[Completed] Can not connect via usb - XDA Assist

after a hard reset , when i conect the phone (huawei honor 3c 4.4.2) does nothing but charging
it does not give me the option to connect with mtp, flash drive or hisuite nothing happens, its like i just put it for charge
i hard reset again
i remove battery an sim cards and reinstall it like i red in a forum with the same problem for samsung s3
i went to storage but i do not have option for usb
also i enable usb debugging

Hi there,
The best place to receive an relevant answer is in one of the bellow threads but first register an account on XDA:
Huawei HONOR 3C - FAQ , TIPS , TWEAKS , ROOT , KITKAT , UNBRICK ,MOD's,HARD BRICK...
[GUIDE] Huawei Honor 3C H30-U10 - Bootloader Unlock, Root, TWRP, CWM, KitKat
Good luck

Related

[Completed] [Q] Huawei Honor H30-U10 Strucks at Flash

HI,
I had bought a Huawei Honor 3C just a week ago and I was looking for a kitkat update and when I installed it from local updates from the settings the phone got screwed up.
When I start the phone, huawei logo appears and the phone restarts continuously. When I try to flash it using SP Flash tool it shows up the following error
+++++++++++
BFROM ERROR : S_SECURITY_SF_CODE_DOWNLOAD_FORBIDDEN(6010), MSP ERRORE CODE : 0xxx.
[User] vTO download code area is forbidden in this phone!
++++++++++
I am unable to do anything since the phone restarts and the even in the Device manager the phones driver shows up for a few seconds and then goes away, Please help
Thanks in Advance
Hi,
I found a dedicated thread for your device that you can likely find help in,
Android Development and Hacking>Android Q&A, Help & Troubleshooting>Huawei HONOR 3C - FAQ , TIPS , TWEAKS , ROOT , KITKAT , UNBRICK ,MOD's,HARD BRICK
Good luck!

[Completed] Huawei honor 6 h60-L02 bricked

Hi
Bricked Honor 6 , H60-L02
hi
i can only acces the fastboot and rescue mode when i plug my Phone on my pc tru usb and i dont know how to get any new firmware on my honor 6.
when its not connected to my pc it onlu shows the ' Honor' sign and ' powered by android '
when the battery is flat and i load it , it shows the battery load indicater so i think that the Phone is not completeky deadh.
Is there anyway to remove all the firm and software and afterwords put new firmware on the Phone
Please help me out :crying:
Hi,
I suggest asking the members in this thread on your device,
> Android Development and Hacking > Android General > HUAWEI Honor 6 Review, Unlock Bootloader and ROOT
Good luck!
Thank you. Thread closed.

[Completed] BRICK

hello guys i am using HONOR 4x che1-L 04
1.i had removed my previous rom (no backup)
2.unable to install twrp and also unable to open recovery mode (i tried using moblie and pc)
3.And i am stuck in bootloader without usb debugging
4.phone is rooted
5.currently no rom in the phone
can any one help me out from this please
Hi
Thanks for writing to us at XDA Assist.
Instead of posting in a wrong forum try asking in the thread below:
Huawei HONOR 4X- FAQ ,TIPS,TWEAKS , ROOT, CWM,LOLIPOP
Good luck!

[Completed] Huawei P8 Lite Hard Bricked

Hi,
Is there someone who can help me with a little BIG problem.. :crying:
My Huawei P8 Lite brick after update from original lollipop to marshmallow !
When I turn on a smartphone, only is lighting LED red green, red green repeats some times, +/- 20 seconds and after turn off automatically.
I can't go to recovery, fastboot, bootloader etc, nothing work, no methot wokr, vol up down + power negative, down + power negative, up + power negative , down + usb cable conectet do PC negative.....
Only lighting LED, and when I connect it to PC , in manage PC detect USB with om Chinese letters.
Exist some Flash Tool for Huawei P8 Lite ?
Hello and thanks for using XDA Assist,
A dedicated forum for your device is located here you can visit and ask your questions there, experts for your device should be able to help you there.
You can also refer to [Guide][Huawei P8] TWRP + Root Systemless Marshmallow Installation (GRA-L09&GRA-UL00) for future installation
Always read carefully before proceeding.
Good luck,
DC07

[Completed] Huawei Ascend P1 no os installed TWRP

Hi all, I have been looking for an answer for days, but still can't figure out what to do, here is the problem:
I have an old HUAWEI Ascend P1, long time ago I rooted it and installed a custom OS, a few days ago it started not to boot anymore (it was stuck on the huawei logo), after a few attempts I managed to boot into TWRP (v.2.4.4.0), and, even after reboot, it still didn't start (stuck on logo). Then, I think I did a factory reset (can't remember exactly what I did, ), anyway I ended up with TWRP saying "No OS installed, are you sure you wish to reboot" X#....
after that when I switch the phone on normally it stays stuck on the HUAWEI logo forever, and if I plug it via usb to my PC (when switched off), it starts with TWRP...I don't have any backup, and actually I don't even have any rom (the SD card I used at that time doesn't belong to this world anymore, and the one I use now is clean of any rooting stuff...).
What should I do? How to reinstall any OS? After all it is not completely bricked since I manage to boot with TWRP, the problem is that I don't know almost anything about this stuff..
Hi there and welcome to assist,
Try some solutions from here: [GUIDE] Huawei Ascend P1 U9200 AIO
But firs see if this info's help you: [Q] fastboot flashing errors
You'll have to create an account to post in the main forums if you have any other questions.
> Huawei Ascend P1 > Ascend P1 Q&A, Help & Troubleshooting
Good luck

Categories

Resources