[Q] only led light blinking in moto g - Moto G Q&A, Help & Troubleshooting

I was updating my moto g to 4.4.4 and when after one hour i hve seen my phone then only black screen is coming and now when i m connecting it to charger only led light is blinking.
PLEASE HELP
NOTE- I have unlocked my bootloader
ANY HELP WOULD BE APPREACIATED

Connect to your computer. If you see something like "Qualcomm HS-USB QLoader 9008" in Win7 device manager, your phone is bricked.
Maybe this will help: http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798

This wont work any other option

Related

[Q] do i have any other option??

so here is the thing i have a Samsung galaxy s3 from virgin mobile its a sph l710
and well what happened was i was using Odin to flash the phone into a different ROM and well i figure i bricked it because it wont boot up into download mode or recovery mode it does not vibrate or no lights at all
when i connect it to my laptop i see it under ports and it is called "Qualcomm HS-USB QDLoader 9008"
Odin wont read it i have downloaded every version of Odin and still no luck on getting it to read on Odin...when i connect it to the computer or on to the charger i see the red charging light come on and after a few seconds the light comes off and disconnect from the computer and then reconnects but the charging light does not come back on
so ive tried a few thing and yet no luck so my question is do i have any other option other than jtag?

[Q] LG Optimus F3 Help

Hello! I have somehow bricked my phone. I was rooted and had cwm installed. I tried updating the software, which bricked my phone. I found online a thing to flash using recovery to unbrick, unfortunately that was for a different LG phone. I need help, the home button sometimes flashes when I plug it in. The screen stays black. I tried using ODIN and LG Flash Tool, computer wont detect the phone. Please help
You need to hold volume up while plugging the usb cable to get into download mode.
Sent from my LG-LS720 using XDA Free mobile app
Qualcomm HS-USB QDLoader 9008
trustme90 said:
You need to hold volume up while plugging the usb cable to get into download mode.
The screen is black, only yellow led light turns on. Phone is detected as Qualcomm HS-USB QDLoader 9008.
Sent from my LG-LS720 using XDA Free mobile app
Click to expand...
Click to collapse
The screen is black, only yellow led light turns on. Phone is detected as Qualcomm HS-USB QDLoader 9008.
What device do you have?
Sent from my LG-LS720
Lg optimus f3 virgin mobile ls720

LG G FLEX 2 wont turn on// stuck in HS-USB QDLoader 9008 mode help

hello to all
. i have a big problme....is my phone just turned off just like that....i was on facebook and the battery was in 70% it was good.....then in second the screnn was all black ????
i tried to turn on with power botten but nothin....i tried a hardrest but nothin.....when i plug in a pc it said to me : Qualcomm 9008
that mean a dead phone ? is there any soulution ? can someone expline to me......
i make a little search and i get family now phone stuck in HS-USB QDLoader 9008 mode ??
help me plz! how to unbrick.
with all my Respecte. thank you.

LG G3 D855 turns off during Firmware Upgrade.

HI GUYZ.
I had green screen on lg g3 d855 last day , and now I am trying to flash stock rom using Lg Flash Tool . Phone goes into Download mode and then Firmware upgrade but when it starts , after approx half of minute phone keep turning off. Hence, the upgrade failure.
I noticed that when I go into download mode , my pc detects the phone as "LG Device" ready to use , but when I start flashing the firmware , and it turns off , then Pc recognize the device as "Qualcomm HS-USB Qdloader 9008".
I assume that something wrong with Usb connection which keeps disconnecting after half of minute. even if you do nothing , still it turns off after same amount of time.
need your Help.

Need Blank Flash File for motorola G6

Can someone provied me blank flash file for motorola g6. I hard bricked my devices while updating it. There was an OTA update in my device and i was so excited that i didint notice battery percentage and started my update process. While updating my devices ran out of juice and now it is dead. It means not responding at all (not booting regularly or in recovery). When i connect it in my pc it is detected as Qualcomm HS-USB QLoader 9008. Please help me. I didnt find any blank flash file for my motorola g6. :crying::crying:

Categories

Resources