Related
I searched the threads on this but can't find specifically what I'm looking for.
I purchased the Z Pad dock for my G Tab and just got it in and hooked it up. It will charge through it and the USB works, haven't tested the RJ-45 connection but I connected it to my TV and it will not display anything. My TV has a DVI connector and I have a HDMI to DVI adapter and I know the adapter works because it works with other devices.
Also, HDMI and DVI video are exactly the same digitally as far as signal go so my question is, has anyone else used an adapter to connect it to the DVI port and if so did it work or not?
Just wondering if it needs to be specifically connected to a HDMI port to receive other feedback from the port to the device to turn it on. My Droid X will connect with this method.
Also, When I got the dock it had a rattle, so I cracked it open and the counter weight was loose as the mounting tabs were busted off. It was banging on the ribbon cable to the dock connector. I disassembled it and examined the cable and saw no damage and since all of the other features work I figured it might be the connection method but want to make sure. I secured the weight and closed it back up.
I also ordered a HDMI to composite RCA converter but haven't received it yet as I want to be able to connect it to any available display so I am not able to try that yet.
In short, has anyone else tried to connect it using a HDMI to DVI connector and not have display output? P.S. I did have the charger connected to power the internal dock board as it is not just a passthrough.
Just want to know before I attempt to send this back as a defect or hunt down other methods of connectivity.
Thanks in advance,
Brian
I have found that the hdmi out wont work unless the power supply is connected! so basically make sure the tablet is charging when you want the HDMI to work! Hope this helps!
Yes, I know that and said I had it plugged in. Thanks. Just wondering if someone else had trouble using a HDMI to DVI connector with the G Tab.
Brian Oshman said:
Yes, I know that and said I had it plugged in. Thanks. Just wondering if someone else had trouble using a HDMI to DVI connector with the G Tab.
Click to expand...
Click to collapse
Brian, Not sure how much it helps but I have a Ztab and it is working fine going HDMI --> HDMI on my TV. Are you having problems with a HDMI --> DVI connector? If you haven't already tried it, you could try rebooting the tablet with it in the dock. I've found that helps with mine sometimes.
Sent from my VEGAn-TAB-v1.0.0b5.1.1 using Tapatalk
well Brian I can tell you that Hdmi to dvi Works well.
I have the same dock, and i use it at work all the time via dvi adapter.
I assume your dock still works not using the adapter?
I plugged mine into my TV and it showed right up, but of course, I am using HDMI to HDMI. The only thing I can think of that might be a problem is you'd lose sound in the process, unless its smart enough to know the sound isn't connected via HDMI and keeps it coming out the speakers.
I did try to reboot it and it did not show up. Thanks for posting that it did work with the DVI adapter as that is how I have it set up. I know the adapter works as I use it with my Droid X and it works with that.
I will play around with it some more and wait until the coposite converter I ordered comes in as that is HDMI in to Composite out and see if that works. If not then I will send it back as a defect. I bet the counter wieght being broken loose inside did something to the ribbon cable.
Anyone use a HDMI to composit/RCA hookup yet? Mine is on order and am hoping I can use it on my older 4:3 40 inch Hitachi.
Mrwoodchuck said:
well Brian I can tell you that Hdmi to dvi Works well.
I have the same dock, and i use it at work all the time via dvi adapter.
I assume your dock still works not using the adapter?
Click to expand...
Click to collapse
Do you use it to display text? I find the quality from my Zpad, using the dock, to be pretty average for text. Did you change any settings?
Cheers, Mal.
One of the displays I need to connect with the Transformer only have dsub and dvi connections. Has anybody hooked up their tablet through an hdmi/dvi converter?
I have no hdmi cables to test out, and didn't want to spend the couple of bucks for a cable that I have no use for.
Good question. Bumping to get attention.
Sent from my Transformer TF101 using XDA Premium App
I haven't received mine yet, but I think a mini-HDMI to HDMI cable -> HDMI to DVI adapter -> DVI cable should work.
It works for me, at least, I'll just be leaving the DVI cable on my desk and taking the HDMI cable with me when I leave work.
I'll post my results when it arrives on monday.
Edit: May just be able to put the adapter on the monitor and skip the cable altogether.
Like I said, I'll post
JCopernicus said:
One of the displays I need to connect with the Transformer only have dsub and dvi connections. Has anybody hooked up their tablet through an hdmi/dvi converter?
I have no hdmi cables to test out, and didn't want to spend the couple of bucks for a cable that I have no use for.
Click to expand...
Click to collapse
I have bought a dvi to HDMI converter to try this out, but have not been near a monitor with dvi input all week. I'll update you on Monday, when I return to work.
I appreciate it guys.
=)
It will work fine, since all the signals are digital. Yes it really is that simple.
Except that I haven't seen a single mention as to whether the TF is using HDCP for it's HDMI output. If that's the case then a DVI converter will not work.
seshmaru said:
It will work fine, since all the signals are digital. Yes it really is that simple.
Click to expand...
Click to collapse
^This
JCopernicus said:
Except that I haven't seen a single mention as to whether the TF is using HDCP for it's HDMI output. If that's the case then a DVI converter will not work.
Click to expand...
Click to collapse
I'm pretty sure HDCP has to do with the monitor/tab not the i/o. My Dell 2407WFP is HDCP, has no HDMI (DVI/VGA only) and my TF works with it.
Sent from my Asus Decepticon using Tapatalk
Jocelyn said:
^This
I'm pretty sure HDCP has to do with the monitor/tab not the i/o. My Dell 2407WFP is HDCP, has no HDMI (DVI/VGA only) and my TF works with it.
Sent from my Asus Decepticon using Tapatalk
Click to expand...
Click to collapse
Well good to know someone has it working. Do you have it setup through a single cable, or through a converter?
mini hdmi to dvi cable
Found this:
http://www.shopfsi.com/6_Mini_HDMI_to_DVI_Cable_p/minihdmi-dvi-6ft.htm
Curious if anybody is using one. Might try dealextreme to get one on the cheap.
altarity said:
Found this:
http://www.shopfsi.com/6_Mini_HDMI_to_DVI_Cable_p/minihdmi-dvi-6ft.htm
Curious if anybody is using one. Might try dealextreme to get one on the cheap.
Click to expand...
Click to collapse
Just get these from monoprice. Same thing for way less and probably better quality. I buy all of my cables from them.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10419&cs_id=1041902&p_id=2029&seq=1&format=2
http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10242&cs_id=1024201&p_id=3645&seq=1&format=2
altarity said:
Found this:
http://www.shopfsi.com/6_Mini_HDMI_to_DVI_Cable_p/minihdmi-dvi-6ft.htm
Curious if anybody is using one. Might try dealextreme to get one on the cheap.
Click to expand...
Click to collapse
35$ is too much though. Cheaper options on ebay i bet.
.im facing that problem now with my computer monitor. I hooked up the pad by two seperated ways-first with a dvi2hdmi adapter connected to a simple dvi cable, didnt work.second try was with a special 5 meters dvi2hdmi cable.again.didn't work. I don't know what to do? I tried it with another dvi lcd and it just saying that the monitor went to sleep mode.
Important to say that mirroring to a TV LCD or plasma works great whitout any problem.
What's the dvi problem?
i tried this with a samsung monitor. using dvi-to-hdmi-to-minihdmi adapter. i don't know if it's just 1 adapter too many, but it doesn't seem to work.
I don't need a signature.
num1gever said:
.im facing that problem now with my computer monitor. I hooked up the pad by two seperated ways-first with a dvi2hdmi adapter connected to a simple dvi cable, didnt work.second try was with a special 5 meters dvi2hdmi cable.again.didn't work. I don't know what to do? I tried it with another dvi lcd and it just saying that the monitor went to sleep mode.
Important to say that mirroring to a TV LCD or plasma works great whitout any problem.
What's the dvi problem?
Click to expand...
Click to collapse
Does the monitor support hdcp?
Sent from my HTC Eva 4G using Tapatalk
Jocelyn said:
Does the monitor support hdcp?
Sent from my HTC Eva 4G using Tapatalk
Click to expand...
Click to collapse
Dont know. My monitor is lg l227wtp.
The second one i have is also lg, but e2350t
num1gever said:
Dont know. My monitor is lg l227wtp.
The second one i have is also lg, but e2350t
Click to expand...
Click to collapse
Please help!
cjwilber said:
I have bought a dvi to HDMI converter to try this out, but have not been near a monitor with dvi input all week. I'll update you on Monday, when I return to work.
Click to expand...
Click to collapse
Didn't work for me. The monitor just doesn't see the Transformer. Might be a dodgy adapter because the HDMI cable works fine.
Didn't work for me either with 3 different types of Dells at work. Just registered after lurking for weeks just to comment on this issue!
I can't post the URLs as a noob but the cable and converter are from Amazon.
I have newer Dells at home I can test with but that was not the point...
Drats!!!
Any kind of hacks to get around whatever is preventing this from happening...??
same problem here. got a dvi > hdmi adapter, connected with a 1.8 meter mini hdmi > hdmi cable to a samsung monitor..
no screen image...
connecting direct to my tv (hdmi) works fine!
edit: read some stuff on the xoom forums about a 5 volt line that's missing in the mini hdmi out... and the need for a hdmi>vga convertor in some cases.. (expensive)
Strange thing is, i connected my popcorn 110 to the monitor and it works flawlessly .. both got hdmi 1.3a ..
OK, I have no idea what I'm missing here. When I plug the HDMI cable into the phone, nothing happens. TV stays black and I get no prompt on the phone. What am I missing here? The cable is brand new, Andy phone is not rooted. I'm running go launcher and go locker. Any help?
Sent from my MB865 using XDA App
Ricparr said:
OK, I have no idea what I'm missing here. When I plug the HDMI cable into the phone, nothing happens. TV stays black and I get no prompt on the phone. What am I missing here? The cable is brand new, Andy phone is not rooted. I'm running go launcher and go locker. Any help?
Sent from my MB865 using XDA App
Click to expand...
Click to collapse
Is it a motorola hdmi cable?
No, it's a rocketfish. I wondered I ft that would matter. Are HDMI cables not standardized yet?
Sent from my MB865 using XDA App
Ricparr said:
No, it's a rocketfish. I wondered I ft that would matter. Are HDMI cables not standardized yet?
Sent from my MB865 using XDA App
Click to expand...
Click to collapse
I had lots of problems with the original atrix and atrix 2 using non moto hdmi.
Brand new Mediabridge HDMI cable attached to Win7 Dell laptop not working
shanghei said:
I had lots of problems with the original atrix and atrix 2 using non moto hdmi.
Click to expand...
Click to collapse
Recently I order a brand new MediaBridge HDMI cable from Amazon from a friend for use in India in a sealed box & it did not work when I attached it to the phone & my Dell laptop. What could be the reason? Is there any symbol supposed to pop up on the phone or the laptop & on hindsight I just got thinking (gave the cable back now) in case if no symbol is supposed to pop up would directly playing a video on the phone while the hdmi cable is attached make it play on the laptop??
Don't want to be a smartass or anything but I hope you're selecting HDMI as the Source on your TV.
As I mentioned I tried on my Dell laptop running Win 7....is there anything specific I needed to do besides just connecting either ends between the phone & the laptop to get the HDMI working?
RAD7 said:
As I mentioned I tried on my Dell laptop running Win 7....is there anything specific I needed to do besides just connecting either ends between the phone & the laptop to get the HDMI working?
Click to expand...
Click to collapse
I'm sure it the HDMI Micro to HDMI connection from phome to laptop will not work. Laptop HDMI should only be an output, not an input. It will work from phone to a monitor or tv. Once connected you will be prompted to make a choice on the A2 for a display mode.
I bought a Dynex cable from BB that works fine with the Atrix 2 when connected to a monitor or tv.
HTCuser111 said:
I'm sure it the HDMI Micro to HDMI connection from phome to laptop will not work. Laptop HDMI should only be an output, not an input. It will work from phone to a monitor or tv. Once connected you will be prompted to make a choice on the A2 for a display mode.
I bought a Dynex cable from BB that works fine with the Atrix 2 when connected to a monitor or tv.
Click to expand...
Click to collapse
Thanks. Yes you are right it is a micro hdmi (phone) to regular HDMI port on the Laptop. DAYMN..they should specify to unsuspecting users like me. IMHO many people would not be aware about this.
Hi guys, a friend of mine have and old Samsung android based phone.
I was thinking about give it a better use as an android tv box/media player, but I have a few questions, main concerning USB OTG.
I could use a USB OTG Y cable, so I could charge the phone while using it, and still have the OTG... could I connect an USB hub to the OTG so I could use a USB mini keyboard and a mouse?.
My other problem is the micro usb port and the HDMI conection to the TV. I could use a cable to connect the phone to the TV but then I couldn't connect the USB OTG. It's possible to connect HDMI and still use USB OTG???
skyx26 said:
Hi guys, a friend of mine have and old Samsung android based phone.
I was thinking about give it a better use as an android tv box/media player, but I have a few questions, main concerning USB OTG.
I could use a USB OTG Y cable, so I could charge the phone while using it, and still have the OTG... could I connect an USB hub to the OTG so I could use a USB mini keyboard and a mouse?.
My other problem is the micro usb port and the HDMI conection to the TV. I could use a cable to connect the phone to the TV but then I couldn't connect the USB OTG. It's possible to connect HDMI and still use USB OTG???
Click to expand...
Click to collapse
It's probably cheaper to just buy a chromecast.
janekmuric said:
It's probably cheaper to just buy a chromecast.
Click to expand...
Click to collapse
I live on latin america. A chromecast is way more expensive than a bunch of cables.
skyx26 said:
I live on latin america. A chromecast is way more expensive than a bunch of cables.
Click to expand...
Click to collapse
Well... just so you know you can't have the phone charging and in OTG mode in the same time. Not even with adapters. This is because the current in USB can't flow in both directions in the same time (because there aren't enough dedicated wires)
janekmuric said:
Well... just so you know you can't have the phone charging and in OTG mode in the same time. Not even with adapters. This is because the current in USB can't flow in both directions in the same time (because there aren't enough dedicated wires)
Click to expand...
Click to collapse
Damn... that pretty much end the subject.
Thank you.
Please suggest a work around as soon as possible!
Have you tried OTG cable? https://www.amazon.co.uk/Type-C-Adapter-Female-Cable-Black/dp/B00VWA2JNI
Also you can try something wireless with phone holder https://www.gearbest.com/game-contr...cpzXIDEvrSeEaM1Jt0ucI6rOnxMN5TRRoCPcsQAvD_BwE
sergeymetallic said:
Have you tried OTG cable? https://www.amazon.co.uk/Type-C-Adapter-Female-Cable-Black/dp/B00VWA2JNI
Also you can try something wireless with phone holder https://www.gearbest.com/game-contr...cpzXIDEvrSeEaM1Jt0ucI6rOnxMN5TRRoCPcsQAvD_BwE
Click to expand...
Click to collapse
hi thanks for the reply otg works with pendrive and keyboard and mouse but not with usb game controller. can you confirm wireless game controller works with htc u11? is there any lag?
its ok 2.4 ghz wireless gamepads work but why wont usb wired controllers work?