[Q] samsung galaxy tab 2 10.1 (p5100) cant flash anything!!! - Galaxy Tab 2 Q&A, Help & Troubleshooting

hi,
Recently i've updated p5100 to omnirom kitkat and i have CWM touch recovery. And also my device is not rooted.
out of the blues, my tab started auto rebooting itself. so i decided to do a factory reset to it. But i noticed nothing changed. the tab looked exactly the same. so i decided to flash a new rom (slimkat) to it. and i did. i followed the typical flashing technique through the sdcard. I cleared data, cleared partition, dalvik cache. and also flashed the new rom. but when i boot it, it remained the same old omnirom kitkat.
I did it a few times and got my tab stuck on bootload (omnirom) . i just dont get why CWM is not factory reseting the device or accepting any new rom. i even tried flashing TWRP. but no luck! so as a conclusion, my p5100 cant accept any new rom or recovery image and it cant factory reset. stuck on boot animation! but i could flash in the AROMA filemanager to it... would seriously appreciate if anyone could help me with this problem.
Thanks in advance.

Related

Help Bricked. Tablet is resetting during recovery

I have the wifi only 7310 model of the 8.9
Overcme CwM Recovery 5.1.2.6
ROM was Galaxian Soup AOSP 1.6
My tablet resets during recovery. Half through a data wipe ROM install ROM backup or ROM restore it will reset and reboot.
It first happened when i booted into recovery and triedROM issue. to make a back up of m y current ROM and attempt to flash the aokp one. It reset during the backup process.
It shouldn't be a ROM issue. My tablet did this once before, it would reset when i did anything involvng dataon an Overcome ROM i think. Data wipe/backup etc. I left it alone while the ROM still worked and tried again a week later with no issues.
Any ideas? Now i have a soft brick that cant boot past the Samsung Screen. I can get into recovery and download modes.
I am so sorry, i posted this in the wrong forums, can a moderate please close this thread?
Yup, thread closed. Hope you figure out your problem.

[Q] Note 10.1 Wifi Automatically boots into Recovery

So I tried to install Android Revolution HD 9.0 today, and after installation, I got stuck in a boot loop. Then I tried factory resets and cache partion wipes and multiple reinstalls and now it automatically boots into recovery.
Prior, I had a stock ROM, but it was rooted, but I was plagued with issuse such as random reboots and half the time on reboot, it would be stuck in a boot loop.
Can anyone help me out here?
I'm still fairly new to android modding beyond following instructions for installing CWM/Custom ROMs, so take that into consideration.
Factory reset or wipe phone in CWM and flash a new stock rom via Odin .
jje
Done and done. Thanks for the help!

Tried to inställning CM - stuck at boot (n8020)

Hi. Yesterday I succesdfully rooted my n8020 (galaxy note 10.1 LTE Swedish). Tho, when I tried to flash Sbiddens modded CM version, it failed. I wiped data/facto ry reset from CWM, wiped cache and Dalvik. Flashed CM and Gapps. Rebooted, only to get stuck at the blue-ring Cyanogenmod boot screen. Tried to redo all the steps in different orders, no succcess. Stillvstuck at boot.
Then came the puzzling part. I downloaded the original firmware from sammobile.com, and flashed it via Odin. It succeeded, bit whenbit booted in back to the standard rom, all my applications and all the data was intact! As I sevetal times wiped data/factory reset, I assumed thatevwrything would be gonw and that I'd have to install everythingnfrom scratch. Am I correct in assuming this, and may this be related to CM getting stuck at boot? Any hel greatly appreciated!
vargfloejt said:
Hi. Yesterday I succesdfully rooted my n8020 (galaxy note 10.1 LTE Swedish). Tho, when I tried to flash Sbiddens modded CM version, it failed. I wiped data/facto ry reset from CWM, wiped cache and Dalvik. Flashed CM and Gapps. Rebooted, only to get stuck at the blue-ring Cyanogenmod boot screen. Tried to redo all the steps in different orders, no succcess. Stillvstuck at boot.
Then came the puzzling part. I downloaded the original firmware from sammobile.com, and flashed it via Odin. It succeeded, bit whenbit booted in back to the standard rom, all my applications and all the data was intact! As I sevetal times wiped data/factory reset, I assumed thatevwrything would be gonw and that I'd have to install everythingnfrom scratch. Am I correct in assuming this, and may this be related to CM getting stuck at boot? Any hel greatly appreciated!
Click to expand...
Click to collapse
Bump
vargfloejt said:
Bump
Click to expand...
Click to collapse
I have seen something similar when I installed Cyanogenmod on a kindle fire, I had to do a factory reset after restoring back to stock firmware.
I would suggest that you try doing a factory reset after restoring factory firmware on your GNote.
Success with Philz recovery
Had the same problem loading onto my N8020.
In the end I used a different recovery and it worked first go.
Try using Phils recovery http://forum.xda-developers.com/showthread.php?t=2202714

Galaxy tab 2 10.1 5113 in boot loop

My galaxy tab was rooted and i Just installed clock work mod recovery and i tried to flash a custom ROM that was proven to work and now its stuck in a boot loop were i just see the galaxy tab logo on start up, then it shuts off. I have tried at least 5 different roms with no success. Does anyone know a fix to this? One of the roms was a aosp ROM and it got the furthest. it got past the galaxy tab logo and to its android loading logo, but it froze and restarted. This is really frustrating and i would just like a fix. anyone?
Thanks,
Zach
supertzag said:
My galaxy tab was rooted and i Just installed clock work mod recovery and i tried to flash a custom ROM that was proven to work and now its stuck in a boot loop were i just see the galaxy tab logo on start up, then it shuts off. I have tried at least 5 different roms with no success. Does anyone know a fix to this? One of the roms was a aosp ROM and it got the furthest. it got past the galaxy tab logo and to its android loading logo, but it froze and restarted. This is really frustrating and i would just like a fix. anyone?
Thanks,
Zach
Click to expand...
Click to collapse
my brother almost rom for proper functionality before flashing requires you to wipe cache and factory reset and dalvik cache wipe
i think you did not perform it
also as now you are on boot loop if you are able to boot into recovery you can try to do these things it may work or you may boot in rom
also if not possible you can then flash stock rom through odin
also after flashing stock rom you will stuck o samsng logo so dont panic and reboot into recovery and wipe factory reset and cache partiiton and reboot { just these two things }
hope i helped and you tab gets working again :good::good:
aditya rathee said:
my brother almost rom for proper functionality before flashing requires you to wipe cache and factory reset and dalvik cache wipe
i think you did not perform it
also as now you are on boot loop if you are able to boot into recovery you can try to do these things it may work or you may boot in rom
also if not possible you can then flash stock rom through odin
also after flashing stock rom you will stuck o samsng logo so dont panic and reboot into recovery and wipe factory reset and cache partiiton and reboot { just these two things }
hope i helped and you tab gets working again :good::good:
Click to expand...
Click to collapse
Hi, I whenever i perform a factory reset and device wipe, it restarts the tablet. Im not exactly sure how to flash a ROM through odin, I have used it tho.
Also, all the links to my tablets (p5113) roms are broken. Do you know of any working ones?
Thanks,
Zach:laugh:
For P5113 you can use P5110 Rom´s - IR included to support P5113
For KitKat-Roms you need to use one of the latest recovery´s - else you´ll get "Error 7".
And don´t forget
"format /system" before flashing too
Android-Andi said:
For P5113 you can use P5110 Rom´s - IR included to support P5113
For KitKat-Roms you need to use one of the latest recovery´s - else you´ll get "Error 7".
And don´t forget
"format /system" before flashing too
Click to expand...
Click to collapse
Am i suppose to format the system in CWM? whenever i do this, the tablet shuts off.
Is that suppose to happen?
Thanks,
Zach
Android-Andi said:
For P5113 you can use P5110 Rom´s - IR included to support P5113
For KitKat-Roms you need to use one of the latest recovery´s - else you´ll get "Error 7".
And don´t forget
"format /system" before flashing too
Click to expand...
Click to collapse
Sorry if I'm intruding (I own the P5100) I have the same problem of bootloop, I've done the reset (also the / system) but as soon as I install the latest nightly of CM 11 7 gives me this error (Error 7), what should I do?
All of this has happened to me for a simple update to version
ilMartiniano said:
Sorry if I'm intruding (I own the P5100) I have the same problem of bootloop, I've done the reset (also the / system) but as soon as I install the latest nightly of CM 11 7 gives me this error (Error 7), what should I do?
All of this has happened to me for a simple update to version
Click to expand...
Click to collapse
Error 7 means your recovery needs to be updated. Look at Android-Andi's signature, he has links to proper recoveries.
njstein said:
Error 7 means your recovery needs to be updated. Look at Android-Andi's signature, he has links to proper recoveries.
Click to expand...
Click to collapse
Thanks, Problem solved
Help
Hello, I have been trying to work with formating data and stuff but whenever i do cwm crashes so i tried switching to TWRP and it also crashes when trying todo anything with storage.
Any fixes?
I just want some type of android back on my tablet.
Disregard above. I am now able to format and install roms but whenever i reboot it goes back into TWRP. Any ideas why?
Thanks,
Zach
What device do you own?
Wipe Data factory reset
wipe cache
wipe dalvic cache
format /system
flash rom
reboot

[Q] Bricked S3

I have flashed roms many times and never had a problem. This time, i was going from the newest M release of Cyanogenmod to Cleanmod. While clearing my dalvik cache, I accidentally hit some bootloader option (CWM Touch). Then after I finished flashing, it wouldn't boot into cleanrom, it just stuck on the Samsung screen. I tried reflashing CM but that freezes too at the Cyanogenmod screen. Now I cant get into CWM recovery or Odin. I can get to these screens but as soon as I get there, the phone reboots on it's own. Is there anything I can do to recover the phone? I've been searching all day but I can't find anything that suits me since I can power on the phone just can't really get into the recovery console or Odin.

Categories

Resources