Related
hello
(I) have and LG 3D stuck in loading
when i power on the phone, it shows an android package and a progress bar
and after few seconds (3-7) the the screen shows:
formatting data
formatting cache
then, the phone shuts down, this happens with both normal boot or pressing vol+ and the power-on button
I don't know how the problem been occurred, but i think it is a bad recovery file or something like this that my friend tried to flash onto the phone
SO, i installed the phone driver (from LGInstaller)
then, i tried making a restore from 'LGMobile update' (it downloaded a big file to flash, and say it's ok -that the phone is updated-) but no result
LG PC Suite IV is not recognizing the phone
when i try flashing any recovery, the commands are not recognizing the phone
because it keeps just few seconds before powering off (i also tried to flash in the time but nothing good)
When tried using flashboot, it doesn't also know the phone
(used fastboot devices)
i searched lot in forums but can't find a solution
so i'm stuck here,
Here is a picture showing the problem
multisiteupload.com/files/0FOIEGTI /video.rar
Edit:
i used 'LGFlashTool' to flash a .bin file, but in about 80% it says: restarting the phone, and nothing happens, then i get failed in 100%
with 'B_SmartFlashTool_Extern' the flashing goes good, but nothing changed
ARDV said:
hello
My friend have and LG 3D stucking in loading
when i power on the phone, it shows an android package and a progress bar
and after few seconds (3-7) the phone shuts sown, this happens with both normal boot or pressing vol+ and the power on button
I don't know how the problem been occurred, but i think it is a bad recovery file or something like this that my friend tried to flash onto the phone
SO, i installed the phone driver (from LGInstaller)
then, i tried making a restore from 'LGMobile update' (it downloaded a big file to flash, and say it's ok -that the phone is updated-) but no result
LG PC Suite IV is not recognizing the phone
when i try flashing any recovery, the commands are not recognizing the phone
because it keeps just few seconds before powering off (i also tried to flash in the time but nothing good)
When tried using flashboot, it doesn't also know the phone
(used fastboot devices)
i searched lot in forums but can't find a solution
so i'm stuck here,
here is a picture of the folder of programs i used and did not work, and a video showing the problem
multisiteupload.com/files/0FOIEGTI /video.rar
help me please
Click to expand...
Click to collapse
You try here
forum.xda-developers.com/showpost.php?p=18082599&postcount=1
littlega said:
You try here
forum.xda-developers.com/showpost.php?p=18082599&postcount=1
Click to expand...
Click to collapse
already tried it, the problem is i can't make step 2, which is enabling debug
and the PC is not recognizing the phone
when i open that programs, i it says that no device is connected
i will give it another try
Edit: i found a new thread that i think it may help
http://forum.xda-developers.com/showpost.php?p=17177547&postcount=2
but the problem is that fileserve is no longer a file sharing website, so i can't get the bin files
i'm goggling it but nothing yet, hope to find a bin, cuz i didn't try that way in the thread
ARDV said:
already tried it, the problem is i can't make step 2, which is enabling debug
and the PC is not recognizing the phone
when i open that programs, i it says that no device is connected
i will give it another try
Edit: i found a new thread that i think it may help
http://forum.xda-developers.com/showpost.php?p=17177547&postcount=2
but the problem is that fileserve is no longer a file sharing website, so i can't get the bin files
i'm goggling it but nothing yet, hope to find a bin, cuz i didn't try that way in the thread
Click to expand...
Click to collapse
in step 2
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)
Try to reinstall drives.Remove battery, plug phone to computer, press vol+ button and insert battery.
1682 toutesp
littlega said:
in step 2
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)
Try to reinstall drives.Remove battery, plug phone to computer, press vol+ button and insert battery.
Click to expand...
Click to collapse
sorry, i remembered that i have already made this before
i mentioned that in the thread, i waited the program 1 hour downloading the new flashing files, and after thats it says that all is ok and i can power on the phone
but there is no result even after that
ARDV said:
sorry, i remembered that i have already made this before
i mentioned that in the thread, i waited the program 1 hour downloading the new flashing files, and after thats it says that all is ok and i can power on the phone
but there is no result even after that
Click to expand...
Click to collapse
I can not post pictures.
you try this before http://forum.xda-developers.com/showthread.php?t=1473781
then http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
you can use KDZ file don't need waiting to download and you can turn on the phone
littlega said:
I can not post pictures.
you try this before http://forum.xda-developers.com/showthread.php?t=1473781
then http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
you can use KDZ file don't need waiting to download and you can turn on the phone
Click to expand...
Click to collapse
already tried that methoed, but no result after finishing update
littlega said:
I can not post pictures.
you try this before http://forum.xda-developers.com/showthread.php?t=1473781
then http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
you can use KDZ file don't need waiting to download and you can turn on the phone
Click to expand...
Click to collapse
that sounds different
but i always get the no connection problem
stooorage.com/show/1108/5893368_06-04-2012-9-27-53.png
ARDV said:
already tried that methoed, but no result after finishing update
Click to expand...
Click to collapse
Have you tried other KDZ files yet ?
stooorage.com/show/1108/5893368_06-04-2012-9-27-53.png File not found.
littlega said:
Have you tried other KDZ files yet ?
stooorage.com/show/1108/5893368_06-04-2012-9-27-53.png File not found.
Click to expand...
Click to collapse
add www to the link
www .stooorage.com/show/1108/5893368_06-04-2012-9-27-53.png (space)
_____
i jsut used 1 kdz file, but it doesn't even use it
and when i use the http program, it keeps teling me that the internet connection have a problem and doesn't move to the flashing procedure, i followed the tuto step by step
______
Edit: i believe that a change happens
it tells me now when i connect the phone via usb that the OMAP 4430 friver is not installed
and the Win7 can't find it, i just have 2 other OMAP-driver install files
but not for 4430 version, i'm searching for this one but nothing yet
____________
Edit: in another thread i found that someone telling that the 4430 driver installation is a little hard with WIN7
because the friver just shown in the device manager in 1 sec, and it diappear
and it's really the case, i catched it and made the method of choosing the files of the driver like mentioned
but it still telling me that it is not installed
here is a picture
www .stooorage.com/show/1108/5893444_06-04-2012-10-11-25.png (space)
in the right, there is the window that i choosed the fricer files from
on the left, the driver disappeared, and the other device windows telling me that the driver is not installed
help please
download driver here
mediafire.com/?ouxtb21xrj56x6j
littlega said:
download driver here
mediafire.com/?ouxtb21xrj56x6j
Click to expand...
Click to collapse
thanks for the link
for:
LGUnitedMobileDriver_S4981CAN35AP22_ML_WHQL_Ver_3.5
i have already the 3.6 driver
i have installed msxml
and it ask to update OMAPFlashInstaller and i accepted
now i'm trying another time with LG support tools - i'm making an online restore (that i have made before and not worked)
the updater finished downloading the new version (about 1 hr) and now it stucks on the update step
____________
Edit: that http program worked now, and the update process worked fine
but it's the same problem, nothing has changed (in the video i posted)
ARDV said:
thanks for the link
for:
LGUnitedMobileDriver_S4981CAN35AP22_ML_WHQL_Ver_3.5
i have already the 3.6 driver
i have installed msxml
and it ask to update OMAPFlashInstaller and i accepted
now i'm trying another time with LG support tools - i'm making an online restore (that i have made before and not worked)
the updater finished downloading the new version (about 1 hr) and now it stucks on the update step
____________
Edit: that http program worked now, and the update process worked fine
but it's the same problem, nothing has changed (in the video i posted)
Click to expand...
Click to collapse
You used to KDZ file or Lg auto download update ?
youtube.com/watch?v=xGl8mJXxyFo
I had this problem 2 i have send it to vip service
Sent from my LG-P920 using XDA
for this video: youtube.com/watch?v=xGl8mJXxyFo
i have exactly followed it step by step, and tried the 2 methods:
KDZ falsh and auto download
but, I'm still stuck in this problem
the phone is not usable
HELP please
Try another KDZ file. Finding the right kdz file for your phone.
http://lg-phone-firmware.com/index.php?id_mod=2
littlega said:
Try another KDZ file. Finding the right kdz file for your phone.
http://lg-phone-firmware.com/index.php?id_mod=2
Click to expand...
Click to collapse
tried another one but the same problem
also tried: EMERGENCY instead CS_EMERGENCY
and i hope to know the differences between all these modes
i think the solution may be with flashing a bin file, but i don't have any bin and can't find one (fileserve is blocked now)
ARDV said:
tried another one but the same problem
also tried: EMERGENCY instead CS_EMERGENCY
and i hope to know the differences between all these modes
i think the solution may be with flashing a bin file, but i don't have any bin and can't find one (fileserve is blocked now)
Click to expand...
Click to collapse
Do you boot into recovery and wipe data?
The Dark Lestat said:
Do you boot into recovery and wipe data?
Click to expand...
Click to collapse
i hope that you can track all the thread, you may help
for the recovery, i can't enter into it
ARDV said:
i hope that you can track all the thread, you may help
for the recovery, i can't enter into it
Click to expand...
Click to collapse
Stock Android recovery is annoying to get into.
It takes me 3 - 4 times to boot into it.
Use [Vol Down + 3D] + Power
Try various ways
Hold down the Vol Down + 3D until the screen turns black.
Hold then down until you see the LG logo.
Hold then down while inserting the battery
Also, make sure the power cord is unplugged.
Sent from my Samsung Galaxy S II w/ CM9
Hey guys,
I got a little problem here and would appreciate any help. As you might have guessed from the title I have an Optimus One here that won't boot. It is stuck on LG logo screen. The phone is not mine but my father-in-law's and I told him I would have a look since his warranty is already void. He told me that he turned it off because it was gettin really slow (and he does that from time to time to clear memory) and as he wanted to turn it on again, it was stuck on LG logo. And has been since. I can still access emergency mode though, but that's it!
Now, I know that there are a lot of threads that treat this problem but in every one of these threads people solve the problem by flashing a stock ROM via KDZ. And that doesn't work for me. It just won't go through with the whole process. I'm flashing in emergency mode and always at some point you hear the sound indicating that a USB device has been unplugged and it starts to boot (I don't know if it is supposed to cause I've never had one of these phones in my hand that was working properly, only this broken one) but obviously gets stuck at LG logo. After a while I get an error from KDZ and thats it.
I also tried with LGMDP, which didn't work either. And obviously I tried a hard-reset, which didn't do anything.
I really don't know what to do with that stupid thing. But I am 100% convinced that it can be revived because emergency mode is still accessable.
Can any of you guys help me? Would be much appreciated!!
Cheers
Hard reset!! again...mb try to flash CWM and wipe data/cache/dalvik
Hard-Reset doesn't work. Just leaves me at the lg logo again. How do you flash CWM? You mean with LGDMP?
tried it, didn't do anything. Thanks for the effort though...
No. KDZ
I`ve broken CWM and killed my O1. And just flash CWM via KDZ and reflesh ROM. It helps me
@ElZeck, when you are flashing with KDZ, what is the error that you get? Also, what is the operating system on your computer? I think I had trouble using KDZ on Windows 7/8, but Windows XP worked just fine. Maybe you might want to try using KDZ on a different computer.
Hey guys, thanks for your replies!
@Kill4File: How do you flash CWM with KDZ? I tried with LGMDP but I wouldn't know what file I would need to do so with KDZ. Can you supply the file?
@sweetnsour: I don't recall the error exactly. I know it ran through parameters until 100 twice and then it got stuck at sth. like wPrm 8. That sound familiar to you? OS is Windows 7.
Just download a recovery like cwm or twrp, then extract the .img file and flash that through lgmdp.
Edit : if you start your phone what happens?
Sent from my LG-P500 using xda app-developers app
Thanks for your reply, TheAndroidGeek, I already did that und it didn't change anything. When I start the phone, the LG logo pops up and that's it.
ElZeck said:
Thanks for your reply, TheAndroidGeek, I already did that und it didn't change anything. When I start the phone, the LG logo pops up and that's it.
Click to expand...
Click to collapse
Did you boot into recovery by pressing home +volume down +power?
Sent from my LG-P500 using xda app-developers app
ElZeck said:
Hey guys, thanks for your replies!
@Kill4File: How do you flash CWM with KDZ? I tried with LGMDP but I wouldn't know what file I would need to do so with KDZ. Can you supply the file?
@sweetnsour: I don't recall the error exactly. I know it ran through parameters until 100 twice and then it got stuck at sth. like wPrm 8. That sound familiar to you? OS is Windows 7.
Click to expand...
Click to collapse
I remember my friend bricking his LG Mytouch, so I tried to help him out with KDZ. I believe you got a similar error (and he was also using Windows 7). I think looking for a different computer to use KDZ on might be the key, especially if you find a Windows XP computer. Basically Windows 7 caused trouble for my friend and me, and Windows 8 wasn't any better. My old XP desktop got the job done though.
This is what I do when I use KDZ (don't miss the words in bold):
1. Manually boot your phone into emergency mode, with emphasis on manually. To do so, hold Back + Vol Up + Power.
2. Plug the cable into the computer first, and then the other end into the phone, in that order. I know some people are used to plugging the cable into the phone first and then into the computer, but sometimes (at least when the phone is normally booted) the computer doesn't detect the phone.
2a. Just making sure, I assume that since your computer at least began the KDZ flash, you already have the drivers for your phone. If you do decide to try it on a different computer, remember to install the drivers (reasons on why I use Windows XP in the next step). Also, don't forget to disable the LGE Modem in Device Manager.
3. Open KDZ. I don't know why KDZ causes issues for me on Windows 7/8, but on those two operating systems, I get some sort of "compatibility issues." Also, KDZ likes to crash in the middle of a flash. Never had any of those issue in Windows XP (no crashes, and I believe KDZ was built for XP anyway since there aren't any compatibility issues).
4. Make sure you have it set to 3GQCT and DIAG. (If KDZ fails to flash, try the different options under PHONEMODE and also try shaking your phone during the flashing process). Browse to your KDZ file.
5. Begin the flashing process. No matter what happens on your phone (it reboots, makes noises, etc) don't remove the cable until KDZ reads "FINISHED".
6. If the phone fails to boot properly (stuck on bootanimation even though it flashed properly), yank the battery, and hold Home + Vol Down + Power. This will begin a hard reset.
If this is what you've been doing on Windows 7 and it still fails, I highly recommend using Windows XP.
Hopefully that helps
TheAndroidGeek said:
Did you boot into recovery by pressing home +volume down +power?
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
Unfortunately, I can't! Only emergency mode is accessable. Anything else (recovery, hard reset,...) leads to LG logo screen.
@sweetnsour: thanks for the detailed description but unfortunately that is exactly what I've been doing...
But there is one silver lining: I didn't try Win XP yet. I'll keep you updated...
Optimus not starting up nor booting. Nothing Please help
Dear friends, I have rooted LG Optimus One P 500. I rooted it using Super One Click. Then flashed the cwm recovery. From then on my mobile wont start, neither boot,. Pc dont recognise it, nor show it. The screen is off inspite how hard I press the combo button, the power button. Nothing will happen. Please help.
ikunalb said:
Dear friends, I have rooted LG Optimus One P 500. I rooted it using Super One Click. Then flashed the cwm recovery. From then on my mobile wont start, neither boot,. Pc dont recognise it, nor show it. The screen is off inspite how hard I press the combo button, the power button. Nothing will happen. Please help.
Click to expand...
Click to collapse
It a hard brick. Don't bother. Go LG service center and get ur phone's board changed
Sent from my LG-P500 using xda premium
I can help
Seriously throw ur device in bin and buy a second hand x8 ,,,it's the best
Send it to lg
Hi!
I got the sam problem. I can't access the recovery mode at all. Once i start it freezez at the logo. No matter what button i press the phone jumpstarts to the logo but from there it's all dead:/ Have you solved this one yet?
Shimozuzukato said:
Hi!
I got the sam problem. I can't access the recovery mode at all. Once i start it freezez at the logo. No matter what button i press the phone jumpstarts to the logo but from there it's all dead:/ Have you solved this one yet?
Click to expand...
Click to collapse
I had this. I took out the battery, replaced it and then plugged into the USB. Got charging screen. From there, adb reboot recovery, restored a backup, and got back up and running (assume you have a usable backup available).
Here is a way to revive your phone
If you can enter recovery mode,your phone is revibable.You can install CyanogenMod 7 Android 2.3.7.
First,you need to download CM7 ROM.
Then download Google Apps.
After you download these files,put your sdcard in other phone,then connect to computer via USB cable.
Transfer the downloaded zip files to sdcard.
Insert your sdcard in your LG Optimus One.
Put your phone into recovery mode(ClockWorkMod recovery is required).
Use Volume buttons to navigate and Menu/Search key to select.
From the main menu,select mounts and storage>format/system.
Also select format/data and format/cache.
Go to main menu and select wipe data/factory reset>yes.
Now,select install zip from sdcard>choose zip from sdcard and select downloaded zip
Also,install Google Apps.
Reboot your phone.
You'll see the LG logo,Don't Panic!Wait a few seconds,and the CM boot animation will appear.
First boot takes some long time to install updates.
You're done!
Hello, today i was updating my O3D to the official ICS when suddenly my crappy dell computer crashed. The flash failed and now the only thing my phone does is vibrate and show the LG logo then within 1 second it shuts off. I tried different ressurection guides and all failed. Even with the LG recovery it doesn't work. It detects my phone as cdma device and flashing works but when i try to start i got the same problem.
Anyone experienced this problem??
Thank you!
have you tried to flash kdzfile?
Sent from my LG-P920 using xda app-developers app
luilak_ said:
Hello, today i was updating my O3D to the official ICS when suddenly my crappy dell computer crashed. The flash failed and now the only thing my phone does is vibrate and show the LG logo then within 1 second it shuts off. I tried different ressurection guides and all failed. Even with the LG recovery it doesn't work. It detects my phone as cdma device and flashing works but when i try to start i got the same problem.
Anyone experienced this problem??
Thank you!
Click to expand...
Click to collapse
Aside from hardware damage , which is not likely , O3D is unbrickable.
You're probably not doing it right.
If it gets to the bootloader which is running under that lg logo you speak of , that means it's not totally bricked.
If it just shuts off than that means , it can't load the system partition because it's filesystem is either corrupted or nonexistent.
That's a good sign , that means it's looking for it , and if the bootloader is there , that means it can probably get into download mode without external help.
So , you need to get into download mode and flash a bin rom to your device.
Download LG Flashtool and install the correct drivers listed and linked in the resurrection guide.
Load the dll and the rom to it then press ready.
Use the resurrection guide to get into download mode , you can skip the part "omapboot" to get into download mode if you can get into download mode without it. (Remove the battery press the vol + button and you hear a connected then disconnected , then in the second connected you plug the battery in.) If you installed the drivers correctly it will get into download mode. If it doesn't start over , you probably did something wrong or you need omapboot.
Don't worry i faced a couple of scary and frustrating hours in my first time but you'll get through.
Use the guide for everything you need.
Alternatively , you can always take it to your LG Service Center...
Here what happen. I wanted to instal this custom rom http://forum.xda-developers.com/showthread.php?t=2304297
After i downloaded all files, i put them in internal memory instead of SD card, so when i entered in Recovery mode, i did Format System, and than i find out that i need to put files in SD card, i pres rebot system now, and it stucked.
Than i download this firmware http://forum.xda-developers.com/showthread.php?t=1998277
And Flash tool 0.9.13 and i did flash. After it said DONE, i unpluged phone and i try to turn it on but nothing happen. I put it on charger and it went in flash mode, Green led, i pull out battery and hold power button for few second than plugged charger again, but same only blue led and that's all.
Maybe problem was in flash toll because in first two try i was unable to flash it it showed me header error, but after i unpluged phone than click on flash and chose file and pluged it again, it worked.
Any idea how to fix this ?
JoleKze said:
Here what happen. I wanted to instal this custom rom http://forum.xda-developers.com/showthread.php?t=2304297
After i downloaded all files, i put them in internal memory instead of SD card, so when i entered in Recovery mode, i did Format System, and than i find out that i need to put files in SD card, i pres rebot system now, and it stucked.
Than i download this firmware http://forum.xda-developers.com/showthread.php?t=1998277
And Flash tool 0.9.13 and i did flash. After it said DONE, i unpluged phone and i try to turn it on but nothing happen. I put it on charger and it went in flash mode, Green led, i pull out battery and hold power button for few second than plugged charger again, but same only blue led and that's all.
Maybe problem was in flash toll because in first two try i was unable to flash it it showed me header error, but after i unpluged phone than click on flash and chose file and pluged it again, it worked.
Any idea how to fix this ?
Click to expand...
Click to collapse
you should read step to use FlashTool again. If not you can use SUS ( Sony Update Service)
Sent from my ST23i using XDA Premium 4 mobile app
JoleKze said:
Here what happen. I wanted to instal this custom rom http://forum.xda-developers.com/showthread.php?t=2304297
After i downloaded all files, i put them in internal memory instead of SD card, so when i entered in Recovery mode, i did Format System, and than i find out that i need to put files in SD card, i pres rebot system now, and it stucked.
Than i download this firmware http://forum.xda-developers.com/showthread.php?t=1998277
And Flash tool 0.9.13 and i did flash. After it said DONE, i unpluged phone and i try to turn it on but nothing happen. I put it on charger and it went in flash mode, Green led, i pull out battery and hold power button for few second than plugged charger again, but same only blue led and that's all.
Maybe problem was in flash toll because in first two try i was unable to flash it it showed me header error, but after i unpluged phone than click on flash and chose file and pluged it again, it worked.
Any idea how to fix this ?
Click to expand...
Click to collapse
i just got through this problem...so if u are still facing it,here goes..
can u get blue led(fastboot)..if yes then connect to a win 7 computer with required drivers(win 8 doesnt work properly)..start falshtool on that computer and connect the phone in fastboot mode,..after a few seconds it will go back to green led..manually repeat connecting in fastboot mode untill your battery gets enough charge(which you wont know untill you have triued flashing)..after a few hours try flashing only the kernel using flashtool ...if this completes you are halfway through...if not then repeat the previous steps untill it does...then when this is doneleave the phone connected to your usb,it should bootloop between sony logo and flash mode...after a few hours when there is enough charge in your phone you might have to flash stock ROM or any stock kernel based rom..
if this doesnt work ,can u get back to me with some step step of what you actually did prior to this situation?
Thank me if it helped
I used SUS and now its work fine
Послато са GT-I9300 користећи Тапаталк 4
So one day I decided to flash custom ROM onto my Samsung galaxy Tab 3 Lite (SM-T110) and I used Odin and was new to the whole Rom flashing thing, and so It messed up during flashing and I was stupid and unplugged my tablet and now it is stuck in the download mode saying "Firmware upgrade encountered an issue, please use KIES and try again" something along those lines, and I tried looking it up and tried to fix it, like holding down power button and hard rebooting, didn't work, which now, every time I plug it into my pc to try a flash factory ROM and it keeps turning on and off on the error screen. So can someone help? I cant take it apart because I am using a screwdriver and it is damaging it, to try and take out battery and put it back in, and I'm not buying one of those plastic tools, I want to but, its just for another reason why I can't, So can anyone help? Thanks!
EFS
iplayminecraftps4 said:
So one day I decided to flash custom ROM onto my Samsung galaxy Tab 3 Lite (SM-T110) and I used Odin and was new to the whole Rom flashing thing, and so It messed up during flashing and I was stupid and unplugged my tablet and now it is stuck in the download mode saying "Firmware upgrade encountered an issue, please use KIES and try again" something along those lines, and I tried looking it up and tried to fix it, like holding down power button and hard rebooting, didn't work, which now, every time I plug it into my pc to try a flash factory ROM and it keeps turning on and off on the error screen. So can someone help? I cant take it apart because I am using a screwdriver and it is damaging it, to try and take out battery and put it back in, and I'm not buying one of those plastic tools, I want to but, its just for another reason why I can't, So can anyone help? Thanks!
Click to expand...
Click to collapse
hi and don`t worry
1-flash EFS file with odin (in AP).
2-than you can wipe in recovery mode.GOOD LUCK
NOTE:efs file which is compitble with your device
i.daniyal said:
hi and don`t worry
1-flash EFS file with odin (in AP).
2-than you can wipe in recovery mode.GOOD LUCK
NOTE:efs file which is compitble with your device
Click to expand...
Click to collapse
where can I find an bfs? and what does it stand for?
EDIT: I think I found one, but ill have to wait till I get home from school to do it
So I downloaded it and it was in .tar format. do I need to convert it? because in ap it doenst show up, it shows file formats and .tar is not one of them.
EDIT: never mind used WinZip, and added it, but like I said, every time I plug my tablet into my pc, it turns on, shows the download mode error screen and turn off, then turns right back on, with same screen, and so on and so on. so I really cant do anything till that is fixed...any suggestions? Thanks!
ok try this method:
http://www.99mediasector.com/fix-er...d-issue-please-select-recovery-mode-kies-try/
i.daniyal said:
ok try this method:
http://www.99mediasector.com/fix-er...d-issue-please-select-recovery-mode-kies-try/
Click to expand...
Click to collapse
Ok just fixed the turning on and off thing, I had best idea, hold power button and plug in cord, then let go of power button and it should stay on now
EDIT: just plugged into my pc and its doing it again, it worked with charging cable, but I guess since I unplugged it, it stopped working, ill see when I get home from school and try again
Also turns out the screen only flashes on and off, when it is connected to my pc, when it is to the wall, its fine, so I need to figure that out
Ok it works with my tablet plugged into the "charging only" port basicly, but it does both charge and can send data. But every time I try to flash i on Odin, It always fails, so idk what to do
iplayminecraftps4 said:
Ok it works with my tablet plugged into the "charging only" port basicly, but it does both charge and can send data. But every time I try to flash i on Odin, It always fails, so idk what to do
Click to expand...
Click to collapse
1-enable USB debuging
2-what is the error?
I cant enable it. Still in download mode error screen, and I try to flash it using Odin and it doesn't say pass it says failed, but I'll try to reinstall Odin and maybe download a fresh copy of the stock ROM
iplayminecraftps4 said:
I cant enable it. Still in download mode error screen, and I try to flash it using Odin and it doesn't say pass it says failed, but I'll try to reinstall Odin and maybe download a fresh copy of the stock ROM
Click to expand...
Click to collapse
ok I fixed it, using this link https://www.full-repair-firmware.com/2017/11/full-firmware-t110.html
ok good
But it made it a different language upon setup but I can change to English, but it installs like 4 applications every time I reset it and boot it up, I can uninstall them, but its annoying, and the app called calendar or is supposed to be, is called s planer, I don't like it so I'm trying to find a stock ROM for it so it is back to normal.