This is latest GINGERBREAD.XILG1 firmware (August 2012) for GT-s5570i
Firmware downloaded from sammobile and split for ODIN using odinatrix.
This also works to unbrick ur 5570i
Steps:-
1)Download GT-s5570i.zip from http://www.mediafire.com/?qmb5m4tzznnbjpm
2)Open Odin3_v1.84 from folder ODIN.
3)For PDA select PDA_S5570IXILG1_S5570iITVLG2_S5570IXXLF3_HOME.tar
For PHONE select MODEM_S5570IXILG1_S5570iITVLG2_S5570IXXLF3_HOME.tar
For CSC select CSC_S5570IXILG1_S5570iITVLG2_S5570IXXLF3_HOME.tar
4)PIT/BOOT files are not required---leave blank !!!
5)Put device in download mode (Hold Vol Down + Home + Power) and connect to the PC via the USB cable.
6)Press the START button
7)Wait up to 5 minutes, after which will show PASS (do not touch anything until it comes out the word PASS!)
8)The phone will reboot itself
9)After the output will be written PASS disconnects the cell from the PC
Default language is Italian.You can always change the language.
If you want to ROOT i have included zip file to be flashed in ROOT folder
Wrong forum dude
"Addicted to XDA more then facebook.....lol"
this is not Galaxy Mini form ??
Can anyone link me to the forum where this does belong? Can't find it..
don't be so harsh guys...this thread might moved from mini section since mini plus is a lot similar with ours.
techno-update said:
Can anyone link me to the forum where this does belong? Can't find it..
Click to expand...
Click to collapse
i m not sure but i think its like the Y & Y Duos have same so mini also have the same
http://forum.xda-developers.com/forumdisplay.php?f=1314
aaj aap ko mein qmobile noir a2 ke root karna ka tarqa batao ga.is mein mere kafi mehnat lage ha so plz
first download this archive http://d-h.st/O9z
In order to root you QMobile Noir A2 , follow these steps.
1) Getting things read
a) Copy "CWM-SuperSU-v1.04.zip" to your noir a2 sdcard.
b) Install drivers from "MT65x3 USB VCOM drivers" folder.
2) now we will Install CWM recovery
a) Turn off your mobile (remove battery)
b) Open SP Flash tool, click "Scatter-loading" and select file "MT6573_Android_scatter.txt".
c) Make sure ONLY "RECOVERY" is checked in partition and "recovery.img" file is selected.now disconnect ur phone if it was connected to usb port.
d) Press "Download" button, and quickly reconnect your phone using a usb cable. It will start flashing the recovery.
Once it is done, you will see a notification and a Green Circle.
3) Gain root access
a) Boot into recovery by holding "volume +" and "volume -" and pressing the power key. and press volume up u will se cwm menu.
b) Select "recovery mode" from the options.
Here, it is recommended that you backup your entire system to sdcard. So that you have something to come back to,
incase you mess up.
c) In recovery menu, select "install zip from sdcard" -> "choose zip from sdcard" and select "CWM-SuperSU-
v1.04.zip" file from sdcard, go for YES option. Wait for the flash to complete.
d) Now select "reboot system now" option. Wait for the phone to reboot to normal mode.
YOU SHOULD NOW HAVE A ROOTED PHONE with SuperSU app installed, if you followed the steps correctly.
To backup, go to recovery select "backup and restore" -> "backup".
To restore, go to recovery select "backup and restore" -> "restore".
agar koe problem ho to zaror poche.ye sare procedure windows 7 32 bit par test hoa tha.is mein mere kafi mehnat
lage ha so plz thnx button ko zaror click shukryia.
after rooting ur noir a2 use titanuim backup to delete those useless system apps like tomcat and make space for
important things..
MORE DEVELOPMENT FOR NOIR A2 COMING SOON
Not working!
Bro I get this error after i click Download on Sp tools and attach my cell phone with a USB cable without the battery. I have followed each and every step clearly, I am using Windows 7 32Bit.
Please Help!
bilal bhai pehele apna phone factory settings par restore karo and usb debugging enable karo and phir drivers reinstall karo phir try karo..AND SP FLASH TOOL MEIN ONLY RECOVERY KE BOX KO TICK KARO US KE AGA CLICK KARO GE TO FILE BROWSER OPEN HO JAE GA WAHA SE MERE recovery.img select karo and phir flash karo,AND SP FLASH TOOL MEIN DOWNLOAD KA BUTTON PRESS KARNE SE PEHLE PHONE KO DISCONNECT KARDO USB SE PHIR DOWNLOAD PREES KARO JAB TIMER AYA GA THEN USB CABLE CONNECT KARO
mega_man said:
bilal bhai pehele apna phone factory settings par restore karo and usb debugging enable karo and phir drivers reinstall karo phir try karo..AND SP FLASH TOOL MEIN ONLY RECOVERY KE BOX KO TICK KARO US KE AGA CLICK KARO GE TO FILE BROWSER OPEN HO JAE GA WAHA SE MERE recovery.img select karo and phir flash karo,AND SP FLASH TOOL MEIN DOWNLOAD KA BUTTON PRESS KARNE SE PEHLE PHONE KO DISCONNECT KARDO USB SE PHIR DOWNLOAD PREES KARO JAB TIMER AYA GA THEN USB CABLE CONNECT KARO
Click to expand...
Click to collapse
Please use English on xda forum, not urdu or any other language....
I hope you understand
iamareebjamal said:
Please use English on xda forum, not urdu or any other language....
I hope you understand
Click to expand...
Click to collapse
If urdu is helping out others so this shouldn't matter what language you are using, there are tons of thread where French, German, Russian languages are being using, so he is just helping out some people leave him to help other on his way:angel:
_hito_ said:
If urdu is helping out others so this shouldn't matter what language you are using, there are tons of thread where French, German, Russian languages are being using, so he is just helping out some people leave him to help other on his way:angel:
Click to expand...
Click to collapse
XDA is not a region based community
If you tell something in English, it may help everybody and not only people who know hindi or urdu
Here, we tend to help each and every body.
You would know that it is obligatory to speak English if you have read the forum rules
And about other threads using languages other than English, you should tell them to use English instead of telling that everyone else should also speak in their regional languages.
If someone is having problem in understanding of English, then you may translate it if you want and know the language.
But if a person comes here and finds a problem and the solution is in hinglish, then he would not be able to know it
And also, hinglish can't be translated if you know, so please write in English
I hope you understand
Error while using this method / achive
I am getting error
EBOOT ERROR : (16008)
[Android Partition size changed!
[HINT] Partial images download error
mega_man said:
aaj aap ko mein qmobile noir a2 ke root karna ka tarqa batao ga.is mein mere kafi mehnat lage ha so plz
PLZ HELP ME...HOW I CAN FIX IT ...
THANKS
first download this archive http://d-h.st/O9z
In order to root you QMobile Noir A2 , follow these steps.
1) Getting things read
a) Copy "CWM-SuperSU-v1.04.zip" to your noir a2 sdcard.
b) Install drivers from "MT65x3 USB VCOM drivers" folder.
2) now we will Install CWM recovery
a) Turn off your mobile (remove battery)
b) Open SP Flash tool, click "Scatter-loading" and select file "MT6573_Android_scatter.txt".
c) Make sure ONLY "RECOVERY" is checked in partition and "recovery.img" file is selected.now disconnect ur phone if it was connected to usb port.
d) Press "Download" button, and quickly reconnect your phone using a usb cable. It will start flashing the recovery.
Once it is done, you will see a notification and a Green Circle.
3) Gain root access
a) Boot into recovery by holding "volume +" and "volume -" and pressing the power key. and press volume up u will se cwm menu.
b) Select "recovery mode" from the options.
Here, it is recommended that you backup your entire system to sdcard. So that you have something to come back to,
incase you mess up.
c) In recovery menu, select "install zip from sdcard" -> "choose zip from sdcard" and select "CWM-SuperSU-
v1.04.zip" file from sdcard, go for YES option. Wait for the flash to complete.
d) Now select "reboot system now" option. Wait for the phone to reboot to normal mode.
YOU SHOULD NOW HAVE A ROOTED PHONE with SuperSU app installed, if you followed the steps correctly.
To backup, go to recovery select "backup and restore" -> "backup".
To restore, go to recovery select "backup and restore" -> "restore".
agar koe problem ho to zaror poche.ye sare procedure windows 7 32 bit par test hoa tha.is mein mere kafi mehnat
lage ha so plz thnx button ko zaror click shukryia.
after rooting ur noir a2 use titanuim backup to delete those useless system apps like tomcat and make space for
important things..
MORE DEVELOPMENT FOR NOIR A2 COMING SOON
Click to expand...
Click to collapse
your qmobile noir a2 is giving that errror because it is v3 to check take the back cover of ur phone and if is there writtend V2 OR V3 if its V3 then i cannot help because this method is for V2 noir a2
iamareebjamal said:
XDA is not a region based community
If you tell something in English, it may help everybody and not only people who know hindi or urdu
Here, we tend to help each and every body.
You would know that it is obligatory to speak English if you have read the forum rules
And about other threads using languages other than English, you should tell them to use English instead of telling that everyone else should also speak in their regional languages.
If someone is having problem in understanding of English, then you may translate it if you want and know the language.
But if a person comes here and finds a problem and the solution is in hinglish, then he would not be able to know it
And also, hinglish can't be translated if you know, so please write in English
I hope you understand
Click to expand...
Click to collapse
racism everywhere
Does the said method also work for QMobile Bolt A2 Lite?
Hope this is not copy paste from other people because i found it by my self
- connect phone and pc use cable data and dont forget thick usb debuging
-open www.adbdriver.com
-click on universal android driver 9mb and download
-wait this software scan your device and then click install
-now adb driver is connect
-finish
Give me thanks if i help you
Sent from my Andromax U using xda premium
help rooting andromax v3s
Tolong dong gimana cara root buat andromax v3s
DOWNLOAD ANY OF THE BELOW APP
Kingo Root : http://www.kingoapp.com/
Root Genius : http://rootgenius.com/
Enable USB Debugging on your device.
To enable USB Debugging
Go to Setting : About Phone : And Click Several Times on Build Number : Go back and Developers Option is Unlocked
Step 1: Find the desktop icon of Android ROOT and double-click to launch it.
Step 2: Connect your GALAXY S3 to your computer via USB cable. ...
Step 3: Click ROOT to start the process when you are ready. ...
Step 4: ROOT Succeeded! Click Finish to reboot your device.
How to Flash CWM ?
You may wanna see this tutorial : https://www.youtube.com/watch?v=vhSSmdqAXRM
Download Latest CWM form
https://www.clockworkmod.com/rommanager
[ Press Ctrl + F : Input 'I9300' and you'll get there ]
Download the File
Now , You need Odin
Download Odin from http://odindownload.com/
Just so you know , I used Odin 3.04
Go to Download Mode [ Press Power + Home + Volume Down all 3 at once ]
Make sure your device is found by Odin
Click on PDA and load the CWM file which you have just downloaded .
Click Start
Let your device REBOOT
You have now SUCCESSFULLY FLASHED CWM
Twitter : https://twitter.com/l_senon_l
Google Plus : https://plus.google.com/+ShishirKhanal/
I hope this helped Hit thanks if it did
USEFUL LINKS :
SAMSUNG GALAXY S III I9300 FORUM : http://forum.xda-developers.com/galaxy-s3#subForums
VIDEO TUTORIAL : http://forum.xda-developers.com/galaxy-s3#root
ROM LIST : http://forum.xda-developers.com/galaxy-s3#romList
CURRENTLY I'M USING CyanogenMod 12.1 for i9300 [http://forum.xda-developers.com/galaxy-s3/development/5-1-x-cyanogenmod-12-1-t3066864]
Hello,
The Assist forum is not the correct section to post this guide, please re-post in the correct device section.
Thread closed.
BD619
Hi.. I'm new into this awesome forum. I've been searching everywhere on how to properly root my phone but all of those got failed. I've already tried Kingo Root, OneClickRoot, etc..
I hope that someone could help me into this. Any suggestions are greatly appreciated..
There is a shure shot method.
Requirments are as
1 pc
2 odin3 for pc
3 recovery for your device model
4 at least 50% battery
5 update.zip for rooting your device
Instructioms
1 -- open odin and place the recovery file in that folder
2-- power your devicd in download mode by preaainh power + vol.down+ home
3-- open odin and connect device to pv
4-- press connect on device and odin should recognise your device.
5-- brouse your recovery file and plave the path in pda and tic it.
6-- press start and when its done odin will say pass.
7-- remove your phone and reboot it.
8-- flash the update folder using the recovery inatalled and your device is rooted.
droid_god said:
There is a shure shot method.
Requirments are as
1 pc
2 odin3 for pc
3 recovery for your device model
4 at least 50% battery
5 update.zip for rooting your device
Instructioms
1 -- open odin and place the recovery file in that folder
2-- power your devicd in download mode by preaainh power + vol.down+ home
3-- open odin and connect device to pv
4-- press connect on device and odin should recognise your device.
5-- brouse your recovery file and plave the path in pda and tic it.
6-- press start and when its done odin will say pass.
7-- remove your phone and reboot it.
8-- flash the update folder using the recovery inatalled and your device is rooted.
Click to expand...
Click to collapse
whres the update.zip?
Well you can find tha stuff on google
---------- Post added at 09:56 PM ---------- Previous post was at 09:56 PM ----------
This was a general method for samsung devicea to root
---------- Post added at 09:56 PM ---------- Previous post was at 09:56 PM ----------
But yoi can try apps like kingoroot
---------- Post added at 09:57 PM ---------- Previous post was at 09:56 PM ----------
Pc and android both versions are equally good
Translation, mostly by Google:
Quote:
Originally Posted by dodynoe
How To Root Samsung Galaxy J1 (SM-J100H)
www dodynoe.com/2015/04/how-to-root-samsung-galaxy-j100h
Complete Step By Step Tutorial to Root Samsung Galaxy J1:
This tutorial is only managed using a PC
Step 1:
Download MD5 file through www mediafire.com/downl.../r99xeoywhdryenc/boot.tar.md5
Step 2:
Download and install the USB Driver. www mediafire.com/.../a4hd8y0c1iakysk/Samsung-Usb-Driv...
Step 3:
Download ODIN v3.10 and directly extract it. www mediafire.com/.../v26m0vfo1rb9xi6/Odin3_v3.10.6.zip
Step 4:
Phone: enter download mode first >>. After being turned off, HOLD all three buttons (Power button + Volume Down button + Home Button). After turned on, immediately release (Power button) but still HOLD Volume Down Button + Home button. After that select Continue using Volume button UP. now your phone is already in the download mode.
Step 5:
Plug the phone to a PC via USB cable
Step 6:
Open the Odin v3.10 application that is already downloaded. Click the PA button and select the MD5 file that is already downloaded. Then Click (START) button. Wait until completed and the phone will automatically reboot
Step 7:
Download application iROOt and install in PC. See www mgyun.com/en/getvroot
Step 8:
Open the iRoot application that is already installed earlier and run the root process
princess_lihof said:
Translation, mostly by Google:
Quote:
Originally Posted by dodynoe
How To Root Samsung Galaxy J1 (SM-J100H)
www dodynoe.com/2015/04/how-to-root-samsung-galaxy-j100h
Complete Step By Step Tutorial to Root Samsung Galaxy J1:
This tutorial is only managed using a PC
Step 1:
Download MD5 file through www mediafire.com/downl.../r99xeoywhdryenc/boot.tar.md5
Step 2:
Download and install the USB Driver. www mediafire.com/.../a4hd8y0c1iakysk/Samsung-Usb-Driv...
Step 3:
Download ODIN v3.10 and directly extract it. www mediafire.com/.../v26m0vfo1rb9xi6/Odin3_v3.10.6.zip
Step 4:
Phone: enter download mode first >>. After being turned off, HOLD all three buttons (Power button + Volume Down button + Home Button). After turned on, immediately release (Power button) but still HOLD Volume Down Button + Home button. After that select Continue using Volume button UP. now your phone is already in the download mode.
Step 5:
Plug the phone to a PC via USB cable
Step 6:
Open the Odin v3.10 application that is already downloaded. Click the PA button and select the MD5 file that is already downloaded. Then Click (START) button. Wait until completed and the phone will automatically reboot
Step 7:
Download application iROOt and install in PC. See www mgyun.com/en/getvroot
Step 8:
Open the iRoot application that is already installed earlier and run the root process
Click to expand...
Click to collapse
Can you give the whole url because its incomplete
Guys just use kingroot then change it to SuperSU if you want