Can somebody help me?
After blankflash bootloader 411A* i can revive
my phone with any rom.
XT1032 moto g 2013.
Every time it gives error with:
Preflash validation failed or permission denied
I've try to blankflash again by forcing drivers
in win 10 to see it.
The device is seen (device manager)as qualcom 9008.
It doesn't do anything said waiting for device when i try to blankflash again.
So i am stuck in a crazy locked bootloader with
no partition on phone nothing.....
I've try to flash almost all available rom for it.
Same result,every time failed with permision denied
or partition downgraded for gpt
(blue letters warning)
or Preflash validation failed .....
Any idea how can i flash a moto or boot image of
any rom to revive it?
I am tired of trying so many.....
If i can make the phone be seen
by RSD lite i can try to flash thru it.
But is not recognize by any of
the RSD Lite versions....
I think i'm gonna bin it.
Thanks for any idea........
Oh,and the story behind....
Original:moto g 5.02 tesco firmware....
Unlocked bootloader.....
Flashed 4.4 GPE....OK
Updated OTA....bricked....
only seen in
PC as qulcomm.....
Next...bankflashed.....ok
Bootloader shows status locked
Phone booting in fastboot and that's it....
'Preflash validation' error is normally due to having a locked Bootloader and trying to flash an older firmware than previously installed, i.e 5.0.2 over 5.1. You may have corrupted the Bootloader by applying the OTA Update after flashing 4.4.4. You are breaking every rule in the book and seem intent on completely destroying your phone.
Flash the latest XT1032 Factory Firmware Image using Fastboot. If this is not successful, it would help to see a log of the flashing process. Copy and paste command prompt screen. Take screenshots if necessary.
Firmware Images: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Fastboot Tutorial: http://forum.xda-developers.com/showthread.php?t=2542219
Use mfastboot to flash. However, ultimately, you may need to apply the unbrick method - http://forum.xda-developers.com/moto-g/help/how-to-unbrick-moto-g-falcon-t3394788
Thank you!
I have try all above....
It looks like the blankflash locked the
bootloader (previously was unlocked)
and is not responding to
unlock it....even with the proper unlock key....
(permission denied)
That why i need an idea how to
blankflash/rewrite bootloader again.
I will post later on some screenshots with getvarall.
Yes,i sort it out, if other people having same problem need to flash only gpt.bin.
And this one extracted ONLY from 5.1 brazilian rom.
Any other procedure will not restore bootloader
to initial state.
After that you can flash any other compatible rom...
Thanks to all especially to Chalkydri who point me
to the brazilian rom.
Google * unbrick moto g*. You will get a xda thread dated june 2016. Follow the steps worked for my hard bricked moto g might as well work for you.
when I flashed falcon_502_partitions_nomodem.zip on my moto g XT1028 and then I reboot to bootloader nothing is there and when I tried to restart my devices the screen is black and the fastboot mode is also not visible and I'm not able to flash anything to make my device work.
mihaidenis said:
Yes,i sort it out, if other people having same problem need to flash only gpt.bin.
And this one extracted ONLY from 5.1 brazilian rom.
Any other procedure will not restore bootloader
to initial state.
After that you can flash any other compatible rom...
Thanks to all especially to Chalkydri who point me
to the brazilian rom.
Click to expand...
Click to collapse
which brazilian rom do you use?
7servin said:
which brazilian rom do you use?
Click to expand...
Click to collapse
Have a look in here I think is this one:
http://forum.xda-developers.com/devdb/project/dl/?id=14560
If is not working google for 5.1 brazilian rom for moto
g 2013.
I suppose you have XT1032.
Presently I don't own the Moto G.
Been stolen.....
Good luck.
mihaidenis said:
Have a look in here I think is this one:
http://forum.xda-developers.com/devdb/project/dl/?id=14560
If is not working google for 5.1 brazilian rom for moto
g 2013.
I suppose you have XT1032.
Presently I don't own the Moto G.
Been stolen.....
Good luck.
Click to expand...
Click to collapse
yes i have one xt1032 i google that and download but not working
i have de same error Preflash validation i tried with yours
mihaidenis said:
Can somebody help me?
After blankflash bootloader 411A* i can revive
my phone with any rom.
XT1032 moto g 2013.
Every time it gives error with:
Preflash validation failed or permission denied
I've try to blankflash again by forcing drivers
in win 10 to see it.
The device is seen (device manager)as qualcom 9008.
It doesn't do anything said waiting for device when i try to blankflash again.
So i am stuck in a crazy locked bootloader with
no partition on phone nothing.....
I've try to flash almost all available rom for it.
Same result,every time failed with permision denied
or partition downgraded for gpt
(blue letters warning)
or Preflash validation failed .....
Any idea how can i flash a moto or boot image of
any rom to revive it?
I am tired of trying so many.....
If i can make the phone be seen
by RSD lite i can try to flash thru it.
But is not recognize by any of
the RSD Lite versions....
I think i'm gonna bin it.
Thanks for any idea........
Oh,and the story behind....
Original:moto g 5.02 tesco firmware....
Unlocked bootloader.....
Flashed 4.4 GPE....OK
Updated OTA....bricked....
only seen in
PC as qulcomm.....
Next...bankflashed.....ok
Bootloader shows status locked
Phone booting in fastboot and that's it....
Click to expand...
Click to collapse
mihaidenis said:
Thank you!
I have try all above....
It looks like the blankflash locked the
bootloader (previously was unlocked)
and is not responding to
unlock it....even with the proper unlock key....
(permission denied)
That why i need an idea how to
blankflash/rewrite bootloader again.
I will post later on some screenshots with getvarall.
Click to expand...
Click to collapse
please reply if you got any suggestion
thank you
please help me to flash locked bootloader
mihaidenis said:
Yes,i sort it out, if other people having same problem need to flash only gpt.bin.
And this one extracted ONLY from 5.1 brazilian rom.
Any other procedure will not restore bootloader
to initial state.
After that you can flash any other compatible rom...
Thanks to all especially to Chalkydri who point me
to the brazilian rom.
Click to expand...
Click to collapse
The same issue i am facing here i am trying flash all version of gpt.bin file but no use it always shows bootloader unlock disabled and unknown partition name
please advise to rectifie it
Fortboy said:
please reply if you got any suggestion
thank you
Click to expand...
Click to collapse
Try some 5.1 brazilian rom.Google for it.
You must have XT1032 moto G for this to work.
And try flash whole rom.
Even if it gives you some errors you might be able to unlock bootloader to previous state....
Good luck!
Fortboy said:
please reply if you got any suggestion
thank you
Click to expand...
Click to collapse
Try some 5.1 brazilian rom.Google for it.
You must have XT1032 moto G for this to work.
And try flash whole rom.
Even if it gives you some errors you might be able to unlock bootloader to previous state....
Good luck!
Please put link here
mihaidenis said:
Yes,i sort it out, if other people having same problem need to flash only gpt.bin.
And this one extracted ONLY from 5.1 brazilian rom.
Any other procedure will not restore bootloader
to initial state.
After that you can flash any other compatible rom...
Thanks to all especially to Chalkydri who point me
to the brazilian rom.
Click to expand...
Click to collapse
hi i am facing the same issue here please let me know the which gpt.bin file was supported to you
Thank you in advance
Hi guys, I am Brazilian and user of xt1033, after an unfortunate downgrade, I caused a hard brick in my smart, the first time that happened I managed to recover without any problem by the post here of xda, but now I think I have the same problem the guy there, when I flash in 'flash5.1' gives some error and the process does not conclude, look:
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.016s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.300s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.084s]
writing 'motoboot'...
(bootloader) Motoboot: Unknown partition name
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.122s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe reboot-bootloader
rebooting into bootloader...
OKAY [ -0.000s]
finished. total time: -0.000s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>pause
Pressione qualquer tecla para continuar. . .
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.033s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.307s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.116s]
writing 'motoboot'...
(bootloader) Motoboot: Unknown partition name
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.147s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (1060 KB)...
OKAY [ 0.065s]
writing 'logo'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.102s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.385s]
writing 'boot'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.385s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.378s]
writing 'recovery'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.431s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash system system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (257535 KB)...
OKAY [ 8.674s]
writing 'system'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 8.689s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash system system.img_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (256925 KB)...
OKAY [ 8.623s]
writing 'system'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 8.676s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash system system.img_sparsechunk.2
target max-sparse-size: 256MB
sending 'system' (256980 KB)...
OKAY [ 8.651s]
writing 'system'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 8.689s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash system system.img_sparsechunk.3
target max-sparse-size: 256MB
sending 'system' (175936 KB)...
OKAY [ 5.933s]
writing 'system'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 5.986s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (49376 KB)...
OKAY [ 1.694s]
writing 'modem'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 1.726s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe erase modemst1
erasing 'modemst1'...
(bootloader) Invalid partition name modemst1
FAILED (remote failure)
finished. total time: 0.031s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe erase modemst2
erasing 'modemst2'...
(bootloader) Invalid partition name modemst2
FAILED (remote failure)
finished. total time: 0.053s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe flash fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (103 KB)...
OKAY [ 0.084s]
writing 'fsg'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.115s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe erase cache
erasing 'cache'...
(bootloader) Invalid partition name cache
FAILED (remote failure)
finished. total time: 0.047s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe erase userdata
erasing 'userdata'...
(bootloader) Invalid partition name userdata
FAILED (remote failure)
finished. total time: 0.053s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe oem fb_mode_clear
...
OKAY [ -0.000s]
finished. total time: -0.000s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>mfastboot.exe reboot-bootloader
rebooting into bootloader...
OKAY [ 0.016s]
finished. total time: 0.016s
C:\Users\Eduardo\Desktop\HARDBRICK MOTO G 2013>pause
Pressione qualquer tecla para continuar. . .
I tried several ways to install the stock but without success, and I also tried to unlock the boatloader and also failed, I tried to install another version of the boatloader and without success. I'm sorry for my bad english, I'm using google translator to talk to you. And sorry if I did something wrong, this is the first time I participate in a forum here.
This smart is my main device and I really need it, if you can help me, I thank you very much.
Hey guys, I've the same problem with the XT1032 model. My phone was bricked 4 days ago, and I tried to flash a 5.0.2 Retail US with a 41.1A Bootloader, after to flash this motoboot.img, I can't flash anything. All the times appears this same message:
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition
My bootloader is corrupt :crying:
I don't know how to solve this problem, I've tried flashing with 9-10 ROM's for my model, and all times appears this message, I tried in 3 different PC's. Anybody did solve this problem?
Hello,
Someone succeed ? If yes how ?
Thanks
please reply urgently .if anyone got any suggestion. Please
mihaidenis said:
Thank you!
I have try all above....
It looks like the blankflash locked the
bootloader (previously was unlocked)
and is not responding to
unlock it....even with the proper unlock key....
(permission denied)
That why i need an idea how to
blankflash/rewrite bootloader again.
I will post later on some screenshots with getvarall.
Click to expand...
Click to collapse
Same here and what's intriguing is that now the BL version is 0.5 with unknown Baseband. Whereas before blankflashing it was 2.7 with a baseband. Tried everything like you but without a working baseband, I can flash ROMs but no cellular connectivity. SIM cards turn out disabled
Related
Hello Folks:
This comes after a bit of struggle to get this Moto G XT1132 Retail version to stock. For some weird reason the phone refused to boot after factory wipe via CWM..That shouldn't have happened in the first case. But **** happens and that's XDA helps the troubled users. There is still shortage of complete toolkits with full features around for Moto G not privileged like Nexus 4 or Nexus 5 yet..
Symptoms :
1. Moto G refuse to start and STUCK at boot / bootloop.
2. Normal fastboot commands upsets you by not flashing system.img or any other stock firmware files.
Solution:
1. Edit the RETAIL-GB_4.4.2_KLB20.9-1.10-1.9_cid7_CFC_1FF_v5_SVC.txt (its an xml file though) as attached with this post.(You just need to remove one line from the top; don't worry if your .xml looks different from this one; as I have taken this as an example)
2. Get your firmware from here : http://sbf.droid-developers.org/phone.php?device=14
3. Download the flash.txt file from this post rename it to flash.bat (its very important) put this in the extracted folder of your firmware.
4. Copy all the fastboot files in the extracted firmware folder along with the flash.bat
5. Rename the fastboot.exe to > fastboot-moto-windows.exe
6. Put your Moto G to bootloader mode
7. Click on the flash.bat file which is in the firmware extracted folder. It will do its stuff and may take few seconds. When the script stops just reboot the phone. And you are back to stock with no bootloop.
NOTE: You are on your own. I take no responsibility for any device getting bricked or whatsoever.
I take NO Credit for this and I have just gathered this information from various forums including XDA. I have just tried to put them at one place to make it Frustration Free...
If I helped you Hit the Thanks button down there...
I specially thank tillaz for the batch file which is a key tool to fix the mess
Good Luck
Reserved
reserved...:cyclops:
Mkdon said:
Hello Folks:
This comes after a bit of struggle to get this Moto G XT1132 Retail version to stock. For some weird reason the phone refused to boot after factory wipe via CWM..That shouldn't have happened in the first case. But **** happens and that's XDA helps the troubled users. There is still shortage of complete toolkits with full features around for Moto G not privileged like Nexus 4 or Nexus 5 yet..
Symptoms :
1. Moto G refuse to start and STUCK at boot / bootloop.
2. Normal fastboot commands upsets you by not flashing system.img or any other stock firmware files.
Solution:
1. Edit the RETAIL-GB_4.4.2_KLB20.9-1.10-1.9_cid7_CFC_1FF_v5_SVC.txt (its an xml file though) as attached with this post.(You just need to remove one line from the top; don't worry if your .xml looks different from this one; as I have taken this as an example)
2. Get your firmware from here : http://sbf.droid-developers.org/phone.php?device=14
3. Download the flash.txt file from this post rename it to flash.bat (its very important) put this in the extracted folder of your firmware.
4. Copy all the fastboot files in the extracted firmware folder along with the flash.bat
5. Rename the fastboot.exe to > fastboot-moto-windows.exe
6. Put your Moto G to bootloader mode
7. Click on the flash.bat file which is in the firmware extracted folder. It will do its stuff and may take few seconds. When the script stops just reboot the phone. And you are back to stock with no bootloop.
NOTE: You are on your own. I take no responsibility for any device getting bricked or whatsoever.
I take NO Credit for this and I have just gathered this information from various forums including XDA. I have just tried to put them at one place to make it Frustration Free...
If I helped you Hit the Thanks button down there...
I specially thank tillaz for the batch file which is a key tool to fix the mess
Good Luck
Click to expand...
Click to collapse
worked!!!!!!!!
you sir... are a legend!!!!!!!!!
thank you so much!!!!
flowerpoweruk said:
worked!!!!!!!!
you sir... are a legend!!!!!!!!!
thank you so much!!!!
Click to expand...
Click to collapse
I am glad it helped you. Enjoy the amazing device.
my phone german retail. can i use this tutorial?
sinkadorable said:
my phone german retail. can i use this tutorial?
Click to expand...
Click to collapse
I think so. Just give a shot. if it doesnt work then just replace the stock firmware from GB to DE. Alles Beste!
it gives me the same as the original method " < waiting for device > "
i have made a full swipe to the phone, cleaned the previous custom rom already, and a have cwm recovery.. dont know if this info is important
DONE!! i havent put the adb files in the firmware folder, but has flashed flawlessly now!! thank you for this solution!! :good:
Xin_TiGeR said:
it gives me the same as the original method " < waiting for device > "
i have made a full swipe to the phone, cleaned the previous custom rom already, and a have cwm recovery.. dont know if this info is important
Click to expand...
Click to collapse
What would you like to achieve? / is your Moto G stuck in loop after factory reset? Give a full background about the issue
Thank you.It works.Excellent.
Mkdon said:
1. Edit the RETAIL-GB_4.4.2_KLB20.9-1.10-1.9_cid7_CFC_1FF_v5_SVC.txt (its an xml file though) as attached with this post.(You just need to remove one line from the top; don't worry if your .xml looks different from this one; as I have taken this as an example)
Click to expand...
Click to collapse
What is meant by this ? what exactly am I removing ? Do I need to rename it to the firmware I am about to flash?
Cheers.
EDIT: I figured it out, I just had a noob moment in my despair and couldn't take the information in, What a difference some nicotine and a cuppa makes!
Thanks OP great work.
Mkdon said:
Hello Folks:
This comes after a bit of struggle to get this Moto G XT1132 Retail version to stock. For some weird reason the phone refused to boot after factory wipe via CWM..That shouldn't have happened in the first case. But **** happens and that's XDA helps the troubled users. There is still shortage of complete toolkits with full features around for Moto G not privileged like Nexus 4 or Nexus 5 yet..
Symptoms :
1. Moto G refuse to start and STUCK at boot / bootloop.
2. Normal fastboot commands upsets you by not flashing system.img or any other stock firmware files.
Solution:
1. Edit the RETAIL-GB_4.4.2_KLB20.9-1.10-1.9_cid7_CFC_1FF_v5_SVC.txt (its an xml file though) as attached with this post.(You just need to remove one line from the top; don't worry if your .xml looks different from this one; as I have taken this as an example)
2. Get your firmware from here : http://sbf.droid-developers.org/phone.php?device=14
3. Download the flash.txt file from this post rename it to flash.bat (its very important) put this in the extracted folder of your firmware.
4. Copy all the fastboot files in the extracted firmware folder along with the flash.bat
5. Rename the fastboot.exe to > fastboot-moto-windows.exe
6. Put your Moto G to bootloader mode
7. Click on the flash.bat file which is in the firmware extracted folder. It will do its stuff and may take few seconds. When the script stops just reboot the phone. And you are back to stock with no bootloop.
NOTE: You are on your own. I take no responsibility for any device getting bricked or whatsoever.
I take NO Credit for this and I have just gathered this information from various forums including XDA. I have just tried to put them at one place to make it Frustration Free...
If I helped you Hit the Thanks button down there...
I specially thank tillaz for the batch file which is a key tool to fix the mess
Good Luck
Click to expand...
Click to collapse
help me guys
2 days back I was using my fone and it juz went off blank screen. tried many times with power button bt nothing. den went it to fastboot mode and tried recovery/normal powerup/factory but everytime got msg "failed to validate system image". followed d procedure given here http://forum.xda-developers.com/showthread.php?t=2700502 and got this result
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd..
C:\Windows>cd..
C:\>g:
G:\>cd moto g
G:\moto g>mfastboot.exe oem lock begin
...
(bootloader) Device is already locked!
OKAY [ 0.014s]
finished. total time: 0.016s
G:\moto g>mfastboot.exe flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 5.001s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 10.396s
G:\moto g>mfastboot.exe flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1940 KB)...
OKAY [ 5.112s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) Failed to erase partition
(bootloader) Failed to flash tz
FAILED (remote failure)
finished. total time: 11.343s
G:\moto g>mfastboot.exe flash logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (619 KB)...
OKAY [ 5.059s]
writing 'logo'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition logo
FAILED (remote failure)
finished. total time: 10.084s
G:\moto g>mfastboot.exe flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 5.554s]
writing 'boot'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition boot
FAILED (remote failure)
finished. total time: 11.077s
G:\moto g>mfastboot.exe flash recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 5.532s]
writing 'recovery'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition recovery
FAILED (remote failure)
finished. total time: 11.061s
G:\moto g>mfastboot.exe flash system system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (262142 KB)...
OKAY [ 19.204s]
writing 'system'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 33.653s
G:\moto g>mfastboot.exe flash system system.img_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (237949 KB)...
OKAY [ 17.387s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 25.518s
G:\moto g>mfastboot.exe flash system system.img_sparsechunk.2
target max-sparse-size: 256MB
sending 'system' (243326 KB)...
OKAY [ 18.015s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 34.875s
G:\moto g>mfastboot.exe flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (47476 KB)...
OKAY [ 7.540s]
writing 'modem'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition modem
FAILED (remote failure)
finished. total time: 12.576s
G:\moto g>mfastboot.exe erase modemst1
erasing 'modemst1'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 9.987s
G:\moto g>mfastboot.exe erase modemst2
erasing 'modemst2'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 9.990s
G:\moto g>mfastboot.exe flash fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (102 KB)...
OKAY [ 5.056s]
writing 'fsg'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition fsg
FAILED (remote failure)
finished. total time: 10.090s
G:\moto g>mfastboot.exe erase cache
erasing 'cache'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 9.990s
G:\moto g>mfastboot.exe erase userdata
erasing 'userdata'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 9.995s
G:\moto g>mfastboot.exe oem lock
...
(bootloader) Device is already locked!
OKAY [ 0.012s]
finished. total time: 0.015s
G:\moto g>pause
Press any key to continue . .
any solution guys
Don't you need to be unlocked to flash it?
Sent from my XT1032 using XDA Free mobile app
feartheanonymity said:
Don't you need to be unlocked to flash it?
Sent from my XT1032 using XDA Free mobile app
Click to expand...
Click to collapse
does unlocking void the warranty?
yasir1234 said:
does unlocking void the warranty?
Click to expand...
Click to collapse
Yes, However you can flash to stock and just relock the bootloader and warranty is back intact.
26286998 5107
feartheanonymity said:
Yes, However you can flash to stock and just relock the bootloader and warranty is back intact.
Click to expand...
Click to collapse
how do I do dat?can u pls give me steps to do so..
well there are many threads explaining how to unlock bootloader, It basically consists of getting a code through adb, putting that code onto motorola website, getting the code and sending it to the phone. check the guides in the general section.
as for relocking it, is as simple as going into fastboot and typing (in adb / fastboot) fastboot oem lock.
Moto G Stuck in Boot Loop! Help
When I flash the stock firmware I keep getting these error messages
(bootloader) Invalid signed image
(bootloader) Preflash validation failed
(bootloader) Failed to validate sparse image
and these all end with
FAILED (remote failure)
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.035s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.448s]
finished. total time: 0.486s
target reported max download size of 536870912 bytes
sending 'motoboot' (1940 KB)...
OKAY [ 0.111s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 1.490s]
finished. total time: 1.603s
rebooting into bootloader...
OKAY [ 0.004s]
finished. total time: 0.005s
target reported max download size of 536870912 bytes
sending 'boot' (10240 KB)...
OKAY [ 0.361s]
writing 'boot'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.915s
target reported max download size of 536870912 bytes
sending 'recovery' (10240 KB)...
OKAY [ 0.372s]
writing 'recovery'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.948s
target reported max download size of 536870912 bytes
sending 'system' (260606 KB)...
OKAY [ 8.415s]
writing 'system'...
(bootloader) Invalid signed image
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 8.950s
target reported max download size of 536870912 bytes
sending 'system' (239692 KB)...
OKAY [ 7.770s]
writing 'system'...
OKAY [ 9.293s]
finished. total time: 17.065s
target reported max download size of 536870912 bytes
sending 'system' (222205 KB)...
OKAY [ 7.165s]
writing 'system'...
(bootloader) Failed to validate sparse image
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 19.684s
target reported max download size of 536870912 bytes
sending 'modem' (47484 KB)...
OKAY [ 1.583s]
writing 'modem'...
OKAY [ 1.304s]
finished. total time: 2.890s
erasing 'modemst1'...
OKAY [ 0.066s]
finished. total time: 0.067s
erasing 'modemst2'...
OKAY [ 0.067s]
finished. total time: 0.068s
target reported max download size of 536870912 bytes
sending 'fsg' (721 KB)...
OKAY [ 0.125s]
writing 'fsg'...
OKAY [ 0.104s]
finished. total time: 0.231s
erasing 'cache'...
OKAY [ 0.362s]
finished. total time: 0.364s
erasing 'userdata'...
OKAY [ 2.560s]
finished. total time: 2.562s
I have tried to flash many different firmwares on it to get it out of the boot loop like "US Retail" (4.3 and 4.4.2), "Boost US" (4.3 and 4.4.2), and "Verizon US" (4.3 and 4.4.2). This always results in one of the 3 error messages or more. I have found the one that works with the least error messages is the Boost US firmware for 4.4.2 and it gives only the error message (bootloader) Failed to validate sparse image on the 3rd system file. Whenever I try to install the firmware it doesn't seem to work, and it results in the phone turning on with the Motorola logo then the phone vibrates once then turns off and repeats, or the phone shows the android logo on its back with the exclamation point after the single vibration and sits like that until it turns off a few minutes later repeating the process. I have tried everything including trying to boot normally, resetting to factory, going into recovery and wiping cache and deleting all data, and even attempting to install from ADB. I have actually successfully done this process before a few hours before trying it on this one where it ended up like this. I looked this up and apparently you can still fix the phone if it can reach the boot loader screen, but when I was working with the phone I forgot to put it in developer mode and turn on USB debugging so that might be an issue. If there is a way I could fix it that would be very helpful, but if it doesn't I can still return the phone in the next 4 days.
Thanks for the help!
Extra Info:
The phone's bootloader is locked and because it is new I do not have any backups.
Also I already have these following programs
Minimal ADB and Fastboot
RSD Lite
DFS
Mfastboot v2
r1-motog-modifiedrecoveryroot.zip
adt-bundle-windows-x86_64-20140321.zip
platform-tools.zip
Fastboot+ADB(20926).zip
adbfix.zip
These are all from other threads that have explained this issue but the fix they provided did not work.
Thanks Again!
Guys, I have a Moto-G that was sold to me as a XT-1032 US global GSM model. The guy who sold it to me said that after the OTA update for 4.4.2 was applied to his phone it never would see a signal again, and kept saying to turn off airplane even though it saw that a sim was installed. looking at the status it kept saying the radio was turned off. When I got it from him it was showing the unlocked bootloader message, but when I checked the status on the fastboot screen it was showing locked status 2, which indicates it had never been unlocked. I unlocked the bootloader and started trying different versions of the firmware to see if I could fix the issue, but nothing ever worked until I tried this method.
I only flashed the radio from the GB 4.4.2 version that the OP had provided the XML file for using the modified xml file he provided, and now my cell radio is working again. Since I had already voided any warranty on it, I went ahead with flashing the CWM recovery and the latest nightly for CM11 and it's working beautifully, very smooth. I had bought this for my wife if I could fix it, so now she's getting a nice upgrade from her old GSM galaxy nexus that had started developing issues where it had to be rebooted to get the radio to work again (on the stock 4.3 firmware mind you, just a hardware problem I think due to it's age)
So in short Thanks OP!!
Mkdon said:
1. Edit the RETAIL-GB_4.4.2_KLB20.9-1.10-1.9_cid7_CFC_1FF_v5_SVC.txt (its an xml file though) as attached with this post.(You just need to remove one line from the top; don't worry if your .xml looks different from this one; as I have taken this as an example)
Click to expand...
Click to collapse
Thanks for posting this since my phone is having these exact issues! I was a little unsure of what you meant in step 1 above, so what I did is take the sample XML which you attached to the post and replaced the software version info in the header with the version information for my carrier's firmware. Not sure if that was what I was supposed to do. Anyway, everything works great except that it is failing to flash motoboot.img. The command windows says it's a remote error- preflash validation failed, and the phone displays an error that says the version has been downgraded for tz. Any ideas would be greatly appreciated!
Hi! i've been a long time lurker of the site for a couple of years now, I've happily been able to solve almost all of my problems just by searching the forums. but know I have no idea what to do, so i made an account and see if anyone has any insight on this
Here's the rundown:
recently bought a used moto g and started playing around with it and when i tried to upgrade the firmware manually. i kinda bricked it.
right now it's stuck on the bootloader screen (the one with AP fastboot flash mode (S))
my device is locked, from what i understand this particular model of moto g, the AIO wireless one, can't be bootloader unlocked.
i tried flashing US_retail_XT1032_KXB21.14-L1.32_CFC using the guide on [GUIDE] Moto G - Restore stock firmware
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
those commands worked correctly, but the next one,
mfastboot flash boot boot.img gives me the following error
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.354s]
writing 'boot'...
(bootloader) Preflash validation
FAILED (remote failure)
finished. total time: 0.850s
On the phone it says "hab check failed for boot"
after about an hour of research i was able to figure out which firmware was the original one, using the getvar all command, and it gives me this one
motorola/falcon_aio/falcon_umts:4.
4.2/KXB20.9-1.10-1.9/12:user/bldac
fg,release-keys
: Blur_Version.173.44.9.falcon_umts
: .AIO.en.US
now i was able to get that firmware after a while, and i tried to reflash it to the phone, but now i get these errors
mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.071s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.458s
on the phone it says "version downgraded for primary_gpt"
on the next command i get this
mfastboot flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1940 KB)...
OKAY [ 0.147s]
writing 'motoboot'...
(bootloader) Motoboot: Preflash validation for tz
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.493s
and on the phone it says "version downgraded for tz"
the logo flashes fine , but boot gives me another error
mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.401s]
writing 'boot'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.916s
and the phone says "version downgraded for boot"
now ive tried pretty much all the 4.4.2 retail US and 4.4.3 retail US firmwares and i get the same errors, or a combination of them
i have no idea what to do now, and i cant seem to find a 4..4.3 firmware for AIO wireless, and there does not seem to be one
does anybody has some information to signal me in the right direction? i'm afraid i just bricked it, and i barely even used it lol
I have a bootloader unlocked XT1032 MOTO G on UK EE network. I have been trying to flash stock 4.4.4 (so that I can upgrade to OTA lollipop) but am getting a 'Preflash validation failed error'.
I've tried various things to get it to flash the images but nothing has worked.
Can anyone suggest how I might get this work?
Code:
C:\motog>mfastboot oem lock begin
...
(bootloader) Ready to flash signed images
OKAY [ 1.660s]
finished. total time: 1.660s
C:\motog>mfastboot oem lock begin
...
(bootloader) Ready to flash signed images
OKAY [ 1.646s]
finished. total time: 1.647s
C:\motog>mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.031s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.374s
Just skip flashing the gpt.bin and motoboot.img but flash the rest. The phone should still work.
audit13 said:
Just skip flashing the gpt.bin and motoboot.img but flash the rest. The phone should still work.
Click to expand...
Click to collapse
Thanks for the suggestion, however there's others that fail too:
boot.img won't flash
Recovery does flash but I get the broken android with 'No command' message when trying to boot to recovery
System images won't flash
Code:
C:\motog>mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.372s]
writing 'boot'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.840s
C:\motog>mfastboot flash recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.372s]
writing 'recovery'...
OKAY [ 0.966s]
finished. total time: 1.645s
C:\motog>mfastboot flash system system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (259277 KB)...
OKAY [ 8.643s]
writing 'system'...
(bootloader) Invalid signed image
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 9.082s
It will still boot normally after that. Any ideas?
Crazy question but are you sure you are flashing the correct rom for your phone? Was it on gpe before?
audit13 said:
Crazy question but are you sure you are flashing the correct rom for your phone? Was it on gpe before?
Click to expand...
Click to collapse
I'm pretty sure I am. I did try and convert to GPE using the AIO tool (when trying to resolve the issues) but I've seen nothing to suggest this has actually worked.
The phone has previously been rooted, but isn't currently.
System version is showing as:
210.12.40.falcon_umts.EESL.en.GB
Build number:
KXB21.14-L1.40
Kernel version:
3.4.42-gb89c9dd
[email protected] #1
Fri Jun 20 07:09:11 CDT 2014
Thanks for the help, it's very much appreciated!
@audit13
Update for lollipop in moto G Don´t work, ota Says "Updated"
HELP..
Same problem here preflash validation failed for Logo, GPT and Motoboot
(Downgrade from Lollipop 5.1 (XD1039 RETBR) To Kitkat 4.4.4
BOOOTLOADER is Unlocked.
hey guys,
I used a youtube video and I did a thing with 5.x to 4.4.4 gpe but after my phone just doesn't boot up.
Do I have a bricked phone? It's Stuck at the bootloader menu with the error ''Boot up failed'' please help!!!
(sorry for bad english)
Be careful with downgrading. What model Moto G do you have?
lost101 said:
Be careful with downgrading. What model Moto G do you have?
Click to expand...
Click to collapse
I have moto g 4g version the 1st gen
and I think it didn't was a downgrade. my phone was 4.4.4 kitkat. it was really dumb of me to do this
poolta321 said:
I have moto g 4g version the 1st gen
and I think it didn't was a downgrade. my phone was 4.4.4 kitkat. it was really dumb of me to do this
Click to expand...
Click to collapse
I already tried to flash TWRP, CWM and Philz but it didn't work it still said Boot up failed
poolta321 said:
I have moto g 4g version the 1st gen
and I think it didn't was a downgrade. my phone was 4.4.4 kitkat. it was really dumb of me to do this
Click to expand...
Click to collapse
The safest thing would be to flash a custom recovery and then a ROM zip.
TWRP custom Recovery: https://www.androidfilehost.com/?fid=95916177934553450
Stock KitKat ROM zips: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688
Stock Lollipop ROM zips: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510
--
To flash TWRP use the fastboot command: fastboot flash recovery twrp-2.8.6.0-falcon.img
You can then use ADB to transfer or sideload a ROM zip to phone for flashing.
Related tutorial: http://forum.xda-developers.com/moto-g/general/twrp-adb-sideloading-tutorial-t3006563
EDIT: Since you just updated the post to state you have a 4G Moto G - do not flash non-4G ROMs or firmware images - that includes GPE!
lost101 said:
The safest thing would be to flash a custom recovery and then a ROM zip.
TWRP custom Recovery: https://www.androidfilehost.com/?fid=95916177934553450
Stock KitKat ROM zips: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688
Stock Lollipop ROM zips: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510
--
To flash TWRP use the fastboot command: fastboot flash recovery twrp-2.8.6.0-falcon.img
You can then use ADB to transfer or sideload a ROM zip to phone for flashing.
Related tutorial: http://forum.xda-developers.com/moto-g/general/twrp-adb-sideloading-tutorial-t3006563
Click to expand...
Click to collapse
Already tried to flash TWRP but still says Boot up failed when I go to recovery.
(my phone has a SD card slot)
poolta321 said:
Already tried to flash TWRP but still says Boot up failed when I go to recovery.
(my phone has a SD card slot)
Click to expand...
Click to collapse
You should only be flashing ROMs / Firmware / Recoveries available here: http://forum.xda-developers.com/moto-g/4g-development
lost101 said:
You should only be flashing ROMs / Firmware / Recoveries available here: http://forum.xda-developers.com/moto-g/4g-development
Click to expand...
Click to collapse
yes I know but when I flash TWRP and I go to recovery it says boot up failed
poolta321 said:
yes I know but when I flash TWRP and I go to recovery it says boot up failed
Click to expand...
Click to collapse
I'm going to assume you have flashed the XT1032 partition table (gpt.bin) - that could be the cause.
If you flash the full Factory Firmware image, that should fix everything.
4G Firmare images: http://forum.xda-developers.com/moto-g/4g-development/xt1039-moto-g-4g-stock-firmware-kxb21-t2805619
Fastboot tutorial: http://forum.xda-developers.com/showthread.php?t=2542219
lost101 said:
I'm going to assume you have flashed the XT1032 partition table (gpt.bin) - that could be the cause.
If you flash the full Factory Firmware image, that should fix everything.
4G Firmare images: http://forum.xda-developers.com/moto-g/4g-development/xt1039-moto-g-4g-stock-firmware-kxb21-t2805619
Fastboot tutorial: http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
Tried the 4G tutorial before... it didn't work
poolta321 said:
Tried the 4G tutorial before... it didn't work
Click to expand...
Click to collapse
but im going to try this again.
what is the difference with retial europe and orange europe?
poolta321 said:
but im going to try this again.
what is the difference with retial europe and orange europe?
Click to expand...
Click to collapse
I'm also being helped here http://forum.xda-developers.com/moto-g/help/stuck-boot-failed-t3104617
poolta321 said:
but im going to try this again.
what is the difference with retial europe and orange europe?
Click to expand...
Click to collapse
Orange version is one created for the network / carrier called Orange.
Do the fastboot commands manually, one at a time, and post a complete log here if the process is not successful.
lost101 said:
Orange version is one created for the network / carrier called Orange.
Do the fastboot commands manually, one at a time, and post a complete log here if the process is not successful.
Click to expand...
Click to collapse
Okay I'm gonna do that. but first I need to download the file and it says that it takes 2 hours to finish
(Slow internet connection)
poolta321 said:
Okay I'm gonna do that. but first I need to download the file and it says that it takes 2 hours to finish
(Slow internet connection)
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-g/help/stuck-boot-failed-t3104617/post60653710#post60653710
I heard that I hard bricked my phone:crying:
poolta321 said:
http://forum.xda-developers.com/moto-g/help/stuck-boot-failed-t3104617/post60653710#post60653710
I heard that I hard bricked my phone:crying:
Click to expand...
Click to collapse
If the phone turns on and shows the fastboot screen, it's not hard-bricked to me. Proceed as I suggested.
lost101 said:
If the phone turns on and shows the fastboot screen, it's not hard-bricked to me. Proceed as I suggested.
Click to expand...
Click to collapse
yes but he said that the bootloader was messed up and that there was no way to fix it
poolta321 said:
yes but he said that the bootloader was messed up and that there was no way to fix it
Click to expand...
Click to collapse
I read what he said, but I do not agree. I suggest you do as I describe above.
lost101 said:
I read what he said, but I do not agree. I suggest you do as I describe above.
Click to expand...
Click to collapse
Okay so what do I need to do?
(I'm away for a while)
poolta321 said:
Okay so what do I need to do?
(I'm away for a while)
Click to expand...
Click to collapse
Okay I'm back. and I did what you said but it didn't work. when I turn on my phone it says: Fastboot Reason: Fall-trough from normal boot mode.
Here is the cmd log:
G:\Program Files\SDK\platform-tools>mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.028s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.328s
G:\Program Files\SDK\platform-tools>mfastboot flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.095s]
writing 'motoboot'...
(bootloader) Motoboot: Preflash validation for tz
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.366s
G:\Program Files\SDK\platform-tools>mfastboot flash logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (1060 KB)...
OKAY [ 0.073s]
writing 'logo'...
OKAY [ 0.140s]
finished. total time: 0.218s
G:\Program Files\SDK\platform-tools>mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.372s]
writing 'boot'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.841s
G:\Program Files\SDK\platform-tools>mfastboot flash recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.381s]
writing 'recovery'...
OKAY [ 0.964s]
finished. total time: 1.348s
G:\Program Files\SDK\platform-tools>mfastboot flash system system.img_sparsechun
k.0
target max-sparse-size: 256MB
sending 'system' (260841 KB)...
OKAY [ 8.458s]
writing 'system'...
(bootloader) Invalid signed image
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 8.851s
G:\Program Files\SDK\platform-tools>mfastboot flash system system.img_sparsechun
k.1
target max-sparse-size: 256MB
sending 'system' (236285 KB)...
OKAY [ 7.760s]
writing 'system'...
(bootloader) Invalid signed image
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 7.827s
G:\Program Files\SDK\platform-tools>mfastboot flash system system.img_sparsechun
k.2
target max-sparse-size: 256MB
sending 'system' (257383 KB)...
OKAY [ 8.364s]
writing 'system'...
(bootloader) Invalid signed image
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 8.437s
G:\Program Files\SDK\platform-tools>mfastboot flash system system.img_sparsechun
k.3
target max-sparse-size: 256MB
sending 'system' (33384 KB)...
OKAY [ 1.163s]
writing 'system'...
(bootloader) Invalid signed image
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.236s
G:\Program Files\SDK\platform-tools>mfastboot flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (59132 KB)...
OKAY [ 2.200s]
writing 'modem'...
OKAY [ 2.831s]
finished. total time: 5.037s
G:\Program Files\SDK\platform-tools>mfastboot erase modemst1
erasing 'modemst1'...
OKAY [ 0.026s]
finished. total time: 0.029s
G:\Program Files\SDK\platform-tools>mfastboot erase modemst2
erasing 'modemst2'...
OKAY [ 0.088s]
finished. total time: 0.090s
G:\Program Files\SDK\platform-tools>mfastboot flash fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (661 KB)...
OKAY [ 0.107s]
writing 'fsg'...
OKAY [ 5.061s]
finished. total time: 5.170s
G:\Program Files\SDK\platform-tools>mfastboot erase cache
erasing 'cache'...
OKAY [ 0.103s]
finished. total time: 0.105s
G:\Program Files\SDK\platform-tools>mfastboot erase userdata
erasing 'userdata'...
OKAY [ 0.218s]
finished. total time: 0.219s
G:\Program Files\SDK\platform-tools>mfastboot reboot
rebooting...
finished. total time: 0.003s
I flashed the cm14.1 and gapps, worked fine... then i flashed the Google assistant zip on my moto g xt1033. After that, it would not boot up to anything.. I tried getting it into recovery but simply no response... when i press the power button for longer, it just shows the white page and the unlock bootloader details... then turns off back again.... then i try to get it into recovery, same situation... Whattodo?
Before this, to install the animated nav bar, i got the SYSTEMUI pk, modified its rw permissions as given ( http://forum.xda-developers.com/moto-g/general/cm-14-1-pixel-nav-animation-button-moto-t3509255 ) here and followed the same thing,, the navbar showed up with no problems and i used it with no problems at all.....
Please suggest a solution....
(awkwardly enough, i am experiencing it a little warm even after i'ts been close to 30-40 mins after is shut itself off)
can u access Bootloader menu?
jbanti said:
can u access Bootloader menu?
Click to expand...
Click to collapse
Yes i can access bootloader menu, sorry i took so late to reply because i was on a short trip lol..
SO, i just started it back by connecting it to PC via USb and it shows battery low(charging).
The bootloader is 41.1A(*)
Charge it for 4 hours and flash stock ROM using mfastboot from your PC.
Or flash TWRP from your PC, wipe all partitions, reboot and flash again CM+gapps.
In addition to what others have suggested, you can follow the instructions on the link posted below. Basically, you would unzip the file on your computer, boot into bootloader on your phone and run the 1-step bat file. After a few minutes, you will automatically be on 4.4.4. It is easy to re-root and flash a recovery (I used Philz, which offers you the ability to root in its reboot menu). Lastly, I updated the twrp to the latest and flashed a new ROM.
https://forum.xda-developers.com/showthread.php?t=2969729
Sent from my Moto G using Tapatalk
taadow1030 said:
In addition to what others have suggested, you can follow the instructions on the link posted below. Basically, you would unzip the file on your computer, boot into bootloader on your phone and run the 1-step bat file. After a few minutes, you will automatically be on 4.4.4. It is easy to re-root and flash a recovery (I used Philz, which offers you the ability to root in its reboot menu). Lastly, I updated the twrp to the latest and flashed a new ROM.
https://forum.xda-developers.com/showthread.php?t=2969729
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
OK just to give you some information:
So this is what happening to me:
I flashed wrong files on my moto g. I think the files i flashed on my moto g were of Moto G3 or something. So my phone was stuck in bootloader rebooting.
I gave it to a shop and he got it back to kitkat with a flickering screen. Then i got the OTA and i was updating it to lollipop via OTA. It then went off., i dont know what happened but it would not even turn on by pressing power button. Then i connected it to a charger and notification light was blinking. Eventually, i got here and tried the procedure. So my mobile was recognised as qhsusb_bulk and then i followed the procedure further and then it was also recognised as qualcomm 9008 etc.
I flashed the blankflash and my bootloader screen showed up with a bootloader of 41.1A(*). Device is locked. Status code:0.
so when it comes in fastboot it shows:
Fastboot reason:Failed to initialize partition table
USB connected.
Now i tried to flash stock rom
mfastboot flash boot boot.img
fastboot flash reocovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
E:\MOTO G ROOT\MOTO G LOLLIPOP 5.0.2 NOV 15>mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.395s]
writing 'boot'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.414s
E:\MOTO G ROOT\MOTO G LOLLIPOP 5.0.2 NOV 15>mfastboot flash reocovery recovery.i
mg
target max-sparse-size: 256MB
sending 'reocovery' (10240 KB)...
OKAY [ 0.359s]
writing 'reocovery'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.384s
E:\MOTO G ROOT\MOTO G LOLLIPOP 5.0.2 NOV 15>mfastboot flash system system.img_sp
arsechunk.0
target max-sparse-size: 256MB
sending 'system' (257883 KB)...
OKAY [ 8.497s]
writing 'system'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 8.500s
E:\MOTO G ROOT\MOTO G LOLLIPOP 5.0.2 NOV 15>mfastboot flash system system.img_sp
arsechunk.1
target max-sparse-size: 256MB
sending 'system' (256782 KB)...
OKAY [ 8.439s]
writing 'system'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 8.459s
E:\MOTO G ROOT\MOTO G LOLLIPOP 5.0.2 NOV 15>mfastboot flash system system.img_sp
arsechunk.2
target max-sparse-size: 256MB
sending 'system' (260098 KB)...
OKAY [ 8.633s]
writing 'system'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 8.648s
E:\MOTO G ROOT\MOTO G LOLLIPOP 5.0.2 NOV 15>mfastboot flash system system.img_sp
arsechunk.3
target max-sparse-size: 256MB
sending 'system' (160376 KB)...
OKAY [ 5.360s]
writing 'system'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 5.395s
E:\MOTO G ROOT\MOTO G LOLLIPOP 5.0.2 NOV 15>mfastboot flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (49356 KB)...
OKAY [ 1.653s]
writing 'modem'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 1.666s
E:\MOTO G ROOT\MOTO G LOLLIPOP 5.0.2 NOV 15>mfastboot erase modemst1
erasing 'modemst1'...
(bootloader) Invalid partition name modemst1
FAILED (remote failure)
finished. total time: 0.016s
E:\MOTO G ROOT\MOTO G LOLLIPOP 5.0.2 NOV 15>mfastboot erase modemst2
erasing 'modemst2'...
(bootloader) Invalid partition name modemst2
FAILED (remote failure)
finished. total time: 0.024s
E:\MOTO G ROOT\MOTO G LOLLIPOP 5.0.2 NOV 15>mfastboot flash fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (102 KB)...
OKAY [ 0.067s]
writing 'fsg'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.105s
E:\MOTO G ROOT\MOTO G LOLLIPOP 5.0.2 NOV 15>mfastboot erase cache
erasing 'cache'...
(bootloader) Invalid partition name cache
FAILED (remote failure)
finished. total time: 0.058s
E:\MOTO G ROOT\MOTO G LOLLIPOP 5.0.2 NOV 15>mfastboot erase userdata
erasing 'userdata'...
(bootloader) Invalid partition name userdata
FAILED (remote failure)
finished. total time: 0.011s
E:\MOTO G ROOT\MOTO G LOLLIPOP 5.0.2 NOV 15>mfastboot reboot
rebooting...
finished. total time: 0.003s
E:\MOTO G ROOT\MOTO G LOLLIPOP 5.0.2 NOV 15>
WHAT DO I DO NOW? PLEASE HELP.
(I KNOW I MADE A SPELLING MISTAKE IN FLASHING RECOVERY, BUT ANYWAYS WHEN I DO IT RIGHT, THE PHONE WOULD NOT WORK, ONLY BOOTS IN BOOTLOAER)
moralesnery said:
Charge it for 4 hours and flash stock ROM using mfastboot from your PC.
Or flash TWRP from your PC, wipe all partitions, reboot and flash again CM+gapps.
Click to expand...
Click to collapse
Following the brick, i gave my phone to repair in a shop. I got it back on kitkat. So i eventually got the OTA. then i updated to the OTA and my phone went off half-way. Now it just reboots to the bootloader and has notice :
Fastboot reason: Failed to initialize partition table
Believe it or not, when i attempted to use mfastboot commands, mine didn't work either. I'm not sure what went wrong, as all of the commands succeeded. However, when I flashed the bat file I described above, my phone was back in action less than 5 minutes later. I don't recommend using the OTA to update from KitKat though. It's far safer and better to install Philz , obtain root, flash twrp and then flash an updated ROM of your choice.
Sent from my iPad using Tapatalk
taadow1030 said:
Believe it or not, when i attempted to use mfastboot commands, mine didn't work either. I'm not sure what went wrong, as all of the commands succeeded. However, when I flashed the bat file I described above, my phone was back in action less than 5 minutes later. I don't recommend using the OTA to update from KitKat though. It's far safer and better to install Philz , obtain root, flash twrp and then flash an updated ROM of your choice.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
How to install philz now? becuase my device is showing Bootloader is locked.
thatRAHULfellow said:
How to install philz now? becuase my device is showing Bootloader is locked.
Click to expand...
Click to collapse
I'm not sure. My bootloader is unlocked, but I used fastboot (threads in Moto G General which includes one's by Lost101 has the specific instructions) to load Philz. Once flashed, boot into recovery. Then when you boot back into system, the recovery will ask you if you want to root. Select yes and you are good to go. Lastly, flashify app in the Play Store can be used to quickly flash twrp. I guess another way to root would be to flash superuser (also in lost101's threads in the OP section) via recovery as well. There are easier and quicker steps to do what I outlined, but the main advice is to use the bat file to quickly restore your phone to GPE kitkat and afterwards avoid updating through Motorola.
Sent from my Pixel using Tapatalk
Im getting Error 7 when i try flash, how to solve?
moto g xt1033 dual sim bootloader unlocked status code 3 no recovery ı will tried retail ASIARETAIL_XT1033_5.0.2_LXB22.46-28_cid7_CFC.xml.ASIA-DS_4.4.4_KXB21.14-L1.40_34_cid7_CFC_1FF.XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml ı cant ınstall .please help me ?
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 5.021s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 10.263s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 5.091s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) Failed to erase partition
(bootloader) Failed to flash tz
FAILED (remote failure)
finished. total time: 10.915s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe reboot-bootloader
rebooting into bootloader...
OKAY [ 0.000s]
finished. total time: 0.000s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>paus
e
Devam etmek için bir tuşa basın . . .
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 4.992s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 10.249s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 5.086s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) Failed to erase partition
(bootloader) Failed to flash tz
FAILED (remote failure)
finished. total time: 10.901s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe flash logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (295 KB)...
OKAY [ 5.004s]
writing 'logo'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition logo
FAILED (remote failure)
finished. total time: 10.013s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 5.402s]
writing 'boot'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition boot
FAILED (remote failure)
finished. total time: 10.791s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe flash recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 5.395s]
writing 'recovery'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition recovery
FAILED (remote failure)
finished. total time: 10.799s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe flash system system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (257755 KB)...
OKAY [ 14.834s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 24.041s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe flash system system.img_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (256949 KB)...
OKAY [ 23.254s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 32.877s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe flash system system.img_sparsechunk.2
target max-sparse-size: 256MB
sending 'system' (260404 KB)...
OKAY [ 17.088s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 25.956s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe flash system system.img_sparsechunk.3
target max-sparse-size: 256MB
sending 'system' (166184 KB)...
OKAY [ 11.589s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 20.500s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (49376 KB)...
OKAY [ 6.962s]
writing 'modem'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition modem
FAILED (remote failure)
finished. total time: 11.988s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe erase modemst1
erasing 'modemst1'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 9.991s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe erase modemst2
erasing 'modemst2'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 9.991s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe flash fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (103 KB)...
OKAY [ 6.325s]
writing 'fsg'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition fsg
FAILED (remote failure)
finished. total time: 13.900s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe erase cache
erasing 'cache'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 9.995s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe erase userdata
erasing 'userdata'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 9.990s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe oem fb_mode_clear
...
OKAY [ 0.002s]
finished. total time: 0.004s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>mfas
tboot.exe reboot-bootloader
rebooting into bootloader...
OKAY [ 0.008s]
finished. total time: 0.010s
C:\Users\sezai\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml>paus
e
Devam etmek için bir tuşa basın . . .
ı cant ınstall