Related
so i got a p.m. saying that there is no CWM for unlocked bootloaders on stock JB kernel for this device...
since my exams are over i can create CWM recovery for this, but first i want to know if you guys indeed need it and incase you do then i will need testers to test out the recovery as i do not have the device with me...
@mods
i am waiting for reply from users after which i will change the OP to reflect the necessary information...
But what with locked bootloaders. I would like to test it.
dufwppl said:
But what with locked bootloaders. I would like to test it.
Click to expand...
Click to collapse
do u have any recovery working on JB firmware for locked bootloaders?
I had a running CWM but under versions 7.5. Now I have not any. Or is the possibility to unlock the bootloader with status NO.
dufwppl said:
I had a running CWM but under versions 7.5. Now I have not any. Or is the possibility to unlock the bootloader with status NO.
Click to expand...
Click to collapse
i dont follow what you mean...
someone who is an advanced users can please let me know the current status asap...
http://ul.to/29n23hwi -> this CWM doesn't mount /system and /data. I don't know why. This is what I made till today.
DooMLoRD said:
i dont follow what you mean...
someone who is an advanced users can please let me know the current status asap...
Click to expand...
Click to collapse
they had recoveries with the .75(the latest ICS firmware) version, which was ICS.After the JB update there is no fully working recovery, the one termobulbulator posted is the only one booting.
tl;dr there is no recovery atm.The last recovery was for the last version of ICS.
DooMLoRD said:
so i got a p.m. saying that there is no CWM for unlocked bootloaders on stock JB kernel for this device...
since my exams are over i can create CWM recovery for this, but first i want to know if you guys indeed need it and incase you do then i will need testers to test out the recovery as i do not have the device with me...
@MODS
i am waiting for reply from users after which i will change the OP to reflect the necessary information...
Click to expand...
Click to collapse
iam waiting for test doomkernal for xperia j ............
I m ready to test ur work i have J......
yippie... i hope for CWM. what is the violence when test. when it is not extreme i would like to testing too.
i am on the tumbul-flash jb, but not unlock bootloader, which method are best for me to unlock?
kushalbhalodia said:
I m ready to test ur work i have J......
Click to expand...
Click to collapse
i wont be working on the J...
mcmaster81 said:
yippie... i hope for CWM. what is the violence when test. when it is not extreme i would like to testing too.
i am on the tumbul-flash jb, but not unlock bootloader, which method are best for me to unlock?
Click to expand...
Click to collapse
i am posting a compiled ramdisk-recovery.cpio
THIS FILE IS ONLY FOR ADVANCED USERS WHO HAVE IDEA HOW TO REPACK RAMDISKS!
it contains the correct ramdisk and compiled recovery binary which should work on 3.4 kernel....
check attached file...
Re: [RECOVERY] CWM-Based Recovery 6.0.2.8 for Xperia J (Stock JB Kernel) [NEED TESTER
But u how will u make cwm for j
Sent from my ST26i using xda premium
Re: [RECOVERY] CWM-Based Recovery 6.0.2.8 for Xperia J (Stock JB Kernel) [NEED TESTER
I need it.....
Sent from my ST26i using xda premium
DooMLoRD said:
i wont be working on the J...
i am posting a compiled ramdisk-recovery.cpio
THIS FILE IS ONLY FOR ADVANCED USERS WHO HAVE IDEA HOW TO REPACK RAMDISKS!
it contains the correct ramdisk and compiled recovery binary which should work on 3.4 kernel....
check attached file...
Click to expand...
Click to collapse
It's doesn't work. When I see sony logo I press "vol -" button repeatedly, then I see black screen.
[termobulbulator] It doesn't work. When I can see sony logo I press "vol -" button repeatedly, then I can see black screen.
DooMLoRD said:
so i got a p.m. saying that there is no CWM for unlocked bootloaders on stock JB kernel for this device...
since my exams are over i can create CWM recovery for this, but first i want to know if you guys indeed need it and incase you do then i will need testers to test out the recovery as i do not have the device with me...
@MODS
i am waiting for reply from users after which i will change the OP to reflect the necessary information...
Click to expand...
Click to collapse
Dear developer, as you know this device has not separate room in bootloader for recovery.img and this is a big issue. For now I find this solution to do onandroid backup and to flash the CWM with flashtool when I need a system restore... this is a little annoying, but works. Anyway if you could create a CWM recovery for JB stock kernel I'll be the first interested in testing it (may be one recovery.tar in /system/bin...???) Please!
blodhughofi said:
Dear developer, as you know this device has not separate room in bootloader for recovery.img and this is a big issue. For now I find this solution to do onandroid backup and to flash the CWM with flashtool when I need a system restore... this is a little annoying, but works. Anyway if you could create a CWM recovery for JB stock kernel I'll be the first interested in testing it (may be one recovery.tar in /system/bin...???) Please!
Click to expand...
Click to collapse
he won't be doing any more for the j to many noobs spamed this thread
gavster26 said:
he won't be doing any more for the j to many noobs spamed this thread
Click to expand...
Click to collapse
Ok, Mr gavster26, you are the cool ruler of Xperia J, and you really know what's going on with CWM recovery for the device! But although we have yet CWM and TWRP recovery for J none of these developers it is able to fix permanent recovery on stock rom, yet. I have idea that this will be not possible as there is no separate room for recovery in bootloader. Maybe I am wrong but as I am noob just you are, I asked to Doomlord if he will help us to solve the problem, sorry for this but I'm not spammig at all, in any case.
blodhughofi said:
Ok, Mr gavster26, you are the cool ruler of Xperia J, and you really know what's going on with CWM recovery for the device! But although we have yet CWM and TWRP recovery for J none of these developers it is able to fix permanent recovery on stock rom, yet. I have idea that this will be not possible as there is no separate room for recovery in bootloader. Maybe I am wrong but as I am noob just you are, I asked to Doomlord if he will help us to solve the problem, sorry for this but I'm not spammig at all, in any case.
Click to expand...
Click to collapse
I didn't say you was spamming bro
I have a rooted Xperia J running stock JB with locked bootloader that has no working cwm/twrp recovery (I tried CWM 6.1 and I'm getting a black screen, since the same issues seems to be happening for others in the TWRP thread I haven't tried testing that). I cannot install the adrenaline script without CWM/TWRP. So to answer your question, yes it would be great if the J had a working recovery on stock JB however I have a locked bootlader so I cannot install custom ROMs/kernels if I understand correctly what I read so far. CWM did work on stock rooted ICS (version ending with 7.5).
Please do let me know if there is anything I can do to help you with testing without bricking my phone
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
matutecarp99 said:
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
Click to expand...
Click to collapse
It's because the firmware overwrite cwm with stock recovery, you must root it or directly flash custom ROM. Or use the trick from the first replier.
Sent from my GT-I9082 using Tapatalk
CWM
vahid8910 said:
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
Click to expand...
Click to collapse
Thanks for responding! I have android 4.2.2 and my version of CWM is 6.0.4.5 this tutorial you sent me is for android 4.1 and the version of CWM "cwm-permanentor.zip" which is not .. I hope I help a friend!
No if you can help me with this, but never flashee one custom rom, I wanted to know if I could help install one with all precautions and detail because it's my first time .. ONLY IF POSSIBLE
I have the GT-I9105P with root and xposed and mods and tweaks. Thanks in advance!
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
CWM
vahid8910 said:
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
Click to expand...
Click to collapse
Risk of brick? or something similar? I have to flash with CWM?
matutecarp99 said:
Risk of brick? or something similar? I have to flash with CWM?
Click to expand...
Click to collapse
install it with CWM,
idk about brick, mine didn't brick.
CWM
I'm done updating my CWM to v6.0.4.5 right now... and it works perfectly
..
From Samsung S2+ (I9105P rooted ) running on CWM v6.0.4.5 android 4.2.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
CWM
matutecarp99 said:
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
Click to expand...
Click to collapse
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
You install it and always comes into CWM now thank you very much to all!
Could pass me the link of the tutorial to install android 4.4.2 rom kitkat? YOU!
Cyanogenmod 11
Elucidator21 said:
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
Click to expand...
Click to collapse
You Might Pass the link CM11 kitkat 4.4.2? Finish Install CWM UN while ago! : D
And tell me What son of ESA rom errors
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
CWM
vahid8910 said:
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
Click to expand...
Click to collapse
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
matutecarp99 said:
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
Click to expand...
Click to collapse
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
vahid8910 said:
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
Click to expand...
Click to collapse
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
matutecarp99 said:
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
Click to expand...
Click to collapse
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GApps http://wiki.cyanogenmod.org/w/Google_Apps
Cyanogenmod 11
Elucidator21 said:
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GooleApps http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
I already have backup done, I have "gapps-20140105-signed.zip-kk" 83.1 MB and "cm-11-20140121-UNOFFICIAL-s2vep.zip" 196 MB internal memory and external SD (I have them in the 2 memories just in case) now I have to flash. 1 -. CM11 In CWM select install if and same with gapps and reboot system now? No need to do anything WIPES dalvin cache etc. .. please explain it step by step I would not bricking THANKS
PD: I have root, I have seeder (tweak) a few mods and xposed. Also I mount folder (to passing games to external sd)
It should be checked usb debugging? And where I have to leave the backup made?
What are the bugs? I'll be able to reinstall xposed? Also change the DPI of 240-210
ALL THAT I MADE MY GALAXY S2 PLUS (I9105P)
you need to wipe it 1st before flashing CM11 and Gapps...
Cyanogenmod 11
Elucidator21 said:
you need to wipe it 1st before flashing CM11 and Gapps...
Click to expand...
Click to collapse
I tell you the steps you do and tell me if I do something wrong:
1.-Wipe data factory reset
2.-Wipe cache partition
3.-Install zip from sd card, CM11
4.-Install zip from sd card, GAPPS
5.-Reboot system now
If you do these step Ships all well? THANKS
Hey there,
i have created a flashable zip file for the xperia M2 D2303 with this tool: http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
You can flash this file in CWM Recovery like this: http://forum.xda-developers.com/showthread.php?t=2746407
After flashing you have the newest firmware for this device with root rights!
Good luck and happy flashing!
Instructions:
1. Unlock your bootloader if not already done
2. Download CWM Recovery from link above
3. Flash the CWM with flashtool in fastboot mode
4. Reboot in CWM
5. Wipe data/factory reset, wipe cache, wipe dalvik
Note: If you want not loose your apps and settings only wipe cache and dalvik in CWM before flashing the zip file.
6. flash the zip file from link below
7. reboot system
8. done
If the system after the flash is not writable, please visit this thread:http://forum.xda-developers.com/xperia-m2/development/tut-fix-mount-kitkat-root-t2861661
requirements:
Sony Xperia M2 D2303
Unlocked bootloader
CWM Recovery from link above
Flashtool
Note: Please backup your system in CWM befor flashing!
Credits:zxz0O0 for PRFcreator, DooMloRD for CWM, Naufal Sidik for fix mount system
--------------------------------------------------------------------------------------------------------------------------------------------------
Download: https://mega.co.nz/#!C9gGyBRY!flV_DeYVVLxBrm69qr_PrAUVp7TasoykszvA-5r7Gq0
What's the difference between this version and 18.3.C.0.37 except root? Also how to flash cwm?
Now we just need a method to bring CWM or TRWP to the D2303. Or is it included in the above, and I can flash it via kernel + Flashtool?
I will update the op as soon as posible.
Sent from my D2303 using XDA Premium 4 mobile app
If the kernel contains CWM, I could extract the kernel.elf from the .zip, then flash it via fastboot. Correct?
Which region is the ROM from?
peter-k said:
If the kernel contains CWM, I could extract the kernel.elf from the .zip, then flash it via fastboot. Correct?
Which region is the ROM from?
Click to expand...
Click to collapse
The kernel in this zip file not includes CWM! You need the CWM from DooMloRD.
Flash this file via fastboot, then reboot in recovery.
This is the customized MY 1281-1590 version of this firmware.
dotzi75 said:
The kernel in this zip file not includes CWM! You need the CWM from DooMloRD.
Flash this file via fastboot, then reboot in recovery.
This is the customized MY 1281-1590 version of this firmware.
Click to expand...
Click to collapse
Great. I am going ahead.
Not - Doomlords Recovery link doesn't work ... at least not here in China.
qtoo941 said:
What's the difference between this version and 18.3.C.0.37 except root? Also how to flash cwm?
Click to expand...
Click to collapse
The differences are minimal, minor bugfixes. On my device it works fine.
For flash the CWM, read the op.
when will their be a custom kernel for us locked bootloaders with cwm on it .as would like to see it on the m2 locked bootloaders .
If the fix mount system tut here does not work for you, which may not, here is a simple fix just for removing the unneeded system apk's after flashing dotzi's 18.3.C.0.39:
- create a file named "enable" with a file editor with the value 0 in it
- save the file without .txt extension, or remove the extension after the file is saved
- copy the file "enable" to sys/kernel/security/sony_ric (ignore any failed operation message)
- set permissions to rw-r-r-
Gives full access to all system files for the current session.
---------- Post added at 12:33 PM ---------- Previous post was at 12:24 PM ----------
This customized ROM works fine for me. Thanks to the OP!
Perfect would be CWM integrated into kernel, dito for the mount-sript (and init support) into ROM. That's all we need No de-odexing or other pointless stuff.
This customized ROM works fine for me. Thanks to the OP!
Perfect would be CWM integrated into kernel, dito for the mount-sript (and init support) into ROM. That's all we need No de-odexing or other pointless stuff.
Click to expand...
Click to collapse
Nice to hear that it works. To integrate CWM will only be possible if a working Recovery is available for the D2303. I just tried it in the kernel building, but I failed miserably. But I will try as soon as possible to integrate the mount-script and the init.d support.
Let us hope that even more people to deal with it and the development is of overriding driven.
dotzi75 said:
Nice to hear that it works. To integrate CWM will only be possible if a working Recovery is available for the D2303. I just tried it in the kernel building, but I failed miserably. But I will try as soon as possible to integrate the mount-script and the init.d support.
Let us hope that even more people to deal with it and the development is of overriding driven.
Click to expand...
Click to collapse
Consider putting the doomlord kernel which contains the CWM onto another storage (if he allows). Downloading from the current location is really not fun.
I'll be subscribing here as it seems you want to bring it further.:good:
Wow, nice one
Thanks for your hard work, really appreciate it
(Currently waiting for the dual-SIM one xD)
How do you were able to install CWM ? Your link is linket do DooMLoRD's CWM für JB for the D2305.
I'm gedtting a bootloop by installing it.
so far this is working i flashed cwmon my D2303 and im waiting for it to boot up now lol on the wave screen
Edit: WORKS amazing thank you so much rooted on 4.4.2 i love you (no homo)
hero66 said:
How do you were able to install CWM ? Your link is linket do DooMLoRD's CWM für JB for the D2305.
I'm gedtting a bootloop by installing it.
Click to expand...
Click to collapse
It doesn't matter. Flash the cwm via fastboot, and boot only in recovery by pressing vol down. Then Flash the zip file and reboot! It works, believe me!
Sent from my D2303 using XDA Premium 4 mobile app
hero66 said:
How do you were able to install CWM ? Your link is linket do DooMLoRD's CWM für JB for the D2305.
I'm gedtting a bootloop by installing it.
Click to expand...
Click to collapse
Enter CWM, don't allow fully loading bootloader.
---------- Post added at 10:21 AM ---------- Previous post was at 10:17 AM ----------
For mounting system permanent use the latest version Busybox Installer, previous version will not work. Then use Init.d Toggle (both Play store).
Thanks, finaly my M2 KK is rooted.
Any chance for something to d2306? Or can we crossflash the d2303 one?
Sent from my D2306 using XDA Free mobile app
macabrocabral said:
Any chance for something to d2306? Or can we crossflash the d2303 one?
Sent from my D2306 using XDA Free mobile app
Click to expand...
Click to collapse
I will take a look at this next few days if i have time. I'm busy in my Job now. Keep calm, development is just in the beginning! Don't crossflash, i don't know if its work!
Sent from my D2303 using XDA Premium 4 mobile app
Hello Guys,
Now I made some research and did it in my own way and its time for you people to try out.
#Warranty and device will be completely your responsibility, I am not responsible for any damage or any other problems caused by doing this. you are the sole responsible for any trouble caused by this thread.
If its helpful for you please post thank you for the work.
Thank You
MO.
Installation Instructions:-
1) 1st and most required is the device (SM-N900 - Exynos (India)) should be rooted
and updated with the CWM custom recovery. Find below ODIN Flashable CWM .tar File.
I expect little thank you from you guys hope u people won't miss it.
Link:-
Rom + CWM Recovery + Bootloader
ROM - https://drive.google.com/file/d/0B90ZR3485AK7TmJBOFp1emFDY1U/view?usp=sharing
BootLoader 5 - https://drive.google.com/file/d/0B90ZR3485AK7cF9EeUNoTVpHdG8/view?usp=sharing
CWM Recovery - https://drive.google.com/file/d/0B90ZR3485AK7eFRxM3dEa1VfUFk/view?usp=sharing
Hello,
The Installation Instruction video link & as well as the Lollipop ROM + CWM Recovery + Bootloader 5.
https://www.youtube.com/watch?v=9mfXfJPxZRg
2) Install X-plore File Manager.
https://play.google.com/store/apps/details?id=com.lonelycatgames.Xplore&hl=en
3) Download the given files (Use 7Zip Application to Extract the files)
Lollipop Rom :- https://www.youtube.com/watch?v=9mfXfJPxZRg
7Zip Application - http://www.7-zip.org/
4) Make a copy to the below directory;
Open X-Plore File Manager and go to
Root/mnt/shell/0/clockworkmod/backup/
Or keep this backup files to CWM backup folder if u know well
and paste the folder here (Entire Folder) if the folders are not available means create it.
5) Now go to recovery and restore the backup & format to factory settings and Ashte.
6) The Latest Lollipop and Rooted device is ready for use.
If you run into any problem like black screen then flash the bootloader 5 through odin.
For any md5 mismatch you can refer the video link for latest md5 file to proceed.
Thanks for Trying My Work,
MO
SM-N900
Reserved!!!
Mo.
Sm-n900
Lollipop Screenshots
As I promised the links are available now before mentioned time.
Happy Lollipop Guys.
Mo.
SM-N900
May i ask what changes have u made bro?
Sent from my beloved Galaxy Note 3
Mohan_recal said:
Mo.
SM-N900
Click to expand...
Click to collapse
Would be nice without MD5 mismatch during restore
unisol107 said:
May i ask what changes have u made bro?
Sent from my beloved Galaxy Note 3
Click to expand...
Click to collapse
I have not changed anything just skipped all the other steps, which is normally difficult for all Plus it is with Root.
Mo.
SM-N900
Link error
Due to heavy traffic dropbox temporarily disabled the link
I am uploading to torrents once done I will get back here with new link
Is it possible to go back to 4.4.2 kitkat with backup which i created.I have a backup of my current rom if I restore this lolipop backup can go back to kitkat with my kitkat backup?
Sent from my SM-N900 using XDA Free mobile app
Could we get a proper instruction for flashing this rom? Is this rom the one leaked from vietnam ? and also what would be the procedure to revert back to kitkat 4.2.2(ODIN or CWM Backupfile?)
Odin flash is always works and yes u can go back to 4.4.2 but make sure ur using CWM recovery and make one copy of it before proceeding.
Mohan_recal said:
Installation Instructions:-
1) 1st and most required is the device (SM-N900 - Exynos (India)) should be rooted
Click to expand...
Click to collapse
What I can see in your instructions is this is just restoring nandroid. If so -
-Why it needs Indian version?
-Why needs root?
-What about bootloader and modem?
dr.ketan said:
What I can see in your instructions is this is just restoring nandroid. If so -
-Why it needs Indian version?
-Why needs root?
-What about bootloader and modem?
Click to expand...
Click to collapse
Hi Dr.ketan
I m feeling happy that ur into my thread I m a follower of u and for this backup to do so the root is required and since mine is indian version i dont want anybody taking chance on doing this.
The bootloader is android 5 and modem is from Vietnam leak.
I expect more help from u on this to get success as this is my first thread.
Thank you
MO
SM-N900
Mohan_recal said:
Hi Dr.ketan
I m feeling happy that ur into my thread I m a follower of u and for this backup to do so the root is required and since mine is indian version i dont want anybody taking chance on doing this.
The bootloader is android 5 and modem is from Vietnam leak.
I expect more help from u on this to get success as this is my first thread.
Thank you
MO
SM-N900
Click to expand...
Click to collapse
When you restore nandroid it will replace all files from your backup so no meaning to have specifically indian version. It should work like all custom ROMs
When you restoring from nandroid, No root requires
CWM Nandroid restore doesn't restore modem and bootloader (at least on chenglu's what I am using) so provided recovery does so?
dr.ketan said:
When you restore nandroid it will replace all files from your backup so no meaning to have specifically indian version. It should work like all custom ROMs
When you restoring from nandroid, No root requires
CWM Nandroid restore doesn't restore modem and bootloader (at least on chenglu's what I am using) so provided recovery does so?
Click to expand...
Click to collapse
I had tried this with two different devices which were stock rooted devices so both got success and thought of sharing it.
Hope it will do
MO.
SM-N900
Mohan_recal said:
I had tried this with two different devices which were stock rooted devices so both got success and thought of sharing it.
Hope it will do
MO.
SM-N900
Click to expand...
Click to collapse
How did you do that with the MD5 mismatch errors, I verified every file in the backup and they do match Nandroid.md5, so something is obviously wrong, are you sure about the version of CMW?
Mohan_recal said:
I had tried this with two different devices which were stock rooted devices so both got success and thought of sharing it.
Hope it will do
MO.
SM-N900
Click to expand...
Click to collapse
which recovery you have used?
dr.ketan said:
which recovery you have used?
Click to expand...
Click to collapse
I have used CWM RECOVERY
MO.
SM-N900
Mohan_recal said:
I have used CWM RECOVERY
MO.
SM-N900
Click to expand...
Click to collapse
I have no reason to believe that restoring just nandroid will do job if that lacks bootloader and modem.
Are you sure before using this you have never installed Android L with previous method?
dr.ketan said:
I have no reason to believe that restoring just nandroid will do job if that lacks bootloader and modem.
Are you sure before using this you have never installed Android L with previous method?
Click to expand...
Click to collapse
Hey Doc.
I tried it with a new bootloader and what did happen is that it was impossible to use ODIN to flash any other
recovery, it would just fail until I reverted back to the bootloader you provided some time ago, fortunately this new
bootloader did not block me from going back.
Hello
How to make a backup of all system and apps on xperia e3? I have a 2203 device, rooted, unlocked bootloader. I want create a ftf (for flashtool) file of my all system.
Sorry for my poor english.
Thanks
pjk11 said:
Hello
How to make a backup of all system and apps on xperia e3? I have a 2203 device, rooted, unlocked bootloader. I want create a ftf (for flashtool) file of my all system.
Sorry for my poor english.
Thanks
Click to expand...
Click to collapse
well backup of system is possible through recovery.
but making ftf is not possible.(due to sony,s method is not leacked or anything liken that did,t happend)
vinay said:
well backup of system is possible through recovery.
but making ftf is not possible.(due to sony,s method is not leacked or anything liken that did,t happend)
Click to expand...
Click to collapse
Thanks for answer.
Did you can explain me how to create and restore backup? I have a 4.4.4 with stock kernel.
pjk11 said:
Thanks for answer.
Did you can explain me how to create and restore backup? I have a 4.4.4 with stock kernel.
Click to expand...
Click to collapse
what, you rooted with stock.
if your bootloader is unlocked flash cwm kernel from my thread here => http://forum.xda-developers.com/xperia-e3/general/simplified-guide-to-root-sony-xperia-e3-t3012248
and backup using cwm.