i have problem in my sensation ,when do unlock for bootloader then make lock bootloader i forget and do lock bootloader twice ,and now apeear to me <relocked bootloader> with <s-on>and now i make unlock bootloader toooooo much times and bad result and when install recovery write it <<<<FAILED (remote: signature verify fail)>>>>please help me to unlock it again
gawgaw said:
i have problem in my sensation ,when do unlock for bootloader then make lock bootloader i forget and do lock bootloader twice ,and now apeear to me <relocked bootloader> with <s-on>and now i make unlock bootloader toooooo much times and bad result and when install recovery write it <<<<FAILED (remote: signature verify fail)>>>>please help me to unlock it again
Click to expand...
Click to collapse
did you try to use unlocked bin code again?if not then do it again
i do it tooo much,and using many tools
now i can think only one thing.flash the specific ruu.exe for your device and start from the beginning
see here
http://forum.xda-developers.com/showthread.php?t=1672425
otherwise if you have patience wait for someone else to provide you a solution
i do all of this and install <RUU FILES>and the problem not fixed ,i copy this information to help you and indicate my problem
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\george>cd C:\Program Files\Android\android\platform-tools
C:\Program Files\Android\android\platform-tools>Unlock_code.bin
C:\Program Files\Android\android\platform-tools>fastboot flash unlocktoken Unloc
k_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.160s]
writing 'unlocktoken'...
FAILED (remote: unlock token check failed)
finished. total time: 0.192s
C:\Program Files\Android\android\platform-tools>fastboot erase cache
erasing 'cache'...
OKAY [ 3.243s]
finished. total time: 3.250s
C:\Program Files\Android\android\platform-tools>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
(bootloader) Start Verify: 3
(bootloader) erase sector 130560 ~ 131071 (512)
OKAY [ 3.190s]
finished. total time: 3.195s
C:\Program Files\Android\android\platform-tools>fastboot flash zip PG58IMG.zip
sending 'zip' (23984 KB)...
OKAY [ 4.164s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 9.370s
C:\Program Files\Android\android\platform-tools>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 0.431s]
finished. total time: 0.435s
confirm something
when you use the ruu.exe did you have successful result for flashing it?
yes,the result successful but the problem not fixed ,bootloader relocked
gawgaw said:
yes,the result successful but the problem not fixed ,bootloader relocked
Click to expand...
Click to collapse
ok then
the only thing that i can tell you is to follow the whole process for unlocking the bootloader
start from the beginning.if that don't work too then i am out of ideas
best wishes
if i think something else i will tell you
thank you tooo much ,im sorry to tired you
Can you boot the phone now?
Also did the phone came from a repair with motherboard replaced?
Sent from my HTC Sensation using xda premium
i have a bricked device and my drivers and all others are ok but when i try to do the command
"fastboot -i 0x0B05 flash system blob"
or
"fastboot -i 0x0B05 flash recovery twrp.blob"
it writing back
"sending ' system' (800931 KS)...
FAILED (command write failed (Unknown error))
finished. total time: 0.641s"
or
"sending 'recovery' (7548 KB)...
FAILED (command write failed (Unknown error))
finished. total time: 0.641s"
i have installed a new drivers for the fastboot and yet its not working
if someone know how to fix it i had like for his help very much
aviv903 said:
i have a bricked device and my drivers and all others are ok but when i try to do the command
"fastboot -i 0x0B05 flash system blob"
or
"fastboot -i 0x0B05 flash recovery twrp.blob"
it writing back
"sending ' system' (800931 KS)...
FAILED (command write failed (Unknown error))
finished. total time: 0.641s"
or
"sending 'recovery' (7548 KB)...
FAILED (command write failed (Unknown error))
finished. total time: 0.641s"
i have installed a new drivers for the fastboot and yet its not working
if someone know how to fix it i had like for his help very much
Click to expand...
Click to collapse
Did you try a different USB port ?
Thx Josh
lj50036 said:
Did you try a different USB port ?
Thx Josh
Click to expand...
Click to collapse
Yes Josh but it didnt appears to work
any other ideas?
aviv903 said:
Yes Josh but it didnt appears to work
any other ideas?
Click to expand...
Click to collapse
The bootloader is unlocked ?
lj50036 said:
The bootloader is unlocked ?
Click to expand...
Click to collapse
Yes the bootloader is unlocked
but yet no way to fix it
aviv903 said:
Yes the bootloader is unlocked
but yet no way to fix it
Click to expand...
Click to collapse
We can use hangouts sometime if you would like ....
Shoot me a PM if you would like to take a look into this ...
Thx Josh
lj50036 said:
We can use hangouts sometime if you would like ....
Shoot me a PM if you would like to take a look into this ...
Thx Josh
Click to expand...
Click to collapse
i had like to
but if you have skype i really preffer skype
anyway tell me a time and i will check if i can
Can somebody help me?
After blankflash bootloader 411A* i can revive
my phone with any rom.
XT1032 moto g 2013.
Every time it gives error with:
Preflash validation failed or permission denied
I've try to blankflash again by forcing drivers
in win 10 to see it.
The device is seen (device manager)as qualcom 9008.
It doesn't do anything said waiting for device when i try to blankflash again.
So i am stuck in a crazy locked bootloader with
no partition on phone nothing.....
I've try to flash almost all available rom for it.
Same result,every time failed with permision denied
or partition downgraded for gpt
(blue letters warning)
or Preflash validation failed .....
Any idea how can i flash a moto or boot image of
any rom to revive it?
I am tired of trying so many.....
If i can make the phone be seen
by RSD lite i can try to flash thru it.
But is not recognize by any of
the RSD Lite versions....
I think i'm gonna bin it.
Thanks for any idea........
Oh,and the story behind....
Original:moto g 5.02 tesco firmware....
Unlocked bootloader.....
Flashed 4.4 GPE....OK
Updated OTA....bricked....
only seen in
PC as qulcomm.....
Next...bankflashed.....ok
Bootloader shows status locked
Phone booting in fastboot and that's it....
'Preflash validation' error is normally due to having a locked Bootloader and trying to flash an older firmware than previously installed, i.e 5.0.2 over 5.1. You may have corrupted the Bootloader by applying the OTA Update after flashing 4.4.4. You are breaking every rule in the book and seem intent on completely destroying your phone.
Flash the latest XT1032 Factory Firmware Image using Fastboot. If this is not successful, it would help to see a log of the flashing process. Copy and paste command prompt screen. Take screenshots if necessary.
Firmware Images: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Fastboot Tutorial: http://forum.xda-developers.com/showthread.php?t=2542219
Use mfastboot to flash. However, ultimately, you may need to apply the unbrick method - http://forum.xda-developers.com/moto-g/help/how-to-unbrick-moto-g-falcon-t3394788
Thank you!
I have try all above....
It looks like the blankflash locked the
bootloader (previously was unlocked)
and is not responding to
unlock it....even with the proper unlock key....
(permission denied)
That why i need an idea how to
blankflash/rewrite bootloader again.
I will post later on some screenshots with getvarall.
Yes,i sort it out, if other people having same problem need to flash only gpt.bin.
And this one extracted ONLY from 5.1 brazilian rom.
Any other procedure will not restore bootloader
to initial state.
After that you can flash any other compatible rom...
Thanks to all especially to Chalkydri who point me
to the brazilian rom.
Google * unbrick moto g*. You will get a xda thread dated june 2016. Follow the steps worked for my hard bricked moto g might as well work for you.
when I flashed falcon_502_partitions_nomodem.zip on my moto g XT1028 and then I reboot to bootloader nothing is there and when I tried to restart my devices the screen is black and the fastboot mode is also not visible and I'm not able to flash anything to make my device work.
mihaidenis said:
Yes,i sort it out, if other people having same problem need to flash only gpt.bin.
And this one extracted ONLY from 5.1 brazilian rom.
Any other procedure will not restore bootloader
to initial state.
After that you can flash any other compatible rom...
Thanks to all especially to Chalkydri who point me
to the brazilian rom.
Click to expand...
Click to collapse
which brazilian rom do you use?
7servin said:
which brazilian rom do you use?
Click to expand...
Click to collapse
Have a look in here I think is this one:
http://forum.xda-developers.com/devdb/project/dl/?id=14560
If is not working google for 5.1 brazilian rom for moto
g 2013.
I suppose you have XT1032.
Presently I don't own the Moto G.
Been stolen.....
Good luck.
mihaidenis said:
Have a look in here I think is this one:
http://forum.xda-developers.com/devdb/project/dl/?id=14560
If is not working google for 5.1 brazilian rom for moto
g 2013.
I suppose you have XT1032.
Presently I don't own the Moto G.
Been stolen.....
Good luck.
Click to expand...
Click to collapse
yes i have one xt1032 i google that and download but not working
i have de same error Preflash validation i tried with yours
mihaidenis said:
Can somebody help me?
After blankflash bootloader 411A* i can revive
my phone with any rom.
XT1032 moto g 2013.
Every time it gives error with:
Preflash validation failed or permission denied
I've try to blankflash again by forcing drivers
in win 10 to see it.
The device is seen (device manager)as qualcom 9008.
It doesn't do anything said waiting for device when i try to blankflash again.
So i am stuck in a crazy locked bootloader with
no partition on phone nothing.....
I've try to flash almost all available rom for it.
Same result,every time failed with permision denied
or partition downgraded for gpt
(blue letters warning)
or Preflash validation failed .....
Any idea how can i flash a moto or boot image of
any rom to revive it?
I am tired of trying so many.....
If i can make the phone be seen
by RSD lite i can try to flash thru it.
But is not recognize by any of
the RSD Lite versions....
I think i'm gonna bin it.
Thanks for any idea........
Oh,and the story behind....
Original:moto g 5.02 tesco firmware....
Unlocked bootloader.....
Flashed 4.4 GPE....OK
Updated OTA....bricked....
only seen in
PC as qulcomm.....
Next...bankflashed.....ok
Bootloader shows status locked
Phone booting in fastboot and that's it....
Click to expand...
Click to collapse
mihaidenis said:
Thank you!
I have try all above....
It looks like the blankflash locked the
bootloader (previously was unlocked)
and is not responding to
unlock it....even with the proper unlock key....
(permission denied)
That why i need an idea how to
blankflash/rewrite bootloader again.
I will post later on some screenshots with getvarall.
Click to expand...
Click to collapse
please reply if you got any suggestion
thank you
please help me to flash locked bootloader
mihaidenis said:
Yes,i sort it out, if other people having same problem need to flash only gpt.bin.
And this one extracted ONLY from 5.1 brazilian rom.
Any other procedure will not restore bootloader
to initial state.
After that you can flash any other compatible rom...
Thanks to all especially to Chalkydri who point me
to the brazilian rom.
Click to expand...
Click to collapse
The same issue i am facing here i am trying flash all version of gpt.bin file but no use it always shows bootloader unlock disabled and unknown partition name
please advise to rectifie it
Fortboy said:
please reply if you got any suggestion
thank you
Click to expand...
Click to collapse
Try some 5.1 brazilian rom.Google for it.
You must have XT1032 moto G for this to work.
And try flash whole rom.
Even if it gives you some errors you might be able to unlock bootloader to previous state....
Good luck!
Fortboy said:
please reply if you got any suggestion
thank you
Click to expand...
Click to collapse
Try some 5.1 brazilian rom.Google for it.
You must have XT1032 moto G for this to work.
And try flash whole rom.
Even if it gives you some errors you might be able to unlock bootloader to previous state....
Good luck!
Please put link here
mihaidenis said:
Yes,i sort it out, if other people having same problem need to flash only gpt.bin.
And this one extracted ONLY from 5.1 brazilian rom.
Any other procedure will not restore bootloader
to initial state.
After that you can flash any other compatible rom...
Thanks to all especially to Chalkydri who point me
to the brazilian rom.
Click to expand...
Click to collapse
hi i am facing the same issue here please let me know the which gpt.bin file was supported to you
Thank you in advance
Hi guys, I am Brazilian and user of xt1033, after an unfortunate downgrade, I caused a hard brick in my smart, the first time that happened I managed to recover without any problem by the post here of xda, but now I think I have the same problem the guy there, when I flash in 'flash5.1' gives some error and the process does not conclude, look:
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.016s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.300s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.084s]
writing 'motoboot'...
(bootloader) Motoboot: Unknown partition name
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.122s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe reboot-bootloader
rebooting into bootloader...
OKAY [ -0.000s]
finished. total time: -0.000s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>pause
Pressione qualquer tecla para continuar. . .
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.033s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.307s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.116s]
writing 'motoboot'...
(bootloader) Motoboot: Unknown partition name
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.147s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (1060 KB)...
OKAY [ 0.065s]
writing 'logo'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.102s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.385s]
writing 'boot'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.385s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.378s]
writing 'recovery'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.431s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash system system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (257535 KB)...
OKAY [ 8.674s]
writing 'system'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 8.689s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash system system.img_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (256925 KB)...
OKAY [ 8.623s]
writing 'system'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 8.676s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash system system.img_sparsechunk.2
target max-sparse-size: 256MB
sending 'system' (256980 KB)...
OKAY [ 8.651s]
writing 'system'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 8.689s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash system system.img_sparsechunk.3
target max-sparse-size: 256MB
sending 'system' (175936 KB)...
OKAY [ 5.933s]
writing 'system'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 5.986s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (49376 KB)...
OKAY [ 1.694s]
writing 'modem'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 1.726s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe erase modemst1
erasing 'modemst1'...
(bootloader) Invalid partition name modemst1
FAILED (remote failure)
finished. total time: 0.031s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe erase modemst2
erasing 'modemst2'...
(bootloader) Invalid partition name modemst2
FAILED (remote failure)
finished. total time: 0.053s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (103 KB)...
OKAY [ 0.084s]
writing 'fsg'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.115s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe erase cache
erasing 'cache'...
(bootloader) Invalid partition name cache
FAILED (remote failure)
finished. total time: 0.047s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe erase userdata
erasing 'userdata'...
(bootloader) Invalid partition name userdata
FAILED (remote failure)
finished. total time: 0.053s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe oem fb_mode_clear
...
OKAY [ -0.000s]
finished. total time: -0.000s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe reboot-bootloader
rebooting into bootloader...
OKAY [ 0.016s]
finished. total time: 0.016s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>pause
Pressione qualquer tecla para continuar. . .
I tried several ways to install the stock but without success, and I also tried to unlock the boatloader and also failed, I tried to install another version of the boatloader and without success. I'm sorry for my bad english, I'm using google translator to talk to you. And sorry if I did something wrong, this is the first time I participate in a forum here.
This smart is my main device and I really need it, if you can help me, I thank you very much.
Hey guys, I've the same problem with the XT1032 model. My phone was bricked 4 days ago, and I tried to flash a 5.0.2 Retail US with a 41.1A Bootloader, after to flash this motoboot.img, I can't flash anything. All the times appears this same message:
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition
My bootloader is corrupt :crying:
I don't know how to solve this problem, I've tried flashing with 9-10 ROM's for my model, and all times appears this message, I tried in 3 different PC's. Anybody did solve this problem?
Hello,
Someone succeed ? If yes how ?
Thanks
please reply urgently .if anyone got any suggestion. Please
mihaidenis said:
Thank you!
I have try all above....
It looks like the blankflash locked the
bootloader (previously was unlocked)
and is not responding to
unlock it....even with the proper unlock key....
(permission denied)
That why i need an idea how to
blankflash/rewrite bootloader again.
I will post later on some screenshots with getvarall.
Click to expand...
Click to collapse
Same here and what's intriguing is that now the BL version is 0.5 with unknown Baseband. Whereas before blankflashing it was 2.7 with a baseband. Tried everything like you but without a working baseband, I can flash ROMs but no cellular connectivity. SIM cards turn out disabled
Moto G3 is Bricked,
Device is Locked Status Code:0
XT1550
Tried recovery Mode gives error:
==========
Your Status didn't startup successfully. Use the Software Repair Assistant on Computer to repair your device.
==========
Tried Fastboot it says
C:\Users\admin\Downloads\ADB\ADB and Fastboot>fastboot oem unlock
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.048s
Please help.
radnam said:
Moto G3 is Bricked,
Device is Locked Status Code:0
XT1550
Tried recovery Mode gives error:
==========
Your Status didn't startup successfully. Use the Software Repair Assistant on Computer to repair your device.
==========
Tried Fastboot it says
C:\Users\admin\Downloads\ADB\ADB and Fastboot>fastboot oem unlock
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.048s
Please help.
Click to expand...
Click to collapse
Flash stock firmware from here : https://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
Download links and FAQ are present in that thread.
adityak1303 said:
Flash stock firmware from here : https://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
Download links and FAQ are present in that thread.
Click to expand...
Click to collapse
I have tired doing the steps given. However it gives the following error:
C:\Users\admin\Downloads\ADB and Fastboot\ADB and Fastboot>fastboot oem fb_mode_set
...
FAILED (remote failure)
finished. total time: 0.031s
C:\Users\admin\Downloads\ADB and Fastboot\ADB and Fastboot>fastboot flash partition gpt.bin
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ 0.016s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 0.459s
C:\Users\admin\Downloads\ADB and Fastboot\ADB and Fastboot>astboot flash bootloader bootloader.img
'astboot' is not recognized as an internal or external command,
operable program or batch file.
C:\Users\admin\Downloads\ADB and Fastboot\ADB and Fastboot>fastboot flash bootloader bootloader.img
target reported max download size of 268435456 bytes
sending 'bootloader' (2546 KB)...
OKAY [ 0.094s]
writing 'bootloader'...
(bootloader) flashing sbl1 ...
(bootloader) Failed to erase partition
(bootloader) Failed to flash sbl1
FAILED (remote failure)
finished. total time: 1.424s
Just to be sure, you are running this in as an Administrator command window, correct?
It's bricked... Nothing is writing to the internal storage and everything is coming back FAILED. Seen a few of these recently, if it was a different error we might be able to do something but doing 'fastboot oem fb_mode_set' should never give an error.
acejavelin said:
Just to be sure, you are running this in as an Administrator command window, correct?
It's bricked... Nothing is writing to the internal storage and everything is coming back FAILED. Seen a few of these recently, if it was a different error we might be able to do something but doing 'fastboot oem fb_mode_set' should never give an error.
Click to expand...
Click to collapse
That's what I was wondering. And yes I am running Administrator Command Window.
I am just keeping my fingers crossed that someone can help me resolve the issue.
I am trying to install TWRP to my Moto G7 Power and I keep getting this:
[email protected]:~/Downloads$ fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 1.004s]
booting...
(bootloader) permission denied!
FAILED (remote failure)
finished. total time: 1.004s
[email protected]:~/Downloads$
I have OEM unlocking enabled, but on the device it says oem_locked
timba123 said:
Looks like you need to unlock your bootloader... Join this telegram group to get help with that! @mg7power
Click to expand...
Click to collapse
I had the bootloader unlocked from the developer settings and it still said permission denied