,
I'm hoping someone can help me with my non-rooted Samsung Galaxy Tab 2 10.1 Tablet (GT-P110). The tablet won't go into download or recovery mode, and it's saying "Firmware Upgrade encountered an Issue. Please select recovery mode in KIES and try again". I've tried using Kies, but it's not recognising the device.
I've downloaded Odin 3.09 and a stock ROM from Samsung Updates. When I go to flash the ROM via ODIN it fails at around the 60-70% mark. I've tried a different stock ROM, but the same thing happens.
Is there anything else I could try?
Many Thanks...
Click to expand...
Click to collapse
Try a different cable if possible, different pc/laptop and go to samsung website and download drivers for your tablet model. Sometimes Kies doesn't do a good job with drivers.
Try rebooting tablet and connecting it right away to pc/laptop.
Good luck.
Pp.
PanchoPlanet said:
Try a different cable if possible, different pc/laptop and go to samsung website and download drivers for your tablet model. Sometimes Kies doesn't do a good job with drivers.
Try rebooting tablet and connecting it right away to pc/laptop.
Good luck.
Pp.
Click to expand...
Click to collapse
I have tried a different cable, laptop and downloaded the drivers from the Samsung website, but I was still stuck with the same problem. I tried using Odin 3.07 and this got me further than before. It went through the flash process and I then got the blue reset message. The problem is that the tablet doesn't reset and just goes to a black screen. When I try to manually reset the tablet it comes back with the same message "Firmware Upgrade encountered an Issue. Please select recovery mode in KIES and try again"
Has anyone got any other suggestions I could try?
Many Thanks...
I've had the exact same issue before and in my case simply removing the external sd card before flashing with Odin solved the problem.
Sent from my SGH-M919 using Tapatalk 2
I never thought of that because I keep a nandroid copy on my external SD, so I always pull it from my phone or tablet when flashing /reset just to be safe. Doesn't everyone do that?
Pp.
Hi,
Figured id start off by explaining the history on my Samsung Note N8010
A while back i installed Hyperdrive Rom RS8 (i think), no problems, flawless. However it did change my device id to an N8013, not sure why.
Recently i wanted to use SkyGo Tablet app, however root cloak and Voodoo does not cloak SkyGo Tablet app on this specific rom so i figured id revert back to the original 4.1.2 stock.
I used Mobile Odin, grabbed the zip/tar from the Sam-mobile and hit go.
On reboot, it would not load in, stuck on the Samsung Note 10.1 splash. I do have access to download mode and recovery mode, but it's labelled Android System Reocvery <3e>.
It is worth noting that USB debug did not work on Hyperdrive, so currently no matter what computer i connect this tablet to Odin, Kies or anything will not see it.
When trying to "apply update from sd card" i get E:\ mount problems, it pretty much fails every time.
Any suggestions?
kitchenspoon said:
Hi,
Figured id start off by explaining the history on my Samsung Note N8010
A while back i installed Hyperdrive Rom RS8 (i think), no problems, flawless. However it did change my device id to an N8013, not sure why.
Recently i wanted to use SkyGo Tablet app, however root cloak and Voodoo does not cloak SkyGo Tablet app on this specific rom so i figured id revert back to the original 4.1.2 stock.
I used Mobile Odin, grabbed the zip/tar from the Sam-mobile and hit go.
On reboot, it would not load in, stuck on the Samsung Note 10.1 splash. I do have access to download mode and recovery mode, but it's labelled Android System Reocvery <3e>.
It is worth noting that USB debug did not work on Hyperdrive, so currently no matter what computer i connect this tablet to Odin, Kies or anything will not see it.
When trying to "apply update from sd card" i get E:\ mount problems, it pretty much fails every time.
Any suggestions?
Click to expand...
Click to collapse
The original issue is probably one of two things. If you downloaded the rom directly to your device its Likely a bad download. DID YOU CHECK MD5 Before flashing. There are also limitations to Mobile odin.
What i would suggest is to uninstall Kies . Make sure you have no other android devices installed on your computer .Download the older version again from Samsung website. Install on your computer. Download odin again i think you want the one a version back as well NOT Latest.
Reboot into download mode. Run odin. if it still does not see your device check Device manager and see if its showing up with a yellow mark. Look for a post i made last week explaining how to correct usb driver for windows.. Download mode should work with out usb debug on if i remember correctly..
erica_renee said:
The original issue is probably one of two things. If you downloaded the rom directly to your device its Likely a bad download. DID YOU CHECK MD5 Before flashing. There are also limitations to Mobile odin.
What i would suggest is to uninstall Kies . Make sure you have no other android devices installed on your computer .Download the older version again from Samsung website. Install on your computer. Download odin again i think you want the one a version back as well NOT Latest.
Reboot into download mode. Run odin. if it still does not see your device check Device manager and see if its showing up with a yellow mark. Look for a post i made last week explaining how to correct usb driver for windows.. Download mode should work with out usb debug on if i remember correctly..
Click to expand...
Click to collapse
Hi, cheers for the response,
I have tried all of what you have said but unfortunately no PC will see my device, not even an "unrecognized device". I have access to android system reocvery <e3> and Download mode (Odin) but the pc just won't recognized, tried new leads and so forth, nothing.
I'm completely hopeless, and all I can count on are good people from XDA to help me.
I bought a new Samsung Galaxy S6, T-Mobile version [G920F], running Android 5.1.
I used this tutorial:
http://www.droidviews.com/root-samsung-galaxy-s6-and-install-twrp-recovery-all-models/
I enabled USB Debugging, downloaded latest Samsung USB drivers.
First I successfully installed TWRP 2.8.7.1, and meanwhile copied the SuperSU.zip to my device.
I had successfully entered TWRP, went to Install, and selected teh SuperSU file. It said it was done, so I went ahead and restarted my device.
Immediately, I noticed that the device was stuck on the boot logo (Galaxy S6 + Powered by Android screen).
And for some reason, when I connect the device with USB to mc PC, Windows says it's "damaged or undetected", something of that sort.
Luckily, I can still detect it in ODIN.
I might mention that I can still enter TWRP & Download Mode from the Bootloop.
I'll give any more information I can, just tell me if there is any hope for me.
Thank you so much.
My phone is a Samsung Galaxy S7 SM-G930A. I recently rooted my phone and it was causing alot of problems such as slowdown and bugs. So, I tried to put stock firmware on it and I was unsuccessful. Now my phone is stuck in a boot loop. I need to know how to properly install stock firmware into my phone because I have followed guides on XDA'S website and Odin keeps failing. I really need help with this because I don't even have a working cell phone.
DarkSlayer356 said:
My phone is a Samsung Galaxy S7 SM-G930A. I recently rooted my phone and it was causing alot of problems such as slowdown and bugs. So, I tried to put stock firmware on it and I was unsuccessful. Now my phone is stuck in a boot loop. I need to know how to properly install stock firmware into my phone because I have followed guides on XDA'S website and Odin keeps failing. I really need help with this because I don't even have a working cell phone.
Click to expand...
Click to collapse
Download samsung kies 3 and put the phone in download mode and try to recover the phone by flashing the default firmware that came with the phone.
Kies 3 does not support my device (SM-G930A)
RiTCHiE007 said:
Download samsung kies 3 and put the phone in download mode and try to recover the phone by flashing the default firmware that came with the phone.
Click to expand...
Click to collapse
Thank you for the response but when I connected my phone to Kies 3, I got a message that said "we do not support this device". I have also tried Samsung Smart Switch and that did not work either. Is there another method for restoring my phone and getting it out of the bootloop?
DarkSlayer356 said:
Thank you for the response but when I connected my phone to Kies 3, I got a message that said "we do not support this device". I have also tried Samsung Smart Switch and that did not work either. Is there another method for restoring my phone and getting it out of the bootloop?
Click to expand...
Click to collapse
Yes i know you get that msg in kies but you still will be able to flash the orig fw back to the device with kies. Just put the phone in download mode before hooking up the phone to the pc then start kies
And go to the top bar and select the 4th tab where you will see recovery. Then it will ask you for the model number and some other things and after that it will flash the fw for you. I have done this a couple of times now so i can tell you 100% that it will work
RiTCHiE007 said:
Yes i know you get that msg in kies but you still will be able to flash the orig fw back to the device with kies. Just put the phone in download mode before hooking up the phone to the pc then start kies
And go to the top bar and select the 4th tab where you will see recovery. Then it will ask you for the model number and some other things and after that it will flash the fw for you. I have done this a couple of times now so i can tell you 100% that it will work
Click to expand...
Click to collapse
I'm actually trying to do exactly this now, and have tried re-entering the correct model number and serial number into Kies numerous times.
No matter what, Kies continues to state "Please check the model name and enter it" even though all of the info entered is correct.
Any suggestions? I'm doing this with my G930A on Nougat (model "SM-G930A")