Related
https://github.com/aquila-dev/mt6577_FULL_AOSP_SOURCE
Just.. enjoy
The device tree is on mediatek/config
The kernel is a 3.0.13 one
This is ICS 4.0.4 aosp
Use the makeMtk command to build an image
I didn't post it on "A110 Original Android Development" category because it's not an original source... it has been leaked from an other device "mytqu-832" codename baoxue.
I found it after many hours of searching in mediatek leaked documents on chinese website (i don't speak chinese [neither read]).. then i searched on github by taping the localpath of a mediatek specific config file.. and found that ! :3
And because all smartphones are now just SoC.. a lots of things (if not everything) found here should perfectly work on a110 and king.
[EDIT: March 2014]
Github restore my repo (so the first link works again) o/ I absolutly don't know why, but that's great !
If needed varunchitre15 forked it:
https://github.com/varunchitre15/mytqu-832
PREVIOUS EDIT:
The repo has been take down by a DMCA request..
And since the complete folder takes 8GB and my upload is at 60kB/s... this will take a long to reupload it.
I juste take the most interesting part (mediatek folder) which takes 800MB uncompressed, and it's already on mega:
https://mega.co.nz/#!BwZ1iT6B!JJp9Q2FCATKEaTWWWRI85RE-tJU_fp-S4XYXtHp5QVY
(use 7zip to extract it.. i think it should work)
The other parts (kernel/framework/prebuilt/external) will follow soon.. (3.2GB compressed to upload, will take something like 15hours to upload..)
PS: PLEASE !!!! if u're porting cyanogen and you already made significant work on the port.. (like a bootable build) Send me a message, i'm very busy, i can't work for it, but keep interrest for it. Please also don't send me private message like "how to compile the kernel.."
Well done, for finding this... will be helpful .. :thumbup:
Sent from my Cynus T2 using xda app-developers app
aquila-dev said:
https:// github.com /aquila-dev/mt6577_FULL_AOSP_SOURCE
Just.. enjoy
The device tree is on mediatek/config
The kernel is a 3.0.13 one
This is ICS 4.0.4 aosp
Use the makeMtk command to build an image
I didn't post it on "A110 Original Android Development" category because it's not an original source... it has been leaked from an other device "mytqu-832" codename baoxue.
I found it after many hours of searching in mediatek leaked documents on chinese website (i don't speak chinese [neither read]).. then i searched on github by taping the localpath of a mediatek specific config file.. and found that ! :3
And because all smartphones are now just a SoC.. a lots of things (if not everything) found here should perfectly work on a110 and king.
Click to expand...
Click to collapse
Well, is it the MTK's ALPS source??
I'm asking it bcoz only ALPS builds supports dual sims(i think).
Also baidu.com hosted several files on setting up the ALPS build environment......
You seem to be good in finding stuff
Will be useful in building CM9
See if you can find JB sources as well
Btw if you find kernel sources for MT6589, you can pm me
I am planning to buy the Micromax A116 but only if I get sources
aquila-dev said:
https:// github.com /aquila-dev/mt6577_FULL_AOSP_SOURCE
Just.. enjoy
The device tree is on mediatek/config
The kernel is a 3.0.13 one
This is ICS 4.0.4 aosp
Use the makeMtk command to build an image
I didn't post it on "A110 Original Android Development" category because it's not an original source... it has been leaked from an other device "mytqu-832" codename baoxue.
I found it after many hours of searching in mediatek leaked documents on chinese website (i don't speak chinese [neither read]).. then i searched on github by taping the localpath of a mediatek specific config file.. and found that ! :3
And because all smartphones are now just a SoC.. a lots of things (if not everything) found here should perfectly work on a110 and king.
Click to expand...
Click to collapse
GREAT !!!! :victory:
balamu96m said:
Well, is it the MTK's ALPS source??
I'm asking it bcoz only ALPS builds supports dual sims(i think).
Also baidu.com hosted several files on setting up the ALPS build environment......
Click to expand...
Click to collapse
Yes it supports the dual sim feature.
#
# MTK Build Info
#
MTK_BRANCH = ALPS.ICS2.MP
MTK_BUILD_VERNO = ALPS.ICS2.MP.V1.26
Click to expand...
Click to collapse
aquila-dev said:
Yes it supports the dual sim feature.
Click to expand...
Click to collapse
Awesome!
Bro can you start building cm9
aquila-dev said:
https://github.com/aquila-dev/mt6577_FULL_AOSP_SOURCE
Just.. enjoy
The device tree is on mediatek/config
The kernel is a 3.0.13 one
This is ICS 4.0.4 aosp
Use the makeMtk command to build an image
I didn't post it on "A110 Original Android Development" category because it's not an original source... it has been leaked from an other device "mytqu-832" codename baoxue.
I found it after many hours of searching in mediatek leaked documents on chinese website (i don't speak chinese [neither read]).. then i searched on github by taping the localpath of a mediatek specific config file.. and found that ! :3
And because all smartphones are now just SoC.. a lots of things (if not everything) found here should perfectly work on a110 and king.
Click to expand...
Click to collapse
With full source in hand, kindly start cm9 compiling process.....:silly:
btw, when i try to clone in windows they say source may be corrupted..any tip bro?:fingers-crossed:
nexi4droid said:
With full source in hand, kindly start cm9 compiling process.....:silly:
btw, when i try to clone in windows they say source may be corrupted..any tip bro?:fingers-crossed:
Click to expand...
Click to collapse
Why are you cloning it in windows bro?? We can't cross-compile Android in Windows environment....
Get a Linux distro and clone it there........
Anyway if you had completed cloning in windows, just copy the whole directory to your Linux......
can we expect cm 9 ???:silly:
Dj_cool said:
can we expect cm 9 ???:silly:
Click to expand...
Click to collapse
No it doesn't support dual sim
Sent from my HTC Explorer A310e using xda premium
DanceOff said:
No it doesn't support dual sim
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
I am sure most of us are willing to sacrifice dual sim support if we are on cm or ubuntu!
Sent from my Micromax A110
Dj_cool said:
can we expect cm 9 ???:silly:
Click to expand...
Click to collapse
See here....very interesting
http://www.jetdroid.org/shanzhai/2012/11/21/mt6577-kernel-source-released/
https://github.com/wiko-sources/cink-king
Hmm...the source releases seem to be growing now
pradipsoman said:
See here....very interesting
http://www.jetdroid.org/shanzhai/2012/11/21/mt6577-kernel-source-released/
https://github.com/wiko-sources/cink-king
Hmm...the source releases seem to be growing now
Click to expand...
Click to collapse
this is ics kernel sources ryt .?
mmxa110user said:
this is ics kernel sources ryt .?
Click to expand...
Click to collapse
Yes... right
DanceOff said:
No it doesn't support dual sim
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
Absolutly false.
Do you know what means override ?
How stupid am i ?
The device tree has been provided by wiko, i've cloned the source but i've didn't take a look to it..
https://github.com/aquila-dev/wiko_s9081_stock_kernel/tree/master/mediatek/config
aquila-dev said:
How stupid am i ?
The device tree has been provided by wiko, i've cloned the source but i've didn't take a look to it..
https://github.com/aquila-dev/wiko_s9081_stock_kernel/tree/master/mediatek/config
Click to expand...
Click to collapse
That means when they will release jb update they will provide jb aosp tree
Awesome
Btw any update abt jb release?
They just are waiting for google agreement..
@aquila-dev
we are also patiently waiting for the release of these kernel sources.
in order to fix some of the bugs with the cynus t2 rom on our phones, the a919.
specifically the accelerometer, gyroscope and the proximity sensors.
aquila, does the cynus t2 jb rom fully work on the cink king? without any sensor issues?
As we all know that BLU Products was suppose to release KitKat for MTK Devices but they delayed it till next month
BUT there is a catch a guy has managed to get the builds from their FTP Server and uploaded them to an alternate website
blukitkat.wordpress.com
I request the devs to try and port it to our device.
FYI the bugs are FM Radio and Play Store FCs sometime.
Sent from my A110Q using Tapatalk
builds are fake..they are just the jellybean sources
Tru That
premsagar_rs1 said:
builds are fake..they are just the jellybean sources
Click to expand...
Click to collapse
You are right bro but while browsing through the sources of life studio 5.0 II . In The Kernel Folder Under Security i Found Selinux Folder which could have helped the devs in Building kitkat for our devices :laugh:
They are suppose to be the treu kitkats but are der with bugs..
Sent from my A110 using xda premium
FOR DEVS ONLY
THIS IS A DEVELOPMENT THREAD FOR PORTING THE LINUX 3.10 KERNEL TO THE HTC ONE S (VILLE) S4 EDITION
MODERATORS PLEASE DELETE ANY POSTS THAT ARE NOT RELATED TO THE DEVELOPMENT OF THE KERNEL (OTHER THAN THESE FIRST POSTS USED TO CREATE SOME DOCUMENTATION)
XDA:DevDB Information
3.10 Kernel for the HTC One S, Kernel for the HTC One S
Contributors
javelinanddart
Kernel Special Features:
Version Information
Status: Testing
Created 2015-01-15
Last Updated 2015-01-15
This thread is a development thread for porting the Linux 3.10 Kernel to the HTC One S
All Devs are welcome to step forward
https://github.com/javelinanddart/android_kernel_3.10_ville
This will be done from the CM 12 Source Code
This IS NOT an easy task, it will take a lot of time and lot of things will need to be changed
CyanogenMod might have to be rebuilt from source to have this work properly
Look at the mergeconflicts.txt to look for things to fix, look at the fixedconflicts.txt for things that are fixed
Advantages:
-Officially Supported (3.10 is what the Nexus 6 & 9 and Android Wear Devices are Using)
-Future Android Compatibility (Android Framework and Kernel are Decoupled but Still Matters)
-Better Performance (Somewhat)
-Bragging Rights (xD this is a joke)
-Better and Newer Drivers
-More Features
-More Optimized
-Longer Support Date (Most Likely)
-Most Future Devices will Run 3.10 Kernel (Keeps our Device Current)
-Lower RAM Usage
-Support for F2FS (a faster file system for nand flash storage devices)
Contributor List
@intervigil (Ethan Chen)
@AKToronto
@mikronac.ns (Mikronac)
FAQ
Why?
Because I can (lol)
Check the Advantages list
Changelog
Initial Upload of Source
Merge tag v3.10
Resources
http://elinux.org/Kernel_3.4_to_3.10_porting_guide
A lot of the Kconfigs I fixed I just used the 3.10 ones and they're missing a lot of drivers it seems. We might have to readd those Kconfig Options. Also the defconfig will be a pain in the ass to maintain until we have a final product
javelinanddart said:
A lot of the Kconfigs I fixed I just used the 3.10 ones and they're missing a lot of drivers it seems. We might have to readd those Kconfig Options. Also the defconfig will be a pain in the ass to maintain until we have a final product
Click to expand...
Click to collapse
yeah, I am just looking in it...
mikronac.ns said:
yeah, I am just looking in it...
Click to expand...
Click to collapse
1 sec then, I'm merging with the aosp source rather than mainline linux because it includes some android specific changes
Look at the mergeconflicts.txt or try compiling it.....
My god... never seen THAT many errors in the Kconfigs
wow @javelinanddart nice, hope to port this to the m7 soon in time for lollipop, If you are having problems with drivers try taking a look at the evita kernel source, due to its similar hardware
dd98 said:
wow @javelinanddart nice, hope to port this to the m7 soon in time for lollipop, If you are having problems with drivers try taking a look at the evita kernel source, due to its similar hardware
Click to expand...
Click to collapse
Sounds good, but does Evita have a 3.10 kernel? Hopefully HTC will do that because usually they're pretty OK at updating their kernels (if not android versions)
Also @dd98, this is from the Cm12 source so if you want to help, it can possibly be compatible with the M7 @phoenixita if you'd like to help that'd be great too
javelinanddart said:
Sounds good, but does Evita have a 3.10 kernel? Hopefully HTC will do that because usually they're pretty OK at updating their kernels (if not android versions)
Also @dd98, this is from the Cm12 source so if you want to help, it can possibly be compatible with the M7 @phoenixita if you'd like to help that'd be great too
Click to expand...
Click to collapse
I'll gladly help but still only getting there on the kernel development, hope I have some free time
dd98 said:
I'll gladly help but still only getting there on the kernel development, hope I have some free time
Click to expand...
Click to collapse
What's your github username? I'll add you as a collaborator rather than pull requests. It works faster
@javelinanddart F2Fs already works on Ville I already ported it [emoji1]
Flashalot said:
@javelinanddart F2Fs already works on Ville I already ported it [emoji1]
Click to expand...
Click to collapse
I know but this is meant to be like a CM kernel (i.e. no backported features unless absolutely necessary
On a completely unrelated note, how can I build a rom and recovery with f2fs support?
javelinanddart said:
I know but this is meant to be like a CM kernel (i.e. no backported features unless absolutely necessary
On a completely unrelated note, how can I build a rom and recovery with f2fs support?
Click to expand...
Click to collapse
Ahh I see my bad also if I told you I would have to kill you [emoji88]
Jk
I'll be making a thread some time this weekend with full documentation on how to do so especially recovery since we have 3 different types just on twrp
Flashalot said:
Ahh I see my bad also if I told you I would have to kill you [emoji88]
Jk
I'll be making a thread some time this weekend with full documentation on how to do so especially recovery since we have 3 different types just on twrp
Click to expand...
Click to collapse
Thanks. If we can switch to F2FS and use a Universal TWRP, developers will have a better time on source-based ROMs. It will also help speed up the file system actions. I tried compiling twrp but I couldn't figure it out
What source are you editing the 3.4 kernel source or the 3.10 kernel source ?
Wahaj.47 said:
What source are you editing the 3.4 kernel source or the 3.10 kernel source ?
Click to expand...
Click to collapse
"3.10 porting"
Complete Kernel Source Code is essential for building rom from scratch
what lenovo did it give us incomplete Code missing the important files and directories and hide the essential part
Lenovo should release kernel source in full, so we can look after our self
Kernel development doesn't take place unless we get the device's schematics and its corresponding defconfig.
Lenovo has hidden the caf tag inside the firmware. there is matching qcom caf kernel tag for the same chipset. But without the schematics of the device, we couldn't proceed in developing
until now the official source is incomplete
but some developers trying to fill the gaps from similar devices you can find these builds on github
here is the last source kernel from lenovo and github
Downloads:
kerenel source from github by Flour_Mo :
here
kerenel source from github by ramsudharsan updated 20/8/2015 :
Here
kerenel source from Lenovo updated 7/8/2015:
Here
XDA:DevDB Information
Towards a Complete Kernel Source Code For Lenovo A6000 / Plus, ROM for the Android General
Contributors
ED300
ROM OS Version: 5.1.1. Lollipop
Version Information
Status: Testing
Created 2015-08-24
Last Updated 2015-08-24
When u develop your own kernel?
sourav8434 said:
When u develop your own kernel?
Click to expand...
Click to collapse
when i have a complete source kernel
what are you making
For which rom you are working now and when u will release kernel for lenovo a6000
check this out please
check this link please if it is complete or not
xttp://lenovo-forums.ru/topic/11326-lenovo-a6000-%D0%B8%D1%81%D1%85%D0%BE%D0%B4%D0%BD%D1%8B%D0%B9-%D0%BA%D0%BE%D0%B4-%D1%8F%D0%B4%D1%80%D0%B0/?hl=%2Ba6000+%2Bplus
change x to h
SIMBIOS said:
check this link please if it is complete or not
xttp://lenovo-forums.ru/topic/11326-lenovo-a6000-%D0%B8%D1%81%D1%85%D0%BE%D0%B4%D0%BD%D1%8B%D0%B9-%D0%BA%D0%BE%D0%B4-%D1%8F%D0%B4%D1%80%D0%B0/?hl=%2Ba6000+%2Bplus
change x to h
Click to expand...
Click to collapse
this is the same incomplete lenovo source
sourav8434 said:
For which rom you are working now and when u will release kernel for lenovo a6000
Click to expand...
Click to collapse
don't worry good news coming in the way
what news
ED300 said:
don't worry good news coming in the way
Click to expand...
Click to collapse
Whats that news ed3000
bad news
ED300 said:
don't worry good news coming in the way
Click to expand...
Click to collapse
hey i just checked lenovo site now lollipop update is in september
whats the good news?
SIMBIOS said:
hey i just checked lenovo site now lollipop update is in september
whats the good news?
Click to expand...
Click to collapse
i can't confirm any thing now ,
but i think the coming days we will make progress to solve sim bug completely on CM12.1
missing things
Hi,
I find following things missing from stock kernel
1. whole kernel directory all together
2. Def-config (altough i managed to extract it from boot.img)
Do you what are other things that are missing?
I'm able to compile the kernel with some fixes from cm kernel, but now able to generate the dtb file. Any help will be appreciated.
Thanks
Chhapil
yay
ED300 said:
i can't confirm any thing now ,
but i think the coming days we will make progress to solve sim bug completely on CM12.1
Click to expand...
Click to collapse
good luck hope you fix it praying for u
Hello how can i fix my phone lenovo A6000 it always pop up please input puk code.. How can i remove it? Thanks
Penggot said:
Hello how can i fix my phone lenovo A6000 it always pop up please input puk code.. How can i remove it? Thanks
Click to expand...
Click to collapse
i think the problem on the sim try different sim and see what happen
chhapil said:
Hi,
I find following things missing from stock kernel
1. whole kernel directory all together
2. Def-config (altough i managed to extract it from boot.img)
Do you what are other things that are missing?
I'm able to compile the kernel with some fixes from cm kernel, but now able to generate the dtb file. Any help will be appreciated.
Thanks
Chhapil
Click to expand...
Click to collapse
good job chhapil
i gave links to kernel source from github it should be completed
you will find also at github the source for cynogenmod 12.1 if you want compile it
Here is the latest update from my side.
I'm able to create zimage from kernel, dtb from source. But the kernel fails to boot.
If I flash my kernel the phone restarts with blank screen and it mounts all the partitions when connected to pc.
I'm not very sure what's going wrong.
Sent from my GT-I9100 using XDA Free mobile app
chhapil said:
Here is the latest update from my side.
I'm able to create zimage from kernel, dtb from source. But the kernel fails to boot.
If I flash my kernel the phone restarts with blank screen and it mounts all the partitions when connected to pc.
I'm not very sure what's going wrong.
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
try this link :
https://github.com/Silentlys/Cyanogenmod_device_lenovo_Kraft_T/tree/cm12.1
copy from kernel folder to kernel source and compile
you will find also zimage ready
kernel for lenovo a6000
chhapil said:
Here is the latest update from my side.
I'm able to create zimage from kernel, dtb from source. But the kernel fails to boot.
If I flash my kernel the phone restarts with blank screen and it mounts all the partitions when connected to pc.
I'm not very sure what's going wrong.
Sent from my GT-I9100 using XDA Free mobile app[/QUOTE.
Hey. Chhapil. When will you release kernel for lenovo a6000/plus?
Have u made if you made then post please
We will be thankful
Click to expand...
Click to collapse
There is no point releasing non working kernel.
Let's wait till ED300 posts a working build or Lenovo themselves.
Sent from my GT-I9100 using XDA Free mobile app
kernel boot issue
Hi,
Here is the issue i'm facing.
I created a new image from the KK stock kernel + the missing parts , repacked it the boot.img from the stock rom.
When i do
fastboot boot new-boot.img
the phone reboots and mounts the system partition and couple of other internal partitions with no display.
Do you know these symptoms?
Any Idea what could be going wrong here?
On the other note,
the LP source code compile good without any issues at all, but I'm using stock KK so there is NO room for to make tries with it.
Hi guys,
I want to present my kernel for the Samsung Galaxy Note II, that allows you to overclock up to 2.0GHz. This kernel is a port from Elite-Boeffla-Kernel (6.0.0.1-beta3), which was made for the Samsung Galaxy S3.
This kernel is currently an alpha version. Please don't expect everything to work fine.
Feature list:
- Every feature from Elite-Boeffla-Kernel for i9300 (6.0.0.1-beta3)
- no F2FS, because this doesn't work on the Note II using CM14.1
For configuration I recommend Boeffla Config.
You can use your old config you had using the official Boeffla-Kernel, but this may lead to minor problems. So I'd recommend to reset Boeffla Config before you flash my kernel. If you already use my kernel and just upgrading it you can use the old config without any problems.
WARNING!!! Nobody except you can and will be responsible for a damaged or bricked phone due to my kernel. It's very unlikely that my kernel harms your phone, but it's not impossible.
Have fun using my kernel and feel free to ask questions about it!
XDA:DevDB Information
Elite-Boeffla-Kernel, Kernel for the Samsung Galaxy Note II
Contributors
Oebbler1
Kernel Special Features: OC up to 2GHz, Support for Boeffla Config, Charging current up to 3.1 Amps
Version Information
Status: Alpha
Current Beta Version: 6.0-alpha1
Beta Release Date: 2016-12-30
Sources: https://github.com/Oebbler
Created 2016-12-31
Last Updated 2017-01-13
Changelog
6.0-alpha1
Initial release; port based on Elite-Boeffla-Kernel 6.0.0.1-beta3
6.0-alpha2
Sources updated (LineageOS from 05.01.2017)
Reserved
Hello and welcome to the note 2 development. We are happy about the kernel. Will give feedback after you give us download links .
I'm sorry for not providing any downloads, but I'm unable to attach any files to the download section. Every time when I want to accept the md5sum (after uploading) the upload form doesn't do anything.
I'll try uploading it later.
Oebbler1 said:
I'm sorry for not providing any downloads, but I'm unable to attach any files to the download section. Every time when I want to accept the md5sum (after uploading) the upload form doesn't do anything.
I'll try uploading it later.
Click to expand...
Click to collapse
I've read somewhere (@logosA) that there is an ongoing xda problem preventing uploads.
Should be fixed sometime soon maybe.
Thank you for this information! Hopefully it will work soon, because I want to publish my kernel.
can i use it on n7100 eclipse rom 4.4.4....f2fs
Where source github.
Oebbler1 said:
Thank you for this information! Hopefully it will work soon, because I want to publish my kernel.
Click to expand...
Click to collapse
I guess uploading on another host like mega or mediafire and sharing the link on the main post is an alternative until the maintenance is finished here.
Yes, or just upload it to drive and paste the link
Waiting this kernel work with cm14 n7100 unofficial
Thanks
bijoy91 said:
I guess uploading on another host like mega or mediafire and sharing the link on the main post is an alternative until the maintenance is finished here.
Click to expand...
Click to collapse
I know, but I hate these services so I'll wait until the uploader works again.
Oebbler1 said:
I know, but I hate these services so I'll wait until the uploader works again.
Click to expand...
Click to collapse
Upload from afh
Oebbler1 said:
I know, but I hate these services so I'll wait until the uploader works again.
Click to expand...
Click to collapse
Uploading now works sir
Cool, and then we have TizenOS which is working on 4412 with a whole new and updated kernel source which can be ported to our device and significantly improve the performance of the Note II.
What kernel version is this?
Which rom are you on Andrew. That's good news could you share the news link. Would it work on Nougat.
Sent from my GT-N7100 using Tapatalk
gamer_rizqi said:
Waiting this kernel work with cm14 n7100 unofficial
Thanks
Click to expand...
Click to collapse
Yes, it works with CM14, but I tested it with CM14.1 only.
Vishal Vignesh said:
Uploading now works sir
Click to expand...
Click to collapse
Thank you! I tested it 5 minutes ago, but it didn't work so I attached the kernel to the announcement post of this thread. Have fun downloading and testing it!
andrewKode said:
What kernel version is this?
Click to expand...
Click to collapse
It's a kernel based on the official kernel sources for CM14.1 for the Samsung Galaxy Note II (https://github.com/cyanogenmod/android_kernel_samsung_smdk4412)
Oebbler1 said:
Yes, it works with CM14, but I tested it with CM14.1 only.
Thank you! I tested it 5 minutes ago, but it didn't work so I attached the kernel to the announcement post of this thread. Have fun downloading and testing it!
It's a kernel based on the official kernel sources for CM14.1 for the Samsung Galaxy Note II (https://github.com/cyanogenmod/android_kernel_samsung_smdk4412)
Click to expand...
Click to collapse
I try your kernel. And I lost imei, no sim detected.
So I restore previous kernel and now work.
Please Check and fix
My Rom is latest cm 14.1
I know this bug. WiFi is also not working. I'll fix that when I get another Note II. I ported this kernel for a friend who wants to test something with it and he doesn't need RIL on his Note II. I will update the kernel when the team of Lineage OS apply some changes to the CM kernel but I can't do more at the moment because I can't test and debug my code.
So I can't guarantee this bug will get fixed. Sorry for that