Database Info

CWM-based Recovery for LAVA Z7H Tablet

Lava E-tab Z7H has a very worst recovery system. So I am giving a new CWM based recovery mode.
Advantages of recovery mode-
1. You can backup your total tablet system to your internal/external SD card.
2. If you face software related any problem again you can enter into the recovery mode & restore the tablet back to the same position earlier you are at the time of backup.
Steps-
1. Download this zip file. CWM_Recovery ( ) or Billionupload ( ) or Mediafire ( )
2. Extract the zip file.
3. Connect your lava tablet & make sure it is on.
4. If you have not installed the driver for this driver in your pc then
a) Go to device manager ("Win Key + r" then type "devmgmt.msc").
b) See an yellow unknown device which driver is not installed. Click on that & click update driver.
c) Then "Browse my computer for driver" & browse to your extracted zip file folder.
5. After updation of driver finished you have to click "1.##Recovery.bat" from the extracted folder. Make sure your tab is connected to pc & switched on.
6. Click 'y' in the command window & press any key to continue when prompted by command window.
7. Now your tablet will reboot into CWM-based recovery mode. You can see a HAT.
8. Bingo!! You are done in installing your new CWM recovery. Read next very Important.
How to backup you full System-
1. In the recovery menu you can see many option like "reboot system now"...to "advanced", with a HAT .
2. Use your volume up & down button for navigate & power button to Enter.
3. Now go to "backup and restore".
4. Now click on "backup to internal sdcard" (Recommended) or if you have an external sd card just click "backup".
5. Now sit back for 5-10 min. & let it do the whole system backup. Don't touch your tab.
6. After it says finished backup shut down your tab by long press power button.
8. Bingo!! You have backed up your Total tablet. Now Go on no need of formatting the tablet & re-installing of all your fav. apps again & again.
How to restore to your previous backup-
1. This process is little bit harassing.
2. Switch on your tab & listen to a small sound (tap) 1 sec. after you switch on at the time of small android logo.
3. Press the volume up key suddenly or it will enter into the home as usual.
4. If you miss it then you have to try again the above steps again.
5.After entering into the recovery mode go to the "backup and restore" and then "recover from internal memory".
6. Bingo!! Now you are done with your restoration. Switch off & then switch on your tab.
PRESS THANKS IF I HELP YOU IN ANY MEANS.

can i use this procedure for lava iris N400?

drganbds said:
can i use this procedure for lava iris N400?
Click to expand...
Click to collapse
I think no. Your device may die.

Please help me to flash cwm recovery on lava iris N400...
The stock recovery is in chinese language how do I change it to english?
Sent from my N400 using xda premium

drganbds said:
Please help me to flash cwm recovery on lava iris N400...
The stock recovery is in chinese language how do I change it to english?
Sent from my N400 using xda premium
Click to expand...
Click to collapse
Sorry I am not a developed. You can start a thread in Xda seeking help from xda developer team.
What ever I know I have shared.

helloansuman said:
Sorry I am not a developed. You can start a thread in Xda seeking help from xda developer team.
What ever I know I have shared.
Click to expand...
Click to collapse
Thanks for reply
Sent from my N400 using xda premium

[GUIDE]Root Qmobile Noir A2 Classic

Today I will tell you how to root one of the quite hard to root phones Qmobile Noir A2 Classic
WARNING:
- I am not responsible for bricked phones
- This tutorial will remove all data from your phone! Be sure to backup your phone book,messages,etc
- This Tutorial is for Qmobile Noir A2 Classic ONLY
Things To Download :-
Adb Drivers http://ge.tt/2yL21VT
Mtk Root and Tools http://dfiles.ru/files/fmnok7ke7
Vcom Drivers
Windows 8 http://www.mediafire.com/?7yee2of64nhl947
WIndows 7/xp/vista http://www.mediafire.com/?cypm22rgs2k83ji
SP Flash Tool http://www.mediafire.com/?agsj3n4neniq054
Scatter File https://www.dropbox.com/s/je0alc5db8t66ld/MT6575_Android_scatter.txt
Super Su ttp://db.tt/owvX0f7t
ROM http://db.tt/n7RhDp0l
Preloader and dsp_bl https://www.dropbox.com/s/prdtpd8px8649yx/preloader and dsp.zip
NOTE:
Write down you imei somewhere (press *#06# on dialer)
You will be needing it
Method:
-Install all Drivers
-Put scatter file ,extract rom and preloader,dsp_bl in one folder (makes things quite easy) replace if asked
-Turn off phone
-Open Sp Flash tool open scatter file and select the scatter file u downloaded
-put tick on all files on sp flash tool and select its corresponding file (for eg "ANDROID" is system.img)
-Click Firmware Upgrade on sp flash tool and connect phone (turned off)
-It Will show error! Disconnect Phone
-Remove tick from all files
-Now put tick on "BOOTIMG" "UBOOT" "RECOVERY" "LOGO"
-Press Download button and connect phone again (remove battery this time)
-It Will show green circle showing success!
-Disconnect Phone and Turn on phone in recovery mode (Press Vol+ with power button)
-(to navigate in recovery mode press vol + to go up press vol - to go down and press power to enter selection)
TO MAKE BACKUP: in recovery mode enter backup and restore, and backup it will take few mins
TO COPY BACKUP: in recovery mode find mounts and storage and turn on usb mount and connect your phone to computer while being at that mode a removeable drive will show up copy the clockworkmod folder
Okay now listen carefully go to the folder where you downloaded the rom (the one you downloaded from me) find the file system.img
rename it to system.yaffs2.img
then go to the folder where you copied the backup to you will find also system.yaffs2.img there replace that file with the file from the rom (the one you renamed earlier) next open the file "nandroid.md5" with notepad delete all the text it has and save it
now copy this folder back to your phone (replacing the old folder) and the Super su zip u downloaded earlier reboot your recovery (after copying back the backup it is important) NOW:
- factory reset
- go to backup and restore -> advance restore ->restore system
- go to update from sd card and select the super su zip
- reboot your phone normally
After the reboot your phone will be rooted But your imei will be lost
Here what you will do restore your imei:
1. remove all sim cards from phone ,turn on the phone in normal mode and connect it
2. open mtk tools press root button it will ask you for some thing just click ok
3. Click replace imei and enter the imei numbers (can be found on phone box or back of phone)
4. Click ok reboot your phone check for updated imei numbers
And Congratulation Your Phone is Rooted
Credits
@najamahmedisb (testing)
@trm33 (testing)
@threatalive (created the thread resulting in this tutorial)
@rua1 (MTK Droid and Tools)

I can confirm that this method does not only root A2 Classic but it can also repair bricked A2 Classic :victory:
 @bilalz400 you may update the title, so the thread is easily accessible to people in need.
Awesome guide! :good:

I'll tell someone with this mobile if I come across one. People are using these alot since they're quality phones with reasonable prices.

when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....

could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400

RaoTayyab said:
when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....
Click to expand...
Click to collapse
Is you phone rooted do you have su in you app drawer? check again

najamahmedisb said:
could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400
Click to expand...
Click to collapse
Wow bro you mess you phone fast
Hows the quest for modding going on?
Contact @qmobilea2
He might help you in modding your phone
and for your file open mtk droid root and tools go to the root,backup and recovery section click unpack yaffs2 for the section and select system.img from the backup you used earlier this will extract the whole system.img and you will have all the system files you want to replace!
Sry for the late reply's i didnt checked the thread

bilalz400 said:
Is you phone rooted do you have su in you app drawer? check again
Click to expand...
Click to collapse
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx

RaoTayyab said:
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx
Click to expand...
Click to collapse
Very Happy to see your imei restored

can't copy backup
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks

simply root it with Vroot
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.

Easy Rooting Method.
- I am not responsible for bricked phones
-and i am also not responsible if someone hit a bricked phone in your head
-don't worry your data remain safe :laugh::laugh:
Method:
first and first download the software from attached files below the post :good::good::good:
1) Install all the drivers (as the original post suggested ADB and VCOM )
2) turn USB debugging on.
3) Install the software , its in chinese but not very difficult to understand Just press the middle button once installed it should be looked like this (check the attachment )
4) press the button , let the software do its things, once your cell phone restart check the SU app in the drawer.
Caution: Do not Factory restore your phone after freezing apps or modification you will end up in a boot loop.
So what you do with this little Rooted device ?? duh off course make ext 4 partition on your SD Card and link your newly download aps using link2SD . no worrying of low space

AhsanKhaan said:
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.
Click to expand...
Click to collapse
Well if it works that will be a huge bonus!
Sent from my A2_Classic using xda app-developers app

Adnan Farooq Chatha said:
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks
Click to expand...
Click to collapse
Use a memory card reader if removable disk does not appear
Sent from my A2_Classic using xda app-developers app

Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app

New framework etc.....
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...

najamahmedisb said:
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...
Click to expand...
Click to collapse
Bro i already looked into it and trying to fix it
don't post into this thread its a guide not a discussion one

root problem
hey can you help me how can I root my a2 classic?
it doesn't do anything in sp flash tool when I click frimware upgrade? or I click download?

bilalz400 said:
Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app
Click to expand...
Click to collapse
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software

atir usman butt said:
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software
Click to expand...
Click to collapse
Where did you got that file ?

[ROM] Stock Rom Qmobile A50

Hello Everyone Today i finally uploaded the Stock Rom of Qmobile A50
Now many of you guys are requesting for this one so i uploaded.. It took alot time seriously alot on 1mb upload connection but that's no comparison to helping you guys....:laugh::laugh::laugh:
So i have broken the steps of restoring into five parts:
i.e.
1. You have to download the backup.7z from the given link below and then extract it and paste it in you're phone's sd-card root directory
https://docs.google.com/file/d/0B1-OUKCPi2KIVW16YlJDME1ScFk/edit?usp=sharing
2. First you have to turn off you're phone and power it up by pressing and hold the volume up,volume down and power button at the same time...
it will boot into selection mode like below:
https://docs.google.com/file/d/0B1-OUKCPi2KIVnNnX1NSQ09sNEU/edit?usp=sharing
Select the Recovery Modeby pressing volume up button..
3. Then it will take you to the sub menu from it remember here you also have to select Recovery mode and you have to cycle the menu by volume up button and select it from volume down button....
https://docs.google.com/file/d/0B1-OUKCPi2KINmhlenFWRzZlbVU/edit?usp=sharing
Remeber to cycle it from volume up and select from volume down....
4. Now it has taken to the custom recovery you previously installed if you haven't installed it this method won't work..... Now you have to select Backup and Restore menu by cycle it through you're volume up or down button and select it with you're power button....
https://docs.google.com/file/d/0B1-OUKCPi2KIYjZ0M0oyY3BMZTQ/edit?usp=sharing
5. Then it would take you the sub menu of backup and restore now you have to select the restore menu to restore it.....it will start restoring and when on completion restart you're phone...
https://docs.google.com/file/d/0B1-OUKCPi2KIdnAycUNsOGl1dTg/edit?usp=sharing
Voila you're phone is back to life from undead....
Don't forget to hit thanks button...

can i install it on dual core mt 6577 a6?
mera a6 brick ho gaia tha to mai ny claim kia bt ab q fellas ny muje dual core mai a6 dia h i think both a6 and a50 r mt 6577 based mobile and same screen size too. So can i instal JB on my a6

Reply
Hamza_rehman said:
mera a6 brick ho gaia tha to mai ny claim kia bt ab q fellas ny muje dual core mai a6 dia h i think both a6 and a50 r mt 6577 based mobile and same screen size too. So can i instal JB on my a6
Click to expand...
Click to collapse
I suppose if you backup your current rom and save it to you're pc then try it by the way i recommend not to try because it could get you're phone bricked... but that model can handle jelly bean so give it try but at you're own risk... it doesn't cost that much to flash it back to stock rom in the market....
Best of luck.

flash a6
recently i tried to root my cel and successfully its done bt when i replace stock recovery with cwn via mobile uncle tool and boot into recovery mod then cwn recovery does nt work even i tried by pressing volum +,- and power and select recovery it does nt start and after few seconds mobile turns of and normaly with out recovery it works....

Hamza_rehman said:
recently i tried to root my cel and successfully its done bt when i replace stock recovery with cwn via mobile uncle tool and boot into recovery mod then cwn recovery does nt work even i tried by pressing volum +,- and power and select recovery it does nt start and after few seconds mobile turns of and normaly with out recovery it works....
Click to expand...
Click to collapse
So what is it that you need....

no recovery in my cel...with out it i can't formate backup etc...i tried vid sp flash tool bt all in vain...

Hamza_rehman said:
no recovery in my cel...with out it i can't formate backup etc...i tried vid sp flash tool bt all in vain...
Click to expand...
Click to collapse
so you haven't rooted it.....Or you just haven't got recovery after rooting... if you haven't is you're bootloader unlocked..

Help
Hamza_rehman said:
no recovery in my cel...with out it i can't formate backup etc...i tried vid sp flash tool bt all in vain...
Click to expand...
Click to collapse
So if you can't boot into you're recovery then just simply go into fastboot mode but before connect you're mobile to pc..
then extract you're backup .7z it would contain recovery.img and flash it with the following command...
for that you have to required Android sdk which if you have it can reduce you're steps but if you haven't it you got to download it and extract it...
http://developer.android.com/sdk/index.html#download
then download the required files in tools section Android SDK tools and Android SDK platform tools
when you have downloaded it then open the the platform tools folder from you're extracted sdk window paste the recovery.img here then open cmd and go to the directory of platform tools in cmd.. like for example mine is in C:\android-sdk-windows\platform-tools so i will type
cd C:\android-sdk-windows\platform-tools
Click to expand...
Click to collapse
then it will open the cmd for tht folder then type in
adb devices
Click to expand...
Click to collapse
if it does't show then directly go to the fastboot mode from you're mobile and connect it to pc then type
adb reboot bootloader
Click to expand...
Click to collapse
then type th following command.....
fasboot flash recovery recovery.img
Click to expand...
Click to collapse
Sorry but it's my fault you guys have to unpack the backup from .7z and repack it to .zip
then you have a custom recovery now put the repacked zip onto the sd-card root directory then run cwm and wipe data/cache factory format and flash the zip.... with install zip from sd-card...
I Hope This Works :silly::silly::silly:

Thank you brother, you are doing a good job

Thank's
Sent from my Galaxy tab 2 using xda app-developers app

IMPORTANT
Hamza_rehman said:
recently i tried to root my cel and successfully its done bt when i replace stock recovery with cwn via mobile uncle tool and boot into recovery mod then cwn recovery does nt work even i tried by pressing volum +,- and power and select recovery it does nt start and after few seconds mobile turns of and normaly with out recovery it works....
Click to expand...
Click to collapse
Use mine recover.img to flash cwm on you're mobile by mobileuncle

if original contacts.apk and system files of storage etc are accidentally deleted then what can i do because neither contacts or Dialer works in my Noir A50 nor setup wizard works.Plzzzzzzzzzzzzzzzzz

Reply
Sanaullahshuaib said:
if original contacts.apk and other system files of storage are accidentally deleted then what can i do because neither contacts or Dialer works in my Noir A50 nor setup wizard works.Plzzzzzzzzzzzzzzzzzzzzzzz
Click to expand...
Click to collapse
Then Get A Package from the internet of contacts and dialer and go into custom recovery install zip from sd-card, If most of the system apps don't work then you have to backup you're data on you're pc Flash the stock rom of qmobile noir a50 to restore you're data... i have seen a great app for sms and call log backup if you want to it's name is super backup check it on google play....the link for stock rom is down below.....
http://forum.xda-developers.com/showthread.php?t=2475060:fingers-crossed:

Reply
Sanaullahshuaib said:
if original contacts.apk and system files of storage etc are accidentally deleted then what can i do because neither contacts or Dialer works in my Noir A50 nor setup wizard works.Plzzzzzzzzzzzzzzzzz
Click to expand...
Click to collapse
The above quoted apps i have uploaded if you want more apps just let me know.....:angel::angel::angel::angel:
https://drive.google.com/file/d/0B1-OUKCPi2KITUhjcFdkX0QyVEE/edit?usp=sharing

Bricked Noir A50
hey guys i have bricked my noir a50 and now it stucks at boot logo........what to do now any one please help!!

can you boot into bootloader by pressing power+vol up button if so then i can help
Sent from my Samsung Galaxy Tab 2 using XDA Premium HD

help
ZeDaYa said:
Hello Everyone Today i finally uploaded the Stock Rom of Qmobile A50
Now many of you guys are requesting for this one so i uploaded.. It took alot time seriously alot on 1mb upload connection but that's no comparison to helping you guys....:laugh::laugh::laugh:]
Click to expand...
Click to collapse
Hey i have bricked my noir a50 and it stucks at boot logo .....now what to do please help me

Just a test

Hey tihaam take out the battery for 10 to 15 seconds put it back power it on by press and holding power+ vol up button then the recovery mode will be available select recovery then recovery and reinstall rom if cant download the sdk manager install open sdk folder go to platform tools if you see adb.exe connect your mobile to pc then open command prompt type in cd and the folder directory of your platform tool folder after that type adb shell then type adb reboot recovery...it will boot to recovery.....from there flash stock rom...
Sent from my WT19i using xda app-developers app

Installation aborted
ZeDaYa said:
Hey tihaam take out the battery for 10 to 15 seconds put it back power it on by press and holding power+ vol up button then the recovery mode will be available select recovery then recovery and reinstall rom if cant download the sdk manager install open sdk folder go to platform tools if you see adb.exe connect your mobile to pc then open command prompt type in cd and the folder directory of your platform tool folder after that type adb shell then type adb reboot recovery...it will boot to recovery.....from there flash stock rom...
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
Dude... I have tried but..installation gets aborted...i download stock a50 rom and then put that in to my sd card ..then i clicked on intall .zip from sd card but installation was aborted....
i took my mobile to Qmobile centre but the person on the counter instantly said that it has hardware problem... and it will be repaired after changing motherboard ....What the hell...if it had hardware problem then my mobile cannot go even to recovery mode...?????
Please help i will be very thankful to u?

ROOT & CWM Recovery for Qmobile Noir Quatro Z4

Assalam O Alikum,
Hello,
Here after long mind game Alhamdulillah I m sucessfully port CWM Recovery in Z4, Here I M presenting you Root method and CWM Recovery for Qmobile Noir Quatro Z4. CWM Recovery, I was flash via SP-Flash Tool. Both are working perfectly at my device.
How To Root Your Device:
1) Download Framaroot rooting application.
2) Install it on your Quatro Z4 phone.
3) Open the app & select “Install super su” from the drop down menu.
4) Then click on Borimor button.
5) You will get a success message “Success Superuser & su binary installed. You have to reboot your device.
6) Press OK. & Restart your phone. :good:
How to Flash CWM Recovery:
This steps should be done after rooting.
1) Download the CWM Recovery file. (downloading should be done from pc as android default browser may not allow downloading .img file. Or use any third party browser like Dolphin, UC etc.)
2) When the download completes connect your phone to pc, turn on USB mass storage & copy the downlaoded recovery.img file to your phone.
3) Now download this Mobile Uncle Tools app.
4) After installing the Mobile Uncle tools apps, open it.
5) Select Recovery Update option & then TAP the recovery.img option on next screen.
6) After that choose Reboot to Recovery.
7) Your phone will now reboot into recovery mode, use Volume UP & down keys to navigate in recovery mode & Power button to select.
8) In recovery mode, navigate to Reboot System Now (probably this first option) & press the Power button. Select YES to confirm it. now your phone will again bootup in normal mode. :good::good::good:
Congo, you have successfully rooted Qmobile Noir Quatro Z4 & installed the CWM Custom Recovery on it. Go & enjoy some rooted apps & games from play store.Make sure to subscribe us bellow or follow me social networks to stay updated with Qmobile Noir Quatro Z4 development.
Framaroot 1.7.0:
Code:
http://d-h.st/eqr
Mobileuncle MTK Tools v2.9.5:
Code:
http://d-h.st/5Oi
CWM Recovery:
Code:
http://d-h.st/vNd
Remember One Thing DO AT YOUR OWN RISK, I M NOT RESPONSIBLE FOR ANY KIND OF BOOT LOOP OR BRICK.​

thnx ..do u have orginal recovery.img in case of emergency?
Sent from my Z4 using xda app-developers app

Has any one of u tried miui rom ported for noir z4..........if yes did u find any lag plz reply its urgent .......decisive role for me to whether buy it or not....plz.....here u go. http://en.miui.com/thread-12119-1-1.html
Sent from my A2_Classic using Tapatalk 2

mobile uncle doesnt pick recovery.img from sdcard, i have put recovery.img in parent directory of sdcard0, what to do now
actually u missed one step, recovery file should be rename by recovery.img ever with capital R, mobile uncle doesnt pick

cmw recovery not sported in my z4 q mobile what i do..

Plzz give a way to root qmobile s4...
Hey bro...
I have bought QMobile s4 but i cannot find any way to root it or flash any recovery to it...plzz give any recovery or working root method....
Many Many Thanks
Hope u will do this sooon..

How to root Galaxy J1?!

pls help me how to root my phone Galaxy J1 model Sm-100H,found nothing here

test...towelroot not working it said my device isnt supported and changing numbers still not working.

MiHawkBeast said:
pls help me how to root my phone Galaxy J1 model Sm-100H,found nothing here
Click to expand...
Click to collapse
Check this: http://androidground.com/getting-root-samsung-galaxy-j1/
Or this: http://rootmygalaxy.net/how-to-safely-root-samsung-j1-sm-j100h/

GokulNC said:
Check this: http://androidground.com/getting-root-samsung-galaxy-j1/
Click to expand...
Click to collapse
tried rootgenius,froma root,kingoroot all doesnot recognize my phone even i have installed Samsung Usb connecter app

How To Root Samsung Galaxy J1 (SM-J100H)
www dodynoe.com/2015/04/how-to-root-samsung-galaxy-j100h
Tutorial Lengkap Step By Step Root Samsung Galaxy J1 :
Tutorial ini hanya berhasil menggunakan PC
Step 1 :
Download file MD5 ini www mediafire.com/downl…/r99xeoywhdryenc/boot.tar.md5
Step 2 :
Download dan install USB Driver www mediafire.com/…/a4hd8y0c1iakysk/Samsung-Usb-Driv…
Step 3 :
Download Odin v3.10 dan langsung di extract www mediafire.com/…/v26m0vfo1rb9xi6/Odin3_v3.10.6.zip
Step 4 :
Masuk HP nya ke download mode >> Matiin HP nya dulu.Setelah itu HOLD ketiga-tiga button (Power button + Volume Down button + Home Button).Setelah HP nya hidup langsung di rilis (Power button) tapi tetap HOLD Volume Down Button + Home button.Setelah itu pilih COntinue dengan menggunakan button Volume UP.HP agan2 sekarang udah dalam download mode
Step 5 :
Colokin HP ke PC via USb cable
Step 6 :
Buka aplikasi Odin v3.10 yg udah di download tadi.Klik di (PA) button dan pilih file MD5 yg udah di download tadi.Kemudian Klik (START) button.Tunggu sehingga selesai dan HP akan automatis reboot
Step 7 :
Download aplikasi iROOt dan intsall di PC www mgyun.com/en/getvroot
Step 8 :
Buka Aplikasi iRoot yg udah diinstall tadi dan jalankan proses nge-root nya
Selesai...Semoga berhasil
Thx4 Bidin Al-Zaifa

http://download.apks.org/?server=8&apkid=com.kingroot.RushRoot&ver=3.4.1
This can help ... Its kingRoot.apk not .exe .. install it on your phone .. it shoul root itself . !
Sent from my SM-N750 using Tapatalk

The root method recommended by "dodynoe" is the only one that works, at least for me. I have tried all other methods. This one works because it changes the boot.tar directly; your data is not wiped.
Translate that into english if you don't understand. Follow the instruction.
After root, you can delete unneeded apps installed by the application. I also change the su from Super root to Supersu for Titanium to work. Make sure to open supersu, and remove the checked box in "name space" as that is incompatible with Titanium...
Thanks to Dodynoe....

Tried dodynoe's method but I'm stuck in the Samsung J1 logo. Any help will be greatly appreciated ASAP. pls

Malekoo said:
Tried dodynoe's method but I'm stuck in the Samsung J1 logo. Any help will be greatly appreciated ASAP. pls
Click to expand...
Click to collapse
Have you been able to get over the problem? Try again one step by one step.
If that does not work, I am afraid you have to flash the original firmware again. Look at Sammobile for the firmware.

Not yet. I need a stock firmware for SM-J100ML do know where I can get it? Sammobile doesnt have it I think.

Problem...
Malekoo said:
Tried dodynoe's method but I'm stuck in the Samsung J1 logo. Any help will be greatly appreciated ASAP. pls
Click to expand...
Click to collapse
I also stuck on boot logo! please help! :crying:

Could you provide a detailed information on how you get stuck? What step caused that?

nugroho2 said:
Could you provide a detailed information on how you get stuck? What step caused that?
Click to expand...
Click to collapse
I tried the step on rooting my device up there and when i reboot my device it stucked. until now i dont know what to do.:crying:

dodynoe said:
www dodynoe.com/2015/04/how-to-root-samsung-galaxy-j100h
Tutorial Lengkap Step By Step Root Samsung Galaxy J1 :
Tutorial ini hanya berhasil menggunakan PC
Step 1 :
Download file MD5 ini www mediafire.com/downl…/r99xeoywhdryenc/boot.tar.md5
Step 2 :
Download dan install USB Driver www mediafire.com/…/a4hd8y0c1iakysk/Samsung-Usb-Driv…
Step 3 :
Download Odin v3.10 dan langsung di extract www mediafire.com/…/v26m0vfo1rb9xi6/Odin3_v3.10.6.zip
Step 4 :
Masuk HP nya ke download mode >> Matiin HP nya dulu.Setelah itu HOLD ketiga-tiga button (Power button + Volume Down button + Home Button).Setelah HP nya hidup langsung di rilis (Power button) tapi tetap HOLD Volume Down Button + Home button.Setelah itu pilih COntinue dengan menggunakan button Volume UP.HP agan2 sekarang udah dalam download mode
Step 5 :
Colokin HP ke PC via USb cable
Step 6 :
Buka aplikasi Odin v3.10 yg udah di download tadi.Klik di (PA) button dan pilih file MD5 yg udah di download tadi.Kemudian Klik (START) button.Tunggu sehingga selesai dan HP akan automatis reboot
Step 7 :
Download aplikasi iROOt dan intsall di PC www mgyun.com/en/getvroot
Step 8 :
Buka Aplikasi iRoot yg udah diinstall tadi dan jalankan proses nge-root nya
Selesai...Semoga berhasil
Thx4 Bidin Al-Zaifa
Click to expand...
Click to collapse
it's easy

ChielRabssss said:
I tried the step on rooting my device up there and when i reboot my device it stucked. until now i dont know what to do.:crying:
Click to expand...
Click to collapse
You have to be ready when doing the root thing... Learn how to flash original ROM through Odin. Try searching Samsung, flash, rom, Odin, and you will find it... The original ROM is usually available in sammobile website. Sorry, I only can help you this far...
---------- Post added at 01:02 AM ---------- Previous post was at 12:36 AM ----------
Translation, mostly by Google:
Quote:
Originally Posted by dodynoe
How To Root Samsung Galaxy J1 (SM-J100H)
Www dodynoe.com/2015/04/how-to-root-samsung-galaxy-j100h
Complete Step By Step Tutorial to Root Samsung Galaxy J1:
This tutorial is only managed using a PC
Step 1:
Download MD5 file through www mediafire.com/downl.../r99xeoywhdryenc/boot.tar.md5
Step 2:
Download and install the USB Driver. www mediafire.com/.../a4hd8y0c1iakysk/Samsung-Usb-Driv...
Step 3:
Download ODIN v3.10 and directly extract it. www mediafire.com/.../v26m0vfo1rb9xi6/Odin3_v3.10.6.zip
Step 4:
Phone: enter download mode first >>. After being turned off, HOLD all three buttons (Power button + Volume Down button + Home Button). After turned on, immediately release (Power button) but still HOLD Volume Down Button + Home button. After that select Continue using Volume button UP. now your phone is already in the download mode.
Step 5:
Plug the phone to a PC via USB cable
Step 6:
Open the Odin v3.10 application that is already downloaded. Click the PA button and select the MD5 file that is already downloaded. Then Click (START) button. Wait until completed and the phone will automatically reboot
Step 7:
Download application iROOt and install in PC. See www mgyun.com/en/getvroot
Step 8:
Open the iRoot application that is already installed earlier and run the root process
Finish ... Good luck
Thx4 Bidin Al-Zaifa
Edit: open the original website for links... Be prepared as two readers already got stuck in the boot loop. But at least it works for my phone, Samsung J1 (SM-J100H)

Why nobody use google?
here the firmware and everyone with bootprobs flash the whole firm.http://www.sammobile.com/firmwares/database/SM-J100H/

deleted

Root Samsung galaxy SM- J100H
sir please help me for Root my Samsung galaxy SM- J100H it is not working for kingo root, i Root, towerl root
so plz give the CF auto root file for my Samsung galaxy SM- J100H

just like a charm
working method, smooth and easy on my device running on kitkat 4.4.4
if you stuck after flashing, maybe your device is not compatible with this boot image
my device is SM-J100H with build number KTU84P.J100HXXUA0C1
btw, dody is indonesian. mybe it's just working with indonesian or malaysian firmware version of SM-J100H.
CMIIW
Note: My device got unofficial after flashing with this boot image, but i dont really care about it. just a little info for you guys.

I tried it and it worked. Thanks a lot dodynoe