Hi all, I have been looking for an answer for days, but still can't figure out what to do, here is the problem:
I have an old HUAWEI Ascend P1, long time ago I rooted it and installed a custom OS, a few days ago it started not to boot anymore (it was stuck on the huawei logo), after a few attempts I managed to boot into TWRP (v.2.4.4.0), and, even after reboot, it still didn't start (stuck on logo). Then, I think I did a factory reset (can't remember exactly what I did, ), anyway I ended up with TWRP saying "No OS installed, are you sure you wish to reboot" X#....
after that when I switch the phone on normally it stays stuck on the HUAWEI logo forever, and if I plug it via usb to my PC (when switched off), it starts with TWRP...I don't have any backup, and actually I don't even have any rom (the SD card I used at that time doesn't belong to this world anymore, and the one I use now is clean of any rooting stuff...).
What should I do? How to reinstall any OS? After all it is not completely bricked since I manage to boot with TWRP, the problem is that I don't know almost anything about this stuff..
Hi there and welcome to assist,
Try some solutions from here: [GUIDE] Huawei Ascend P1 U9200 AIO
But firs see if this info's help you: [Q] fastboot flashing errors
You'll have to create an account to post in the main forums if you have any other questions.
> Huawei Ascend P1 > Ascend P1 Q&A, Help & Troubleshooting
Good luck
Related
Guys my phone Huawei Ascend G700-U10 went into a boot loop (i.e. it starts with Huawei logo and then restarts continuing the same process) when I tried to install a custom recovery. I searched everywhere but I could not find the exact solution as my phone cannot boot into recovery mode...please help!
Hi there,
Here is the best place to read/ask:
[Q] Huawei Ascend G700 stuck at bootloop
Good luck
Finally fixed that error
After lot of searchings I finally fixed my phone using sp flash tool and installing proper drivers (From SP_Drivers V1.4) and thanks for your reply I am happy now!!
Thread closed, thank you.
Hello guys, I used my phone but it suddenly froze. I remove the battery and when i turned on my HUAWEI Y600-U20 wont boot anymore. When i powered on it freezes on HUAWEI ASCEND text. It is not boot loop also because i cant even see the HUAWEI logo which is like a flower. Before i experienced boot loop in the same phone but it was fixed when i flashed it but now, even when i format or flash it it still wont work. What is the problem of this?
bryanjez said:
Hello guys, I used my phone but it suddenly froze. I remove the battery and when i turned on my HUAWEI Y600-U20 wont boot anymore. When i powered on it freezes on HUAWEI ASCEND text. It is not boot loop also because i cant even see the HUAWEI logo which is like a flower. Before i experienced boot loop in the same phone but it was fixed when i flashed it but now, even when i format or flash it it still wont work. What is the problem of this?
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Unfortunally i couldn't find the device forum for your mentioned one so the better way to ask is to do it here >>> Android Q&A, Help & Troubleshooting
Good luck!
Hi
So i rooted my device and tried to install TWRP if i can remember right, and i wanted to check the version for the y300 and accidently pressed yes to install it, then my phone just shut down and rebooted, but then got stuck at the boot logo, and won't enter recovery mode or anything else, and if i try charging it, it tries booting too, so basically i can't charge it, and can't get it to boot, nor to get it to enter recovery mode or anything, i got it like a week ago and i just dont want to screw it up for good..Can i please get some help?
Hello,
Welcome to XDA.
I am not finding a device forum for your model number. Try posting your issue in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good Luck.
Good morning to all of the bosses here and to everybody...I am also new in adventuring in custom rom flashing. Oh God, I just afford a zenfone 6 and quickly I decided to mod it with custom roms. I tempted to update it manually to lollipop and it was successful. Then I decided to downgrade to kitkat in order to unlock the bootloader. I was served on internet with 2 ota files(6.2.2.2 and 6.3.3.3). I flashed the file 1 with success but as for the file 2, my phone didn't finished the process and switched off itself. I turned it on and it directly went on recovery trying to finish the downgrade. When the phone tried to reboot it stucked on asus logo. I went on recovery and made a hard reset, but it kept stuck on the asus logo at boot. Now came the bad luck; I found tutorial on internet on how to unbrick zenfones. I precise that almost all the tutorials spoke about the case zenfone 5 and 6 are stuck on usb logo, but mine manifested itself in a cycle of 5 to 7 reboots before showing the usb logo and then turns off itself definitively about one minute after that usb logo, and I have to turn it on again for a new cycle again. So that bad luck is that I saw that tutorial to unbrick zenfone with a method using usb intelsoc and other tools I forgot the names. I installed these stuffs with success and my device could be detected ready for flashing. The files that had to be flashed are fastboot.bin, ifwi.bin, dnx.bin, osr dnx.bin...I flashed them successfully, but unlesse I get my phone on its usual asus droidboot screen, it ended up by a frozen intel inside logo. I tried to put it into droidboot or recovrey, but to no vail. The reboot cycle was still there. Then I saw a tutorial on zenfone 5 stuck at intel inside logo where it was said to add a file called ...fuse.bin. I tried to find one for zenfone 6, but I didn't find it...so...so...so I used that fuse.bin intended for zenfone 5 and flashed my zenfone with it. The flash wax successful but when the phone rebooted...BLACK SCREEN!!! With some vertical white stripes appeared. No image, but cycle of reboot continue without the usb logo this time. The phone is still detectable and I even tried to reflash the previous file without that bad fuse.bin, successful but screen is still black...oh God help me, oh my new phone, everybody here help me recover my phone please!!! The version of my phone is TW version...thanks in advance!
Hello and thank you for using XDA Assist,
your device don't have a device specific forum here on XDA. Please create a thread here:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you. Good luck!
Kind regards
Trafalgar Square
XDA Assist
I got a huge problem. After my phone updated to Marshmallow I lost root permissions. I looked up some tutorials to root it again. But every step I took just made things worse:
1. I booted my phone to TWRP v2.8.7.0 using adb/fastboot (bootloader still unlocked after last root)
2. I installed Super-SU, which was meant to root my device according to those instructions
3. I rebooted my phone (maaany times) realizing I can't really get back to my firmware.
4. Eventually I wiped phone's memory hoping it might help, however Huawei's emergency recovery failed to reinstall system.
5. Now I'm powering a plant, which can only boot into TWRP
Guys, I've never started a thread before, but right now I got no idea what's going on or what to do. I'll apreciate any clues. Thank You in advance.
Hi there,
It seems that you already found the best place on XDA to post your question.
> Huawei P8lite > P8lite Q&A, Help & Troubleshooting
Please continue your journey there.
Good luck
Razvan