HI,
I had bought a Huawei Honor 3C just a week ago and I was looking for a kitkat update and when I installed it from local updates from the settings the phone got screwed up.
When I start the phone, huawei logo appears and the phone restarts continuously. When I try to flash it using SP Flash tool it shows up the following error
+++++++++++
BFROM ERROR : S_SECURITY_SF_CODE_DOWNLOAD_FORBIDDEN(6010), MSP ERRORE CODE : 0xxx.
[User] vTO download code area is forbidden in this phone!
++++++++++
I am unable to do anything since the phone restarts and the even in the Device manager the phones driver shows up for a few seconds and then goes away, Please help
Thanks in Advance
Hi,
I found a dedicated thread for your device that you can likely find help in,
Android Development and Hacking>Android Q&A, Help & Troubleshooting>Huawei HONOR 3C - FAQ , TIPS , TWEAKS , ROOT , KITKAT , UNBRICK ,MOD's,HARD BRICK
Good luck!
Related
Hi
Bricked Honor 6 , H60-L02
hi
i can only acces the fastboot and rescue mode when i plug my Phone on my pc tru usb and i dont know how to get any new firmware on my honor 6.
when its not connected to my pc it onlu shows the ' Honor' sign and ' powered by android '
when the battery is flat and i load it , it shows the battery load indicater so i think that the Phone is not completeky deadh.
Is there anyway to remove all the firm and software and afterwords put new firmware on the Phone
Please help me out :crying:
Hi,
I suggest asking the members in this thread on your device,
> Android Development and Hacking > Android General > HUAWEI Honor 6 Review, Unlock Bootloader and ROOT
Good luck!
Thank you. Thread closed.
Hello Guys,
I hard bricked my Zenfone 5 ( A501CG ) while trying to flash CM 12.1 . hard bricked in the sense that my droidboot/fastboot got corrupted and I am stuck at Asus/intel logo when trying to enter droidboot ( using power + volume up),it is not proceeding further from there.
Now if you ask me, what all I have tried to recover my phone,I would say almost every thing posted on the internet ( so please don't ask me to try different button combinations to enter droidboot or any unbrick method using fastboot ).
There's only one way to recover my phone and that is to use xFstk/manufacturing flash tool/intel phone flash tool lite, all are similar and flash firmware,fastboot and android image into intel chipsets based phones.
They require files Fw DNX,ifwi,OS Dnx and OS Image to flash fastboot into your phone. I have got all these file downloaded from links posted in other threads but they are not working with Zenfone 5 (A501CG). My phone flash tool is going in loop while flashing ifwi after giving info " Firmware download completed. Continuing to OS..." (plz check attached log file and screenshot ).
Ok,So I tried flashing lenovo K900's ( also has intel coloverview chipset) Fw DNX,ifwi,OS Dnx and OS Image files and it got succeeded , but obviously it didn't work because these files doesn't belong to ASUS Zenfone 5 chipset.
Guys, I am desperately in need of files Fw DNX, ifwi,OS Dnx and OS image which are meant to be used with Zenfone 5 ( A501CG T00J) , I have already tried all the files which comes in asus official ROM which are inside ifwi.zip but they didn't work.
Senior members plz help.......I will be very grateful to you guys,if the I can recover my phone.:angel::angel::angel:
Thanks
Thanks for quick reply, as the files which I downloaded where not working so I tried to flash firmware files of lenovo K900 :crying::crying:
yes my pc see the device every thing is working fine, after "Firmware download completed. Continuing to OS..." the flashtool is going in loop,no downloading of OS.
My bootloader is corrupted and I can't enter into it.
country :India
WW version
plz reply asap
Hello, and thank you for using XDA Assist!
A good place to look for your issue (in lieu of a forum) is the ASUS Zenfone 5 and Zenfone 6 - All you need to know about thread of the > Android Development and Hacking > Android Q&A, Help & Troubleshooting forum.
Unfortunately I don't see the file attachment's you are looking for, but if you post in the thread your predicament the experts should provide a helping hand.
Hope this helps, and good luck!
hi,
i've (or had) a Zopo ZP999 with mt6595 Soc...after a firmware update my radio lost signal, then i tried to flash my device
despitly he got bricked, i explain
when i open the SP flashtool 5.13 (version certified for 6595), select scatter file and can download all sub-items, disconnect/reconnect phone, flash starts
- DA passed
- BL passed
- then start then system download...after 7% the download stop without error
i redo, now it stops after 33%, another time afetr 22%
i checked preloader is installed corectly
anyone an idea?
Zopodroid said:
hi,
i've (or had) a Zopo ZP999 with mt6595 Soc...after a firmware update my radio lost signal, then i tried to flash my device
despitly he got bricked, i explain
when i open the SP flashtool 5.13 (version certified for 6595), select scatter file and can download all sub-items, disconnect/reconnect phone, flash starts
- DA passed
- BL passed
- then start then system download...after 7% the download stop without error
i redo, now it stops after 33%, another time afetr 22%
i checked preloader is installed corectly
anyone an idea?
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
There is no forum specifically for the Zopo ZP999 but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help where members familiar with your device might be able to advise you. Since your device is not widely used, please be patient and give the experts plenty of time to respond.
Good Luck!
[solved]
hi,
found solution
I uninstall/reinstall vcom driver and changed usb cable...flash OK....phone alive again
can be closed
Hello ,
i need support , i have Huawei honor 6 plus it failed during upgrade and when try to recover by loading many from firmware to SD card it stucks at 5%.
when i enter boot mode , it gives error hone is locked then i try to login to upgrade mode it stop at 5% whenver the software that is on the SD card ,
now my mobile is completely damaged
Ahmadosama said:
Hello ,
i need support , i have Huawei honor 6 plus it failed during upgrade and when try to recover by loading many from firmware to SD card it stucks at 5%.
when i enter boot mode , it gives error hone is locked then i try to login to upgrade mode it stop at 5% whenver the software that is on the SD card ,
now my mobile is completely damaged
Click to expand...
Click to collapse
Hi Ahmadosama
Thank you for using XDA Assist
As we do not have an specific forum dedicated to your device, our experts at the below forum should be able to help you. Please be welcome to ask in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.
I used debloater to HIDE all apks/apps and brick my phone. It went to huawei eRecovery and i clicked (download/repair/istall ) or something like that. It connected to wifi and started downloading packages but then said it failed. I tried everything. Other choices were shutdown, reboot but they didnt help.
HUAWEI HONOR 7 LITE
Hi there and welcome to assist,
Here is all you need:
[SOLVED] Bricked + Formated my Honor 7. Need a ROM - see post #2
[ALL MODELS][FIRMWARE] Stock Firmware Packages Of Honor 7
You'll have to create an account to post in the main forums if you have any other questions.
> Honor 7 > Honor 7 Q&A, Help & Troubleshooting
Good luck