Database Info

[Q] tablet erases any new file on reboot??

Hey everyone,
So I got my tablet today and have been working on it for the past 8 hours!! I finally got CWmod on it and running. Had a nightmare of a time getting it to work correctly and after using NVFLASH to nuke the whole tablet and install the stock ROM, then updating i was able to get CWmod to run. Now I'm having a really odd issue.
I can boot into CWmod. I repartitioned the SD card, mounted it. I can see the device in windows but when I add ANYTHING to the internal SD card it is completely gone once I reboot the device. I'm trying to get a ROM on it but it's like the drive is locked or something really weird. It copys onto the tablet just fine. the second I reboot everything is deleted.
I feel like I'm missing something here. I had that issue with it when I ran the stock ROM. I could change something and it would not stick after a reboot. For example registering my device on kindle and then downloading books. as soon as I reboot the machine it's as if i never registered it. I'm really at a loss as to what to do with this. I can't seem to get it to save anything on the internal storage.

Well after fiddling with it for a while longer I'm about to give up. I used NVFLASH to get it to the stock ROM again. updated to 3588 and yet again, I can't get any changes to stick. I can change anything and everything on it while it's powered on. The second I power it off and reboot it nukes everything I did (and takes close to 5-6 minutes to boot). I even mounted it and deleted every single file on the internal storage. They all came back upon reboot. I reformatted the entire SDCARD, I reformatted all the user data, did a cache wipe.. nothing works. I'm wondering if my unit is defective? at this point I would love to just have a tablet that I can actually use. I can't understand how it's even possible to not be able to make any changes on the device unless it's reinstalling the ROM everytime I reboot?

What version of CWM are you using and how did you install it?

I was running CWM 8. I couldn't install it via the internal storage. It would boot into recovery mode and "install" but once the machine rebooted it would not boot into CWM. I tried it several times same deal. I could install it but once it rebooted, nothing :/..
So I had to use the micro SD card to install it. I edited the recovery command file and pointed it to the SDCARD2. It installed finally, and stuck!
I tried using the microSD card to install the other ROMs. But unfortunately it will not mount in CWM.
I'm trying to get CWM back on it after doing yet another wipe with NVFLASH. We'll see if I can get it to work..
So i'm basically sitting here with a brick.. unless I never power it off lol!

Ok well another odd thing is going on with this. I'm up and running with CWM 08 again. I can turn on USB mass storage mount. The tablet shows up in windows and on my linux box. I can make whatever changes I want, adding files, deleting everything on it. Nothing matters cause once I unmount and remount the device it's all back to normal. It seems like nothing is allowed to write to the internal storage even though it thinks it does write to it??

[Q] Stuck on Black screen

I have a Captivate that was rooted and working for over 6 months, and suddenly went into a black screen giving error on E:\.....
Have tried to install the stock firmware using ODIN in Download mode I897UCJF6-final-OCD-REV0 and I897UCKJ3_withBL and both are a success, but as soon as I reboot the phone i get the AT&T logo, see the Samsung logo and then the screen turns black and I can't even see the phone on USB
Also tried loading the Pinnacle_Flasher and I can see the CW recovery menu, but after that point I'm unable to flash an update.zip (Pinnacle_1.2.zip renamed as update.zip on root of ext SD card) from the external SD, and am unable to copy it to the internal SD Card. Connecting the phone to the PC says the USB drive needs to be formated.
Appreciate if anyone can help in recommending any other steps I can take to unbrick the phone
Using a Win 7 32 PC
Thanks

batrad said:
I have a Captivate that was rooted and working for over 6 months, and suddenly went into a black screen giving error on E:\.....
Have tried to install the stock firmware using ODIN in Download mode I897UCJF6-final-OCD-REV0 and I897UCKJ3_withBL and both are a success, but as soon as I reboot the phone i get the AT&T logo, see the Samsung logo and then the screen turns black and I can't even see the phone on USB
Also tried loading the Pinnacle_Flasher and I can see the CW recovery menu, but after that point I'm unable to flash an update.zip (Pinnacle_1.2.zip renamed as update.zip on root of ext SD card) from the external SD, and am unable to copy it to the internal SD Card. Connecting the phone to the PC says the USB drive needs to be formated.
Appreciate if anyone can help in recommending any other steps I can take to unbrick the phone
Using a Win 7 32 PC
Thanks
Click to expand...
Click to collapse
It could be something is corrupt on your internal SD card. Have you tried enetering clockwork mod and mounting USB storage and then hook it up to your computer and reformatting it
Currently Fusionized

Wdustin1 said:
It could be something is corrupt on your internal SD card. Have you tried enetering clockwork mod and mounting USB storage and then hook it up to your computer and reformatting it
Currently Fusionized
Click to expand...
Click to collapse
When I run clockwork mod and try to format the media it fails it works
when i connect to the PC and try to access the folder, it fails, saying i need to format the media, and when i try to format from the PC, it fails...
thanks

batrad said:
I have a Captivate that was rooted and working for over 6 months, and suddenly went into a black screen giving error on E:\.....
Have tried to install the stock firmware using ODIN in Download mode I897UCJF6-final-OCD-REV0 and I897UCKJ3_withBL and both are a success, but as soon as I reboot the phone i get the AT&T logo, see the Samsung logo and then the screen turns black and I can't even see the phone on USB
Also tried loading the Pinnacle_Flasher and I can see the CW recovery menu, but after that point I'm unable to flash an update.zip (Pinnacle_1.2.zip renamed as update.zip on root of ext SD card) from the external SD, and am unable to copy it to the internal SD Card. Connecting the phone to the PC says the USB drive needs to be formated.
Appreciate if anyone can help in recommending any other steps I can take to unbrick the phone
Using a Win 7 32 PC
Thanks
Click to expand...
Click to collapse
What was the last thing you did? Install an app, browsing internet.........?

chappatti said:
What was the last thing you did? Install an app, browsing internet.........?
Click to expand...
Click to collapse
updated apps from the marketplace..

Did you actually name it update.zip, or just update?

i had the same issue. trying to look for the posts i made about it. i remember something along the lines of flashing to an old boot loader and an old kernel with cwm then doing all my wipes then doing a master clear via odin then via cwm again then tried flashing to stock. im probably neglecting one of my steps though.
oh and make sure you let it charge via wall plug for at least a half hour before you try anything.

[Q] oh no...what have I done..!

I have spent the last 3 days trying to upgrade my Tf101 with an up to the minute os but have bitten off more than I can chew. I spent the whole of the first day just trying to root it to no avail. Ok, no problem, sleep on it. Next morning tried a different method and " hey presto " I have done it.
So, next job is download " Titanium " and make back up to micro sd card, all done. I then followed " Frederuco's Guide and installed EasyFlasher with TWRP 2.3.6.0 and with a bit of fiddling and button pushing managed to load it and followed his guide right through to the second option " Custom Rom with custom recovery ". I had loaded KatKiss 4.4.2_019.zip along with the add on pack and the latest Gapps package. So far so good. Did full the full wipe/ factory reset, cache, davlick cache, system etc, more success, nearly there. Back to TWRP home screen an click INSTALL to start the flash............where is the micro sd..........? Check further.........micro sd not mounted......oh sugar.......
So now I'm screwed, I think I have bitten off more than I can chew. My little TF101 was working fine before I messed with it albeit a bit slow but it was working. Micro sd card slot was working fine up until now. I am not that PC literate if anyone can help me it needs to be in simple terms please, but I can follow instructions. My pc is running on win 7 32 bit. The Asus was totally stock on the last firmware that ended with .27
I do have a keyboard dock with it but has not been coupled to it through out this process.
Have I trashed my little Asus..?
I appreciate any thoughts even if it bad news. This is the first time I have ever attempted something like this, a total newbie.
Thanks,
Steve

Go to the "Mount" option in TWRP and mount the MicroSD ?
If I remember correctly, with the newer TWRP builds, you have to change between Internal and External SD using a dropdown on the Install page

Also, you need to have the micro SD installed on boot I believe. It is not auto mounted in TWRP.

*Detection* said:
Go to the "Mount" option in TWRP and mount the MicroSD ?
If I remember correctly, with the newer TWRP builds, you have to change between Internal and External SD using a dropdown on the Install page
Click to expand...
Click to collapse
Tried that, it says something like " unable to mount in the logs " Did it quite a few times.
Thanks for the reply

frederuco said:
Also, you need to have the micro SD installed on boot I believe. It is not auto mounted in TWRP.
Click to expand...
Click to collapse
I thought that and that could have been my first mistake as I had not got the files on it when the Guide told me me to install the rom to flash.
I then put the files on a inserted the card but obviously it still did not mount. I did try the " mounting option " in the program but as you can see I did not manage it. I will try again but I am not holding my breath...!
Thanks for your reply.
Steve

Tyr flashing a different version with Easyflasher
http://forum.xda-developers.com/showthread.php?t=1688012
Or
Download a different flashable TWRP zip - 2.3.2.3 is the latest official build
Connect PC > TF and boot into TWRP
Use adb to push version 2.3.2.3 to the TF internal sdcard
adb push twrp.zip /sdcard/
Then flash from internal sd
You could do the same with the ROM

ok, lost me there....what is ADB ?

Just use Easyflasher, it's easy and quick
ADB
http://www.geek.com/mobile/what-is-adb-and-how-do-i-use-it-1461697/

I'm still trying now, have Easyflsher open but am struggling with it.......I've done so much reading my brain is pickled...!

I have been trying to use ABD sideload but it is not loading........

I am still trying to sort my problem out.
I have downloaded fresh copy of EasyFlasher- 0.8.3b-STABLE_2.6.3.0 which I assume is the latest version?
I am able to get the TF101 into APX mode and load TWRP.
It would appear that the TF is not connecting to my win7 PC because of a driver issue. When I go to device manager the Android ATP device has a yellow triangle through it which I asume is the driver issue. It keeps trying to load a new deiver but ends up as " Failed "
The drivers that I am pointing it at are " Universal Naked Driver 0.72 which I thought where the ones required or perhaps I am doing something wrong...?
I assume if I can get this connected I can move forward.
Can anyone help me with this issue please. I tried till 02.30 this morning, I never figured that it was going to be this hard..!
Thanks in advance
Steve

trwp 6.3.2.0
i am the first homebrew said:
I am still trying to sort my problem out.
I have downloaded fresh copy of EasyFlasher- 0.8.3b-STABLE_2.6.3.0 which I assume is the latest version?
I am able to get the TF101 into APX mode and load TWRP.
It would appear that the TF is not connecting to my win7 PC because of a driver issue. When I go to device manager the Android ATP device has a yellow triangle through it which I asume is the driver issue. It keeps trying to load a new deiver but ends up as " Failed "
The drivers that I am pointing it at are " Universal Naked Driver 0.72 which I thought where the ones required or perhaps I am doing something wrong...?
I assume if I can get this connected I can move forward.
Can anyone help me with this issue please. I tried till 02.30 this morning, I never figured that it was going to be this hard..!
Thanks in advance
Steve
Click to expand...
Click to collapse
Hi, don't panic, you have already install TWRPP. At first be sure your microsd card is always on fat32 and get rom and googapps
If ok put your pad off and insert your sd in. Reboot on twrp. To see your sd card hit install, on the high of the screen you can see "choose a zip to install", above hit on "storage internal storage", a new screen will open, select micro sd, your rom and should be here. If you want to remake all wipe before flasing hit the back arrow in the hight right corner. Hit Wipe on the menu, select partitions to wipe, hit all except micro sd and external (of course). Install rom and gapps, wipe cache and dalvik cache, reboot. I try it this day on twrp 2.6.3.10, i don't remenber for 2.6.3.0, but the way is the same. Good luck

jh1969 said:
Hi, don't panic, you have already install TWRPP. At first be sure your microsd card is always on fat32 and get rom and googapps
If ok put your pad off and insert your sd in. Reboot on twrp. To see your sd card hit install, on the high of the screen you can see "choose a zip to install", above hit on "storage internal storage", a new screen will open, select micro sd, your rom and should be here. If you want to remake all wipe before flasing hit the back arrow in the hight right corner. Hit Wipe on the menu, select partitions to wipe, hit all except micro sd and external (of course). Install rom and gapps, wipe cache and dalvik cache, reboot. I try it this day on twrp 2.6.3.10, i don't remenber for 2.6.3.0, but the way is the same. Good luck
Click to expand...
Click to collapse
Thanks for the reply.
I had 3 hrs on it yesterday before your reply and got nowhere so decided to give it a break last night..!
I appreciate your help with this and will attempt to follow your instructions tonight after work. Are you saying that I should disregard the driver issue as you think I am connected to TWRP ok?
Thanks again

i am the first homebrew said:
Thanks for the reply.
I had 3 hrs on it yesterday before your reply and got nowhere so decided to give it a break last night..!
I appreciate your help with this and will attempt to follow your instructions tonight after work. Are you saying that I should disregard the driver issue as you think I am connected to TWRP ok?
Thanks again
Click to expand...
Click to collapse
Yes, that the way i try first, if you can boot on TWRP there'snt any reason to reflash it !

To jh1969
I followed your instuctions......perfect, I don't think I would have figured it without your help. My micro sd card was formatted in NTFS...! Did format to fat32 and things started to work. Started form the beginning again and now I have it working again....!
I did a back up using Titanium (Apps+data) to the micro sd before I screwed it all up, just got to figure out how to restore that then things will be a lot better. Any idea how I get Gmail back ?
Thanks again for your help.

Figured out my Gmail problem, found the app on the play store, not sure how I missed it the first time.
Could not figure out Titanium, did try loads of times to restore apps & data but no luck so another late night downloading all the apps one by one and getting them all going.
At least I now have my pad working again but still have some issues to sort out.
I cannot get the camera working, when I try to open it I get " Unfortunately, Gallery has stopped"........I get the response also when I try to open " Gallery "
I have not yet figured out a quick way to look at the Micro SD....on the stock TF101 rom there was an icon you could open up in the bottom left corner but of course that has gone now. Any ideas?
Overall I am very please the way it is performing now, it is much quicker than it was prior to this update so thanks to all for there time for all who have developed these software's/roms etc to enable people like me to enjoy my TF101 and extend its life further. I would like to increase it speed a bit more but I think I had better get any issues sorted before I attempt anything else. I have not put it in its dock yet so will try that later today.

[Q] tried every everything cannot upgrade to bigpart

I have two identical xooms. The model number lists as "Xoom". Android version is 4 .1.2 , build JZ054K, kernal version 2.6.39.4-g4e32b94 . I've been trying for days to update at least one of them. I'm using a Linux Mint 17 desktop. No Windows available.
I've tried everything I found on these forums, and nothing has worked. I have 32gb external sd cards in both of them. My first trak was to do it from the SD card but I found that recovery cannot see my SD card. I also tried putting " BigPart" in a directory called downloads, but that didn't help. I also tried loading it onto the internal card. Can't see it either way.
I downloaded the Linux android files and plugged in the USB cable. I could talk to the Xoom, and tell it to reboot the bootlooder into fastboot or recovery, and the Xoom would reboot but lock up at the "loading fastboot" screen. I tried sideloading the BigPart file, but the install would fail on validation. If I try to enter fastboot by rebooting it locks on the loading screen. If I load recovery on boot it appears to come up but It can't see the SD cards or accept the files from the computer (From adb).
One of these Xoom's I gedfied and the other was a google device when I bought it. Both got all of their last bunch of updates thru Google, until Google dropped them. Could the google updates have left something needed out??
As I understand the process getting Big part on the device is the first step. I have all needed files for the upgrade,on my SD cards and on my Linux machine. I just can't use them. Anyone have any ideas? Does anyone know where and what the OS is looking for during that attempted USB update??

Ok turning of Developer options
GreyBeard51 said:
I have two identical xooms. The model number lists as "Xoom". Android version is 4 .1.2 , build JZ054K, kernal version 2.6.39.4-g4e32b94 . I've been trying for days to update at least one of them. I'm using a Linux Mint 17 desktop. No Windows available.
I've tried everything I found on these forums, and nothing has worked. I have 32gb external sd cards in both of them. My first trak was to do it from the SD card but I found that recovery cannot see my SD card. I also tried putting " BigPart" in a directory called downloads, but that didn't help. I also tried loading it onto the internal card. Can't see it either way.
I downloaded the Linux android files and plugged in the USB cable. I could talk to the Xoom, and tell it to reboot the bootlooder into fastboot or recovery, and the Xoom would reboot but lock up at the "loading fastboot" screen. I tried sideloading the BigPart file, but the install would fail on validation. If I try to enter fastboot by rebooting it locks on the loading screen. If I load recovery on boot it appears to come up but It can't see the SD cards or accept the files from the computer (From adb).
One of these Xoom's I gedfied and the other was a google device when I bought it. Both got all of their last bunch of updates thru Google, until Google dropped them. Could the google updates have left something needed out??
As I understand the process getting Big part on the device is the first step. I have all needed files for the upgrade,on my SD cards and on my Linux machine. I just can't use them. Anyone have any ideas? Does anyone know where and what the OS is looking for during that attempted USB update??
Click to expand...
Click to collapse
Ok after 70 views and no responses, I'm giving up for now. Turn off deleloper options, and letting Google have their way with my Xoom android 4.1.2 . "I think" part of the problem is my Xooms will NOT boot into Fastboot. For what ever reason I do not know. The bootloader is still locked because I can't get to it to unlock it (using my Linux box) I know they can be unlocked because I did it a few years ago with my XP box (long gone). Is JellyBean the end for my Xooms?

[Q] My phone suddenly says "Damaged USB storage"

So, here's the problem - I was just using my phone normally, when it froze - no big deal, recently it has been getting slower and I was just planning on factory resetting it after I back up everything. But, when it booted and went on the start screen, it says "Scanning USB storage for problems" or something like that and it says then "Damaged USB Storage -You may have to reformat it" and unmounts my SD card, so, I have no storage altogether. When I click on the notification it asks if I want to format USB storage. I just want to know if there's a way of retrieving some files, because in my phone FIle Manager there's nothing, and when I connect it to the PC (Windows XP), it doesn't dettect any stotage, if I do it through "USB Utilities" on my phone it shows two Removable Disks on my computer, which are empty, when I click on them it just says "insert disk into drive", and if I click "Turn on USB Storage" on my phone it just keeps on trying to connect, but can't.
I tried restarting it, taking the battery out, booting without an SD card, booting into safe mode, using adb to pull some files, searched the internet for a few hours but to no avail, found this "Tenoshare Android Data Recovery" but it needs root, which I'm not, so I tried rooting it with SuperOneClick - doesn't work, tried installing super user from the recovery menu from SD card, but it can't install it - I'm wondering if it's wortht it. So, now I don't know what to do - do I root my phone using the methods here (with odin and etc) and use that utility, do I just factory reset it (maybe try recovering files after I've reset it?), or is there any other available option to somehow recover the files? I'm on Android 4.0.4 unrooted with Baseband version I9103XXLQ3 - I had installed it a few years ago (my phone came with 2.3.6 and I just followed the instructions here on updating my firmware).
I'll be very grateful with any help, I just had a few more important files and the last time I backed up was in December, so any help is appreciated