TWRP RECOVERY - 2.8.4.0 Rev 2- XOLO Q3000 with OTG support
Procedure to follow
download the recovery.
then flash recovery using sptools /flashify /mobileuncle tool using these guides.
OR
if ur using any custom recovery from this thread then
visit this thread to get a flashable recovery which can be flashed from current recovery.
Just reboot to recovery for confirmation.
This is working recovery - tested by me.
flashed JB & KK rom.
Backup and restore without any issues.
OTG is also working properly - FAT/FAT32 formatted USB drives only.
As u all know our device has 6mb recovery partition size.
So while porting i need to trim the actual recovery.
U will not be able to partition ur sd card using this recovery.
Also u wont be able to root using this recovery.
For above issues we have better solutions.
Try and report.
For official change logs, see here:
http://teamw.in/project/twrp2
Credits:-
needrom for base recovery.
@z31s1g for TWRP themes.
OTG working normally.
You did it finally...
aaayush_singh said:
You did it finally...
Click to expand...
Click to collapse
Still doing some work on TWRP 2.8.5.0
Almost around 6.12 MB, it has at most tobe 5.99 MB.
Lets see.
avi3230 said:
Still doing some work on TWRP 2.8.5.0.....
Click to expand...
Click to collapse
is twrp v2.8.4.0 rev 2 flashable zip available only in dark theme? how to get the theme shown in the attached pic? will you be releasing other themed zips for twrp v2.8.4.0 rev 2?
m0han said:
is twrp v2.8.4.0 rev 2 flashable zip available only in dark theme? how to get the theme shown in the attached pic? will you be releasing other themed zips for twrp v2.8.4.0 rev 2?
Click to expand...
Click to collapse
Sir all themes working well. i just uploaded dark theme.
u can use rev 1 themes also on rev 2.
working on TWRP 2.8.5.0 so forgot to upload other themes.
u can download from here.
Eventually i increase the action message font and i forgot which ui.xml i used, still searching for it.
TWRP 2.8.5.0 booting but cant flash any ROM but recovery flash, wiping is working normally.
If u can help me with that i can try it.
Thanks.
I would love to see u pressed thanks button sometimes.
just wondering if the rev 2 recovery.img file can be placed inside your TWRP_2.8.2.0_Q3000 play.zip file replacing the twrp v2.8.2.0 recovery.img there.
will flashing that give twrp v2.8.4.0 rev 2 play theme? just a noob-guess! . btw, the ui.zip inside the dark theme zip file of twrp v2.8.4.0 rev 2 is pretty big (8,221,418 bytes).
---------- Post added at 12:57 PM ---------- Previous post was at 12:35 PM ----------
avi3230 said:
....all themes working well......u can download from here.
....i increase the action message font and i forgot which ui.xml i used, still searching for it......
....help me with that i can try it.....would love to see u pressed thanks button sometimes...
Click to expand...
Click to collapse
xolo q3k is not with me. i posted that i've changed my device. so, i don't think i can help you much.
but, when i see some solid work, i hope to get the xolo q3k for testing for a short period.
you know that i've lent you much positive-critical support. and i owe you a lot for helping me in toubled times.
please get that ui.xml and increase the action message font for this rev 2 as well as all your future releases. :good:
p.s.: i see you're doing great. recognised contributor! keep it up! :highfive:
btw, you seem to be in a rush to get to the next level.
waiting for response
m0han said:
....if the rev 2 recovery.img file can be placed inside your TWRP_2.8.2.0_Q3000 play.zip file replacing the twrp v2.8.2.0 recovery.img there.
will flashing that give twrp v2.8.4.0 rev 2 play theme?.... the ui.zip inside the dark theme zip file of twrp v2.8.4.0 rev 2 is ....8,221,418 bytes....
..please get that ui.xml and increase the action message font for this rev 2 as well as all your future releases......
Click to expand...
Click to collapse
@avi3230, expecting you to respond. i checked out your link; but, not sure how to use the template(?). suggest you upload the themed zips.
m0han said:
@avi3230, expecting you to respond. i checked out your link; but, not sure how to use the template(?). suggest you upload the themed zips.
Click to expand...
Click to collapse
Sir first flash the recovery with dark theme (flashble zip is attached so u can flash from any recovery)
Download play theme zip from above given link.
Rename this zip to ui.zip.
Now copy and replace in ur
Internal storage/twrp/theme/ folder.
Or replace in dark themed recovery.zip inside
Emmc/twrp/theme. Folder
In both cases u will find ui.zip already there u need to just replace.
I am in transit so cant upload now.
Wil upload after 9 pm only.
Thank you
Sorry for inconvinence.
m0han said:
@avi3230, expecting you to respond. i checked out your link; but, not sure how to use the template(?). suggest you upload the themed zips.
Click to expand...
Click to collapse
here r the flashble zips - also updated on thread of flashble zip
TWRP 2.8.4.0 Rev 2 -------2.8.4.0 rev 2 dark theme-------2.8.4.0 Rev 2 light theme-------2.8.4.0 Rev 2 Play theme
avi3230 said:
here r the flashble zips - also updated on thread of flashble zip.....2.8.4.0 Rev 2 Play theme
Click to expand...
Click to collapse
tried this, and boy, was i in for some shock! think i'll let the screenshots speak for themselves....
TWRP v2.8.4.0 Rev.1 (2) brought woes.
TWRP v2.8.2.0 brought back relief! :good:
mounting usb otg in TWRP v2.8.4.0 Rev.1 (2) is cumbersome. no way to get back to the previous screen after mounting, except by clicking the back key of the device. the back arrow at the top left does not work.
and i couldn't find the usb otg drive listed anywhere (as opposed to the case of TWRP v2.8.2.0, where you see it listed everywhere). others can try this recovery and correct me if i'm wrong.
more importantly, it'd help the dev do things better/properly. (although i took a screenshot it doesn't seem to have worked.) the device is back on 'twrp v2.8.2.0 play edition by avi3230'.
not sure when i can test further, but i'll be willing to help when possible. in the meantime avi3230 can concentrate on quality rather than quantity, imho. thanks, anyway.
@m0han
Yeah u r correct sir.
First its my mistake - as i used the zip of rev 1 and i replaced the zip and not the recovery in flashble zip so u see its rev 1.
U cant see some buttons cause the theme is meant for rev 2.
In each update of TWRP there is change in backup folder (which i cant define) so it wont detect previous backups.
u need to manually move the backup to respective folder when u upgrade.
Dont worry usb otg works properly in rev 2. u need to use back button to go back. I already made a video of that but not uploaded.
This happens because no one has even tested the recovery. There are more than 70 downloads of the img file but no one even reported.
Sorry for the inconvenience caused.
I am also learning by mistake, hope u understand what i am saying.
avi3230 said:
....u r correct.....no one has even tested the recovery. .....more than 70 downloads of the img file but no one even reported.....
Click to expand...
Click to collapse
that's sad. but, i think i know the reason - and i've stated it before. you're dishing out stuff (even partly cooked) in such quick succession that people can't even decide what to go with. i'm sure you yourself don't get time to test your work - you don't have the device with you full-time. and, frankly, the responses to your releases show that your users are not entirely satisfied. if you're keen to do a better/proper job, you may consider my advice suggestion in the proper spirit - "concentrate on quality rather than quantity". i notice that quite a few others have also opined so.
avi3230 said:
....As the number is more there bound to be the issue of repetitiveness and similarities.....
Click to expand...
Click to collapse
also, the issue of errors/bugs.....
lastly, just want to make a subtle observation: although i was the first among 70+users to give you a detailed feedback, which you found 'correct', you haven't 'thanks'ed me. i usually press thanks for work that has benefitted me as well as the user community for any device or some post that throws light on a matter of general/popular interest. so, continue your good work and the thanks will gush forth. just don't keep looking out for it. don't thank me just 'cos i said this; you know i'm not the kind who solicits thanks.
@m0han
Thanks for trying the recovery and pointing out the mistakes.
Links are corrected with proper recovery version.
I am just trying to learn things here nothing else so mistakes will happen from my side, i apologize for it.
I am just trying my level best.
The sad part is users only replay when they are not satisfied.
Right now i cant thank u cause my today's quota of thanks is already over.
avi3230 said:
.....Links are corrected with proper recovery version.....trying to learn things here....trying my level best.....
Click to expand...
Click to collapse
just go easy on releasing and hard on learning. forget thanking me. :good:.
a couple of suggestions:
1. provide md5 checksums. (i got d9e07dfe97cc26795f1f5f374df89ed0 for the latest one.) would help distinguish the various versions, esp. if there's no change of filename
2. please provide screenshots - at least the ones of the troublesome screens, if not exactly like mine.
"in each update of TWRP there is change in backup folder" - are backup location and usb implementation hard-coded in the recovery? i ask again what i asked here: what could happen if the (rev 2) recovery.img file is placed inside your TWRP_2.8.2.0_Q3000 play.zip file replacing the img file there and flashed? will that give me Q3000 backup folder and the usb otg implementation? . these are noob thoughts, but, i await your answer.
hi @avi3230, i've just sent you a pm. please respond. thanks.. posted in (common) recovery collection thread.
md5 mismatch
avi3230 said:
TWRP RECOVERY - 2.8.4.0 Rev 2- XOLO Q3000 with OTG support....
Click to expand...
Click to collapse
the 'TWRP 2.8.4.0 rev 2.img' from this op has md5 c5d180bc6cdde26541421a220e1a37d9.
the 'recovery.img' inside the '2.8.4.0 Rev 2 Play theme' linked to here has md5 c3b809c3081cd04b4a77446fe69db590.
there is a mismatch. which one is the proper fully-working 'TWRP 2.8.4.0 Rev 2'?
@avi3230 / somebody, please confirm which file (img or zip) to use to avoid troubles. thanks.
None of the two files have any trouble.
Using this recovery, it's working fine, thanks ?
Related
This is MIUI For the ONE S C2, It is based on bilal_liberty's CM10 Rom so expect similar performance and bugs. You will be running Android 4.1.2 With MIUI For Jelly Bean. It is currently not tested so make a full backup before you flash it, also do a logcat and post it if you can so we fix the issue if you have one.
Notice - This Rom has currently not been tested so use at your own risk, this is why it is labelled TEST.
Download - Soon
How To - To install this ROM just follow the usual way, Back up, Flash Rom, Clear Cache and everything and then boot.img.
V1.3 - Flashes, Boots but force closes and not stable, will release soon.
V1.2 - Re worked Port added, Not sure if issue has been fixed, you tell me.
V1.1 Test - Flashable .ZIP available but issues with flashing.
V1 Test - Launch
[removed]
clewis said:
Hmmm so there is already a miui rom....
But about my rom, i got an error on flash, it did start booting with the boot animation but got stuck.
Click to expand...
Click to collapse
use logcat to see whats going wrong
adb logcat > logcat.txt
http://forum.xda-developers.com/showthread.php?t=1726238 for more info
bilal_liberty said:
use logcat to see whats going wrong
adb logcat > logcat.txt
http://forum.xda-developers.com/showthread.php?t=1726238 for more info
Click to expand...
Click to collapse
I am doing a new build at this time i think i did something wrong the first time, so im going to add another unsigned file in a minute if you or someone else could make it a flashable zip and do a logcat when you do to save time would be good help, ill edit this page when it goes live on dropbox.
BTW this is how im trying to port it if anyone else wants a go - http://forum.xda-developers.com/showthread.php?t=1994503
For making flashable zip just select meta-inf folder system folder and boot.img and add them archieve, there is nothing extra to do.
bilal_liberty said:
For making flashable zip just select meta-inf folder system folder and boot.img and add them archieve, there is nothing extra to do.
Click to expand...
Click to collapse
Alright mate i have taken other one down and put a flashable zip on dropbox its going up now i can't try it myself as i dont have a usb cable that works to flash the boot.img so could someone else test it when it is uploaded.
clewis said:
Alright mate i have taken other one down and put a flashable zip on dropbox its going up now i can't try it myself as i dont have a usb cable that works to flash the boot.img so could someone else test it when it is uploaded.
Click to expand...
Click to collapse
Updated Flashable .Zip - https://www.dropbox.com/s/umsohpgmn1hh2z2/miui_unsigned.zip
Again use at your own risk, this has not been tested also everyone that does give it a try do a logcat so we can see if there is any problems.
Installation failed.
"set_perm: some changes failed"
"E:Error in /sdcard/miui_unsigned.zip"
work for old hboot??
DeanderDean said:
Installation failed.
"set_perm: some changes failed"
"E:Error in /sdcard/miui_unsigned.zip"
Click to expand...
Click to collapse
There is problem in updater script.try fixing permissions in updater script
u can use updater script from this to solve flash problems:
http://pan.baidu.com/share/link?shareid=341288&uk=4112589721 by jswei521
Great Work Man!!
Thanks for the port. I will test soon.
Sent from my HTC One S using xda app-developers app
bilal_liberty said:
u can use updater script from this to solve flash problems:
http://pan.baidu.com/share/link?shareid=341288&uk=4112589721 by jswei521
Click to expand...
Click to collapse
This rom from the above links works well, ive tried it.
Is old hboot 2.09 supported ?
can we flash this over 4.0.3 or do we need 4.0.4 as base ?
Paint in more detail information on ROM.
From what device port that was done, lay out screenshots, competently issue a post, write the detailed instruction. That works that doesn't work.
Thanks.
bilal_liberty said:
This rom from the above links works well, ive tried it.
Click to expand...
Click to collapse
Im getting an error?type=1 link when i go to that page, if you could attach the updater script so i could just switch them would be a big help.
Paint in more detail information on ROM.
From what device port that was done, lay out screenshots, competently issue a post, write the detailed instruction. That works that doesn't work.
Thanks.
Click to expand...
Click to collapse
Dont worry i will when i get it all up and running, its only a test version at this time. I have never made a ROM before and i have only published it this earlier because i need help in development which i am getting .
clewis said:
Im getting an error?type=1 link when i go to that page, if you could attach the updater script so i could just switch them would be a big help.
Dont worry i will when i get it all up and running, its only a test version at this time. I have never made a ROM before and i have only published it this earlier because i need help in development which i am getting .
Click to expand...
Click to collapse
Well, we wait for registration and the instruction, it will exclude many questions.
LeiManPRO said:
Well, we wait for registration and the instruction, it will exclude many questions.
Click to expand...
Click to collapse
I have registered and replied to a the original thread, got the download link and when i go to it i get an error, it's not there for me, if anyone has it please send the update script to me, i can't fix anything without that file.
clewis said:
Im getting an error?type=1 link when i go to that page, if you could attach the updater script so i could just switch them would be a big help.
Click to expand...
Click to collapse
Here u go best of luck
Edit: if you want some files from that rom here it is: http://www.mediafire.com/?mb04ljce767sd8m
bilal_liberty said:
Here u go best of luck
Edit: if you want some files from that rom here it is: http://www.mediafire.com/?mb04ljce767sd8m
Click to expand...
Click to collapse
Awesome mate, doing edits tonight will upload later.
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Asus Transformer Prime TF700T (tf700t)
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
Click to expand...
Click to collapse
Phil3759 said:
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Click to expand...
Click to collapse
Will give it a test run.
After using this on my phone, I'm excited to see this for my tablet as well. So far the only thing that I have found not working was the mounting the SD card through the recovery doesn't seem to work, it was connected to the computer when I mounted it but my computer couldn't see it. It also seems that the recovery is a bit slower on my tablet than on my phone, d2spr, though it might just be the tablet itself.
Frostbiter said:
After using this on my phone, I'm excited to see this for my tablet as well. So far the only thing that I have found not working was the mounting the SD card through the recovery doesn't seem to work, it was connected to the computer when I mounted it but my computer couldn't see it. It also seems that the recovery is a bit slower on my tablet than on my phone, d2spr, though it might just be the tablet itself.
Click to expand...
Click to collapse
mount usb storage relies on device tree, kernel and rc files
Without the device or repo maintainer fixing it, it is hard
Phil3759 said:
mount usb storage relies on device tree, kernel and rc files
Without the device or repo maintainer fixing it, it is hard
Click to expand...
Click to collapse
Ah okay, well so far that's the only bug in the recovery I noticed, and I wouldn't have even noticed it if I had remembered to put the kitkat gapps on my device before wiping it. Haha
Really nice job though, I'm glad you brought it over since I've had issues with plain cwm in the past and twrp doesn't seem to be getting updated at the moment I thank you for bringing this to my tablet.
Thank you so much for this nice tool and give us choices. I flashed it and the UI is just beautiful. Now I'll go test all its functions.
:good:
Nice
Nice recovery, It the best Ive ever come across. I Dev for CMB ROMS, I have made a flashable zip, so you can flash it from your current recovery.... I have this posted in the Download tab of my ROM forum... Its not my recovery, all credits will be given to Phil3759 It can be linked and given away as any open source recovery, I only say this on the ok of Phil3759, If he would like me to remove it, I will... Untill I here from him.. Here is a nice and easy way to install the best recovery to date for our beloved 700... Thx as always lj
lj50036 said:
Nice recovery, It the best Ive ever come across. I Dev for CMB ROMS, I have made a flashable zip, so you can flash it from your current recovery.... I have this posted in the Download tab of my ROM forum... Its not my recovery, all credits will be given to Phil3759 It can be linked and given away as any open source recovery, I only say this on the ok of Phil3759, If he would like me to remove it, I will... Untill I here from him.. Here is a nice and easy way to install the best recovery to date for our beloved 700... Thx as always lj
Click to expand...
Click to collapse
Just tried this out using your zip to install. Works great. Recovery is nice and easy to navigate. Thanks to Phil and LJ.
i feel a bit silly but the file in the tf700t download folder is a .img and i can't figure out how to flash it...
Thank you so much Philz!
I was dreaming about this, is not a joke, I've been using your amazing recovery in my jfltexx since always because it's the best.
I would be glad to help you.
Lord_Towers said:
i feel a bit silly but the file in the tf700t download folder is a .img and i can't figure out how to flash it...
Click to expand...
Click to collapse
Write this in the terminal:
su
dd if=/sdcard/download/philz_touch_6.08.9-tf700t.img of=/dev/block/mmcblk0p4
Reboot your tablet and that's it.
You could rename as you wish, also, I'm running CM 11 so the file directory might be different.
Or you can flash the zip that lj made.
Sent from my ASUS Transformer Pad TF700T using Tapatalk
soyusado said:
Write this in the terminal:
su
dd if=/sdcard/download/philz_touch_6.08.9-tf700t.img of=/dev/block/mmcblk0p4
Reboot your tablet and that's it.
You could rename as you wish, also, I'm running CM 11 so the file directory might be different.
Or you can flash the zip that lj made.
Sent from my ASUS Transformer Pad TF700T using Tapatalk
Click to expand...
Click to collapse
Thanks, i used the zip. I didn't even realize there were download tabs across the individual forums.
Lord_Towers said:
Thanks, i used the zip. I didn't even realize there were download tabs across the individual forums.
Click to expand...
Click to collapse
LOL, i remember when i discovered that too face palm.
Is Philz touch coming to a 701t Near you?
HI.... can someone explain how to get to the flashable version ? I don't understand what is meant by " I have this posted in the Download tab of my ROM forum "
Thanks
---------- Post added at 07:51 PM ---------- Previous post was at 07:29 PM ----------
Nevermind... I found it
SlappyWag said:
HI.... can someone explain how to get to the flashable version ? I don't understand what is meant by " I have this posted in the Download tab of my ROM forum "
Thanks
---------- Post added at 07:51 PM ---------- Previous post was at 07:29 PM ----------
Nevermind... I found it
Click to expand...
Click to collapse
Open Terminal Emulator and enter this command
su
dd if=/storage/sdcard0/download/philz_touch_6.19.3-tf700t.img of=/dev/block/mmcblk0p4
Link is dead !
Another link ?
bump
Anyone got another link to this please?
Updates at this thread have been stopped. Please check out Devs-Lab.com for all stuff that is/was/would be here. Links below are provided for reference, and will not be updated from now.
The Official Karbonn Titanium S5 Plus Thread :
Note : This is for the Karbonn Titanium S5 Plus / Coolpad 7295C Device and Development related to it and its clones only.
Click to expand...
Click to collapse
Original Karbonn ROM :
https://tr.im/20c3b
Click to expand...
Click to collapse
Stock ROM in a flashable Zip format :
http://karbonnroms.blogspot.in/2014/...um-s5plus.html
Click to expand...
Click to collapse
Here are the Custom Recoveries for this device :
Preferred, Tested : Philz Touch Recovery 6.57.9 ( based on ClockWorkMod Recovery v6.0.5.1 )
https://tr.im/2eae8
TWRP Recovery 2.7.1.0 ( Touch )
https://tr.im/1757c
ClockWorkMod recovery for Karbonn Titanium S5 Plus : ( Non - Touch )
tr.im/RWOT
ClockWorkMod - based recovery for Karbonn Titanium S5 Plus ( Modded by carliv @ xda )
tr.im/f2c21
Click to expand...
Click to collapse
Next, Here are the Custom ROMs
Click to expand...
Click to collapse
Sony Xperia Z:
https://www.dropbox.com/s/e8sq7s60de...nn_S5_Plus.zip
Note : The above mentioned link doesn't appear to work. If anybody finds this file link working, please add a post here and if possible, upload the file to Google Drive and Post the link here.
Click to expand...
Click to collapse
Sony Xperia Z v2:
https://tr.im/ca47d
Credits : Ajinkya Mishra
Mayank Girdhar
Click to expand...
Click to collapse
Miui v5 :
http://www.needrom.com/wp-content/up...37e511_4.2.zip
( to download this, you need to log in to needrom.com first )
Click to expand...
Click to collapse
Lewa OS:
https://tr.im/LewaOSforS5Plus
Click to expand...
Click to collapse
MIUI v6:
https://tr.im/MIUIv6forS5Plus
Click to expand...
Click to collapse
Samsung Galaxy Note 3-themed ROM :
http://karbonnroms.blogspot.in/2014/...um-s5plus.html
Click to expand...
Click to collapse
Stock Flashable ROM :
http://karbonnroms.blogspot.in/2014/...um-s5plus.html
Click to expand...
Click to collapse
Android Lollipop-themed ROM :
http://karbonnroms.blogspot.in/2014/...um-s5plus.html
Click to expand...
Click to collapse
Fly UI ROM :
https://www.dropbox.com/s/8q6ap1lnht...tfors5plus.zip
Click to expand...
Click to collapse
Samsung Galaxy S5-themed ROM :
http://www.4shared.com/zip/vP4RARWOba/XtremeS5.html?
Click to expand...
Click to collapse
Also visit these pages for more help...
https://www.facebook.com/karbonns5plus
https://www.facebook.com/karbonnroms
http://karbonnroms.blogspot.in
Click to expand...
Click to collapse
Note : The above posted links for ROMs are not tried and tested ! Be Careful !
For some of the ROM downloads, you need to log into the respective sites...
Thanks mainly to the thunderboys team and all other developers of the respective ROMs whom I haven't mentioned.
Click to expand...
Click to collapse
SystemUI.apk and SystemUI.odex files:
http://www.4shared.com/rar/cyMk4Dyub...lus_Syste.html
Click to expand...
Click to collapse
Steps for flashing a .img file to a specific partition ( here, recovery ) :
Here are the two methods :
1st Method ( Using ADB ) -- This needs the phone to be connected to the computer.
Go to the folder containing the recovery.img file you just downloaded.
Shift + Right Click on any empty space in the folder and Select Open Command Window Here
Connect the phone to the computer and make sure you have USB Debugging enabled and not USB Storage
Type these into the Command Window :
adb devices -- This should show the Device attached as KarbonnTitaniumS5Plus-xxxx or any such line.
adb get-state -- This is to ensure USB Debugging works. It will show device, recovery or offline, but here, we would be looking for device
adb reboot bootloader -- This reboots the device into Fastboot mode, also called as HBOOT or Bootloader. This mode is necessary for flashing the recovery.img file
fastboot oem unlock -- This is to ensure that you can flash xxxx.img files to specific partitions of the device.
fastboot flash <<partitionname>> <<nameofrecoveryimagefile.img>> -- This flashes the specific partition image file to the specified partition. Here, we would be looking for something like fastboot flash recovery philzrecoverys5plus.img for the PhilZ Touch Recovery and fastboot flash recovery twrprecovery.img for the TWRP Recovery and fastboot flash recovery cwmrecoverys5plus.img for the.... Well, you understand what I mean. This should show some text on the device like Transferring Flash or Writing Flash and the Time and Speed of it, that would confirm your flashing.
fastboot reboot -- This command reboots the device into the normal system, and lo, you're ready to go !
Click to expand...
Click to collapse
From here, you can reboot to recovery and back again without any issues. This is the tried and tested method, the method which worked perfectly when I tried it on my device. Else, if you have no patience for connecting the Phone to the PC, jabbing on the keyboard and entering n number of commands, you could try this out :
2nd Method ( Using Terminal Emulator ) -- This doesn't need the phone to be connected to the computer.
Place the recovery.img file in the Internal Storage or External SD Card -- Here, I'm placing it as in storage/sdcard0/xxxxrecovery.img
Install Terminal Emulator or any such app onto the phone and Open it.
Type these commands one by one :
su -- This gives root permissions to the Command Executor.
flash_image recovery /storage/sdcard0/xxxxrecovery.img -- This flashes the recovery image file to the recovery partition.
Close the Terminal Window.
Done !
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Another Note : If you're following the Second ( Terminal Emulator ) Method, note that there is a space between flash_image and recovery and the path of the image file. The first method is the preferred one, which worked perfectly with no errors for me; while the second method is risky and might return some errors while trying it out.
Click to expand...
Click to collapse
Another Loooooong Shortened Note : The TWRP Recovery might, in some rare cases, show your battery level as 19% when it is at 99% and the same goes for the others. If you are encountering this error damn frequently, I'd recommend reverting back to the original CWM basic recovery as it doesn't show any battery info at all ! You also have the option of wiping your Battery Statistics in case the Battery Error in the Touch Recoveries made the system too show the same error. Once, after fully charging the phone to 100% and rebooting to recovery, I found that the TWRP recovery showed the battery level at 19% ! Out of curiosity, I rebooted back to the system and it too, showed it at 19% ! I just plugged it into the charger and was like Whoa !, as the battery sprang from 19% to 24% in 7 seconds flat ! I know that neither the reboot to recovery does drain out that much battery, nor does the recovery randomly perform such miracles on it. So, I just flashed CWM basic recovery to it using fastboot mode, opened it, did a Battery Stats wipe and rebooted to the System. It was back to 99% ! So, a full Battery Statistics wipe helped me solve such errors, and might do the same to you too. Just remove the battery from the phone after you power off from the recovery, put it back in, and let the phone start up. Problem Solved ! Damn, why didn't I think of this earlier ?
Click to expand...
Click to collapse
Yet Another Short-But-Not-So-Short Note : I'd recommend disabling the Boot Animation on the phone ( using ROM Toolbox Lite or Pro ) so that the possibility of bootloops is diminished. No Boot Animation = Less Chance of Bootloops !
Click to expand...
Click to collapse
One Last Note : ( Yeah, Right. )
The MIUI ROM and the Sony Xperia v2 ROM work properly. For people who have boot issues, doing a full data wipe/factory reset through the recovery will solve that problem... MIUI is pre rooted, but chainfire's SuperSU app is not installed and there is no keyboard app. The Sony Xperia v2 ROM has SuperSU installed and works properly. However, a high amount of patience is needed to wait for the ROMs to boot up...
As mentioned by cybercrawler, the internal/external swap supposedly works, and appears to be already applied in these ROMs... so, if you are going to flash a new ROM, you had better undo this change...
The clockworkmod recovery file works too, as seen in the screenshots uploaded by cybercrawler... thanks to him for testing that out.
I shall be uploading some screenshots of these in a few days. Both the ROMs run Android Jelly Bean 4.2.2, and the MIUI ROM has a update scheduler app, so I'm guessing it can be updated to 4.4 Kitkat. Anyway... if anybody knows how to bypass Dropbox Error 509 ( This account's public links are generating too much traffic and are temporarily disabled ), please download the Xperia Z v1 ROM and upload it to Google Drive...
Check this thread for further development on this device.
If anybody is willing to volunteer to try a ROM still in development for this device, you can download it here :
https://tr.im/CarbonForKarbonnv1
It is NOT READY FOR FLASHING, but is a Kitkat ROM, so anybody willing to put in their efforts in the development of this ROM can help.
Click to expand...
Click to collapse
rjt.rockx said:
The Official Karbonn Titanium S5 Plus Thread :
Note : This is for the Karbonn Titanium S5 Plus / Coolpad 7295C Device and Development related to it and its clones only.
Original Karbonn ROM :
https://tr.im/20c3b
First off, Here are the Custom Recoveries for this device :
ClockWorkMod recovery for Karbonn Titanium S5 Plus :
tr.im/RWOT
ClockWorkMod - based recovery for Karbonn Titanium S5 Plus ( modded by carliv @ xda )
tr.im/f2c21
Next, Here are the Custom ROMs
Sony Xperia Z:
https://www.dropbox.com/s/e8sq7s60de...nn_S5_Plus.zip
Note : The above mentioned link doesn't appear to work. If anybody finds this file link working, please add a post here and if possible, upload the file to Google Drive and Post the link here.
Sony Xperia Z v2:
https://tr.im/ca47d
Credits : Ajinkya Mishra
Mayank Girdhar
Miui :
http://www.needrom.com/wp-content/up...37e511_4.2.zip
( to download this, you need to log in to needrom.com first )
Also visit these pages for more help...
https://www.facebook.com/karbonns5plus
https://www.facebook.com/karbonnroms
http://karbonnroms.blogspot.in
Note : The above posted links for ROMs are not tried and tested ! Be Careful !
For some of the ROM downloads, you need to log into the respective sites...
Thanks mainly to the thunderboys team and all other developers of the respective ROMs whom I haven't mentioned.
SystemUI.apk and SystemUI.odex files:
http://www.4shared.com/rar/cyMk4Dyub...lus_Syste.html
One Last Note : ( Yeah, Right. )
The MIUI ROM and the Sony Xperia v2 ROM work properly. For people who have boot issues, doing a full data wipe/factory reset through the recovery will solve that problem... MIUI is pre rooted, but chainfire's SuperSU app is not installed and there is no keyboard app. The Sony Xperia v2 ROM has SuperSU installed and works properly. However, a high amount of patience is needed to wait for the ROMs to boot up...
As mentioned by cybercrawler, the internal/external swap supposedly works, and appears to be already applied in these ROMs... so, if you are going to flash a new ROM, you had better undo this change...
The clockworkmod recovery file works too, as seen in the screenshots uploaded by cybercrawler... thanks to him for testing that out.
I shall be uploading some screenshots of these in a few days. Both the ROMs run Android Jelly Bean 4.2.2, and the MIUI ROM has a update scheduler app, so I'm guessing it can be updated to 4.4 Kitkat. Anyway... if anybody knows how to bypass Dropbox Error 509 ( This account's public links are generating too much traffic and are temporarily disabled ), please download the Xperia Z v1 ROM and upload it to Google Drive...
By the way, I'll be uploading links to some must-have apps for a custom ROM user within a few days. Check this thread for further development on this device.
Click to expand...
Click to collapse
Hey there,my question might seem foolish but just wanted to know if our device supports USB otg?
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
cybercrawler said:
Hey there,my question might seem foolish but just wanted to know if our device supports USB otg?
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes and No.
No, as it isn't included in the device's features and comes with no otg cable.
Yes, if you buy a third party USB OTG cable and install chainfire's stickmount app.
Here's the link to the app :
https://play.google.com/store/apps/details?id=eu.chainfire.stickmount
and the xda thread :
http://forum.xda-developers.com/galaxy-nexus/themes-apps/23-03-2014-stickmount-v3-01-t1400034
Hope it helps !
Heck is their the possibility that i might get bootloop!!!Because the last time I tried one of Chainefire's app(chain fire 3D)I got stuck on 1.But anyways thanks
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
cybercrawler said:
Heck is their the possibility that i might get bootloop!!!Because the last time I tried one of Chainefire's app(chain fire 3D)I got stuck on 1.But anyways thanks
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nah, there is no possibility of getting bootloop. The app doesn't need reboot at all !
Good news !
Finally, TWRP Recovery v 2.7.1.0 has been ported to our device by... me.
It works !
Features :
Touch recovery
Navigation buttons enabled
Displays Time, Date, Battery, etc.
File Manager built in
Option to Partition SD Card
Terminal Commands supported
ADB Sideload available
Ability to reboot into System, Recovery, Bootloader or Power Off
Can mount USB Storage
Toggles:
Zip file signature verification
Usage of rm -rf instead of formatting
Skip MD5 generation during backup
Enable MD5 verification of backup files
Screen Timeout Setting
Brightness Slider
Time zone Chooser
Keyboard built-in
Uploading the recovery.img file after some time. Check this thread for further updates !
Here's the link to the TWRP Recovery :
https://tr.im/1757c
Hope it helps !
rjt.rockx said:
Here's the link to the TWRP Recovery :
https://tr.im/1757c
Hope it helps !
Click to expand...
Click to collapse
Still working on the Carbon ROM... May take a few more days to create a working,booting ROM !!!
( Creating a new update binary file now, old one wasn't working. )
Anyway, after this and the flashable stock rom zip file, i'll be porting miui 6 to this device !
After that, maybe, I was thinking of an Android L ROM for this device...
Anyway, Back to Project CarbonForKarbonn for now...
Could anyone upload the specifications of moto g (codename falcon) in a post here ?
I need to know it's features and some information abt. it, like whether it supports dual sim, has external sd card support, etc.
so that I could rectify any problems which are occuring because of such non-compatibility errors.
Looooooong schedule... this might take forever...
rjt.rockx said:
Still working on the Carbon ROM... May take a few more days to create a working,booting ROM !!!
( Creating a new update binary file now, old one wasn't working. )
Anyway, after this and the flashable stock rom zip file, i'll be porting miui 6 to this device !
After that, maybe, I was thinking of an Android L ROM for this device...
Anyway, Back to Project CarbonForKarbonn for now...
Could anyone upload the specifications of moto g (codename falcon) in a post here ?
I need to know it's features and some information abt. it, like whether it supports dual sim, has external sd card support, etc.
so that I could rectify any problems which are occuring because of such non-compatibility errors.
Looooooong schedule... this might take forever...
Click to expand...
Click to collapse
As for TWRP how should I flash it?I already have CWM so what should I do in this case? I just want to try TWRP so pls tell me how should I remove CWM.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
cybercrawler said:
As for TWRP how should I flash it?I already have CWM so what should I do in this case? I just want to try TWRP so pls tell me how should I remove CWM.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You need to have ADB and Fastboot tools and the recovery file in the same folder.
Connect the device to the computer, open USB Debugging in Android, open a command window in the folder with adb and twrprecovery.img image ( Shift + Right Click ), and type these commands in it :
adb root -- Don't worry if this shows any error like adbd cannot run as root in production builds. Just proceed with the next step.
adb devices
adb reboot bootloader
fastboot flash recovery twrprecovery.img -- This will automatically format that partition and install the recovery image to it.
fastboot reboot
adb reboot recovery
Done !
Anyway... Building the final parts of the Carbon Nightly ROM, also simultaneously working on MIUI 6 for this device.
Stock ROM build is happening... Just have to generate the updater-script and the update binary.
Status of Each Build :
Carbon ROM : Needs a new Update Binary, creating it, coding it.
TWRP Recovery : Done !
MIUI 6 : Downloading the latest release version. Porting and Update Binary and Updater Script pending.
Stock Flashable Zip : Creating all Update files from scratch, system folder is ready, deodexing pending, App updates pending.
Xperia v3 : Boot Animation Build Progressing, Updating all stock Google apps, Adding Xposed Framework, etc.
Android L ROM : Waiting for a Stable Android L ROM to be released here, still no progress.
Here are the basic mount points of this device which I accidentally discovered while messing about in the Stock ROM :
system : [email protected] : dev/block/mmcblk0p8 -- This is for the System folder, has ext4 partition type
data : [email protected] : dev/block/mmcblk0p10 -- This is for the Data folder, has ext4 partition type
cache : [email protected] : dev/block/mmcblk0p9 -- This is for the Cache folder, has ext4 partition type
Hope it helps !
Which do you think is better : External SD Card as Main Storage or Internal SD Card as Main Storage ?
Anybody can reply by posting here.
This question is for the Carbon ROM and the Stock Flashable Zip ROM.
I felt I should ask you this question as I felt that Internal SD Card has way too less storage for me, but my decision cannot be everybody's decision, can it ?. ( I have 180+ Apps on this device, all linked to SD Card ( 32 gb, ~1.5 gb free space remaining ) ).
rjt.rockx said:
Which do you think is better : External SD Card as Main Storage or Internal SD Card as Main Storage ?
Anybody can reply by posting here.
This question is for the Carbon ROM and the Stock Flashable Zip ROM.
I felt I should ask you this question as I felt that Internal SD Card has way too less storage for me, but my decision cannot be everybody's decision, can it ?. ( I have 180+ Apps on this device, all linked to SD Card ( 32 gb, ~1.5 gb free space remaining ) ).
Click to expand...
Click to collapse
Internal SD card is always a better options.Anyways keep it up with all the developments.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
But then, what about the apps ? Wont you need that much storage for apps ?
rjt.rockx said:
But then, what about the apps ? Wont you need that much storage for apps ?
Click to expand...
Click to collapse
But any was 2 GB storage is much low.Heck I have installed so much things on my device I have been having 'storage space running out' since two weeks!Anyways try to keep the internal storage as our SD Card.
Oh and nobody seems to be active on this thread except you and me.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
cybercrawler said:
But any was 2 GB storage is much low.Heck I have installed so much things on my device I have been having 'storage space running out' since two weeks!Anyways try to keep the internal storage as our SD Card.
Oh and nobody seems to be active on this thread except you and me.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah... But once I upload the ROMs which I am building, some more will definitely visit.
Hi rjt.rockx.....Thank you very much for ur hard work to make our device pretty awesome....
Plz make the ext. Sd card as main storage bcoz 2gb space s not enough for application itself.......
Wishing u all the best in ur current n future projects....:beer::beer::beer:
Sent from my GT-N8000 using XDA Premium 4 mobile app
---------- Post added at 01:21 AM ---------- Previous post was at 01:17 AM ----------
Currently am using xperia v2 rom....everything works pretty good n smooth.........Eagerly waiting for ur future updates.......And one more thing , camera quality s not that good in low light. So any changes will be pretty nice too....
Sent from my GT-N8000 using XDA Premium 4 mobile app
rjt.rockx said:
Yeah... But once I upload the ROMs which I am building, some more will definitely visit.
Click to expand...
Click to collapse
Is there any way to change the on-screen soft keys to look them like that of Nexus 5 lollipop soft keys.They look really cool and other thing is the transparency of the on screen buttons.It would be great if you made this above mod in the new ROM
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
algates said:
Hi rjt.rockx.....Thank you very much for ur hard work to make our device pretty awesome....
Plz make the ext. Sd card as main storage bcoz 2gb space s not enough for application itself.......
Wishing u all the best in ur current n future projects....:beer::beer::beer:
Sent from my GT-N8000 using XDA Premium 4 mobile app
---------- Post added at 01:21 AM ---------- Previous post was at 01:17 AM ----------
Currently am using xperia v2 rom....everything works pretty good n smooth.........Eagerly waiting for ur future updates.......And one more thing , camera quality s not that good in low light. So any changes will be pretty nice too....
Sent from my GT-N8000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah, I'm working on that. You know that camera you have in other Xperia devices with all that Timescape feature and everything ? I'm adding that to the updated version of this ROM. But, the ROM will still be based on Android Jellybean 4.2.2. I'm sorry, but there's nothing I can do about that because, if I change the base OS, I'll have to rebuild all the apps from scratch to fit alongside the new permissions and all that stuff, which will take off most of my time.
I'll consider your decision about the Main Storage, but there's one drawback about using it that way. You won't be able to remove your SD Card or unmount it while the OS is on. If that's okay with you, please reply. Anyway, if you want to change it afterwards, you can do so by the vold.fstab edit which cybercrawler had mentioned here : http://forum.xda-developers.com/showpost.php?p=55154053&postcount=31
Thanks for your opinion, by the way !
Hello gc2 users,
first as usaual im not responsible for bricked devices and dead sd cards if u dont any thing wrong contact me in youtube by commenting
BACK UP FIRST INCASE ANYTHING HAPPEN.......
+required =
+galaxy core 2 phone
+rooted and required TWRP RECOVERY
MOST NEEDED A BRAIN;;;;;
AS I CAN NOT UPLOAD LINK IM REQUESTING GC2 USERS TO SEARCH IN YOU TUBE [yadurobo] in youtube from first results' select first video based on this custom rom in comment section i posted a link that would lead to download in google drive...from there download the file
+ if any senior members can post the link from the video as i mentioned above as a reply will be appreciated
EXTRACT ZIP YOU HAVE DOWNLOADED
PASTE IT INTO UR EXTSD.CARD IN TWRP FOLDER
BOOT INTO TWRP RECOVERY
CHOOSE RESTORE IN MAIN MENU OF TWRP
CHOOSE BACKUP FILE YOU HAVE DOWNLODED
THEN WOLA,,,,
IT STARTS TO INSTALL WAIT FOR 10 MINS MAX
[
REBOOT TWO TIMES AFTER INSTALLATION
NO START UP WIZARD AS IT IS MY BACKUP
IT IS SIMPLE TO DO THAN ZIP FLASHING
WORKING EVERYTHING
NOT WORKING=NIL
ENJOY.........
this rom is made by 90 percentage blind user thats me
hit tnx button if this worked for you ...........
and if any devolopers can support me to make this backup to a flashablezip will be a great help indeed
do inform me if this doesnt work
i inserted a link so pls flash that file too after flashing rom
yadu123 said:
Hello gc2 users,
first as usaual im not responsible for bricked devices and dead sd cards if u dont any thing wrong contact me in youtube by commenting
BACK UP FIRST INCASE ANYTHING HAPPEN.......
+required =
+galaxy core 2 phone
+rooted and required TWRP RECOVERY
MOST NEEDED A BRAIN;;;;;
AS I CAN NOT UPLOAD LINK IM REQUESTING GC2 USERS TO SEARCH IN YOU TUBE [yadurobo] in youtube from first results' select first video based on this custom rom in comment section i posted a link that would lead to download in google drive...from there download the file
+ if any senior members can post the link from the video as i mentioned above as a reply will be appreciated
EXTRACT ZIP YOU HAVE DOWNLOADED
PASTE IT INTO UR EXTSD.CARD IN TWRP FOLDER
BOOT INTO TWRP RECOVERY
CHOOSE RESTORE IN MAIN MENU OF TWRP
CHOOSE BACKUP FILE YOU HAVE DOWNLODED
THEN WOLA,,,,
IT STARTS TO INSTALL WAIT FOR 10 MINS MAX
[
REBOOT TWO TIMES AFTER INSTALLATION
NO START UP WIZARD AS IT IS MY BACKUP
IT IS SIMPLE TO DO THAN ZIP FLASHING
WORKING EVERYTHING
NOT WORKING=NIL
ENJOY.........
this rom is made by 90 percentage blind user thats me
hit tnx button if this worked for you ...........
and if any devolopers can support me to make this backup to a flashablezip will be a great help indeed
do inform me if this doesnt work
Click to expand...
Click to collapse
what is the version of the rom?
355H? HN? M?
355H
Sent from my SM-G900F using XDA Free mobile app
@yadu123 Screenshots? Links? More details bro!!!
Hi, awesome work:good:
Video:
youtube.com/watch?v=NV5b2EElrIs
Download:
docs.google.com/uc?export=download&confirm=1IND&id=0Bytk4Z6klYZybG5SZFpUeFBBVU0
Regards.
SCREEN SHOTS......
Sent from my SM-G900F using XDA Free mobile app
yadu123 said:
SCREEN SHOTS......
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
Not working with 355m , i changed the boot.img but no sucess
i'll stay with my modded rom, great work
cheers
tnx for info any way you got A nice rom there upload it brother
Sent from my SM-G900F using XDA Free mobile app
Looks so cool
i am downloading now
can i ask for a short description of how you made this, more like a bar story then a how to
thanks will let you know how it goes
i have SM-G355H and i allready have and use that exra zip init.d patch . i normaly install the apk as well. but i dont really use startup scripts that much
downloading
Hi im currently downloading your creation, i found 2 links, first is the one in mega and its around 400mb and another in google drive and its around 900mb.
Regarding the one in mega, this is the one that i need to copy in my twrp folder and then restore using twrp?
How about the one in google drive, is this flashable using twrp and install?
Thank you and i hope i can make it work, ive watched the video in youtube and its really nice you did a good job :good:
how to make it look like the one on youtube?
Hi im able to install this and please share the modifications you did, so that it will look like the one on your youtube video?
Thank you
yadu123 said:
Hello gc2 users,
first as usaual im not responsible for bricked devices and dead sd cards if u dont any thing wrong contact me in youtube by commenting
BACK UP FIRST INCASE ANYTHING HAPPEN.......
+required =
+galaxy core 2 phone
+rooted and required TWRP RECOVERY
MOST NEEDED A BRAIN;;;;;
AS I CAN NOT UPLOAD LINK IM REQUESTING GC2 USERS TO SEARCH IN YOU TUBE [yadurobo] in youtube from first results' select first video based on this custom rom in comment section i posted a link that would lead to download in google drive...from there download the file
+ if any senior members can post the link from the video as i mentioned above as a reply will be appreciated
EXTRACT ZIP YOU HAVE DOWNLOADED
PASTE IT INTO UR EXTSD.CARD IN TWRP FOLDER
BOOT INTO TWRP RECOVERY
CHOOSE RESTORE IN MAIN MENU OF TWRP
CHOOSE BACKUP FILE YOU HAVE DOWNLODED
THEN WOLA,,,,
IT STARTS TO INSTALL WAIT FOR 10 MINS MAX
[
REBOOT TWO TIMES AFTER INSTALLATION
NO START UP WIZARD AS IT IS MY BACKUP
IT IS SIMPLE TO DO THAN ZIP FLASHING
WORKING EVERYTHING
NOT WORKING=NIL
ENJOY.........
this rom is made by 90 percentage blind user thats me
hit tnx button if this worked for you ...........
and if any devolopers can support me to make this backup to a flashablezip will be a great help indeed
do inform me if this doesnt work
i inserted a link so pls flash that file too after flashing rom
Click to expand...
Click to collapse
not working on SM-G355HXXU0AOB1......also the tutorial, nothing is showing up after clicking the restore button in twrp recovery...i followed your instruction like after extracting the downloaded zipfile to put it inside the twrp folder under sd card storage....
i tried flashing your file and was stucked up to boot animation only...im also confused because you have 2 different files posted..one in mega which is around 400 mb and the other one in dropbox is 900 plus mb..both are not working ...
Grindher said:
Not working with 355m , i changed the boot.img but no sucess
i'll stay with my modded rom, great work
cheers
Click to expand...
Click to collapse
can post the tutorial to do this?
But i didnt post link to mega i only posted google drive link & i dont hv accountnin mega too
dwenski said:
Hi im currently downloading your creation, i found 2 links, first is the one in mega and its around 400mb and another in google drive and its around 900mb.
Regarding the one in mega, this is the one that i need to copy in my twrp folder and then restore using twrp?
How about the one in google drive, is this flashable using twrp and install?
Thank you and i hope i can make it work, ive watched the video in youtube and its really nice you did a good job :good:
Click to expand...
Click to collapse
Read carefully bro the one in google drive is correct link restore it
Hi All,
I am planning on providing Samsung Galaxy stock debloated ROMs for M series FLOSS or GFS version.
Please contact me here for testing purposes and if anyone is interested.
Few added stuffs maybe given as well, depending on the kind of framework changes, as I will avoid any changes, as the FW breaks a lot.
I do not have any phone, hence all testing will be on the testers, so be sure to keep backups in case you agree to test.
Moreover, OTA is not possible and most probably it will be a decrypted OS. You will need good bandwidth and patience to do it.
Everything that you people do on TG can be done here, needs patience, which is all one should always have.
Share this with others, who wants to join. I will try any other series too, but only android 9 and 10 at the moment. Android 11 is not in my list.
Glad to hear that
TWRP
Nazim navas said:
Glad to hear that
Click to expand...
Click to collapse
So, that TWRP from Christin Koshy work on current version too? (the one released 3 days ago by Samsung?)
twrp_3.4.0_by_nevidimka655.tar
If yes, then I will use it for the build.
vdbhb59 said:
So, that TWRP from Christin Koshy work on current version too? (the one released 3 days ago by Samsung?)
twrp_3.4.0_by_nevidimka655.tar
If yes, then I will use it for the build.
Click to expand...
Click to collapse
I am not sure about the twrp it has some bugs
M21_Testing_20200929.tar
Nazim navas said:
I am not sure about the twrp it has some bugs
Click to expand...
Click to collapse
Have built, and uploading. It is a heavy file, around 4.2 GB (hopefully only one time). Flash with ODIN (in AP). Uncheck auto reboot.
Reboot to stock recovery, format data, mount /system, format data once again, and reboot to DOWNLOAD mode.
Then try each of the following boot methods:
01. Reboot normally (you can keep auto-reboot" checked for this trial) - If fails, try 02..
02. After flashing, reboot to recovery, format data, dalvik/cache, reboot - If fails, try 03..
03. Extract the 3 files, and zip to a .zip extension via 7zip and not WinRAR. Add the META-INF (full folder) folder from the attached zip, to the ROM zip and flash via TWRP (the one available).
-- Unzip the META-INF zip, and unzip the tar file ROM. Copy them all to say desktop and add all 3 files and the META-INF folder to .zip via 7Zip. Resultant file should be a zip file consisting of META-INF folder, boot, system and recovery image (.img) files.
-- The tar file consists of boot.img, recovery.img, system.img. - If fails, try 04..
04. If for any reason you are not able to boot, just replace the boot and recovery with the original/stock boot.img and recovery.img, do not change the system.img I gave. Add all to a tar file (via 7Zip) and flash via ODIN. Please note, do not use any other file. Chances are you will boot.
Please note, booting may take a minimum of 10-15 minutes, so please be patient. Once SAMSUNG logo comes it should ideally boot. I am yet to get a way to make DM-Verity work with ODIN. I will post link of ROM soon.
ROM uploaded. N. B. Testing only. https://cloud.operationtulip.com/s/nb7TjDAskmL47tn/download
Ohh, and in between each try, or failures, you may have to format data (may). At times I have seen for any reason if it fails, clearing or formatting data is needed which is odd on M series, but not always. Probably, trial error mode, but I do recall.
Also, in the 4th option, if you boot with stock boot and recovery, you will not be rooted. I will try and add root to the system, but cannot guarantee as of yet.
Nazim navas said:
I am not sure about the twrp it has some bugs
Click to expand...
Click to collapse
Have built few testing TWRP's. Try them out and let me know what works, what not please.
1. TWRP+Mod - This is a modified version of what I wanted to build out of TWRP. This consists of that old TWRP, but modified to suit the latest builds. - Link
2. TWRP+Stock - This has stock features enabled. Should be good to go anyways. - Link
3. TWRP+vdbhb59 - This I have modified in many many ways, so should be good to go as well. - Link
4. TWRP_20201001_Test - Image/Tar - This I have made from scratch. If you say this one works, then I will load this as Unofficial (until TWRP accepts it) as Android 10 working.
In each let me know, what is working, and what is not.
You should be able to flash DM-Verity through these, post you install the OS I gave. File attached (do not rename the file).
All M21
If you face any issues try flashing twrp+boot via .tar in AP in one file. Then check.
There are telegram groups check thier forums !
prashantp01 said:
There are telegram groups check thier forums !
Click to expand...
Click to collapse
Is anyone working on TWRP? For M21 yet? Android 10
Twrp odin fail
FAILED. does not installed on new firmware one ui 2.1
---------- Post added at 03:52 AM ---------- Previous post was at 03:41 AM ----------
Twrp not installed one ui 2.1 . The last firmware.
Odin failed
ahmad_subqi said:
FAILED. does not installed on new firmware one ui 2.1
---------- Post added at 03:52 AM ---------- Previous post was at 03:41 AM ----------
Twrp not installed one ui 2.1 . The last firmware.
Odin failed
Click to expand...
Click to collapse
Yeah I know. As I mentioned, trial error run and testing to understand what can be done.
Can you post logs?
Nazim navas said:
The twrp not working
---------- Post added at 07:14 AM ---------- Previous post was at 07:10 AM ----------
I rooted m21 through odin
Click to expand...
Click to collapse
Okay, can you try what I mentioned about the ROM through ODIN? I need to know that first. TWRP is not the necessity as of now, but to boot up modified system binary is. Please flash the rom via ODIN, as mentioned in the earlier post. Not with TWRP.
Edit: Also give what ever error you face. Snapshot, in writing, and the stage at which you get the error, etc.,
Check if any of these TWRP work: https://www.androidfilehost.com/?w=files&flid=318632
Nazim navas said:
A51 ported twrp working but internal storage not working not sure about first one
---------- Post added at 02:54 AM ---------- Previous post was at 02:53 AM ----------
The bugs in ported twrp from a51
I checked the twrp last 2 days it is not working perfectly as expected
*unable to backup or restore showing error like key is absent /twrp folder is not found
*error in internal storage may be due to encryption
*error flashing dm verity zip/multi disabler zip (/odm not found )
*unable to flash gsi images as it is not showing system image during flashing it only shows boot,recovery,optics,spectrum and super
*unable to repair /change format in wipe section
*all others like sd card /usb is mounting no issue with that
All this are my personal experience when i tested the twrp hope any developers will fix this soon
Click to expand...
Click to collapse
Okay, these bugs would have been there, as whoever ported they could not get a working one having /superimage and since /odm is not there as separate. ODM is a supra path, rather than individual path. This will take time, else will have to gather latest stock and make it as Pie would be like. Will take time though.
Thanks for testing out mate.
i got m31, ill be happy to test if any m31 develeoping avilible
anilkuruhan said:
i got m31, ill be happy to test if any m31 develeoping avilible
Click to expand...
Click to collapse
Thanks mate. Can you share the latest version and country code details? Also your system details (about) page. It will help me find more information.
Nazim navas said:
Model no SM-M215F/DS
Click to expand...
Click to collapse
The trouble with latest updates is it has superimage. The super unpacker/packer does not work properly. You tested earlier. M21 has that. M31, I have not checked yet. If it has superimage too, then I will have to wait till I get a working one. Will check.
Thanks again.
Nope, superimage. I am having serious trouble with my W10 to run these even with VMUbuntu. Will only be able to work if that acts properly.