Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
THIS RECOVERY WILL TRIP YOUR KNOX COUNTER ..AND UR WARRANTY WILL BE VOID
THIS RECOVERY IS ONLY FOR THE 3G VARIANT (g900H) RUNNING LOLLIPOP and kitkat( thanks to YMatrix for confirming )
BASEBAND used :g900hhxxu1boad
Why CWM ? Why not a pre-rooted firmware which will not void warranty?
Ans : CWM has many more functionality than stock recovery ! Rooting means to playing around with your device.If some thing goes wrong it you have to flash the whole firmware again instead,backup your ROM through CWM and if something goes wrong restore your backup AS SIMPLE AS THAT !
All you have to do is follow my instructions :
STEP 1 :
-Download and setup ADB drivers for your device
can be found here Drivers !
STEP 2 :
-Download the recovery from ---> Link
-Download odin 3 Link
-Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see s5 logo
-Press vol up to confirm
STEP 3 :
-Now that you are in odin mode connect your device via usb cable !
-Now open Odin3 3.09 that you have downloaded.
-If there is a pop-up like Installing ADB drivers let it get finished it is usually updates !!!!
-Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it
MAKE SURE U UNTICK THE AUTO-REBOOT BUTTON
-Click Start
ONCE IT SAYS PASS ...REMOVE THE BATTERY ...THEN RE-INSERT THE BATTERY AND BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON
HOW TO ROOT THE DEVICE :
-Download SuperSu (obviously the latest one) from here ------> Click here !
-Copy that to internal sd card
-Power off your device and press vol up + power + home button (all at once)
-Select install zip from sdcard --->choose zip from sdcard ---> scroll down and flash UPDATE-SuperSU-v2.xx.zip
Done ! And you are ready to go
BUGS
YOU TELL ME [/SIZE]
SOURCES
DEVICE TREE
KERNEL(PREBUILT ... THANX TO SAMSUNG ... AVAILABLE IN THE DEVICE TREE)
CREDITS
koush for cwm
@RIPPER for testing and giving me the recovery image ... A Big thanks to him !
@codekidX for the thread template
RESERVED
Thank you so much RVR.. we all were waiting for this.
Thanks for using my template RVR
rly good job
lets see if we will see also aosp or cm on our model
Airboner said:
rly good job
lets see if we will see also aosp or cm on our model
Click to expand...
Click to collapse
Coming soon...
Sent from my SM-G900H using XDA Free mobile app
@RVR it seems that your custom recovery doesnt have option ''install from sd'' or internal..
it has only
reboot system
apply data
wipe data/factory reset/
wipe cache partition
wipe media
reboot to bootloader
power down
view recovery logs
so proably have u forgotten to add it (?)
Airboner said:
@RVR it seems that your custom recovery doesnt have option ''install from sd'' or internal..
it has only
reboot system
apply data
wipe data/factory reset/
wipe cache partition
wipe media
reboot to bootloader
power down
view recovery logs
so proably have u forgotten to add it (?)
Click to expand...
Click to collapse
I think you are still on stock recovery .. Did you untick the auto reboot button ?? then remove the battery after it said reset in odin ,..and then boot straight into recovery?
@RVR i only removed battery as u write..u havent metioned to untick auto reboot or i havent seen..
btw i will try to untick in a few minutes
Airboner said:
@RVR i only removed battery as u write..u havent metioned to untick auto reboot or i havent seen..
btw i will try to untick in a few minutes
Click to expand...
Click to collapse
yes i have , in the guide ..step 3
ok my fault..btw i unticked auto reboot,and when it showed pass i removed battery,but nothing still the same,,probably something i dont do right
Airboner said:
ok my fault..btw i unticked auto reboot,and when it showed pass i removed battery,but nothing still the same,,probably something i dont do right
Click to expand...
Click to collapse
DId you boot straight into recovery after removing and re-inserting the battery?? Are you on lollipop??
RVR said:
DId you boot straight into recovery after removing and re-inserting the battery?? Are you on lollipop??
Click to expand...
Click to collapse
yes i booted straightly into recovery.
yes lollipop 5.0 rooted
dude maybe i do something wrong
i´m afraid the same happened to me, just basic custom recovery options. It wasn´t the stock recovery thoug.
What did you mean by "coming soon" ?, you meant a CM rom ????
regards
Anhell said:
i´m afraid the same happened to me, just basic custom recovery options. It wasn´t the stock recovery thoug.
What did you mean by "coming soon" ?, you meant a CM rom ????
regards
Click to expand...
Click to collapse
Can you get Me a screenshot?? And what are the options in apply data?
Airboner said:
yes i booted straightly into recovery.
yes lollipop 5.0 rooted
dude maybe i do something wrong
Click to expand...
Click to collapse
There is something called apply updates in @RVR recovery...lol. Use that!
You have to go there and flash zips. :good:
Anhell said:
i´m afraid the same happened to me, just basic custom recovery options. It wasn´t the stock recovery thoug.
What did you mean by "coming soon" ?, you meant a CM rom ????
regards
Click to expand...
Click to collapse
This is not a touch recovery .. Maybe that's why you feel its not custom ....
I will make philz and twrp soon
Airboner said:
yes i booted straightly into recovery.
yes lollipop 5.0 rooted
dude maybe i do something wrong
Click to expand...
Click to collapse
Great to see some work on the G900H! :victory:
Why did you say that this recovery is only for the LP firmware? Doesn't recovery work globally on all firmwares? Will it work on KK?
Does this recovery support external SD card?
Keep up the good work! :good:
YMatrix said:
Great to see some work on the G900H! :victory:
Why did you say that this recovery is only for the LP firmware? Doesn't recovery work globally on all firmwares? Will it work on KK?
Does this recovery support external SD card?
Keep up the good work! :good:
Click to expand...
Click to collapse
It does support the external sd card
This recovery was built on the lollipop recovery image ,., I'm not really sure whether it can be flashed in the kitkat version .. You can surely give it a try !
RVR said:
It does support the external sd card
This recovery was built on the lollipop recovery image ,., I'm not really sure whether it can be flashed in the kitkat version .. You can surely give it a try !
Click to expand...
Click to collapse
Thanks for your quick reply!
I checked it out, it works like a charm (I am running on KK), including external SD card, though I didn't try to install anything...
Maybe I didn't find the sub-menu but where is the backup option? Or you haven't implemented it yet?
Related
I rooted my phone with SuperOneClick and that went well, when ahead and installed ROM Manager from the Market and flashed the CWM (T-Mobile version).
Then I was going to boot into recovery mode so I shut down and hit POWER + DOWN, did that, now my phone is stuck in ODIN MODE with the android logo and a message saying "Downloading...do not turn off target"
Under ODIN Mode
Product Name: SGH-I727R
Custom Binary Download: NO
Current Binary: Samsung Official
Any help?!
K so how did the phone get into dload mode and if there is no usb connected to it than just take out battery and power back ur phone again.
nutsngum said:
I rooted my phone with SuperOneClick and that went well, when ahead and installed ROM Manager from the Market and flashed the CWM (T-Mobile version).
Then I was going to boot into recovery mode so I shut down and hit POWER + DOWN, did that, now my phone is stuck in ODIN MODE with the android logo and a message saying "Downloading...do not turn off target"
Under ODIN Mode
Product Name: SGH-I727R
Custom Binary Download: NO
Current Binary: Samsung Official
Any help?!
Click to expand...
Click to collapse
Phew okay still works!
After I hit 'Flash CWM Recovery' in ROM Manager, do I need to reboot in recovery mode with ODIN? Any instructions to do so?
NO just hit flash in cwm in rom manager and let it flash in cwm and than do this to install rom.
appdroid said:
1Download rom.
2put it in sd card
3go to cwm
4clear data/factory reset 3 times
5clear cache 3 times
6wipe dalvik.
7Install Rom...
8.Reboot system now
9. Setup Your gmail (and Wifi if necessary)
10.Reboot to Clockwork
11.Install update and any other mod at this time
12.clear dalvik cache and cache partition
13. Reboot system now
14.Open Rom Manager and run Fix Permissions
15. Reboot When Complete .. and Wahlah
Ice Cream Nother Fu**ing Sandwich
Click to expand...
Click to collapse
nutsngum said:
Phew okay still works!
After I hit 'Flash CWM Recovery' in ROM Manager, do I need to reboot in recovery mode with ODIN? Any instructions to do so?
Click to expand...
Click to collapse
Do I not need to do this step first before I can install ROMs?
http://forum.xda-developers.com/showpost.php?p=21011261&postcount=5
no that will put u back stock and u will lose root.
nutsngum said:
Do I not need to do this step first before I can install ROMs?
http://forum.xda-developers.com/showpost.php?p=21011261&postcount=5
Click to expand...
Click to collapse
Ahhh got it - ok will back up then try to flash
When you say "Go to CWM" how do I do that exactly? Same with clearing the data/cache/dalvik?
Open up rom manager and select second option reboot into recovery. and there will be options in cwm about clearing data/cache and under advance you can clear dalvik.
nutsngum said:
When you say "Go to CWM" how do I do that exactly? Same with clearing the data/cache/dalvik?
Click to expand...
Click to collapse
Thanks! And when you install the add ones for the ICS, is it just the APKs that you need to put on your SD?
depends if its apk than you can install it regularly and if its .zip file you have to flash it through cwm. IT will say by file if its cwm flash able or apk. By the way you must be topped out on ur thanx rite haha cauz i don't see any.
Just wanted to know if this was ur first android. I am sure it is.
nutsngum said:
Thanks! And when you install the add ones for the ICS, is it just the APKs that you need to put on your SD?
Click to expand...
Click to collapse
appdroid said:
depends if its apk than you can install it regularly and if its .zip file you have to flash it through cwm. IT will say by file if its cwm flash able or apk. By the way you must be topped out on ur thanx rite haha cauz i don't see any.
Just wanted to know if this was ur first android. I am sure it is.
Click to expand...
Click to collapse
I have been thanking each one of your posts actually so maybe I am maxed out!
It is my first droid, came over from the Blackberry world
Oh man you have to learn a lot because there is nothing at all for blackberry that you can do. By the way I hate that ****ty keyboard they have on almost every phone. They suck in my opinion but my friend likes it idk y. I came from apple where i had jailbroken iphone and always did **** on that phone too.
nutsngum said:
I have been thanking each one of your posts actually so maybe I am maxed out!
It is my first droid, came over from the Blackberry world
Click to expand...
Click to collapse
So I realize I did something stupid and I'm hoping I can fix it. I was in the process of rooting and installing a new ROM on my brothers phone. I made it S-off, and I didn't want clockwork recovery so I just skipped that. I updated the firmware so I can put an ICS ROM on it and now it's stuck in a bootloop I would imagine because there is no recovery on there. Can I fix this somehow? How do I install a Recovery when I don't have a recovery?
Thanks
smockpuv said:
So I realize I did something stupid and I'm hoping I can fix it. I was in the process of rooting and installing a new ROM on my brothers phone. I made it S-off, and I didn't want clockwork recovery so I just skipped that. I updated the firmware so I can put an ICS ROM on it and now it's stuck in a bootloop I would imagine because there is no recovery on there. Can I fix this somehow? How do I install a Recovery when I don't have a recovery?
Thanks
Click to expand...
Click to collapse
you can install recovery from bootloader/fastboot and then rom from the recovery
here follow the post #2 from this guide to do that
What about download mode aka odin mode
Filip98 said:
What about download mode aka odin mode
Click to expand...
Click to collapse
download mode is not required for HTC phones.. we can flash stuff from bootloader
to go to bootloader
power off phone then remove battery ,reinsert it ..then hold power + volume down button ..will take you to bootloader ..there you can flash the recovery ..and a lot
ganeshp said:
you can install recovery from bootloader/fastboot and then rom from the recovery
here follow the post #2 from this guide to do that
Click to expand...
Click to collapse
So I downloaded the pg58img file and put it on the root of my SD card. went into bootloader and it saw the file but for some reason didn't give me the option to install anything. Any idea why or what I did wrong?
smockpuv said:
So I downloaded the pg58img file and put it on the root of my SD card. went into bootloader and it saw the file but for some reason didn't give me the option to install anything. Any idea why or what I did wrong?
Click to expand...
Click to collapse
try the other methods to install recovery
try using an RUU for your device.. thats how i fixed mine
serio22 said:
try using an RUU for your device.. thats how i fixed mine
Click to expand...
Click to collapse
No. RUU is a last option.
This is way too simple for that.
smockpuv said:
So I realize I did something stupid and I'm hoping I can fix it. I was in the process of rooting and installing a new ROM on my brothers phone. I made it S-off, and I didn't want clockwork recovery so I just skipped that. I updated the firmware so I can put an ICS ROM on it and now it's stuck in a bootloop I would imagine because there is no recovery on there. Can I fix this somehow? How do I install a Recovery when I don't have a recovery?
Thanks
Click to expand...
Click to collapse
Just need to flash a recovery; preferably 4ext. (only step 2 from this guide: http://forum.xda-developers.com/showthread.php?p=25587345)
Then nandroid backup from recovery (main menu of 4ext > Backup | Restore > Backup)
Then put an ICS ROM on SD Card using the Toggle USB Storage" option (main menu of 4ext > Toggle USB Storage)
Then format all partitions except SD Card from recovery (main menu of 4ext > Format | Wipe > Format all partitions (except SD Card) )
Then flash the ICS ROM from the recovery (main menu of 4ext > Install zip > Choose zip from SD Card).
Simple as that.
im getting hopeless now my phone wont boot up .... only stay in this screen.... and every time when i try to install from zip it wont..
am i missing any thing im very new to android...
here is the picture
hey buddy, can you give us more info aside from the pictures you attached so we can help you better and easier.. some info like, what u did before it happened, or what state ur phone have been before it happened, something you installed, etc.
cheers,
:cyclops:
ibaz said:
hey buddy, can you give us more info aside from the pictures you attached so we can help you better and easier.. some info like, what u did before it happened, or what state ur phone have been before it happened, something you installed, etc.
cheers,
:cyclops:
Click to expand...
Click to collapse
can any one see the picture at all??? because i cant ....
ok well now the phone is pretty much got stuck at the firmware screen as show in the picture...it got stuck like this after i install it with oldin
and when i choose install from zip my first choice is REMICS-I9003-V1.5 second is I9003XXKPE both wont install... it will just abort...after few second...
i have no idea what i have done totally new to this just dont want to paid local phone shop 50$ usd just to root it so try it my self
not sure what went wrong im a bit confuse with how to use oldin so maybe that the problem i saw there is PIT bootloader PDA phone and CSC...
not sure what to put
so at pit i uselatona 20110114.pit downloaded from XDA link
and PDA i use CM9 ALPHA8 GT I9003 PDA
that all i know...oh crap...
so, im a bit confused of your statement that you cant boot your phone. if what you mean is the two parts in the right side of your screenshot then that is the recovery mode. but if you mean that you cant boot and your phone is stuck in the boot logo or in the boot animation you are somehow in bootloop but we still could fix it.
ok, so could you enter even just in download mode (Volume down key + home key + power button) so we could try to flash a fresh rom so as to solve your issues? sorry i cant tell u immediately step by step solutions, im a bit confused with ur statements. hehe
note:
if you are confused with odin read first (there are posts here with instructions, hehe) before you start installing files with it, you dont want to get a bricked phone.
cheers buddy, and waiting for ur reply
ibaz said:
so, im a bit confused of your statement that you cant boot your phone. if what you mean is the two parts in the right side of your screenshot then that is the recovery mode. but if you mean that you cant boot and your phone is stuck in the boot logo or in the boot animation you are somehow in bootloop but we still could fix it.
ok, so could you enter even just in download mode (Volume down key + home key + power button) so we could try to flash a fresh rom so as to solve your issues? sorry i cant tell u immediately step by step solutions, im a bit confused with ur statements. hehe
note:
if you are confused with odin read first (there are posts here with instructions, hehe) before you start installing files with it, you dont want to get a bricked phone.
cheers buddy, and waiting for ur reply
Click to expand...
Click to collapse
i can boot into recovery mode and download mode
some other guy helped me out im able to got my phone working again i make mistake on odin file
so now my problem is how can i ICS on it... or at least with touchwiz 4 or something
all i want to do is to install REMICS-I9003-V1.5
if all you ever wanted is to install remics 1.5, see this:
http://forum.xda-developers.com/showthread.php?t=1695175
note:
as always, a good clean flash may be recommended. meaning, clean flash of xxkpe, then to xxkpq/xxkpu before installing the rom u want to fix issues that pertain. to avoid confusion in using odin try this:
http://forum.xda-developers.com/showthread.php?t=1133787
cheers
ibaz said:
if all you ever wanted is to install remics 1.5, see this:
http://forum.xda-developers.com/showthread.php?t=1695175
note:
as always, a good clean flash may be recommended. meaning, clean flash of xxkpe, then to xxkpq/xxkpu before installing the rom u want to fix issues that pertain. to avoid confusion in using odin try this:
http://forum.xda-developers.com/showthread.php?t=1133787
cheers
Click to expand...
Click to collapse
i went to this page but i dont know the step to install this rom.
starcraft2010 said:
i went to this page but i dont know the step to install this rom.
Click to expand...
Click to collapse
Step by step
1. Do Nandroid backup
2. Do a factory reset/data wipe (of course you can try to install the ROM over other ICS roms)
4. Install the ROM
5. Reboot (automatically)
6. Wait till full boot of your phone
Note: Do not Format Data after the installation of ROM. Just wipe cache and dalvik cache!!
Click to expand...
Click to collapse
Step 1 means, go to cwm recovery menu and make a backup of current firmware
Step 2 wants to make sure there is no old data left that would give you errors. If you're on a stock firmware, make sure you do this, again from cwm recovery menu.
Step 3 is missing or maybe removed as it was irrelevent.
Step 4 .. you need to copy remics zip file to your sd card first. Then reboot to cwm recovery menu .. select install zip file from sdcard ... select zip file that you copied to sdcard.
After it install, go to advanced and reboot to recovery .. then clean wipe ... then go to advanced again and do a dalvik wipe.
Then reboot and Enjoy fingers-crossed
=========
To go to cwm recovery power off your device and reboot using “Volume Down + Home Key + Power Key" combination.
i think ur internal memory may be corrupted so if u r under warrranty flash any stock rom and take it to the service centre so if really it its internal memory is corrupted they will replace the motherboard if u r under warranty.
Hetalk said:
Step 1 means, go to cwm recovery menu and make a backup of current firmware
Step 2 wants to make sure there is no old data left that would give you errors. If you're on a stock firmware, make sure you do this, again from cwm recovery menu.
Step 3 is missing or maybe removed as it was irrelevent.
Step 4 .. you need to copy remics zip file to your sd card first. Then reboot to cwm recovery menu .. select install zip file from sdcard ... select zip file that you copied to sdcard.
After it install, go to advanced and reboot to recovery .. then clean wipe ... then go to advanced again and do a dalvik wipe.
Then reboot and Enjoy fingers-crossed
=========
To go to cwm recovery power off your device and reboot using “Volume Down + Home Key + Power Key" combination.
Click to expand...
Click to collapse
i got problem at step... 4 it will keep saying install abort ........ do i need to do special setup with oldin first
starcraft2010 said:
i got problem at step... 4 it will keep saying install abort ........ do i need to do special setup with oldin first
Click to expand...
Click to collapse
Hope you arent selecting "Install update.zip from sdcard". You should be able to select the desired zip file to install.
Hetalk said:
Hope you arent selecting "Install update.zip from sdcard". You should be able to select the desired zip file to install.
Click to expand...
Click to collapse
no im not... i need more help on step 4 LIKE HOW TO INSTALL CWM firmware on normal android..stuff like that...
starcraft2010 said:
im getting hopeless now my phone wont boot up .... only stay in this screen.... and every time when i try to install from zip it wont..
am i missing any thing im very new to android...
Click to expand...
Click to collapse
The best thing to do is to do a complete firmware flash.
1. XXKPE+LATONA.PIT (If this goes thru without any problem, then luck is on your side.)
2. Flash any latest GB firmware for your region.
3. Now flash the cfroot to get into recovery.
ganeshbiyer said:
The best thing to do is to do a complete firmware flash.
1. XXKPE+LATONA.PIT (If this goes thru without any problem, then luck is on your side.)
2. Flash any latest GB firmware for your region.
3. Now flash the cfroot to get into recovery.
Click to expand...
Click to collapse
ok and how do i do that? i have Odin now xxkpe and latona,pit
i have no idea what to do at this point so new to me...
2 flash latest GB firmare? where is it in exact?
3. what software do u flash the cfroot?
thanks alot ^_^
starcraft2010 said:
ok and how do i do that? i have Odin now xxkpe and latona,pit
i have no idea what to do at this point so new to me...
2 flash latest GB firmare? where is it in exact?
3. what software do u flash the cfroot?
thanks alot ^_^
Click to expand...
Click to collapse
Go to the folowing posts for downloading and flashing XXKPE.
http://androidadvices.com/making-galaxy-sl-i9003-xxkpe-update/4/#.UA0wh6CeaSw (Recommended)
http://forum.xda-developers.com/showthread.php?t=1004647
Flashing Cfroot to get Cwm recovery.
http://forum.xda-developers.com/showthread.php?p=19018861#post19018861
ganeshbiyer said:
Go to the folowing posts for downloading and flashing XXKPE.
http://androidadvices.com/making-galaxy-sl-i9003-xxkpe-update/4/#.UA0wh6CeaSw (Recommended)
http://forum.xda-developers.com/showthread.php?t=1004647
Flashing Cfroot to get Cwm recovery.
http://forum.xda-developers.com/showthread.php?p=19018861#post19018861
Click to expand...
Click to collapse
ok sound great i assume if every thing is done correct i should be able to install the RemICS v1.5 then wish me luck
thanks man
ganeshbiyer said:
Go to the folowing posts for downloading and flashing XXKPE.
http://androidadvices.com/making-galaxy-sl-i9003-xxkpe-update/4/#.UA0wh6CeaSw (Recommended)
http://forum.xda-developers.com/showthread.php?t=1004647
Flashing Cfroot to get Cwm recovery.
http://forum.xda-developers.com/showthread.php?p=19018861#post19018861
Click to expand...
Click to collapse
well now i got a working normal unrooted GB 2.3.4 if i want to root it what are my step? i got ext4 format thingy and when i try to install the ICS it said abort again...
I understand you got to xxxkpe ... did you boot your phone and it works fine?
If yes, as per ganeshbiyer's post above, you need to flash latest firmware for your region. If not sure, go for ddlf2, as it is very stable.
Once you flash that, usng odin, and phone works well, you need to root by flashing it's cf-root.
Once you do that and you can get into CWM recovery, it would be time for you to flash REMICS or CM9.
Hetalk said:
I understand you got to xxxkpe ... did you boot your phone and it works fine?
If yes, as per ganeshbiyer's post above, you need to flash latest firmware for your region. If not sure, go for ddlf2, as it is very stable.
Once you flash that, usng odin, and phone works well, you need to root by flashing it's cf-root.
Once you do that and you can get into CWM recovery, it would be time for you to flash REMICS or CM9.
Click to expand...
Click to collapse
YO IM ON REMIS ics now but the problem now is it russian... and i cant read russian lol
Hello Friend, I need your help too, I'm from Brazil and just upgraded my Galaxy Note N7000 for N7000XXLS2 ROOM 4.1.1, and I wonder if there is already proceeding to ROOT this room.
Remember that I downloaded from this site sammobile.com room. So what procedure should I follow to do or perform root this room? Thank you brother :: D
Root JRO03C.N7000XXLS2
JuniorLima said:
Hello Friend, I need your help too, I'm from Brazil and just upgraded my Galaxy Note N7000 for N7000XXLS2 ROOM 4.1.1, and I wonder if there is already proceeding to ROOT this room.
Remember that I downloaded from this site sammobile.com room. So what procedure should I follow to do or perform root this room? Thank you brother :: D
Click to expand...
Click to collapse
I've tried other root methods the whole afternoon, none of them work yet.
---------- Post added at 08:45 PM ---------- Previous post was at 08:40 PM ----------
toni_gon said:
I've tried other root methods the whole afternoon, none of them work yet.
Click to expand...
Click to collapse
Once ROM'd this cannot be reversed back to ICS. I used Odin to re-flash the ROM to get the SGN to reboot properly. Its fully functional again:fingers-crossed:.
toni_gon said:
I've tried other root methods the whole afternoon, none of them work yet.
---------- Post added at 08:45 PM ---------- Previous post was at 08:40 PM ----------
Once ROM'd this cannot be reversed back to ICS. I used Odin to re-flash the ROM to get the SGN to reboot properly. Its fully functional again:fingers-crossed:.
Click to expand...
Click to collapse
I managed to make the ROOT ... if you want to know how to do is just say that I post here
how can i do that? i am trying this about 2 days and i cannot root it
Sent from my GT-N7000 using xda premium
vasyno1 said:
how can i do that? i am trying this about 2 days and i cannot root it
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
just a minute, is that I'm from Brazil and I need to translate to English tutorial for you ok.
Ae ... you will like, it is not difficult the process is fully functional ... just a minute ..
[SIZE="<font><font>6</font></font>"][SIZE="<font><font>7</font></font>"]Performing the Root[/SIZE][/SIZE]
1-Have a micro SD card external memory and copy it to the file Philz Kernel 2.7. He will be key to your handset to work in step 7. Save it to a folder that starts with the letter A to be located more quickly (hint staff);
*
2-Download the Odin 3 v 1.87, unzip and run it. Now go to PDA and locate the file Kernel v5.3 GL Hydracore STD that you've already downloaded. Do not touch any other option Odin PC. Leave everything exactly as it is!
*
3-Turn off your phone (and make sure you have at least 80% battery charge);
*
4-Hold the Power + Home button + volume down to get into Download Mode / Odin Mode. Press the volume up and you're ready to install Kernel v5.3 GL Hydracore STD;
*
5-Connect your device to your computer using the USB cable. (WARNING! If your computer does not recognize your device, download and install Samsung Kies on your computer and then connect your device to have the drivers installed);
*
6-Once the ODIN PC indicate recognition of your device, click Start and NOT UNPLUG YOUR PHONE NO WAY! AVOID USING THE COMPUTER UNTIL THE INSTALLATION WAS DONE;
*
7-Wait for the device to restart. Probably he can not leave the home screen. Do not worry. Turn it off and remove the battery for 1 minute. For some reason I can not explain the GL Hydracore, even v7 is not working on Galaxy Note with Android 4.1.1 stock;
*
8-Now replace the battery and get into Clockworkmod (simultaneously press the Power + Home + Volume Up) and go to "Instal Zip from SD Card" and then "Chose External Zip from SD Card" and select the file Kernel Philz 2.7 CWM you downloaded and saved on your micro SD card. Select it and choose "yes" (Thanks to Junior Lima to discover that step tutorial)
*
8-Wait for the device to restart. Ready to Root and Clockworkmod device.
*
With this procedure you will increase the binary counter and get a yellow triangle every time you start your machine. Do not worry. Download the app Triangle Away v 2.10 and run it.
*
Okay, your system will be as an officer again.
can yoy give me the download links for files?
vasyno1 said:
can yoy give me the download links for files?
Click to expand...
Click to collapse
i used odin pda to install philZ-cwm6-xxls2-xjb-2.7.tar.md5 frm http://forum.xda-developers.com/showthread.php?t=1901191
later i copied Root_SuperSU0.95.Only-Signed to sd card i enteredrecovery mod and install zip from card
@ the end i installed triangle and everything went ok
have fun
rchaker said:
i used odin pda to install philZ-cwm6-xxls2-xjb-2.7.tar.md5 frm http://forum.xda-developers.com/showthread.php?t=1901191
later i copied Root_SuperSU0.95.Only-Signed to sd card i enteredrecovery mod and install zip from card
@ the end i installed triangle and everything went ok
have fun
Click to expand...
Click to collapse
Where did you get this process? I'd rather spend the Odin PDA KERNEL HYDRACORE life .... CWM then passes via the Kernel-PhilZ cwm6 ... was so I could do on my phone!!
Hydracore Kernel: http://forum.xda-developers.com/showthread.php?t=1749863 (V7 may be the same)
Kenel PhilZ-cwm6: http://205.196.121.32/yldwgfctn3vg/c114d2yobdvhyl4/PhilZ-cwm6-XXLS2-XJB-2.7-signed.zip
Running Wipe data factory / wipe cache / wipe dalvik after each flash
Triangle Away .... to remove triangle and binary counter ... (can be found in Google Apps)
has nothing to err .... hug
JuniorLima said:
Where did you get this process? I'd rather spend the Odin PDA KERNEL HYDRACORE life .... CWM then passes via the Kernel-PhilZ cwm6 ... was so I could do on my phone!!
Hydracore Kernel: http://forum.xda-developers.com/showthread.php?t=1749863 (V7 may be the same)
Kenel PhilZ-cwm6: http://205.196.121.32/yldwgfctn3vg/c114d2yobdvhyl4/PhilZ-cwm6-XXLS2-XJB-2.7-signed.zip
Running Wipe data factory / wipe cache / wipe dalvik after each flash
Triangle Away .... to remove triangle and binary counter ... (can be found in Google Apps)
has nothing to err .... hug
Click to expand...
Click to collapse
i ve done it on my n7000 and everything went ok
Strange results
JuniorLima said:
[SIZE="<font><font>6</font></font>"][SIZE="<font><font>7</font></font>"]Performing the Root[/SIZE][/SIZE]
1-Have a micro SD card external memory and copy it to the file Philz Kernel 2.7. He will be key to your handset to work in step 7. Save it to a folder that starts with the letter A to be located more quickly (hint staff);
*
2-Download the Odin 3 v 1.87, unzip and run it. Now go to PDA and locate the file Kernel v5.3 GL Hydracore STD that you've already downloaded. Do not touch any other option Odin PC. Leave everything exactly as it is!
*
3-Turn off your phone (and make sure you have at least 80% battery charge);
*
4-Hold the Power + Home button + volume down to get into Download Mode / Odin Mode. Press the volume up and you're ready to install Kernel v5.3 GL Hydracore STD;
*
5-Connect your device to your computer using the USB cable. (WARNING! If your computer does not recognize your device, download and install Samsung Kies on your computer and then connect your device to have the drivers installed);
*
6-Once the ODIN PC indicate recognition of your device, click Start and NOT UNPLUG YOUR PHONE NO WAY! AVOID USING THE COMPUTER UNTIL THE INSTALLATION WAS DONE;
*
7-Wait for the device to restart. Probably he can not leave the home screen. Do not worry. Turn it off and remove the battery for 1 minute. For some reason I can not explain the GL Hydracore, even v7 is not working on Galaxy Note with Android 4.1.1 stock;
*
8-Now replace the battery and get into Clockworkmod (simultaneously press the Power + Home + Volume Up) and go to "Instal Zip from SD Card" and then "Chose External Zip from SD Card" and select the file Kernel Philz 2.7 CWM you downloaded and saved on your micro SD card. Select it and choose "yes" (Thanks to Junior Lima to discover that step tutorial)
*
8-Wait for the device to restart. Ready to Root and Clockworkmod device.
*
With this procedure you will increase the binary counter and get a yellow triangle every time you start your machine. Do not worry. Download the app Triangle Away v 2.10 and run it.
*
Okay, your system will be as an officer again.
Click to expand...
Click to collapse
I had to use Odin to flash the Philz-cwm6-xxls-x2JB-2.7.tar file as it would not reboot after flashing hydracore. But the root was made with Super SU appearing in the apps drawer.
The second strange thing was no CWM recovery was installed, I had to get it from the play store and use the app to flash CWM.
But it's rooted now.
The next issue seems to be the Supernexus ROM from Faryaab, as it seems to have Build Prop issues.
A luta continua...
One question.
I do not understand the need to flash Hydracore.
Is it not possible to just flash Philz directly from stock recovery?
I understand correclty Phils has both CWM and root.
correct?
thanks
G
gflyer said:
One question.
I do not understand the need to flash Hydracore.
Is it not possible to just flash Philz directly from stock recovery?
I understand correclty Phils has both CWM and root.
correct?
thanks
G
Click to expand...
Click to collapse
I tried that and It did not work, Seems to me the leaked ROM has issues with other kernels.
toni_gon said:
I tried that and It did not work, Seems to me the leaked ROM has issues with other kernels.
Click to expand...
Click to collapse
I've compared the buildprop files of both ROMS, does anyone know what has to be edited out of the buildprop file of the JB rom to allow installation of the SuperNexus ROM?
Perhaps the Samsung hidden attribs?
toni_gon said:
I tried that and It did not work, Seems to me the leaked ROM has issues with other kernels.
Click to expand...
Click to collapse
is really this room is having trouble working with the Kernel's working with the other's room ... the only room that is working with XXLS2 as I know, is the PhilZ. Regarding Hydracore, friend, we passed this kernel first, to win the CWM machine understand? because from it as we flash the kernel PhilZ ...
gflyer said:
One question.
I do not understand the need to flash Hydracore.
Is it not possible to just flash Philz directly from stock recovery?
I understand correclty Phils has both CWM and root.
correct?
thanks
G
Click to expand...
Click to collapse
Me did not work so ... I had to spend the first kernel of Hydracore .... the more strange, is that after flashing the Kernel Hydracore, the device will not turn over ... it shows the screen with the name of N7000 and turn it off ... it will not start. Only after passing the kernel PhilZ the device connects. I can not understand why, but if anyone knows, feel free to tell us .... thanks!!
JuniorLima said:
Me did not work so ... I had to spend the first kernel of Hydracore .... the more strange, is that after flashing the Kernel Hydracore, the device will not turn over ... it shows the screen with the name of N7000 and turn it off ... it will not start. Only after passing the kernel PhilZ the device connects. I can not understand why, but if anyone knows, feel free to tell us .... thanks!!
Click to expand...
Click to collapse
I achieved root in the same way, but could not boot into CWM after installing Hydarcore, I used Odin to flash Philz, after flashing Hydracore. The only remaining issue is to install the custom ROM SuperNexus from Faryaab, I keep getting build prop errors.
I've tried modding the Faryaab buildprop to almost the same as the Sammy XXLS2 and I still have not achieved it...
Anyone have any ideas?
Could this help?
http://forum.xda-developers.com/showpost.php?p=34577056&postcount=2
rchaker said:
i ve done it on my n7000 and everything went ok
Click to expand...
Click to collapse
Got it ... then the two processes work perfectly ... because I ran the process described at the beginning of the post and it worked fine ... Now it's a matter of taste ... even more
full instructions
rchaker said:
i ve done it on my n7000 and everything went ok
Click to expand...
Click to collapse
hi... good day... im planning to root my Galaxy Note running on official XLS2 4.1.1
this is my first time to root my phone and i wanna be sure that im doing it properly...
Could you please give me a step by step instructions as to how to root my phone?
thanks ain advance... and i appreciate your help
Here is a full guide on how to root and install custom recovery on Galaxy Note 3 N900 Lollipop
(THIS WILL VOIDE WARRENTY,I AM NOT RESPONSIBLE FOR IF YOUR DEVICE BRICKED)
How to do root:
NOTE 1- MAKE SURE YOU DOWNLOAD THE FILE FOR YOU CORRECT ROOT FILES, THE FILES ARE DIFFERENT FOR 4.4.2 AND DIFFERENT FOR 5.0
NOTE 2- IF YOU KNOW YOU WANT TO FLASH A ROM THEN NO NEED TO ROOT YOUR DEVICE, SKIP THIS AND GO TO HOW TO INSTALL CUSTOM RECOVERY!
Step 1)Get the CF root file compatabile to your vairant from here.. http://forum.xda-developers.com/showthread.php?t=2466423
Step 2) Turn OFF your mobile and go to Download Mode by pressing and holding the Volume Down + Home Buttons together for few seconds followed by Power button then proceed with volume up.
Step 3) Now open ODIN on your PC and connect your Galaxy Note 3 to your computer.
Step 4) Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn blue (or yellow) and will show the COM port number.
Step 5) Click on pda in odin (if odin 3.09 choose AP) and choose the ".tar" file.
Step 6) Tick "Auto Reboot" and "F. Reset Time" options and make sure that "Re-Partition" is unchecked
!!!!DO NOT CHECK "Nand Erase All" IN ANY WAY!!!!
Step 7) Click on Start button in ODIN window to start the flashing process. The process will take few minutes to complete.
DO NOT UNPLUG USB CABLE WHILE EXECUTING THE PROCESS, YOU MAY BRICK YOUR PHONE!
Step 8) When the installation is completed, you read a "Reset " then a "Pass". your phone will restart
How To Install Custom Recovery
Download The Recovery Image You Want
For TWRP:
Download TWRP IMG From Here:
http://dl.twrp.me/ha3g/
(I dont have other recovery img links.. its your homework )
After downloading go to playstore and download :
Flashify: https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en
AFter Installing Flashify Open it and grant SuperSu Permission
Then Choose: Recovey Image
Then: Choose A File And browse the twrp.img file you downloaded and Select it and select yup..
It Will Flash TWRP For Your Phone
And Then Select Reboot.. It Will Reboot Into TWRP Recovery
ROCK AND ROLL NOW
Credits:
@CF-Auto-Root
@TWRP Recovery
not working for me,it starts for few second and then i get the message GAIL
shalilou said:
not working for me,it starts for few second and then i get the message GAIL
Click to expand...
Click to collapse
Which Note 3 You Have?
This Method Is Tested In Note N900 Indian Official 5.0
Is there root for Note 3 N900s available?
If you wanna root kitkat its available but if you want rootfor lollipop its not available now... may be out soon.. you can check yourself from cf root website.. only n900s kitkat available
Sent from my SM-N900 using XDA Free mobile app
tks for your detailed guide!
and there have another way to root your device:
1.download supersu.zip to your phone memory or sd card .
2.flash rec customed by odin
NO CHICK THE AOTUREBOOT! you can wait few secs after flash over
3 . Manual reboot (by volume up + home button and power )into rec and flash SU.zip
4.reboot and enjoying it !
Miaow93 said:
tks for your detailed guide!
and there have another way to root your device:
1.download supersu.zip to your phone memory or sd card .
2.flash rec customed by odin
NO CHICK THE AOTUREBOOT! you can wait few secs after flash over
3 . Manual reboot (by volume up + home button and power )into rec and flash SU.zip
4.reboot and enjoying it !
Click to expand...
Click to collapse
yep i tried it.. it didn't worked for me bro.. so i figured this one and it worked..
dhanmohan said:
yep i tried it.. it didn't worked for me bro.. so i figured this one and it worked..
Click to expand...
Click to collapse
as we know, phone will flash the rec failed if you select reboot button directly while flash the TWRP.rar though ODIN .
mostly rebooting into rec is still officials,.
so somebody flash it no select reboot , in that way ,we can flashed it successly by manually reboot after a few secs or more than ten secs,
i don't know why but it can be completed.
after that, we can flash su.zip as same as a rom.
i do not know what is your problem ,
forgiving my poor English and i try to describe what I mean clear。
i ll tell you what i know : )
PS:in china ,we use the CWM rec more time than TWRP
Miaow93 said:
as we know, phone will flash the rec failed if you select reboot button directly while flash the TWRP.rar though ODIN .
mostly rebooting into rec is still officials,.
so somebody flash it no select reboot , in that way ,we can flashed it successly by manually reboot after a few secs or more than ten secs,
i don't know why but it can be completed.
after that, we can flash su.zip as same as a rom.
i do not know what is your problem ,
forgiving my poor English and i try to describe what I mean clear。
i ll tell you what i know : )
PS:in china ,we use the CWM rec more time than TWRP
Click to expand...
Click to collapse
i tried to flash twrp through odin but its still stock recovery..didn't flashed twrp.. so i root through cf root and flashed twrp through flashify app and it worked... i use only twrp.. but you can try other Recovery's also.. but i didn't tried other Recovery's..
dhanmohan said:
i tried to flash twrp through odin but its still stock recovery..didn't flashed twrp.. so i root through cf root and flashed twrp through flashify app and it worked... i use only twrp.. but you can try other Recovery's also.. but i didn't tried other Recovery's..
Click to expand...
Click to collapse
Yep!
I just remembered something a few minutes ago.
the twrp can flashed success just in android 4.4 or 4.4's BL .
Forgive me waste your time.
my previous words without trial,:-[
if you want to try the cwm rec ,please tell me .
I can think of a way to share with you, that would be a bit different.
---------- Post added at 08:36 AM ---------- Previous post was at 08:21 AM ----------
dhanmohan said:
i tried to flash twrp through odin but its still stock recovery..didn't flashed twrp.. so i root through cf root and flashed twrp through flashify app and it worked... i use only twrp.. but you can try other Recovery's also.. but i didn't tried other Recovery's..
Click to expand...
Click to collapse
a little regret ,the new version cwm does not support English.
There is embarrassing for me ,
oh,god
Miaow93 said:
Yep!
I just remembered something a few minutes ago.
the twrp can flashed success just in android 4.4 or 4.4's BL .
Forgive me waste your time.
my previous words without trial,:-[
if you want to try the cwm rec ,please tell me .
I can think of a way to share with you, that would be a bit different.
---------- Post added at 08:36 AM ---------- Previous post was at 08:21 AM ----------
a little regret ,the new version cwm does not support English.
There is embarrassing for me ,
oh,god
Click to expand...
Click to collapse
ohh i don't know about cwm as i don't use them
While flashing recovery pl ensure usb debugging enabled in developpers option. For me flashing of recovery failed till i enabled usb debugging. This is my experience.
Skssha
Sent from my SM-N900 using XDA Free mobile app
skssha said:
While flashing recovery pl ensure usb debugging enabled in developpers option. For me flashing of recovery failed till i enabled usb debugging. This is my experience.
Skssha
Sent from my SM-N900 using XDA Free mobile app
Click to expand...
Click to collapse
you mean usb debugging should turn off while installing recovery!
Thanks. Finally flashed stock Lollipop Rogers ROM and have rooted and installed TWRP recovery.
Prolab said:
Thanks. Finally flashed stock Lollipop Rogers ROM and have rooted and installed TWRP recovery.
Click to expand...
Click to collapse
Just wondering, has your KNOX been triggered?
Individ3 said:
Just wondering, has your KNOX been triggered?
Click to expand...
Click to collapse
Yes rooting device will trigger Knox.. If you want to reset Knox there's a method in general section I guess.. Boot loader but its for kk.. If u flash it,it will cause bootloop can reset Knox then u have to flash stock and u r fully official
Individ3 said:
Just wondering, has your KNOX been triggered?
Click to expand...
Click to collapse
Yes, with this method.
help
Hi I have note 3 4G lte version
I want to root it can any one help me
I'm running lollipop
Mr_Za said:
Hi I have note 3 4G lte version
I want to root it can any one help me
I'm running lollipop
Click to expand...
Click to collapse
Just download cf root of your version and make sure that cf file is for lollipop of ur note 3 version and follow the process
Thank you I rooted my device successfully