Database Info

[DEV] xDEOS-CyanogenMod-9.0.0-UNOFFICIAL (ICS 4.0.3 and 4.0.4 for U8150) [01/04/12]

IMPORTANT
THREAD MOVED HERE
MOTIVATION
Welcome in the official thread of the project. This post is made to let discover you why this project is born. We are two universitary students that want more about a new branch of th IT Area, the Embedded OS Porting. We have a particular device, the HUAWEI IDEOS U8150, so our port is in this direction.
So don't ask to us why we are porting this version of Android with this device, because this project starts for educate ourself to the porting of Android OS, in particular we are oriented to port CyanogenMod ver 9. We made research to define a good porting for this device, so all the support ,moral, technical and economic(we need more RAM and CPU frequency) is really appreciated. We are also thinking to port, after this ROM Porting, the MIUI v4.
We work to create a stable ROM that could enjoy all great people that have this device. We think that newest releases of Android could run on this kind of mid-low level devices, so we make all the possible to complete this work.
The xDEOS team
raidenfox
sebaker
INFO ON THE STATUS OF PROJECT
Official Website: Here
G+ Page (daily updates) : Here
ABOUT THE ROM
This is the status of our working ROM:
ALPHA 2 (4.0.4)
CODENAME
xDEOS-9.0.0-RC0-u8150-UNOFFICIAL-alpha2-signed
Download
http://filevelocity.com/aw368vhr28qq/xDEOS-9.0.0-RC0-u8150-UNOFFICIAL-alpha2-signed.zip
Changelog
Update to 4.0.4 Distribution
Removed annoying Red Border
Modified codename
----------------------------------------------------------------------------------------------------
ALPHA 1 (4.0.3)
CODENAME
cm_u8150-9.0.0-KANG-alpha1-signed.raidenfox
WORK
USB
MMC
Browser
Gallery (without HW Acceleration)
Overclock
Thetering
Audio
GPS
Contacts
Wi-Fi
RIL (partially solved)
SENSORS (G - Sensor)
NOT WORK
Graphics Hardware Acceleration
Camera
Bluetooth
other bugs not known..
All the details about the ROM (status of bugs in bugtracker section) is available on this site.
http://www.xdeos.eu
Sorry for my bad english
SCREENSHOT

CWM INSTALLATION
Boot in recovery mode
Flash CWM [http://www.mediafire.com/?esg18iw9lx9axol]
Reboot you Phone in recovery again
FLASH THE ROM
Select Install from zip
Select cm_8150 zip file downloaded on official site
Flash it
After flash do a wipe/cache
Clean cache
Reboot phone
You have installed xDEOS!

it's compiled from source or ported from other device ?

Compiled from source, obtained with git clone on official CM git repository.

tonystark88 said:
Compiled from source, obtained with git clone on official CM git repository.
Click to expand...
Click to collapse
hmm and where download link and can't open xdeos website it say website not found

Link in the page:
http://www.xdeos.eu/index.php/79-releases/76-alpha-1
or directly
http://www.mediafire.com/?e1hccwb1h7jk9yu

tonystark88 said:
Link in the page:
http://www.xdeos.eu/index.php/79-releases/76-alpha-1
or directly
http://www.mediafire.com/?e1hccwb1h7jk9yu
Click to expand...
Click to collapse
thanks i will try on my mom u8150

Read the issues and bugs first

xDEOS ICS 4.0.4 coming soon....

Thank you very much, WIFI can not connect

wi fi does not work that hangs acquisition inidrizzo IP
bluetooth does not work
the gallery is not working
every time you click somewhere in there the red outline of the screen and is very annoying
2g 3g works
the release is cut in the bottom
USB works
micro sd is read
The GAPPS not work
well, is very good for an alpha search of the red outline fixare unlock the wi fi and bluetooth
I must say that this rom is really very fluid

tonystark88 said:
All the details about the ROM (status of bugs in bugtracker section) is available on this site.
http://ww.xdeos.eu
Sorry for my bad english
Click to expand...
Click to collapse
correct the your site in main "www" not "ww"
Thanks for the great work, continue to work!

Thanks form the work

We investigate on the wifi and red square on the screen, we'll fix it in the nxt release
Some issues are reported in the official site
Sent from my GT-S5660 using xda premium

Red border fixed ... Wait for new build...
Sent from my GT-S5660 using xda premium

WIFI and GAPPS fix? Thank you.

Add multi touch in next release plz
Sent from my Huawei U8150 using xda premium

We have completed the building or new version of CyanogenMod that implements ICS 4.0.4. The new release improve the previous functionalities and some new fix like the RED BOX Fix and a new CODENAME. Unfortunately my friend sebaker is not here so if anyone of you want test rom can do it and write old/new bugs in this post

generalnikitos said:
Add multi touch in next release plz
Sent from my Huawei U8150 using xda premium
Click to expand...
Click to collapse
We are trying to solve4 first the main problems than we add all functionalities. In official site there's a buugtracker section and i'll unlock the possibility to write all bugs signaled and suggestion for new features

sdq928 said:
WIFI and GAPPS fix? Thank you.
Click to expand...
Click to collapse
Test the Wi-Fi, i can't test it now because i don't have device at this moment . GAPPS not included yet, will be in the next release. With time we include all , must be have only patience

Trying to port kernel 3.0 for i9003, please help

Hello,
I have been porting kernel 3.0 to i9003 since last month.
Now, platform specific codes and most of the drivers are ported.
Today, I am able to finish the kernel build with minor warnings.
but I have problems customizing the init scrits to be used with the kernel.
Any help from more experience devs would be appreciated
Current status:
- Platform specific code and all drivers except battery are ported.
- The kernel is built successfully
- trying to pack it into normalboot.img
I can release the source now due to its size. ( asking a guy at github to increase my storage space). But will do asap.
Sorry to post in the wrong forum but I dont have permission to post in the dev forum.

crackerizer said:
Hello,
I have been porting kernel 3.0 to i9003 since last month.
Now, platform specific codes and most of the drivers are ported.
Today, I am able to finish the kernel build with minor warnings.
but I have problems customizing the init scrits to be used with the kernel.
Any help from more experience devs would be appreciated
Current status:
- Platform specific code and all drivers except battery are ported.
- The kernel is built successfully
- trying to pack it into normalboot.img
I can release the source now due to its size. ( asking a guy at github to increase my storage space). But will do asap.
Sorry to post in the wrong forum but I dont have permission to post in the dev forum.
Click to expand...
Click to collapse
Thank u very much! You could contact dhiru
Sent from my GT-I9003 using XDA

Great...but main question is that whether device boot or not??? Because many people have successfully compiled kernel 3.0 but device doesnt boot.

vishal24387 said:
Great...but main question is that whether device boot or not??? Because many people have successfully compiled kernel 3.0 but device doesnt boot.
Click to expand...
Click to collapse
That what I'm going to find out. For now, I'm trying to modify the init script and looking for help from some devs here to speed it up.

my wish- that you release it as fast as you can

R u using
This?
i have also used this guide n compiled a kernel 3.0 successfully packed it using dhiru's boot.img from alpha 6
i have also modified sum codes
but still no luck i think these files need alot of config changes!!!!
n lastly best of luck i hope u get success

sachin sharma said:
R u using
This?
i have also used this guide n compiled a kernel 3.0 successfully packed it using dhiru's boot.img from alpha 6
i have also modified sum codes
but still no luck i think these files need alot of config changes!!!!
n lastly best of luck i hope u get success
Click to expand...
Click to collapse
sachin sharma, can you explain your procedure during your port? I'll compare with mine to see if we do the same thing.
After checking the boot script, I don't think we can just do a drop-in replacement. I think modifying the init script is needed (and i'm working on it). Also, There are some changes in the kernel which can cause problem with the ported code. I'm thinking about droping RFS and J4FS support in the new kernel (and probably abandon all samsung code).

crackerizer said:
sachin sharma, can you explain your procedure during your port? I'll compare with mine to see if we do the same thing.
After checking the boot script, I don't think we can just do a drop-in replacement. I think modifying the init script is needed (and i'm working on it). Also, There are some changes in the kernel which can cause problem with the ported code. I'm thinking about droping RFS and J4FS support in the new kernel (and probably abandon all samsung code).
Click to expand...
Click to collapse
I will suggest u to start ur thread in development thread. In general section developers mostly dont come here. Also u should upload ur source code to github. It will help to other developers to look into ur source code & find out the problem.

vishal24387 said:
I will suggest u to start ur thread in development thread. In general section developers mostly dont come here. Also u should upload ur source code to github. It will help to other developers to look into ur source code & find out the problem.
Click to expand...
Click to collapse
He needs to pump up his post count first buddy
Sent from my GT-I9100 using xda premium

ephraim033 said:
He needs to pump up his post count first buddy
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
oh...I forgot about that Anyway how many posts one has to do so that he can post a thread in development section?

vishal24387 said:
oh...I forgot about that Anyway how many posts one has to do so that he can post a thread in development section?
Click to expand...
Click to collapse
Not sure, i think it's 10?
Sent from my GT-I9100 using xda premium

ephraim033 said:
Not sure, i think it's 10?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes, 10!

crackerizer said:
sachin sharma, can you explain your procedure during your port? I'll compare with mine to see if we do the same thing.
After checking the boot script, I don't think we can just do a drop-in replacement. I think modifying the init script is needed (and i'm working on it). Also, There are some changes in the kernel which can cause problem with the ported code. I'm thinking about droping RFS and J4FS support in the new kernel (and probably abandon all samsung code).
Click to expand...
Click to collapse
all we need is config file in /arch/arm/config for kernel 3.0 for our devices
all we have now is config file for kernel 2.6.7 thats wats preventing our devices to boot
i followed same procedure mentiond in that blog after that i used zoom config file edit it at some places wer i thought shud be a change like device name to galaxy sl etc
renamed it latona_galaxy_sl
even then no benefit but i havn't givn hope m still trying!!!!
main problem is that we dont know how to configurate config file as "make config" command gives a hell lot of options!!!!

@crackeziner is your 3.0 kernel booting ?

anuraagkochar said:
@crackeziner is your 3.0 kernel booting ?
Click to expand...
Click to collapse
Probably not.
Booting itself is the main problem .. lol.
All my attempts to port this failed miserably.

Skander1998 said:
Probably not.
Booting itself is the main problem .. lol.
All my attempts to port this failed miserably.
Click to expand...
Click to collapse
what can do now??

Skander1998 said:
Probably not.
Booting itself is the main problem .. lol.
All my attempts to port this failed miserably.
Click to expand...
Click to collapse
Just give it try. Don't let it down guys
Sent from my GT-I9003 using XDA

sachin sharma said:
all we need is config file in /arch/arm/config for kernel 3.0 for our devices
all we have now is config file for kernel 2.6.7 thats wats preventing our devices to boot
i followed same procedure mentiond in that blog after that i used zoom config file edit it at some places wer i thought shud be a change like device name to galaxy sl etc
renamed it latona_galaxy_sl
even then no benefit but i havn't givn hope m still trying!!!!
main problem is that we dont know how to configurate config file as "make config" command gives a hell lot of options!!!!
Click to expand...
Click to collapse
I have gone far more than that . All latona specific codes are ported not only the defconfig file. Most drivers (LCD, power switch, camera, etc.) are also ported. I'm now modifying the init script to match what the kernel have now. Hopefully it will boot.

crackerizer said:
I have gone far more than that . All latona specific codes are ported not only the defconfig file. Most drivers (LCD, power switch, camera, etc.) are also ported. I'm now modifying the init script to match what the kernel have now. Hopefully it will boot.
Click to expand...
Click to collapse
u mentiond that u r getting errors while compiling right?
that means ur deconfig file is still not correct
all the codes needs to be changed according to "kernel 3.0"
not by porting codes from other kernels or previous kernels
n lastly all drivers are already given in the source code thers nothing to change in it except that u just have to compile!!!!!!

crackerizer said:
I have gone far more than that . All latona specific codes are ported not only the defconfig file. Most drivers (LCD, power switch, camera, etc.) are also ported. I'm now modifying the init script to match what the kernel have now. Hopefully it will boot.
Click to expand...
Click to collapse
But did it boot?? Did u test that? When do u think u will be able to test that?

BLU Devices KitKat Builds Leaked

As we all know that BLU Products was suppose to release KitKat for MTK Devices but they delayed it till next month
BUT there is a catch a guy has managed to get the builds from their FTP Server and uploaded them to an alternate website
blukitkat.wordpress.com
I request the devs to try and port it to our device.
FYI the bugs are FM Radio and Play Store FCs sometime.
Sent from my A110Q using Tapatalk

builds are fake..they are just the jellybean sources

Tru That
premsagar_rs1 said:
builds are fake..they are just the jellybean sources
Click to expand...
Click to collapse
You are right bro but while browsing through the sources of life studio 5.0 II . In The Kernel Folder Under Security i Found Selinux Folder which could have helped the devs in Building kitkat for our devices :laugh:

They are suppose to be the treu kitkats but are der with bugs..
Sent from my A110 using xda premium

Towards a Complete Kernel Source Code For Lenovo A6000 / Plus

Complete Kernel Source Code is essential for building rom from scratch
what lenovo did it give us incomplete Code missing the important files and directories and hide the essential part
Lenovo should release kernel source in full, so we can look after our self
Kernel development doesn't take place unless we get the device's schematics and its corresponding defconfig.
Lenovo has hidden the caf tag inside the firmware. there is matching qcom caf kernel tag for the same chipset. But without the schematics of the device, we couldn't proceed in developing
until now the official source is incomplete
but some developers trying to fill the gaps from similar devices you can find these builds on github
here is the last source kernel from lenovo and github
Downloads:
kerenel source from github by Flour_Mo :
here
kerenel source from github by ramsudharsan updated 20/8/2015 :
Here
kerenel source from Lenovo updated 7/8/2015:
Here
XDA:DevDB Information
Towards a Complete Kernel Source Code For Lenovo A6000 / Plus, ROM for the Android General
Contributors
ED300
ROM OS Version: 5.1.1. Lollipop
Version Information
Status: Testing
Created 2015-08-24
Last Updated 2015-08-24

When u develop your own kernel?

sourav8434 said:
When u develop your own kernel?
Click to expand...
Click to collapse
when i have a complete source kernel

what are you making
For which rom you are working now and when u will release kernel for lenovo a6000

check this out please
check this link please if it is complete or not
xttp://lenovo-forums.ru/topic/11326-lenovo-a6000-%D0%B8%D1%81%D1%85%D0%BE%D0%B4%D0%BD%D1%8B%D0%B9-%D0%BA%D0%BE%D0%B4-%D1%8F%D0%B4%D1%80%D0%B0/?hl=%2Ba6000+%2Bplus
change x to h

SIMBIOS said:
check this link please if it is complete or not
xttp://lenovo-forums.ru/topic/11326-lenovo-a6000-%D0%B8%D1%81%D1%85%D0%BE%D0%B4%D0%BD%D1%8B%D0%B9-%D0%BA%D0%BE%D0%B4-%D1%8F%D0%B4%D1%80%D0%B0/?hl=%2Ba6000+%2Bplus
change x to h
Click to expand...
Click to collapse
this is the same incomplete lenovo source

sourav8434 said:
For which rom you are working now and when u will release kernel for lenovo a6000
Click to expand...
Click to collapse
don't worry good news coming in the way

what news
ED300 said:
don't worry good news coming in the way
Click to expand...
Click to collapse
Whats that news ed3000

bad news
ED300 said:
don't worry good news coming in the way
Click to expand...
Click to collapse
hey i just checked lenovo site now lollipop update is in september
whats the good news?

SIMBIOS said:
hey i just checked lenovo site now lollipop update is in september
whats the good news?
Click to expand...
Click to collapse
i can't confirm any thing now ,
but i think the coming days we will make progress to solve sim bug completely on CM12.1

missing things
Hi,
I find following things missing from stock kernel
1. whole kernel directory all together
2. Def-config (altough i managed to extract it from boot.img)
Do you what are other things that are missing?
I'm able to compile the kernel with some fixes from cm kernel, but now able to generate the dtb file. Any help will be appreciated.
Thanks
Chhapil

yay
ED300 said:
i can't confirm any thing now ,
but i think the coming days we will make progress to solve sim bug completely on CM12.1
Click to expand...
Click to collapse
good luck hope you fix it praying for u

Hello how can i fix my phone lenovo A6000 it always pop up please input puk code.. How can i remove it? Thanks

Penggot said:
Hello how can i fix my phone lenovo A6000 it always pop up please input puk code.. How can i remove it? Thanks
Click to expand...
Click to collapse
i think the problem on the sim try different sim and see what happen

chhapil said:
Hi,
I find following things missing from stock kernel
1. whole kernel directory all together
2. Def-config (altough i managed to extract it from boot.img)
Do you what are other things that are missing?
I'm able to compile the kernel with some fixes from cm kernel, but now able to generate the dtb file. Any help will be appreciated.
Thanks
Chhapil
Click to expand...
Click to collapse
good job chhapil
i gave links to kernel source from github it should be completed
you will find also at github the source for cynogenmod 12.1 if you want compile it

Here is the latest update from my side.
I'm able to create zimage from kernel, dtb from source. But the kernel fails to boot.
If I flash my kernel the phone restarts with blank screen and it mounts all the partitions when connected to pc.
I'm not very sure what's going wrong.
Sent from my GT-I9100 using XDA Free mobile app

chhapil said:
Here is the latest update from my side.
I'm able to create zimage from kernel, dtb from source. But the kernel fails to boot.
If I flash my kernel the phone restarts with blank screen and it mounts all the partitions when connected to pc.
I'm not very sure what's going wrong.
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
try this link :
https://github.com/Silentlys/Cyanogenmod_device_lenovo_Kraft_T/tree/cm12.1
copy from kernel folder to kernel source and compile
you will find also zimage ready

kernel for lenovo a6000
chhapil said:
Here is the latest update from my side.
I'm able to create zimage from kernel, dtb from source. But the kernel fails to boot.
If I flash my kernel the phone restarts with blank screen and it mounts all the partitions when connected to pc.
I'm not very sure what's going wrong.
Sent from my GT-I9100 using XDA Free mobile app[/QUOTE.
Hey. Chhapil. When will you release kernel for lenovo a6000/plus?
Have u made if you made then post please
We will be thankful
Click to expand...
Click to collapse

There is no point releasing non working kernel.
Let's wait till ED300 posts a working build or Lenovo themselves.
Sent from my GT-I9100 using XDA Free mobile app

kernel boot issue
Hi,
Here is the issue i'm facing.
I created a new image from the KK stock kernel + the missing parts , repacked it the boot.img from the stock rom.
When i do
fastboot boot new-boot.img
the phone reboots and mounts the system partition and couple of other internal partitions with no display.
Do you know these symptoms?
Any Idea what could be going wrong here?
On the other note,
the LP source code compile good without any issues at all, but I'm using stock KK so there is NO room for to make tries with it.

[KERNEL] [MTD] [TW/CM9/CM11] [DEV] Watson Kernel (MTD support on Gingerbread!)

Hello guys,
This is a project I was working on for a kernel for our SGY.
I made it with a few things in mind:
>Improve it's performance
>Be universally compatible (after I nearly given up on trying to get a snappier CM11 and after the need for a snappier SGY, I decided to go back to GB. However, BML is terrible, and it is annoying to come back to. I decided to build a MTD kernel for Gingerbread then, and it works!)
>Experiment and upgrade as much as I can (thanks @robcore!!!!)
But since I lost my device, I cannot continue developing it. I am then releasing the source code (sorry, no flashable stuff, I deleted it long ago ) for any of you to continue(?) my work if your heart so desires.
If I ever get myself another SGY (or another BCM21553 device), I will gladly continue development (and support whoever does it too), but before I lose all my data and the kernel code alongside it, I am making it available.
This kernel features:
-OC up to 1040MHz (It's questionable even today if the bcm21553 OCs really work, but I tried hacking a way that works very similarly to MarocOS's one, maybe even better. Be warned though, the source around it is messy)
-GPU hacks for performance (Again, even I don't know if they do work, probably the values are just there to be seen, I'm not sure. I do know though that increasing the CPU speed will much likely increase the speed of V3D too)
-DVFS disabled (I found out DVFS is mostly the culpirit in the "832MHz crisis" where the kernel would forcefully scale itself to 832MHz, so I eliminated any reference to it in kernel code. Apparently DVFS on the processor is only available under the bcm21553 governor, but it is present on the other drivers as well. The idea for disabling DVFS came from my friend @robcore)
-A few additional governors and a buggy interactive governor (which is the default xd)
-MTD support for Gingerbread (Thanks Samsung Epic 4G! Although it only works on TouchWiz (I tried it with SL v2 and v2.1 and it works, but under NougatME(CM7) I got no success and loads of segfaults), it works ALMOST perfectly. See bugs for details )
-Some scraped source code from Samsung's FSR I found on the internet (barely compilable, though)
Bugs:
>Gingerbread version:
-IMEI won't appear in the Status screen, I also faced problems with non-working radio for calls. Data works just fine, but calling and receiving calls is unavailable. I believe it is EFS-related. My suggestion is backing up the EFS partition's file structure, then converting it to MTD, then restoring the backup.
-TWRP will crash and panic when exiting, a workaround is force rebooting
>ICS version:
-TWRP will crash and panic when exiting (I believe fixing it here will fix the bug above too)
>KitKat version:
-Flashing images fail randomly, you may also be unable to reboot normally if you do so. I tried addressing this but I couldn't get anywhere.
DOWNLOAD THE SOURCE: Here!
Thanks to:
 @robcore - his development on the Snapdragon S4 breathes life on my dev soul!
 @zman0900 - I saw his thread on an MTD TW kernel for the Samsung Epic 4G, which led me to believe MTD on GB is possible.

nice kernel
It sound nice. I'm a newbie developer, I'm building a kernel to fix audio bug on cm9, hope it work. And thank you for the source

vdhero said:
It sound nice. I'm a newbie developer, I'm building a kernel to fix audio bug on cm9, hope it work. And thank you for the source
Click to expand...
Click to collapse
Have you gathered enough info on it? I would like to fix it too, but I couldn't get any info on whether if the audio bug is a kernel-side issue or an OS -side issue.
Best of luck for you

Building and fixing
sonickles9 said:
Have you gathered enough info on it? I would like to fix it too, but I couldn't get any info on whether if the audio bug is a kernel-side issue or an OS -side issue.
Best of luck for you
Click to expand...
Click to collapse
I don't sure so I decided to build a kernel from your source and another cm9 version from Mohamad.Afaneh's source and I'll merge the audio on both of them for the best think to fix the bug.Thank you .

Link for kernel?
(img files...)(stock/cm9/cm11)

TheRealModder said:
Link for kernel?
(img files...)(stock/cm9/cm11)
Click to expand...
Click to collapse
Compile one for yourself,man. It only takes like 15-25 mins

vdhero said:
Compile one for yourself,man. It only takes like 15-25 mins
Click to expand...
Click to collapse
I don't know how to compile....

TheRealModder said:
I don't know how to compile....
Click to expand...
Click to collapse
He wrote a script already, just add your toolchain and run the script. There's a guide in the readme

vdhero said:
He wrote a script already, just add your toolchain and run the script. There's a guide in the readme
Click to expand...
Click to collapse
Ok. The watson-kernel-bcm21553-src is used with other files?
Because i want to make cm9 mohhamad afaneh optimized version

TheRealModder said:
Ok. The watson-kernel-bcm21553-src is used with other files?
Because i want to make cm9 mohhamad afaneh optimized version
Click to expand...
Click to collapse
To make it, you have to sync the cm9 source code then add the files from his github to your localmanifest. This thing is not in anyway related to that except the MTD. This one is a kernel-compile only source

Oh man, i give up. I can't build a kernel from source, but i can modify a kernel.
Can someone give me the zimage for ics Please....
Sent from my Zenfone 2 Laser using XDA Labs

TheRealModder said:
Oh man, i give up. I can't build a kernel from source, but i can modify a kernel.
Can someone give me the zimage for ics Please....
Click to expand...
Click to collapse
zlimage? We don't have that here, we only have boot.img for kernel

vdhero said:
zlimage? We don't have that here, we only have boot.img for kernel
Click to expand...
Click to collapse
Or you can give me the extracted boot.img files. (ICS/KK)
I will rebuild it using dsixda's android kitchen.
Sent from my Zenfone 2 Laser using XDA Labs

TheRealModder said:
Or you can give me the extracted boot.img files. (ICS/KK)
I will rebuild it using dsixda's android kitchen.
Sent from my Zenfone 2 Laser using XDA Labs
Click to expand...
Click to collapse
Sorry but I can't because I'm bored of making ROMs so I switched back to Windows. I'm planning on making a ROM, I'll compile the kernel for you once I get linux installed

vdhero said:
Sorry but I can't because I'm bored of making ROMs so I switched back to Windows. I'm planning on making a ROM, I'll compile the kernel for you once I get linux installed
Click to expand...
Click to collapse
Ok. If you want to install linux i recommend using ubuntu or linux mint.
Ubuntu official website:https://www.ubuntu.com/
Linux mint official website:https://linuxmint.com/
Sent from my Zenfone 2 Laser using XDA Labs

VDHERO Please But a New Galaxy t Gt-S5360 and start the Development!
vdhero said:
To make it, you have to sync the cm9 source code then add the files from his github to your localmanifest. This thing is not in anyway related to that except the MTD. This one is a kernel-compile only source
Click to expand...
Click to collapse
VDHERO Please But a New Galaxy t Gt-S5360 and start the Development!

Assabtigle said:
VDHERO Please But a New Galaxy t Gt-S5360 and start the Development!
Click to expand...
Click to collapse
Sorry but I can't since my sgy is dead for a long time ago. I'll try to make one if I can find one. I've heard that there are some places that sell sgy for about 5 bucks, i'll find one ì possible

Be fast bro!!
vdhero said:
Sorry but I can't since my sgy is dead for a long time ago. I'll try to make one if I can find one. I've heard that there are some places that sell sgy for about 5 bucks, i'll find one ì possible
Click to expand...
Click to collapse
BE fast BRO Love U and Your WORK!!
All Your DEVELOPMENT are Faster than The ORIGINAL one Please Buy a NEW one!
and Yeah install the Stock Rom in your Phone by ODIN it will be fine!:laugh: