Hi there,
I can't get lollipop to run on my lg e975. The installation works fine but the setup wizard always stops.
For the same problem on other phones some guys suggest that it's because your using the wrong gapps or that you have to format system before installing a custom rom but in my case none of these two hints worked.
I've trieded seven different lollipop gapps (including the 20141119 signed gapps that some guys recommended) and i have tried installing cm12 and mokee with and without formatting system before the installation.
The error is some null pointer java.lang.Object
I had installed the official kitkat firmware with towelroot and freegee and i have tried twrp and cwm recovery. Nothing worked. How can i solve this problem?
Hi
Thanks for writing to us at XDA Assist. It's most likely incompatible gapps causing your problem. The gapps that were recommended to you are quite old, perhaps try Banks gapps (I can't provide external links but if you search for Banks gapps in Google it should come up as the first result). Another thing to note, you should always perform a full wipe before flashing a new ROM, a full wipe consists of system, data, cache, and dalvik cache. If you're not doing this, that could be another reason for your issue.
No response in two days, thread closed.
Related
I have a Moto G 2013 Edition XT1032 Single Sim (not LTG or 2014). I previously had C-ROM perfectly running on the device, but wanted to try some other roms. In the process, I deleted everything, but got it running again with the stock firmware I needed to install the new rom I want, so it worked out., but not fully. After installing it (the rom was the OneRom, the OnePlus One experience), the audio was messing everything up and decided to go and remove it by wiping the device and than installing the CM11 most recent nightly rom (11/12/14) and it worked fine and I was happy, until I rebooted and than found "Unfortunately, the process com.android.systemui has stopped". This one little message is truly frustrating me, because everyone has fixes, but none of them work for me!
(/+ = with and without)
I've tried:
-Factory Reset
-Factory Reset, Wipe Cache, Wipe Dalvik Cache
-Tried Fix Permissions on TWRP
-Tried CWM (sorry if I can't remember the version).
-Re-Installing CM-11
-Tried Installing CM-11 Unofficial M9 and M11.
-Tried Installing EHNDROIX_V_14.10.14/ + Ehndroixgapps 4.4.4 20141011
-Tried Installing DU_falcon_4.4.4_20140821 v.7.9 (Dirty Unicorn)/ + Gapps 4.4.4
-Tried Installing C-ROM
-Tried doing what I previously did and wiping the device to stock 4.3 from Telus and trying everything again.
Fixes that didn't work:
Changing Run-time from ART to Dalvik (I don't have Flipboard and when I went to change it while the error continuously appeared, it said it was already on Dalvik)
Deleting Xposed (I never had it)
Going to SystemUI and clearing Cache (clearing cache option was not available)
...guys, I tried everything I could find by myself, but they either don't apply to me or they don't work. I need help. The reason I typed out the thread was because, even though there are threads on the subject, none of them work or apply to the situation. I don't have the apps, the Runtime is on Dalvik, I tried different versions, I tried to wipe and re-install, tried different recoveries, and I tried everything else I could find. Nothing worked. I need help!!!
correction: I found that wiping the phone and installing C-Rom with gapps works fine for now. I just really would like to use CM-11 and other ones like it without the SystemUI stopping. It's only with the following roms I've tried when I've seen the problem :
-CM-11 Nightly_11-12-14 and Unofficial M9 and M11.
-EHNDROIX_V_14.10.14/ + Ehndroixgapps 4.4.4 20141011
-DU_falcon_4.4.4_20140821 v.7.9 (Dirty Unicorn)/ + Gapps 4.4.4
C-Rom is the only one working right now without crashing, but I just came from the rom and I don't want to go back. If there's any way I could get any of the CM-11'S working or ENDROIX working, it would be heaven. Someone please help me!
I need to send my Nexus 6 in for a warranty replacement so I need to run my GS3 for a few days. It's been a while since I've used my GS3 so I wanted to get it all up-to-date first. I went and downloaded the latest nightly of CM12.1 and the "stock" TK Gapps.
I did a clean flash (factory reset, format system, flash ROM, flash Gapps) and when it boots up I get constant "______ has stopped" messages from all the google stuff. After I press "OK" as fast as I can for a minute I can get to the home screen, where I can see that all of the google app icons just show the little android guy (indicating it's not installed) and when I select any of them it tells me that the app is not installed.
I tried clearing cache and dalvik and that didn't work. I tried re-flashing from scratch and that didn't work. I tried the pico TK Gapps and that didn't work. I tried the stock and pico Open Gapps and that didn't work. I don't know what I'm doing wrong, but no matter what I try the result is always the same.
One time, just as a sanity check, I flashed just the ROM and no Gapps and that worked fine. Not sure what that tells me but just something to note.
Please help.
I was also forced to do a clean flash of CM 12.1 + gapps recently. This gapps file worked for me: highonandroid.com/download-android-5-1-lollipop-gapps/ (I can't post a link since I'm new).
One issue: apparently it requires flashing with a recent version of TWRP recovery. Doing it with CWN or a old TWRP will return an error. Hope this helps.
Hello.
Recently I returned my HTC Sensation XE arranged, and seeing that it had no guarantee I decided to root it. After two days in which I almost lost the mobile after having bricked, I finally managed to unlock the bootloader (although I'm still S-ON), install the latest version of 4ext Recovery Touch and give root permissions.
What happens is that looking for an Android Lollipop ROM I saw there was only one type of ROMs developed by Ivanich, and others called UnoROMs but at the end also belonged to Ivanich. Both unofficial version of CyanogenMod 12.1.
Overall, I started to download and install CM12.1 ROM with GApps and entering in recovery, but nothing was installed. I deleted cache, dalvik, data and reset to factory, but all attempts were in vain. Or almost.
When I realized that something was wrong, I looked in the ZIP of the ROM, I entered in the "/system" folder and presto!: no sign of apps, data, or other things that I think should be to make it work, only was the 'build.prop'.
Finally I gave up and tried to install Ivanich's CM11 with the corresponding GApps, and everything was great (although WIFI, that is unusable). It turns out that this ROM itself had all the appropriate files in the '/system' folder.
I thought then that Ivanich's CM12.1 ROM would be an update of his CM11 ROM and I tried to install it with CM11 as the system at that time, and I got it, but it starts out a sign saying that I had no data on the phone and to make it work I need to reset to factory. I did it and nothing happened. The recovery remained caught in the process of reseting to factory. And so over and over again. At the end I reinstalled CM11 and tried to repeat the installation process of CM12 this time making an erased of dalvik, data, cache and factory reset (which I not did at the previous), but it didn't installed, and 5.1 GApps either. As usual.
Currently I have CM11 by Ivanich (KitKat 4.4.4) with GApps, but I can't use the phone because WIFI practically doesn't work. There is a ZIP to fix WIFI that I flashed and that was fine, but it didn't fix anything.
Please can someone explain to me why I can't install CM12.1 and 5.1 GApps and why this ROM has the '/system' folder empty. There are people that have been able to install this ROM, and I can't understand how they have succeeded.
Thanks to all who help me in advance.
Newbie here.
Background: I have my Samsung Note 10.1 GT-N8000 since 2012, but I haven't touched it for 2+ years because it was still on Android 4.1. (Last week Netflix announced that we could watch it offline with Android 4.4 up, so I eventually had the courage to do sth about my 10.1)
My problems:
I was using TWRP 2.4, flashed CM13 ROM and Gapps pico. It went well except all Google apps weren't installed properly:
- If I just flashed the CM13 ROM without Gapps, upon reboot it kept popping "Unfortunately Google Play etc stopped"
- If I flashed both, it was the same, plus all Google apps were labelled "com.Android" instead.
I searched for and tried all possible solutions, and in one old threat someone suggested TWRP version matters too. So I updated it to TWRP 2.8 (also tried 3.0). Now, I have a different set of problems. I can't flash in TWRP 2.8 the same ROM that I could flash with TWRP 2.4, and it keeps giving the "error executing updater binary in zip" I've tried it million times (literally fighting it for the past 18 hours...)
I've tried the followings: wiping system/ cache before flashing new ROM, starting the entire process, rooting it again etc.
Could anyone kindly chip in? Any suggestions are appreciated!!!
Try Philz Recovery .
Nonono...don't try Philz recovery. Use the recovery explicitly stated in the CM13 instructions (TWRP 2.8.7.0) or newer (I'm using 3.0.2.0). Do not use any recovery that the instructions say is not supported, which is everything else.
rudycreat said:
My problems:
I was using TWRP 2.4, flashed CM13 ROM and Gapps pico. It went well except all Google apps weren't installed properly:
...
I've tried the followings: wiping system/ cache before flashing new ROM, starting the entire process, rooting it again etc.
Click to expand...
Click to collapse
Given this and the apparent lack of following CM13 installation instructions (you didn't wipe everything), I'd suggest starting over with downloading/flashing the TWRP version on the CM13 downloads page and re-downloading CM13 and and Open GApps check MD5s. Maybe a standard Open GApps install would be a good idea; you can always uninstall what you don't want.
Not meaning to sound harsh but preferable to spending another 18 hours in Einstellung. (pun not intended)
Hi people,
I've been struggling with this for the past 2 days and I'm trying really hard not to give up
I downloaded the stable rom from the MIUI website (for Mi Note 3 aka jason), installed it successfully via MiFlash, and tried flashing Lineage after I did a factory + data + system + cache wipe. It ended with me getting the dreaded error 7.
A bit later, I realized I had to get the dev build from the MIUI website and flash it before flashing Lineage OS. So I did - I updated to MIUI 10 using the dev build, made sure it was working and tried flashing Lineage OS on top of it (after wiping the partitions I mentioned earlier, following the Lineage OS instructions).
So eventually I got it to work - sort of.
Lineage OS is booting properly, but the device freezes before it can find any wifi networks to connect to (and then reboots), and that's why I think the culprit is the modem.
So, a few questions -
1. did it happen to anyone else? I searched endlessly but came up with nothing
2. If it is a modem issue - where can I find a working one? I looked it up and found nothing
3. If it isn't a modem issue - what should I do?
If I'm doing anything wrong - please tell me. I'm flashing custom roms since 2011 and this is the first time something like this has happened to me.
Thanks for all your help!
Hi, first of all you need an unencrypted phone - Format data in TWRP (3.2.3.1), then wipe system, data, cache, dalvik. Flash the Miui 10 china stable firmware 10.0.2 or 10.0.4, then rom, gapps and reboot.
Good luck, zaqm
zaqm said:
Hi, first of all you need an unencrypted phone - Format data in TWRP (3.2.3.1), then wipe system, data, cache, dalvik. Flash the Miui 10 china stable firmware 10.0.2 or 10.0.4, then rom, gapps and reboot.
Good luck, zaqm
Click to expand...
Click to collapse
You're a true lifesaver. Worked on the first try.
Thank you!
No problems ?