Just got my Note 3 (SM-N900v) and first thing I tried to do is root it with Root De La Vega.
True confession: I had no backup before trying to root.
I downloaded the Samsung drivers and installed them.
I downloaded the Odin3.09 program and installed it.
Booted the phone into download mode.
Connected the USB3 cable to the phone.
Started Odin, added the root de la vega file and clicked start.
It gets as far as this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Root_de_la_Vega.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> SingleDownload.
<ID:0/014> cache.img.ext4
<ID:0/014> NAND Write Start!!
<ID:0/014> FAIL! (Auth)
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After it failed the first time, I unplugged the phone and pulled the battery to start over, only this time when it
powered up, it told me:
"Firmware upgrade encountered an issue. Please use Software Repair Assistant & try again"
I'm stumped and don't know what to do now. Any suggestions would be greatly appreciated.
Model:SM-N900V Android Version = 4.4.2 Baseband version =N900VVRUCNC4
Hi there,
All you need for recover your device is in this thread:
[HOWTO] Recover from a HARD BRICK [N900V] [MJE/NC2/NC4]
For other questions please post here:
Verizon Galaxy Note 3 Q&A, Help & Troubleshooting
Good luck
Related
Hi Everyone,
A friend of mine gave me her recently deceased husband's phone to see if I can bypass the pattern lock so that she could save the data in it. I have been trying all sorts of things and I'm having no luck with it.
The phone is a Samsung Galaxy Duos S6802. I can't access it via adb and it does not have a custom recovery, just the stock android recovery. I have tried flashing the latest official rom hoping that would somehow disable the pattern lock but it didn't. I flashed iDuos Kernel by manoranjan2050 from this thread http://forum.xda-developers.com/showthread.php?p=33037765 but it still did not solve my problem. I tried to flash clockworkmod recovery via Odin but it failed.
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> cwm-trebon.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> recovery.img
<ID:0/011> NAND Write Start!!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I don't know what else I can do. Any help anyone here can offer is very much appreciated.
Thank you very much.
I factory reset my Samsung Grand 2 then charged it. When I saw my phone it was updated in kitkat. I accidentally hit the install and reboot. But after that, it stuck in logo screen. I've tried to wipe data, cache and everything. So, I flash it with odin with correct latest firmware. But it keeps on failing and appears firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Ive tried to fix it with Kies but there's no chance. I also brought it to service center but they said it keeps on failing and the program cant enter.
This is the ODIN log:
ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_stock_system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've been searching how to fix my phone.
PLEASE SOMEONE HELP ME.
xilaaa said:
I factory reset my Samsung Grand 2 then charged it. When I saw my phone it was updated in kitkat. I accidentally hit the install and reboot. But after that, it stuck in logo screen. I've tried to wipe data, cache and everything. So, I flash it with odin with correct latest firmware. But it keeps on failing and appears firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Ive tried to fix it with Kies but there's no chance. I also brought it to service center but they said it keeps on failing and the program cant enter.
This is the ODIN log:
ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_stock_system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've been searching how to fix my phone.
PLEASE SOMEONE HELP ME.
Click to expand...
Click to collapse
See if you have the proper firmware and read the instructions here: http://forum.xda-developers.com/galaxy-grand-2/general/stock-firmware-grand-2-google-drive-t2849501
Or else you could ask help from anyone having a similar phone in this forum: http://forum.xda-developers.com/galaxy-grand-2
I tried the instruction but it didn't work still failed. I also tried to flash it with original stock but it says SW REV CHECK FAIL : [sbl1]Fused 1 > Binary 0
Im losing hope. Please help :crying: :crying:
xilaaa said:
I tried the instruction but it didn't work still failed. I also tried to flash it with original stock but it says SW REV CHECK FAIL : [sbl1]Fused 1 > Binary 0
Im losing hope. Please help :crying: :crying:
Click to expand...
Click to collapse
I don't know specifically about your phone.
Only asking someone here would help: http://forum.xda-developers.com/galaxy-grand-2/help
I tried to downgrade my phone but it shows SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
First off, I have TWO (2) of these guys. Same model number. I flashed 1 successfully. These came from a flea market. The one that upgraded successfully was working. The other one, was labeled "PARTS" and just bootloops.
This one, I am UNABLE TO GET INTO RECOVERY by pressing "PWR+VOL DOWN", unlike the first one. I AM able to get into DOWNLOAD mode and attempt to flash the 4.2.2 update like I did the first one.
The problem is ODIN is throwing a "FAIL!" on this one.
Code:
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5113UEUCMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin engine v(ID:3.1005)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> SingleDownload.
<ID:0/014> boot.img
<ID:0/014> NAND Write Start!!
<ID:0/014> FAIL!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am using ODIN 3.10. Not sure if there is any way to force a recovery. I don't OWN these, they are a Co-Workers. Just curious if using a PIT file to repartition would be best, or if I need to flash a new bootloader or something. In DOWNLOAD mode, the screen says:
Odin Mode:
Product Name: GT-P5113
Custom Binary Download: No
Current Binary: Samsung_Official
Any help?
Update:
Tried to use a PIT file to restore the partition tables, but all I get is "There is no PIT Partition". I have tried a few PIT files for the 5110/5113 as well as trying to flash it standalone and with said ROM. Not sure if there are any other methods or steps involved.
Any help would be awesome!
Hello,
I have a sprint samsung note 4 (SM-N910P). I rooted it using Odin, installed twrp recovery, and installed CM12.1. It all went ok until for somereason I had no cell service. I then tried a few things I saw on here and had no luck (updating the modem and VPNs). So I tried to revert back to stock rom from a twrp backup. It went ok but there was no mobile data or even signal at all. I looked up how to unroot my device and watched a few videos. Using Odin3.09 I attempted to try it. I downloaded the stock firmware for my device from sammobile and whiped *ALL* data including backups, because that's what the video said to do. Well... When I tried it Odin, sadly, failed again and displayed this message yet again:
UDC Start
SW REV Check Fail: (Aboot) Fused 3 - Binary 1
(1)eMMC write fail: ABOOT.
Odin said:
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU1BOB7_N910PSPT1BOB7_N910PVPU1BOB7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I even took it to sprint and they had trouble flashing stock firmware on it too. Does anyone know how to fix this or what it at least means? I have a $700+ phone that is now useless, because I screwed it up somehow. Please help...
Thank you.
Hi there
You'd be best served asking for help from the experts who own your device, here:
Sprint Galaxy Note 4 Q&A, Help & Troubleshooting
Good luck
Hi,
I have a SAMSUNG GALAXY S5 VERIZON and I treid to restore it to its stock rom using ODIN.
I have used every version of odin and I keep getting the same message:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900VVRU1ANCG_G900VVZW1ANCG_G900VVRU1ANCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried multiple PC's multiple cables and multiple STOCK MD5 files.
I am Able to get to download mode and recovery boot.
I have tried almost every troubleshoot posted online so far.
On download screen I get SW REV CHECK FAIL: [aboot]Fused 2 > Binary 1
[IMG="ERROR"]
URGENTLY NEED HELP!
Thanks guys
Hi,
Thanks for writing to us at XDA Assist.
You can post your question in your device forum help section to get further help:
Verizon Galaxy S 5 Q&A, Help & Troubleshooting
Good luck!