[Completed] Zte v9180 redbull problem - XDA Assist

I found that my phone is blocked and won’t connect through fastboot. I went to GSM service 2 days ago and they told me that my phone is blocked (after two days of working on it)
What can I do do unblock it or just flash OTHER rom/RECOVERY?
I cannot execute fastboot commands (win 7 x32, x64, WIN XP – waiting for device), adb works fine.
When I try to install other ROM or gaaps (which i don’t have right now) it says verification failed.
I tried to use recovery tool but it is using fastboot.
Is there a way to wipe all data from the phone and install it from the very beginning or where can I ask or search?
Guys from GSM service told me that my bootloader is locked or something like that
Is there a way without fastboot??
Can I flash mulitlang ROM without fastboot?
PLEASE HELP
(i dont even have gaaps)

Hi there,
I'm sorry but I can't find anything relevant to your question/device except this thread where you can ask: [UNBRICK] ZTE V5 Red Bull V9180 2GB RAM, 8GB ROM
Please post that in the forum bellow for more answers from the experts but first register an account on XDA forum:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

Related

[Completed] How i install preloader on MTK 6589 bricked phone?

My phone was ok. I installed cwm recovery by mtk dorid tool. But , I wanted to install TWRP recovery by a pc software- during installation a warning message appeared and I clicked ok (something formatted – I did not remember). Then I lost my mobile network signal, null imei and null baseband. Then I install N9500_MTK6589_Miui_Revolution_4.5.23_Cwm via CWM recovery (2 times, but system closed automatically. But, third time after installation phone totally bricked ). Basically phone starts with startup sound, but with crushing screen. I was able to connect mtk dorid tool and it says Model: N9500- null baseband-null imei, then I tried to Install CWM recovery. Then phone totally bricked without starting. I tried everything from google to solve. Then I was able to firmware upgrade – stock rom (Only one time). Now, stock rom is not downloading. I used all sp flash tools. All the times one error appears –Brom Error: S_FT_Enable_DARM_Fail (4032).
Please anyone help me. (My Pc Detect My Phone as preloader usb vcom port, I am using windows 8.1 64 bit, no issue with driver software and sp flash tool. Is it any problem with my Motherboard.)
Hi there,
I'm sorry but I can't find anything related to your question/device because we don't have any forum/thread with development for this device.
Please post that in the forum bellow for more answers from the experts. Register an account on XDA for that.
> General discussion > Questions and Answers or > Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] [q] help [urgent]

i know there have been a lot of posts regarding the fix of the "Android phone cant connect to pc", and i have tried almost all methods. but still didnt got any working solution. i am using windows 8 x64 and i am stuck in a bootloop after restarting my nexus 4. also the phone is not recognized by my pc. its always detected as an unknown device. then i tried to wipe the system and again install a fresh rom but pc wont recognize it as adb device. i installed latest google usb drivers from device manager and android sdk. i have twrp recovery. i tried adb sideload but it isnt working . please help !!! my phone is DEAD!!
Hi,
It would be best to ask the experts who own your device for help in this dedicated help thread in your device section,
> Google Nexus 4 > Nexus 4 Q&A, Help & Troubleshooting > [HELP THREAD] nexus4 Ask any question.
Good luck!
Thank you Darth... But i managed to work it out... I did the system restore because of which in device manger its recognized as android bootloader interface. And then using nexus root toolkit I managed to transfer cm12 nightly and gapps... now its running superb
Awesome! ?
Thread closed

[Completed] Help 111 i brick my prestigio 5300.cant install drivers

Bricked PAP5300DUO
tHE PHONE IS VIBRATING. i CAN ENTER IN RECOVERY MODE.. The PC make a sound but the fastboot,Odin & other programs cant see my phone. i INSTALLED ALL KIND OF DRIVERS BUT .... i USED PIMP MY ROM BUT I MADE A MISTAKE TO USE OTHER SIMILAR APP AFTER THAT AND AFTER REBOOT DIED. I WIPE THE CHECHE & TRIED FACTORY RESET BUT AT THE END FAILS AND SAYS ...DATA/APP IS MISSING. i TRIED RESTORE TITANIUM BACKUP FILE BUT DOESNT HELPED. PLEASE HELP !!!
I USED THE SUGGESTED METHOD BUT IT SAYS <WAITING FOR DEVICE>
THE LAST I MADE BACKUP/RECOVERY WITH MY OLD BACKUP BUT STILL NOTHING. I KNOW NOW I MUST DO SOMETHING FROM PC BUT DRIVERS ARE PROBLEM.
PLEASE try to help me. Im new to all this ****.
Hi there,
I'm sorry but I can't find anything related to your question.
Please post that in the forum bellow for more answers from the experts but first register an account on XDA forums:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] [Q] Bricked Motorola XT389

I have rooted a Motorola XT389 to uninstall some application systems. After this I removed administrator privileges and I stopped the device. I have started in recovery mode, and wiped data / cache. On rebooting it stuck at loading OS and then it resets from the beginning (bootloop).
1) RSD Lite and other programs do not work because the PC does not recognize the phone when it is off or in recovery mode .
2) The possible operation would be if I had a backup of entire sistem.
Hi there,
I'm sorry but I can't find anything related to your question/device except this thread where you can ask as well: Motorola Motosmart XT389 ROOT Success!!!
Please post that in the forum bellow if don't receive any answer:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] Bricked Umi eMax mini

Hi all
3 days ago I got my Umi eMax mini and after just one day it wouldn't boot. It can enter emergency download mode (edm), but no recovery or fastboot. It was running default rom and only some apps and settings were changed on the phone.
When I enter edm the computer registers as a Qualcomm HS-USB QDLoader 9008 and I can see it in QFil and alike, but not with ADB and Fastboot.
Does anyone have any ideas as how to flash something like TWRP/CWM or just default rom so I can get the phone working again?
If you need any more info I'll do my best to get it.
Thanks in advance...
Thank you for using XDA Assist!
I got this answer from @joel.maxuel where he answered a similar question (from you maybe?) in this thread.
Some devices (Like Samsung), don't have an accessible fastboot - putting preference on download mode instead. But I haven't seen any bad consequences of trying to access fastboot when it's inaccessible.
I would suggest going to this thread to ask (can copy and paste), your device experts can be found there:
> Android Development and Hacking > Android General > UMI EMAX MINI 64bit Octa Core FHD 4G Smartphone
Hope this helps, and good luck!

Categories

Resources