so here is the thing i have a Samsung galaxy s3 from virgin mobile its a sph l710
and well what happened was i was using Odin to flash the phone into a different ROM and well i figure i bricked it because it wont boot up into download mode or recovery mode it does not vibrate or no lights at all
when i connect it to my laptop i see it under ports and it is called "Qualcomm HS-USB QDLoader 9008"
Odin wont read it i have downloaded every version of Odin and still no luck on getting it to read on Odin...when i connect it to the computer or on to the charger i see the red charging light come on and after a few seconds the light comes off and disconnect from the computer and then reconnects but the charging light does not come back on
so ive tried a few thing and yet no luck so my question is do i have any other option other than jtag?
Related
What happened was it was updating via Samsung Kies and in the middle of updating, my computer shut off. now the phone doesn't turn on but when I connect it to the computer it says " Qualcomm HS-USB Qdloader 9008" can you guys tell me if this is fixable and how I can fix it?
Can you access download mode?
I tried to replace the battery on my Nexus 5.
powered it down and opened it up. actual swap was done without incident​Now the phone does not recognize neithe of my batteries (old and replacement). I can boot it into bootloader just fine by plugging it in a charger, but the screen will show a battery with a ? in it when trying to boot the phone.
When I plug the phone in my PC, it will only get recognized as Forge HS-USB QDLoader 9008 (COM3) under PORTS in Device Manager. I've tried the diag tool here: and all tests look fine.
Rooted, bootloader unlocked, ElementalX kernel, 5.1.1
Thanks for any help!
I used the LG Flash Tool 2014 for my device to try to recover from a bricked phone. And I think i made it worse after using the kdz file and it completed 100%. I took the battery out and unplugged the phone when it was done. It wont even show anything on the screen now or go into recovery mode. But I do show RELINK HS-USB QDLoader 9008 (COM5) under the device options in my device manager when I connect the phone to the computer. Also it does make the device connected sound when I plug it in the computer. What can I do to get out of this mess? Thanks in the advance for any help that I can get.
Any help will be appreciated. THanks.
my device got bricked and it shows nothing but a black screen.. no button combinations works, when i connect it to pc via usb cable it shows "Qualcomm HS-USB QSLoader 9008 (COM 7)..
i did nothing but suddenly my apps crashed one by one and then i restarted it but it wont started and then i removed the battery and placed it again and tryed to turn on the phone but nothing showed up..
sorry about my bad english
did you try to boot in download mode?
i tried but nothing happened..
I'm having the same issue , I sent the phone to some local shop , but they told me the board is gone .
Please update if anyone have a solution .
Hi everyone,
I have a second device as LG_G2 D802 and i gave it to a my friend. He said he rooted it and after a while bricked it.
Phone is not turning on normally, lights green and blue, LG logo appears and after a short while the phone is restarting. I can only enter download mode.
I've tried some options with using XDA topics but i couldn't solve it unfortunately. The last situation is: pc doesn't detect phone in download mode.
With short circuit, sometimes it seems as Qualcomm HS-USB Diagnostics 9006, sometimes Qualcomm HS-USB QDLoader 9008 in device manager.
I used SRK TOOL for 9006, it finished successfully but when i unplugged phone and plug battery and plug usb and enter in download mode, pc didn't detect phone, any devide, etc.
I used Boarddiag for 9008, AP TEST: Successful EMMC TEST: Successful SDRAM TEST: Successful, all process is successful. But again, in download mode, PC doesn't detect anything of the phone.
In the videos I watched, after successful SRK TOOL or Boarddiag processes, pc must detect phone in download mode but the same thing didn't happen to me
I used Win 8.1 64 bit and Win 7 X86, but same thing happened. Stuck in pc detecting problem in download mode. I installed drivers, too.
Is there anything that can be done about it?
Does anyone have an idea?
Thanks.