Hi, I'm Mikel and I'm a noob in this forum. I'm from Spain but I can talk English.
I have been looking in different forums and websites (Official Elephone forums... HTCmania...) but I can't find the solution.
I have an Elephone P6000, but it doesn't have any SO, because the system partition seems to be wiped. I have TWRP custom recovery installed and I can access it, but I can't install any ROM because says that an error has occurred.
I have been looking in some sites and it seems I have to use SP Flash Tool, but I can't get a solution. For using SP FT I need the necessary drivers (MT65xx driver) and there are properly installed. When I press the "download" button in SE FT, it appears "BROM ERROR". This is a common error, but the solutions I found didn't work.
I tried to:
- Enter the meta mode (Volume+ and connect the mobile phone to the PC) [With and without battery] [[This solved an issue, connecting and disconnecting issue]]
- Press the download button in SP FT and then plug the Elephone to the PC (but nothing happens! The download doesn't start!) [Drivers are installed] I have tried in 2 PCs, one of them with Win 8.1 and the other one with Win 7 (32 bits)
I hope you can help me!
Thanks
Hi there,
I'm sorry but I can't find anything related to your question/device except this threads where you can ask directly:
Elephone presents the new P6000 model, MTK 6732 Quad-Core 1.5G, MALI T760
Elephone P6000 mtk6732 64bit Recovery & SP Flash Tool
Or post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Related
hello, i am having a problem with my tablet name : penta ws1001q
the problem is that it stuck at the manufacturer i can only access the recovery mode.
I made a factory data reset and format cache but this has not solved my problem.
So i have have downloaded its driver on the manufacturer website and i have download drivers(it include sp flash tool, an the tabs image) for my tablets the problem is that i don't know how to use them.
I am asking you if you can give me a clear explanation on how to install this driver to my tablet and also how to use sp flash tool and get my tab in the download mode. I have already try using adb command but it did not work the tab just boot and stuck at manufacturer logo.
Please help me.
Hi,
I can't find anything relevant on XDA related to your device so please ask for more help here :
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
My phone was ok. I installed cwm recovery by mtk dorid tool. But , I wanted to install TWRP recovery by a pc software- during installation a warning message appeared and I clicked ok (something formatted – I did not remember). Then I lost my mobile network signal, null imei and null baseband. Then I install N9500_MTK6589_Miui_Revolution_4.5.23_Cwm via CWM recovery (2 times, but system closed automatically. But, third time after installation phone totally bricked ). Basically phone starts with startup sound, but with crushing screen. I was able to connect mtk dorid tool and it says Model: N9500- null baseband-null imei, then I tried to Install CWM recovery. Then phone totally bricked without starting. I tried everything from google to solve. Then I was able to firmware upgrade – stock rom (Only one time). Now, stock rom is not downloading. I used all sp flash tools. All the times one error appears –Brom Error: S_FT_Enable_DARM_Fail (4032).
Please anyone help me. (My Pc Detect My Phone as preloader usb vcom port, I am using windows 8.1 64 bit, no issue with driver software and sp flash tool. Is it any problem with my Motherboard.)
Hi there,
I'm sorry but I can't find anything related to your question/device because we don't have any forum/thread with development for this device.
Please post that in the forum bellow for more answers from the experts. Register an account on XDA for that.
> General discussion > Questions and Answers or > Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
I found that my phone is blocked and won’t connect through fastboot. I went to GSM service 2 days ago and they told me that my phone is blocked (after two days of working on it)
What can I do do unblock it or just flash OTHER rom/RECOVERY?
I cannot execute fastboot commands (win 7 x32, x64, WIN XP – waiting for device), adb works fine.
When I try to install other ROM or gaaps (which i don’t have right now) it says verification failed.
I tried to use recovery tool but it is using fastboot.
Is there a way to wipe all data from the phone and install it from the very beginning or where can I ask or search?
Guys from GSM service told me that my bootloader is locked or something like that
Is there a way without fastboot??
Can I flash mulitlang ROM without fastboot?
PLEASE HELP
(i dont even have gaaps)
Hi there,
I'm sorry but I can't find anything relevant to your question/device except this thread where you can ask: [UNBRICK] ZTE V5 Red Bull V9180 2GB RAM, 8GB ROM
Please post that in the forum bellow for more answers from the experts but first register an account on XDA forum:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
hi,
i've (or had) a Zopo ZP999 with mt6595 Soc...after a firmware update my radio lost signal, then i tried to flash my device
despitly he got bricked, i explain
when i open the SP flashtool 5.13 (version certified for 6595), select scatter file and can download all sub-items, disconnect/reconnect phone, flash starts
- DA passed
- BL passed
- then start then system download...after 7% the download stop without error
i redo, now it stops after 33%, another time afetr 22%
i checked preloader is installed corectly
anyone an idea?
Zopodroid said:
hi,
i've (or had) a Zopo ZP999 with mt6595 Soc...after a firmware update my radio lost signal, then i tried to flash my device
despitly he got bricked, i explain
when i open the SP flashtool 5.13 (version certified for 6595), select scatter file and can download all sub-items, disconnect/reconnect phone, flash starts
- DA passed
- BL passed
- then start then system download...after 7% the download stop without error
i redo, now it stops after 33%, another time afetr 22%
i checked preloader is installed corectly
anyone an idea?
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
There is no forum specifically for the Zopo ZP999 but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help where members familiar with your device might be able to advise you. Since your device is not widely used, please be patient and give the experts plenty of time to respond.
Good Luck!
[solved]
hi,
found solution
I uninstall/reinstall vcom driver and changed usb cable...flash OK....phone alive again
can be closed
Hi all
3 days ago I got my Umi eMax mini and after just one day it wouldn't boot. It can enter emergency download mode (edm), but no recovery or fastboot. It was running default rom and only some apps and settings were changed on the phone.
When I enter edm the computer registers as a Qualcomm HS-USB QDLoader 9008 and I can see it in QFil and alike, but not with ADB and Fastboot.
Does anyone have any ideas as how to flash something like TWRP/CWM or just default rom so I can get the phone working again?
If you need any more info I'll do my best to get it.
Thanks in advance...
Thank you for using XDA Assist!
I got this answer from @joel.maxuel where he answered a similar question (from you maybe?) in this thread.
Some devices (Like Samsung), don't have an accessible fastboot - putting preference on download mode instead. But I haven't seen any bad consequences of trying to access fastboot when it's inaccessible.
I would suggest going to this thread to ask (can copy and paste), your device experts can be found there:
> Android Development and Hacking > Android General > UMI EMAX MINI 64bit Octa Core FHD 4G Smartphone
Hope this helps, and good luck!