Related
Is there any kernel that suports loopdevice on G3?
Will it be created if there isnt?
Send from my:
-Samsung Galaxy 3
-Kyrillo's rom v9.3
-Fugumod ultra 1366Mhz (no lag)
no der is not any loop device kernel available i guess but To enable it, you'll have to build the appropriate kernel module and modprobe it into your system. The easiest way I know to do this is go to your Linux source tree, make xconfig (or menuconfig), select to configure loop device support as a module, make modules, and make modules_install. You may want to compile it into your kernel (not as a module) ....
Stop bumping old threads....
Cheers
Sent from my i9003 powered by Cyanogenmod 7
Thread Closed, Test Phase is over now
New Thread:
http://forum.xda-developers.com/micromax-a110/development/rom-mmx-a110-t2972561
Hi all
Thread in construction .... not much time now
FOR Developers ONLY
Rules:
- No requests
- No Spamm
- No "port to my device" spamm "
KitKat is now Booting on MTK 6577, only few bugs left to be fixed.
New Kernel is required of course.
For Now its booting on my some mt6577 devices
Im opening this thread on behalf of QUS1
--> I'll support this development also (im working on the build for ZTE v970)
IF, you wish to adapt (THIS IS NO copy/paste PORT), real work to be made. Then share your work here, and maybe you can work the rom to your device also...
KITKAT s9081 BETA1
** post for developers and alpha testers **
This is built from MTK s9081 project, and its possible to adapt to:
-MICROMAX a110
-WIKO CINK KING
-Fly IQ450 Horizon
may be more modifications
RECOMENDATION RECOVERY FOR INSTALLATION:
http://droid-devz.com/viewtopic.php?f=8&t=482
DOWNLOAD:
(beta1 port from MotorolaRAZR D3 XT920) By: Qus1
https://yadi.sk/d/a3OYnZKPckNi3 too many downloads, re-upload to google drive for alternative link here https://drive.google.com/file/d/0B9Xy2GDF0is9RlhiNGtmTGloZjg/view?usp=sharing
TEST PATCHES:
patch for kernel 1.2
if ur revision ics - https://yadi.sk/d/3gDqwFQpcqEQg camera OV8825, OV8826
if ur revision jb - https://yadi.sk/d/sa555YnocqESA camera OV8825, OV8827
(MY ZTE v970 build will be posted on another thread)
its would be good to add more developers 6577 for kk :laugh:
GPL Compliance:
ZTE v970 (will upload in some hours /tomorow ...)
https://github.com/dragonpt/Kernel_3.4.67_KK_ZTE_v970
Wiko Cink King
https://github.com/qus1/s9081_kk_beta1
Regards
XDA:DevDB Information
[ROM][WIP]KITKAT s9081 , ROM for the Micromax A110
Contributors
superdragonpt, qus1
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP / MTK
Version Information
Status: Alpha
Created 2014-11-18
Last Updated 2014-12-13
Reserved
Kernel Goodies / Info
Kernel Info:
New Custom Kernel to support KitKat
kernel version: 3.4.67
Governors available:
Hybrid <--Default
ondemand
userspace
powersave
performance
I/0 Schedulers available:
cfq <-- Default
noop
deadline
TCP Congestion Control:
cubic <-- Default
reno
bic
westwood
highspeed
hybla
htcp
vegas
veno
scalable
Ip
yeah
illinois
Other Kernel Features:
ZRAM <-- Enabled as Default
SDCard Read Ahead 128KB
F.A.Q.
Q: How can i acess the MTK Engineering Menu?
A: On the dialer : *#*#3646633#*#*
Q: What Can i do, on the MTK Engineering Menu?
A: The Engineering Menu, should be for Advanced users only, there's several things you can do.
a) Increase The volume speaker volume: >hardware testing>Audio>LoudSpeaker Mode> And set MAX Vol with an max value of 160 (145 as safe)
b) The same options, as in JellyBean MTK Eng Menu.
Q: What are the Partitions Layouts usable on This ROM/KitKat ?
A: BOTH Partitions are usable (Stock and Extended), however on stock Partition Layout, the Internal SDCard can´t be used as is not visible due to the new KitKat fstab (partition table)
--> It is possible to swap internal and external storages, apply the patch by :Akhilendra Gadde HERE
Q: My 2G / 3G Network doesn't show , what can i do?
A: You must change the current modem on the rom, check This reply
Q: I have the Extended Userdata Partition Layout, do i need to flash any disabled Internal SDCard?
A: NO, There's nothing you need to do or flash
Q: Is this ROM Multi-Language ?
A: Yes
Q: How can i change the Kernel Settings (Governors/ etc) ?
A: You can download any app from the PlayStore, i recommend the Trickster MOD
Q: Where are the Developer Options?
A: Go to Settings>About Phone, and tap 7 times on the Build Number
Q: Where can i change the Android Runtime from Dalvik to ART and vice-versa?
A: You can change on the Developer Options
Q:I changed the Android Runtime from Dalvik to ART and app "x" is not working , why?
A: That's rather normal, not every app is compatible with ART.
Q: Is Xposed Framework and his modules compatible with ART?
A: NO, Xposed Framework and his modules (like GravityBox), are not compatible with ART
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay qus1 and me an beer(s) :fingers-crossed:
superdragonpt said:
Screens:
Click to expand...
Click to collapse
wooww sir giving it a try...on a110
EDIT:- Just want to clarify is it a sorce built or a port
Man is it working on your phone
WELCOME BACK Superdragonpt!
qus1, good to see you here on XDA.
Damn Excited! All the best
All the best developers! Please get 4.4 for c2 !
Faaiz Puthawala said:
wooww sir giving it a try...on a110
EDIT:- Just want to clarify is it a sorce built or a port
Click to expand...
Click to collapse
Kernel: built from source
ROM: ported
The wiko build works on MMX a110
How to flash:
Flash just like any other ROM.
What works:
Pretty much everything
Not working/ needs more work:
Internal SD not recognized in some hardware revisions ( emmc NAND)
Camera works depending on the hardware revision...( Kernel related)
ART ( can be Buggy , this is MTK Fault)
You tell me
Qus`s Kernel works on mmx a110, only some things needs to be fixed...
Dont forget to thank qus1
Regards
superdragonpt said:
The wiko build works on MMX a110
How to flash:
Flash just like any other ROM.
What works:
Pretty much everything
Not working/ needs more work:
2G (3G works)
Internal SD not recognized
Camera ( Kernel related)
ART ( Buggy , this is MTK Fault)
You tell me
Qus`s Kernel works on mmx a110, only some things needs to be fixed...
Dont forget to thank qus1
Regards
Click to expand...
Click to collapse
sir i dont know why
But My back camera works
Internalsdcard also works
ART Also working Well
And dont know About 2G As I dont have A Data Plan
EDIT:-2G also works...almost bugless rom only proximty not working
Thanks for The feedback, edited The -not working- list
Test as you can, your feedback is important,.
Qus1 is working with The wiko build.
Im working on The ZTE V970 build, and will help The MMX build as i can... Along with qus1
Regards
Final Review Of The Rom
The Original Zip Was Not Working With TWRP v2.7.1.0+.But Was Getting Installed With Twrpv2.5.0.0
And There Were Errors Like
Rear Cam,2G Not Working And More
Just moddified The Zip And Gets Installed On TWRP V2.7.1.0
And Only Proximaty Sensor Not Working
Will Upload The Zip Till Tomoorow
finally our savior is back
bro if you need alpha or beta tester you can count on me PM with the zip folder so i can test on my zte v970 (tmn a18)
Faaiz Puthawala said:
Final Review Of The Rom
The Original Zip Was Not Working With TWRP v2.7.1.0+.But Was Getting Installed With Twrpv2.5.0.0
And There Were Errors Like
Rear Cam,2G Not Working And More
Just moddified The Zip And Gets Installed On TWRP V2.7.1.0
And Only Proximaty Sensor Not Working
Will Upload The Zip Till Tomoorow
Click to expand...
Click to collapse
Use CWM ...
TRWP should work just fine,,, i don't know how these "twrp builds" where made...
Regards
superdragonpt said:
Use CWM ...
TRWP should work just fine,,, i don't know how these "twrp builds" where made...
Regards
Click to expand...
Click to collapse
Sir tried on CWM too...there was same error while installing
after moddifying it worked fine
qus1 made an new patch for camera and sensors
check OP
Report
Got an error while flashing using "[RECOVERY] TWRP 2.7.1.0 touch recovery [selinux][source built] by bindassdost"
then,
Wiped all the partitions thrice
rebooted the recovery
and flashed the zip again using same recovery,
but this time it got installed successfully and Rom booted.
....
What Works!!
Both Internal and External SD
3G Works on Both SIMS
Front Camera and Rear Camera Working(After applying Patch)
Proximity Sensor(but little buggy)
....
What Doesn't!!
2g Network Not working (Sim Card Goes Inactive)
Notification LED is not working(works only while charging)
....
Navigation Keys occupies little screen space and it is bit annoying as we already have softkeys. Req dev, pls remove the nav bar.
No SIM Management in System Settings(no facility to turn sim's on/off)
....
Rest all cool and now a proud owner for C2. Hopefully All the remaining bugs will get fixed soon too!! Thanks a ton dev for all the hardwork
can someone make a rom for alcatel 997d?
http://forum.xda-developers.com/showthread.php?t=1981692&page=114
walter91 said:
can someone make a rom for alcatel 997d?
http://forum.xda-developers.com/showthread.php?t=1981692&page=114
Click to expand...
Click to collapse
Sir read the OP no porting spam
---------- Post added at 01:17 AM ---------- Previous post was at 01:16 AM ----------
Will try this on MyPhone A919 duo clone of MMX A110 and C2, etc *crossing-finger*
---------- Post added at 01:19 AM ---------- Previous post was at 01:17 AM ----------
superdragonpt said:
Use CWM ...
TRWP should work just fine,,, i don't know how these "twrp builds" where made...
Regards
Click to expand...
Click to collapse
do we need to use the selinux version of CWM for this? e.g ->http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175 Bindassboost cwm for kitkat? or any CWM nad TWRP work? hehe enlighten us sir
---------- Post added at 01:57 AM ---------- Previous post was at 01:19 AM ----------
Works on MyPhone A919 duo! MMX A110 clone, all camera is working, but the rest to follow
not working usb storage for phone storage cant be seen on computer when mounted the rest works fine will test for a day though
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Open Sourcing Mediatek - ZTE v970 ; SoC MT6577
MediaTek Development
Being owner of an Mediatek device, means (most of the times) not having the sourcecode published by the Official vendor.
ZTE never published their ICS / JB sources (they only gave us incompleted, and unbuildable sources).
--> Well ... This is XDA after all .....
WELCOME to KitKat
Hello Guys !
In this thread you will find my Rom and Kernel for the ZTE v970 / v970m / Smart a18 (Portuguese Single-SIM version)
Please be sure to read (and re-read) carefully, to avoid unnecessary questions.
Rom and Kernel INFO:
ROM: KitKat 4.4.2 [ KOT49I ]
Custom Kernel : 3.4.67 [MTK KitKat Kernel]
About the Rom:
Rom based on the Official Release by Motorola XT919 / XT920
Its now Ported to our Device
Starting from v1.2 , most things are now compiled from modified customizable source-code.
Many fixs where required for making work on our Combo-Chip [MT6620 - Responsible for the Radio / GPS / WiFi / etc]
Includes: Brand New Custom KitKat Kernel 3.4.67
Changelogs :
Changelog v Stable 1.2 (February 15 2015)
This is an huge Update, several things on the rom are now compiled from source...
New Kernel
Updated Camera configs / Lens / Hall to be "in-line" with the new rom camera libs.
Rom
Fix : Camera Hall / image / Lens / Sensors (camera now with 8MPX; interpolated )
Fix : Camcorder
Fix : Improved rom, with several things now being compiled from source for our ZTE (no more dirty hacks)
Fix: Some SE Linux Permissions on AROMA installer
General Rom Clean
APKs zipaligned
NOTE: In order to have the proper camera preview, be sure to "tick" on camera settings the "ZSD" Option
NOTE 2: Due to the major changes on the rom itself, it is strongly recommended, that you don't dirty flash.
--> Be sure to backup your things, and make all wipes, then install this build.
Changelog v Stable 1.1 R2(January 27 2015)
Now compiled with the latest Linaro Toolchain 4.9.3
New compilation Flags and MOD Flags: Neon; Cortex a9; arm v7; Linaro's 4.7+ / 4.9.x Flags; fgcse-las; etc
User Customizable AROMA Installer:
Single/Dual SIM Selection
Baseband Selection (Europe/USA/ JB Baseband **** Europe/USA 2 (Old ICS Modem) **** Venezuela (MoviStar) Baseband+APN's)
Root Selection (Choose to apply Root, or stay un-rooted)
ADD: CPU Governors: Sakuractive (Optimized HotPlug Governor)
ADD: I/O Schedulers: ROW and SIO
REMOVED: Motorola's FLEX Info (merged lingfude's patch)
Minimum Readahead increased to 32Kb (16 > 32)
Maximum Readahead increased to 1024Kb (128 > 1024)
Completely Fair Scheduler (CFS): Responsiveness Tweeks
Dynamic management of dirty page writebacks (Fully controlled via Settings > Performance Control )
Increase Swappiness to 70 (60 > 70)
Disable Gentle Fair Sleepers (Better UI responsiveness)
FIX: Headset Driver (Music/ on-Call Volume Buttons)
FIX: Network Data Meter (Mobile Data and Wifi)
FIX: Green LED when Charging > 90% (merged lingfude's patch)
-WIP- FIX: Camera (Improved Camera colours with the new re-compiled camera .blobs, still - WIP - ); also (merged qus1's camera patch)
Changelog v Stable 1.1 (January 25 2015)
--Removed from downloads due to issues--
Now compiled with the latest Linaro Toolchain 4.9.3
New compilation Flags and MOD Flags: Neon; Cortex a9; arm v7; Linaro's 4.7+ / 4.9.x Flags; fgcse-las; etc
User Customizable AROMA Installer:
Single/Dual SIM Selection
Baseband Selection (Europe/USA/ JB Baseband and Venezuela (MoviStar) ICS Baseband+APN's)
Root Selection (Choose to apply Root, or stay un-rooted)
ADD: CPU Governors: Sakuractive (Optimized HotPlug Governor)
ADD: I/O Schedulers: ROW and SIO
ADD: Multi-User Support (Settings> Users); Check F.A.Q for more Info
REMOVED: Motorola's FLEX Info (merged lingfude's patch)
Minimum Readahead increased to 32Kb (16 > 32)
Maximum Readahead increased to 1024Kb (128 > 1024)
Completely Fair Scheduler (CFS): Responsiveness Tweeks
Dynamic management of dirty page writebacks (Fully controlled via Settings > Performance Control )
Increase Swappiness to 70 (60 > 70)
Disable Gentle Fair Sleepers (Better UI responsiveness)
FIX: Headset Driver (Music/ on-Call Volume Buttons)
FIX: Network Data Meter (Mobile Data and Wifi)
FIX: Green LED when Charging > 90% (merged lingfude's patch)
-WIP- FIX: Camera (Improved Camera colours with the new re-compiled camera .blobs, still - WIP - ); also (merged qus1's camera patch)
Changelog v Stable 1.0 (December 18 2014)
FIX: Bluetooth (thanks qus)
FIX: SIM Management (now working, and available on Settings)
Added: MTK Eng. Mode on Settings
Added: CPU Performance Control on Settings
Added: AOSP Browser (Google replaced AOSP Browser with Chrome since KK Release)
Changelog v Beta 2 (December 11 2014)
AROMA Installer
New Kernel
FIX: Calls under 3G Network (merged patch)
FIX: Camera AF (Auto-Focus)
FIX: "Automatic Time Zone" FC (com.android.phone) error.
FIX: Device Default USB Name (Device name-Mass Storage)
MOD: Modified KK Permissions to allow apps/data to read/write from External SD Card (Google Removed External SD Card acess on KK)
Cleaned: Unused Telephony .blobs
Added: Default KK Music app (was broken, so i didn't added on Beta1)
Added: modified HOSTs (no more adds from apps spaming you...)
Added: CPU Governor : SmartAss V2 (modified for Dual-core ARM)
Added: CPU Governor : PegasusQ (modified for DUAL-Core ARM)
Changelog v Beta 1 (November 29 2014)
First Beta Release
Current Rom and Kernel Status:
Working:
- Telephony (Calls / etc) (2G and 3G)
- Data Connection 2G / 3G
- ART / Dalvik
- FM Radio
- GPS
- Wifi and Wifi Theter
- Bluetooth
- Sensors
- LED's
- Camera / Camcorder
- Pretty much everything is working just fine ...
Needs Improvements:
- You Tell me
GPL Compliance:
Kernel 3.4.67 KK
https://github.com/dragonpt/Kernel_3.4.67_KK_ZTE_v970
I do respect the GPL, but using someone else's work without proper credits is just LACK OF RESPECT.
The inclusion of this kernel in other [future] ROMS is NOT allowed.
--> Instead add a link to this thread as a recommendation on your thread.
The MT6620 Combo-Chip Patchs can of course be used by enyone else trying to work on another device with the same SoC and Combo-Chip,
--> Just show some Humanity and give credits for the work i made ...
I Don't support KANGS!
So please Show some respect, when using my commits and patchs, as well as the commits i added from other Dev's (with proper credits/ git authorization)
Fail to comply and i will drop this project
Credits:
superdragonpt
qus1 , for the initial Help / RAW Original Motorola Rom / Being an nice guy
I would also like to thank:
bgcngm , for the MTK unpack / repack kernel scripts
lingfude , for the original GT818B Driver work, on the old JB Kernel --> Driver backported to this KK build / Auto-time zone fix
Christopher83, for Linaro Toolchains and Dynamic management of dirty page writebacks
amarullz, for the awesome Aroma Installer
Chainfire, for the SuperSU
XDA:DevDB Information
[ROM] [KERNEL] [KITKAT KOT49I ] ZTE V970 / V970M [MT6577], ROM for the Android General
Contributors
superdragonpt
Source Code: https://github.com/dragonpt/Kernel_3.4.67_KK_ZTE_v970
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP / MTK
Version Information
Status: Stable
Current Stable Version: 1.2
Stable Release Date: 2014-12-18
Beta Release Date: 2014-11-29
Created 2014-11-29
Last Updated 2015-03-21
How to Install / Requirements
Requirements:
- New CWM or TWRP Recovery ( In The Downloads Section)
--> I Recommend TWRP
- Extended Internal UserData Partition (due to the new KK fstab, the internal Memory can't be mounted)
(Users with stock Partition Layout, can still flash this rom, however you'll have only 500MB of userdata)
Installation / Flashing Procedure:
- Put the rom on the EXTERNAL SD Card
- FULL Wipes are mandatory (Cache/dalvik/Data)
- Flash the ROM
Since Rom Build Stable 1.1: You have an customizable AROMA Installer:
Choose Single/ Dual SIM
Choose BaseBands Modems
Choose to Root/ Stay un-rooted
Downloads:
Downloads are on XDA DevDB
or
On my Dev-Host
KitKat_ZTE_v970_Stable_1.2.zip - 297.48 MB
On my AndroidFileHost
https://www.androidfilehost.com/?fid=95916177934534755
Have Funn
Kernel Goodies / INFO
Kernel Info:
New Custom Kernel to support KitKat
kernel version: 3.4.67
Governors available:
Hybrid <--Default
ondemand
userspace
powersave
performance
pegasusq (Add on Beta2)
smartassv2 (Add on Beta2)
Sakuractive (Add on Stable 1.1)
I/0 Schedulers available:
cfq <-- Default
noop
deadline
sio (Add on Stable 1.1)
row (Add on Stable 1.1)
TCP Congestion Control:
cubic <-- Default
reno
bic
westwood
highspeed
hybla
htcp
vegas
veno
scalable
Ip
yeah
illinois
Other Kernel Features:
ZRAM <-- Enabled as Default
SDCard Minimum Readahead 32 Kb / Maximum Readahead 1024Kb
Dynamic management of dirty page writebacks
You can check all the Custom Changes on my GitHub Repo
F.A.Q
Q: How can i acess the MTK Engineering Menu?
A: On the dialer : *#*#3646633#*#*
OR --> Settings > MTK Eng. Mode ( added on Stable 1.0)
Q: What Can i do, on the MTK Engineering Menu?
A: The Engineering Menu, should be for Advanced users only, there's several things you can do.
a) Increase The volume speaker volume: >hardware testing>Audio>LoudSpeaker Mode> And set MAX Vol with an max value of 160 (145 as safe)
b) The same options, as in JellyBean MTK Eng Menu.
Q: What are the Partitions Layouts usable on This ROM/KitKat ?
A: BOTH Partitions are usable (Stock and Extended), however on stock Partition Layout, the Internal SDCard (~2GB) can´t be used as is not visible due to the new KitKat fstab (partition table)
Q: I have the Extended Userdata Partition Layout, do i need to flash any disabled Internal SDCard?
A: NO, There's nothing you need to do or flash
Q: Is this ROM Multi-Language ?
A: Yes
Q: How can i change the Kernel Settings (Governors/ etc) ?
A: You can download any app from the PlayStore, i recommend the Trickster MOD
Q: Where are the Developer Options?
A: Go to Settings>About Phone, and tap 7 times on the Build Number
Q: Where can i change the Android Runtime from Dalvik to ART and vice-versa?
A: You can change on the Developer Options
Q:I changed the Android Runtime from Dalvik to ART and app "x" is not working , why?
A: That's rather normal, not every app is compatible with ART.
Q: Is Xposed Framework and his modules compatible with ART?
A: NO, Xposed Framework and his modules (like GravityBox), are not compatible with ART
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay me an beer(s) :fingers-crossed:
Recovery
Is the recovery touch? My power button doesn't work. Thanks in advance
YEAYY!! Finally!! 4.4 for zte v970!!
THANKS BRO!! all the best
Downloading atm... will reply with my feedback
1st thing, Recovery when you put to reboot he go to the main menu of the recovery ALL THE TIME...
2nd i made all the steps and went well but in this ROM i cant get the expandable storage, with the previous roms i always got the expandable storage but with this one dont :\
any help on that?
3rd i made the expandable thing to my mobile, and i found 1 issue! when you made a call you CANT HEAR ANYTHING but the call IS MADE STILL i made a backup before doing the file for expand, i restored and now is fine the sound...
3rd a) i found out that if you put network to 2G the sound can be heard on the speaker when you made a call
StuffiLike said:
Is the recovery touch? My power button doesn't work. Thanks in advance
Click to expand...
Click to collapse
Yes, it is the recovery Touch.
I'm testing this rom, at the moment is going very good and smooth! Will edit later if i find any bugs.
Great work and thanks!
Thank you, good job.
If the file is copied platform.xml to etc/permissions/platform.xml you will be able to install applications to the SD card.
View attachment platform.7z
Hi
I'll be uploading an new recovery ( Twrp ) tomorrow, since cwm can be an buggy sometimes on KK. ( reboot doesn't work sometimes on recovery)
Edit: I can confirm that on calls, on 3G you cant hear the other person (Edit the OP with this info)
On 2G calls works just fine
Regards, have funn
It's very laggy in my ZTE.
Am I the only one?
EDIT: Not laggy now, all is correct. Thank you superdragon!
Juanjose1 said:
It's very laggy in my ZTE.
Am I the only one?
EDIT: Not laggy now, all is correct. Thank you superdragon!
Click to expand...
Click to collapse
No problem haha
It's actually as smoother as JB4.1 or even slightly better.
--> KitKat uses less RAM (any 512MB RAM Phone can run it just fine), you'll see that KK gives you more free Ram, than any JB/ICS Rom.
Regards
EDIT: F.A.Q. and Kernel Features added on OP and following posts...
EDIT 2: New TWRP Recovery added (Its better than CWM ...)
Yes, KK's very stable on my devive(512mb ram). Compared to JB 4.1/4.2, it give more free ram. Don't lags, don't crashes. Amazing!!
Many thanks to superdragonpt you are great!!
yournametv said:
Yes, KK's very stable on my devive(512mb ram). Compared to JB 4.1/4.2, it give more free ram. Don't lags, don't crashes. Amazing!!
Many thanks to superdragonpt you are great!!
Click to expand...
Click to collapse
Hi Yournametv
Yes KitKat runs very good on 512MB, i know, becouse i have another thread, Rom KitKat for micromax a110, and that phone only haves 512MB. and runs smooth
This is still "Beta" , becouse its the first release, but im my opinion, the rom, runs great.
I've been testing this rom for some days, and no big issues.
Please, feel free to share you feedback about the rom, im very Curious to know how's it runs on 512MB.
If you play any heavy game (RAM consuming) please share your feedback here.
Also try to play heavy games, that didn't worked on ICS/JB, KK is more light ...
EDIT: One of the bugs, seems to be fixed: Calls on 3G, i'll post later an patch for you all
Regards
thanks for bringing kitkat to this device
this rom is awesome for 512 ram device, after install full apps it left more 200mb free of ram, that was impossible in JB ,
I could moothly surfing heavy website in chrome, switch moothly to other mutitasking apps, I've never ever done it in lewa or JB. this rom make me love my phone more,
could you make a option to choose which sim to be used in 3nd message/dialer apps please? thanks in advance :victory:
BIg Games
Works fine with ''big games'' :good: . Tested:
- Boom Beach
- Candy Crush Soda Saga
- Clash of Clans
Thank you Superdragon!
EDIT: I'm in ZTE Grand XM (1GB RAM), 512 MB to play xD
calls under 3G Network
Ok , i heavly tested the new patch yesterday, and its now fixed.
Just bare with me, i'll upload the patch, as soon as i find some free time.
Im the time being, you can switch to 2G to make calls.
Regards
No sound during calls
Hi all,
I've just installed this ROM and (as for your previous ROM'S for v970) I want to congratulate (and thank) you on your work, the ROM's are pretty stable and smooth.
However, in this ROM I'm faced with an annoying problem in which when I make/receive calls the other person can hear me but I can't hear anything. I already tested the recording app so it is not certainly an hardware problem. I installed the ROM with TWRP and on the second boot installed superSU as instructed. I got no error messages whatsoever and all the other features seems to work as announced.
I have the v970 version with a single SIM (tmn version). Does anyone has/solved this problem?
Sorry, did not read all the posts previously, forcing the 2G solved it. My bad. Keep up the good work.
Thanks,
Best regards,
André Farinha
Patch 3G calls
Hi
You can now, download the patch for 3G calls
Check download section.
In recovery:
wipe cache and Dalvik
Flash the patch
enjoy
Regards
superdragonpt said:
Hi
You can now, download the patch for 3G calls
Check download section.
In recovery:
wipe cache and Dalvik
Flash the patch
enjoy
Regards
Click to expand...
Click to collapse
Tested patch to 3G, Works fine!
Thank you superdragon to port KitKat for this device; it was forgotten..
I want to congratulate you for great job!.
Droidvpn and troidvpn not working by problem "Tun Socket"
No problem for the moments, ty!
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
WELCOME to KitKat
The builds are made by qus1 and superdragonpt, take into consideration neither one of us own this device.
GPL kernel(s) on both different branch's can be checked on our github pages
See more on "GPL Compliance" down.
Hello Guys !
In this thread you will find my Rom and Kernel for the Micromax a110 / MyPhone/ Wiko CINK KING/ QMobile a10
Please be sure to read (and re-read) this carefully, to avoid unnecessary questions.
Rom and Kernel INFO:
ROM: KitKat 4.4.2 [ KOT49I ]
Custom Kernel : 3.4.67 [MTK KitKat Kernel]
About the Rom:
Rom based on the Official Release by Motorola XT919 / XT920
( since February 2015) part of the ROM is made from our customized custom source code .)
Includes: Brand New Custom KitKat Kernel 3.4.67.
Changelogs :
Changelog v Stable 1.1 (Feb 14 2015)
User Customizable AROMA Installer:
Single/Dual SIM Selection
Baseband Selection (India / Pakistan / Europe Basebands)
Root Selection (Choose to apply Root, or stay un-rooted)
New Kernel:
Now compiled with the latest Linaro Toolchain 4.9.3
New compilation Flags and MOD Flags: Neon; Cortex a9; arm v7; Linaro's 4.7+ / 4.9.x Flags; fgcse-las; etc
New Modified ALSPS (Prox-Sensors) Drivers, in order to AUTO-Detect the sensor in-use on your Hardware Revision
Camera: Now using the proper camera sensor(8825), no more hacks using the (8835) stock Moto's Camera...
Camera: Now using proper Camera HALL/ and kernel camera's configs
Camera: New ov8825 LENS (using the native one, should increased the AF / reduced camera noise)
OTG: Enable Initial OTG Configs
ADD: CPU Governors: Sakuractive (Optimized HotPlug Governor)
ADD: I/O Schedulers: ROW and SIO
Minimum Readahead increased to 32Kb (16 > 32)
Maximum Readahead increased to 1024Kb (128 > 1024)
Completely Fair Scheduler (CFS): Responsiveness Tweeks
Dynamic management of dirty page writebacks (Fully controlled via Settings > Performance Control )
Increase Swappiness to 70 (60 > 70)
Disable Gentle Fair Sleepers (Better UI responsiveness)
ROM:
Add proper OTG permissions
Add new Camera . libs compiled from source (these are not the same as the ones compiled by qus)
ADD other misc libs compiled by source
FIX: Green LED when Charging > 90% (merged lingfude's patch)
REMOVED: Motorola's FLEX Info (merged lingfude's patch)
The Default AROMA install is for: India Baseband / Kernel JB Camera HW Revision / Dual-SIM
ICS CAMERA HW Users: Flash the Alternative Kernel
KitKat_MMX_a110_Stable_1.1.zip - 313.83 MB
Kernel_mmx_a110_Stable_1.1_ICS.zip - 4.00 MB
ChangeLog Beta4 ( qus1 build) Feb. 10 2015
New kernel
Fix camera Auto-Focus / Fix camera with new compiled .libs from source ( by qus1)
Fix sim-managment ( merged superdragonpt patch)
Fix green led when charging >90% ( merged lingfude patch)
Includes all kernel patch's from superdragonpt's github branch-master until Feb 09 2015 ( check superdragonpt github commit history)
full re-build project
Download:
beta4-2
for beta4, old version. / Kernel patch's for others hardware revisions
patch-beta4 for alsps 36283, touch 5316
patch-beta4 for alsps 3607, touch ft5316_5p
beta4-2 default kernel: for alsps 3607, touch ft5316_5p.
If you have another hardware, just install the proper kernel patch for beta4
Changelog v Stable 1.0 (December 26 2014)
New Kernel
FIX: GPIO/Headset/Volume Buttons, Kernel Drivers
FIX: ALSPS (Prox. Sensor) - Auto-Detection of diff ALSPS, This will also avoid the compilation of an 3rd HW Kernel Revision
FIX: SIM Management (now working, and available on Settings)
FIX: GPS (Improved, auto-detection of the right Combo-Chip)
Added: MTK Eng. Mode on Settings
Added: CPU Performance Control on Settings
Added: AOSP Browser (Google replaced AOSP Browser with Chrome since KK Release)
General Rom Clean
Changelog v Beta 2 (December 14 2014)
AROMA Installer
New Kernel
FIX: Network Modem/Baseband (merged patch)
FIX: ON Screen Buttons
FIX: Device Default USB Name (Device name-Mass Storage)
MOD: Modified KK Permissions to allow apps/data to read/write from External SD Card (Google Removed External SD Card acess on KK)
Cleaned: Unused Telephony .blobs
Added: Default KK Music app (was broken, so i didn't added on Beta1)
Added: modified HOSTs (no more adds from apps spaming you...)
Added: CPU Governor : SmartAss V2 (modified for Dual-core ARM)
Added: CPU Governor : PegasusQ (modified for DUAL-Core ARM)
General Clean on the rom...
Changelog v Beta 1 (November 18 2014)
First Beta Release by qus1
Current Rom and Kernel Status:
Working:
- Telephony (Calls / etc) (2G and 3G)
- Data Connection 2G / 3G
- ART / Dalvik
- FM Radio
- Bluetooth
- GPS
- Wifi and Wifi Theter
- Sensors
- LED's
- Pretty much everything is working just fine ...
Not Working:
- You tell me ...
GPL Compliance:
Kernel 3.4.67 KK
superdragonpt Github Repo - Branch Master
qus1 Github Repo- Branch Master
I do respect the GPL, but using someone else's work without proper credits is just LACK OF RESPECT.
The inclusion of this kernel in other [future] ROMS is NOT allowed.
--> Instead add a link to this thread as a recommendation on your thread.
I Don't support KANGS!
So please Show some respect, when using qus1 and my commits and patchs, as well as the commits i added from other Dev's (with proper credits/ git authorization)
Fail to comply and i will drop this project
Rules
- Don't ask for ETA (that's rude), i do work for an living, and this things are very time consuming.
- Search in the thread, before asking something, Keep of the spamm
- Be Polite
- Don't ask me to "port" the rom and Kernel to Phone "x", im already maintaining this rom and kernel (and i don't own this device)
Credits:
qus1 , for the initial BETA1 / Beta1 Kernel tree / Being an nice guy
superdragonpt
I would also like to thank:
bgcngm , for the MTK unpack / repack kernel scripts
XDA:DevDB Information
[ROM] [KERNEL] [KITKAT 4.4.2 - KOT49I ] MMX a110 [MT6577] , ROM for the Micromax A110
Contributors
superdragonpt, qus1
Source Code: https://github.com/dragonpt/Kernel_3.4.67_KK_MMX_a110
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: KK Recovery
Based On: AOSP / MTK
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-12-26
Current Beta Version: 2.0
Beta Release Date: 2014-12-14
Created 2014-12-14
Last Updated 2015-02-14
How to Install / Requirements
Requirements:
- New CWM or TWRP Recovery
--> I Recommend This One
- Extended Internal UserData Partition (due to the new KK fstab, the internal Memory can't be mounted)
(Users with stock Partition Layout, can still flash this rom, however the internal SDCard can't be used
Installation / Flashing Procedure:
- Put the rom on the EXTERNAL SD Card
- FULL Wipes are mandatory (Cache/dalvik/Data/System)
- Flash the ROM
-If you wish, reboot to the recovery first, and flash the SuperSU.zip in order to ROOT the Device (ROM isn't rooted as default), After flashing the supersu.zip, reboot the Phone, Say "NO" IF the Recovery Promp about Root not instaled/damaged
[*]--> You can find the latest SuperSU Root .zip HERE
Kernel Goodies / F.A.Q / Misc INFO
Kernel Info:
New Custom Kernel to support KitKat
kernel version: 3.4.67
Governors available:
Hybrid <--Default
ondemand
userspace
powersave
performance
pegasusq (Add on Beta2)
smartassv2 (Add on Beta2)
I/0 Schedulers available:
cfq <-- Default
noop
deadline
TCP Congestion Control:
cubic <-- Default
reno
bic
westwood
highspeed
hybla
htcp
vegas
veno
scalable
Ip
yeah
illinois
Other Kernel Features:
ZRAM <-- Enabled as Default
SDCard Read Ahead 128KB
F.A.Q.
Q: How can i acess the MTK Engineering Menu?
A: On the dialer : *#*#3646633#*#*
Q: What Can i do, on the MTK Engineering Menu?
A: The Engineering Menu, should be for Advanced users only, there's several things you can do.
a) Increase The volume speaker volume: >hardware testing>Audio>LoudSpeaker Mode> And set MAX Vol with an max value of 160 (145 as safe)
b) The same options, as in JellyBean MTK Eng Menu.
Q: What are the Partitions Layouts usable on This ROM/KitKat ?
A: BOTH Partitions are usable (Stock and Extended), however on stock Partition Layout, the Internal SDCard can´t be used as is not visible due to the new KitKat fstab (partition table)
--> It is possible to swap internal and external storages, apply the patch by :Akhilendra Gadde HERE
Q: Is this ROM Multi-Language ?
A: Yes
Q: How can i change the Kernel Settings (Governors/ etc) ?
A: You can download any app from the PlayStore, i recommend the Trickster MOD
Q: Where are the Developer Options?
A: Go to Settings>About Phone, and tap 7 times on the Build Number
Q: Where can i change the Android Runtime from Dalvik to ART and vice-versa?
A: You can change on the Developer Options
Q:I changed the Android Runtime from Dalvik to ART and app "x" is not working , why?
A: That's rather normal, not every app is compatible with ART.
Q: Is Xposed Framework and his modules compatible with ART?
A: NO, Xposed Framework and his modules (like GravityBox), are not compatible with ART
Q:Where are the Downloads?
A: Downloads are on the XDA DevDB Downloads TAB HERE
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay qus1 and me an beer(s)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PATCHS / Downloads:
Downloads are on the XDA DevDB Downloads TAB HERE
Mirror on my Dev-Host:
KitKat_MMX_a110_Stable_1.0.zip - 285.07 MB
The Kernel included in the Rom, is for JB (out-of-the-box) Revision
For ICS Revision (diff Camera sensors / HAL) Flash this kernel:
Kernel_mmx_a110_Stable_1.0_ICS.zip - 4.00 MB
Beta2 Downloads:
Mirror On my Dev-Host:
KitKat_a110_BETA2.zip - 296.02 MB
The Kernel included in the Rom, is for JB (out-of-the-box) Revision
For ICS Revision (diff Camera sensors / HAL) Flash this kernel:
Kernel_mmx_a110_BETA2_ICS.zip - 4.01 MB
For C2 Revision (diff ALPS- Proximity Sensor) Flash this kernel:
Kernel_mmx_a110_BETA2_C2.zip - 4.01 MB
Good work sir. Keep 'em coming.
Beta 2 link plzzz
Sir I Can't find the beta 2 ROM AND KERNEL link
help plzzz ,
BTW thanks to qus1 and snapdragonpt for the beta2
---------- Post added at 04:45 AM ---------- Previous post was at 04:41 AM ----------
mdezazrock said:
Sir I Can't find the beta 2 ROM AND KERNEL link
help plzzz ,
BTW thanks to qus1 and snapdragonpt for the beta2
Click to expand...
Click to collapse
sorry for the spell mistake ---// its superdragonpt
XDA DevDB server is having server issues.
For now, im uploading to my Dev-Host ...
For the time being, check F.A.Q / Info
Regards
EDIT:
Downloads are up, on my Dev-Host
Will add them on XDA devDB server, when the server is OK (buggy now...),
it's now 04.30 am here... so i'll try to upload later into the xda server ...
EDIT2:
Of course, since i don't own this device, i can't be 100% sure if the fixs where Successfully implemented
Your Feedback is Important
superdragonpt said:
XDA DevDB server is having server issues.
For now, im uploading to my Dev-Host ...
For the time being, check F.A.Q / Info
Regards
Click to expand...
Click to collapse
Thankyou for your work sir.. my a110 is ICS out of the box.
But "C2 Revision (diff ALPS)" means is it JB out of the box? or something else?
for C2 what ALSPS is use for the proximity? is it still the same? cm307? hope transparent status bar work on this one :fingers-crossed:
thanks! (Y)
@superdragonpt
Nice wrok bro.
I am right now enjoying the beta 1 and I just have 2 queries,
1. Is sim management section in settings available in the beta 2 version?
2. how do i change the 3g setting (that is setting sim 2 to have 3g and changing it back to sim1) in beta1 and beta2?
Thank u , sir
Thank u for making my C2 alive agin.... Downloading the ROM
Also i hope the Whatsapp notification prblm fixed..
Awesome KitKat ROM ....
Cons:
Signal for sim 1 is always too low...
Sim management option missing..
Internal memory card bug
GPS not locking..quickly taking a lot of time
Pros:
Are in abundance ...
First its KitKat...so after waiting for so long ....finally. Breathe of relief...
Xpose is working...
Still testing ...
In the evening will give a detailed review
Sent from my a110 using XDA Free mobile app
to add up from the post above there is still no way to make transparency on status bar
What do you mean by internal sd bug that internal sd not mounting.
review
today you made my day brother
have proud on 2 things :
1. to have MMX a110
AND
2. developer like you
thank for making this rom. i like it very much
i am testing it give you review very soon
1 issue i found is Signal for sim 1 is always too low...
Yup
Sent from my a110 using XDA Free mobile app
sync contact
hello.
i got some problem.
my google contact didn't sync with the phone.
other than that, nothing i guess.
will update later if got more problem.
cheers!
Mine is ICS out of box.
Working:
- USb Teathering working
- Hot spot working
- GPS ( Fixed in google map in 3 seconds), wifi, Bluetooth, camera working.
- Internal and external SD card both are mounting
- Almost every functionality is working
Not working:
- Still status bar is not transparent.
- Sim management is missing for 2nd sim
...........................................................**************************....................................................................
Thanks Dev for this Kitkat Rom
@superdragonpt sir , I feel there is a touch lag issue in my device , I have flashed the required patches and everything
Only thing I'm facing is a touch response and scrolling issue
Please help
Thanx man
For Sunday gift .
Will give review soon
man i think status bar problem is due to launcher.There is a Xposed module for transperency.
Links:
http://repo.xposed.info/module/com.woalk.apps.xposed.translucentstyle
http://repo.xposed.info/module/com.woalk.apps.xposed.ttsb
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Open Sourcing Mediatek - Wiko DarkMoon ; SoC MT6582
MediaTek Development
Being owner of an Mediatek device, means (most of the times) not having the sourcecode published by the Official vendor.
Wiko Never published an proper JB 3.4.5 Kernel Source Code (they only gave us incompleted, and unbuildable sources).
Plus, they never updated this phone (to KK) as promised ...
--> Well ... This is XDA after all .....
WELCOME to KitKat
It should also work without any issues on the clones:
- Micromax a200 Canvas turbo Mini (India, others) --> Confirmed working
- BLU Life Play S ( South / North America) ---> Confirmed working
- Myphone Agua Iceberg Slim ( Philippines , others) --> Confirmed Working
- QMobile Noir A910 ( Pakistan, others ) --> Confirmed working
--> If you guys have any issues on this clones, let me know
--> Should be only a matter of changing the modem
Hello Guys !
In this thread you will find my KitKat Rom and Kernel for the Wiko DarkMoon (Mediatek MT6582 SoC), and clones.
Please be sure to read (and re-read) carefully, to avoid unnecessary questions.
This is an Unofficial Build, so it will NOT be supported by the OEM.
Rom and Kernel INFO:
This is the work of +9 Months of R&D ...
ROM: KitKat 4.4.2 [ KOT49H ]
Custom Kernel : 3.4.67 [KitKat compatible Kernel]
Changelogs :
Changelog v Stable 1.1 (March 30 2015)
- FIX: Volume Down Button (merged previous patch, into current kernel compilation)
- FIX : Several SELinux Issues
- FIX: Front Camera, now working and with 8MPX Max Resolution (Stock Camera is 5MPX)
- Improved: GPS Driver (rewrite the driver)
- Improved: Patch 3 minor Kernel Wakelocks
- Improved: Fuel_Gauge VTABLE: Battery Configs
- Improved: Power Driver (rewrite the driver)
- Add/Improved: CPU Governors: SAKURACTIVE; NIGHTMARE; INTERACTIVEX; ZZMOOVE; LULZACTIVEQ; SMARTASS2; CONSERVATIVE; PEGASUSQ;
- Rom is now Pre-rooted, and BusyBox enabled
Changelog v Stable 1.0 (March 17 2015)
First Open Public Release
Changelog v Public Betas 1 and 2 (March 14 / 15 2015)
Internal Builds
Current Rom and Kernel Status:
Working:
- Telephony (Calls / etc) (2G and 3G)
- Data Connection 2G / 3G
- ART & Dalvik
- USB OTG
- FM Radio
- GPS
- Wifi and Wifi Theter
- Bluetooth and BT Theter
- Sensors
- LED's
- Camera Rear / Camcorder
- Front Camera
Not Working:
- Everything is working just fine
- You tell me
NOTE:
Some units use an extra image sensor on the main (rear) camera
In this units, when taking pictures, sometimes the picture can become "bluish "
Solution: go to: White Balance> and select " Fluorescent".
GPL Compliance:
Kernel Wiko DarkMoon 3.4.67 KK
Github Repo - Branch Master
I do respect the GPL, but using someone else's work without proper credits is just LACK OF RESPECT.
The inclusion of this kernel in other [future] ROMS is NOT allowed.
--> Instead add a link to this thread as a recommendation on your thread.
--> Just show some Humanity and give credits for the work i made ...
I Don't support KANGS!
Fail to comply and i will drop this project
Credits:
superdragonpt
XDA:DevDB Information
[Rom] [Kernel] [Unofficial] KitKat for Wiko DarkMoon [MT6582], ROM for the Android General
Contributors
superdragonpt
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock Rom Modified
Based On: MTK KitKat / AOSP
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2015-03-17
Beta Release Date: 2015-03-14
Created 2015-03-17
Last Updated 2015-04-01
Requirements / How to Install / Downloads
Requirements:
- Make an FULL Backup of your Phone, Everything will be WIPED
- Please Backup your IMEIs via MTKDroidTools and via CarlivTouchRecovery (CTR) <-- Just in case ...
- Download the Modified Stock WIKO JellyBean Rom , this step is mandatory, since you really need to be on stock Base, and without (your) personal modifications.
- Plus it really needs an fresh instalation ...
This modified Stock Wiko Rom, includes Custom Recovery and modified Partitions (needed by KK )
This is done via SPFlashTools (included), and make sure you have the MTK65xx USB drivers installed.
After successfully flashing the Modified Stock Rom, let it boot up (first boot),
Now, put the KitKatRom.zip on your EXTERNAL SD Card.
Turn Off the phone, and boot to the recovery.
Installation / Flashing Procedure:
Wipe Data / Factory Reset
Wipe Dalvik Cache
Mounts and Storage > Format /System
Reboot to Recovery
Flash The ROM.zip
--> Reboot
Downloads:
Modified Stock WIKO JellyBean Rom
https://www.androidfilehost.com/?fid=95916177934542864
Unofficial KitKat Stable v1.1
https://www.androidfilehost.com/?fid=95916177934548180
Old Builds:
Unofficial KitKat Stable v1.0
https://www.androidfilehost.com/?fid=95916177934542863
Kernel Goodies / INFO
Custom kernel version: 3.4.67
Governors available:
HotPlug <-- Default
ondemand
userspace
powersave
performance
sakuractive (Added on v1.1)
nightmare (Added on v1.1)
interactivex (Added on v1.1)
zzmoove (Added on v1.1)
lulzactiveq (Added on v1.1)
smartassV2 (Added on v1.1)
conservative (Added on v1.1)
pegasusq (Added on v1.1)
I/0 Schedulers available:
cfq <-- Default
noop
deadline
row
TCP Congestion Control:
cubic <-- Default
reno
bic
westwood
highspeed
hybla
htcp
vegas
veno
scalable
Ip
yeah
illinois
F.A.Q.
Q: Is this Rom rooted?
A: No, but you can flash the SuperSU.zip on recovery
-> You can find the latest SuperSU Root .zip HERE
-> And don't forget to say Thanks to Chainfire...
A: Yes (Since v1.1)
Q: Is this ROM Multi-Language ?
A: Yes
Q: How can i change the Kernel Settings (Governors/ etc) ?
A: You can download any app from the PlayStore, i recommend the Trickster MOD
Q: Where are the Developer Options?
A: Go to Settings>About Phone, and tap 7 times on the Build Number
Q: Where can i change the Android Runtime from Dalvik to ART and vice-versa?
A: You can change on the Developer Options
Q:I changed the Android Runtime from Dalvik to ART and app "x" is not working , why?
A: That's rather normal, not every app is compatible with ART.
Q: Is Xposed Framework and his modules compatible with ART?
A: NO, Xposed Framework and his modules (like GravityBox), are not compatible with ART
(Xposed for ART is still an W.I.P.)
Q: ART is not working, it always boot into Dalvik, why?
A: Unistall Xposed Framework, it is not compatible with ART, so it'll always force to boot into Dalvik.
Q: Can i revert to stock ROM after ?
A: Sure you can! You just need to flash the Stock Wiko JellyBean 4.2 ROM via SPFlashtools. Or just download the wiko software tool from their site.
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay me an beer(s)
Under construction...
Thanks a lot for you hard work
Patch Volume DOWN Button
Hi
Here's an new kernel:
Fixed the issue with the Volume Down Button.
--> Among other things, you can now take screenshots...
EDIT: Removed.... Merged on Stable v1.1
No wipes required, just flash this on recovery
Also added ROM Screenshots
Regards
Thanks...
Awesome work :good:
You are brilliant
Thank you for your hard work. Everything is working very smooth :good:
Oh my god! I love you! Thanks for this!
OMG Thank you for your work.
A little donation was sent :highfive:
I will test it and give you feedback.
Frontcam is useless for me.
A small bug
When we change network mode in settings->mobilenetwork->change to 2g/3g
Then com.android.phone has stopped...
sivakarthick said:
Awesome work :good:
Click to expand...
Click to collapse
muffinmann said:
Thank you for your hard work. Everything is working very smooth :good:
Click to expand...
Click to collapse
DarthLuda said:
Oh my god! I love you! Thanks for this!
Click to expand...
Click to collapse
T-1311 said:
OMG Thank you for your work.
A little donation was sent :highfive:
I will test it and give you feedback.
Frontcam is useless for me.
Click to expand...
Click to collapse
Thanks Guys.
sivakarthick said:
When we change network mode in settings->mobilenetwork->change to 2g/3g
Then com.android.phone has stopped...
Click to expand...
Click to collapse
Hi there
Everything is fine for me (and for my testers).
I actually know, where that is coming from ... i'll assume you don't own the wiko DarkMoon, but one of his clones?
Thats related with the modem / region... nothing to worry about, thats why i wrote that little note about the modem thing in the OP
Just go to settings>Date & Time and "Untick" the Automatic Time Zone
Them tell me how that works for you ...
Xeers
The location does not work. It's just me?
Edit: after a factory reset it works
Thanks...
superdragonpt said:
Thanks Guys.
Hi there
Everything is fine for me (and for my testers).
I actually know, where that is coming from ... i'll assume you don't own the wiko DarkMoon, but one of his clones?
Thats related with the modem / region... nothing to worry about, thats why i wrote that little note about the modem thing in the OP
Just go to settings>Date & Time and "Untick" the Automatic Time Zone
Them tell me how that works for you ...
Xeers
Click to expand...
Click to collapse
Thank you @superdragonpt
You are correct.. Im using Micromax a200 Canvas turbo Mini.
After unticking automatic time zone,the same problem occurs..
When this error occurs the network is suddenly stopped and scanning once again..
sivakarthick said:
Thank you @superdragonpt
You are correct.. Im using Micromax a200 Canvas turbo Mini.
After unticking automatic time zone,the same problem occurs..
When this error occurs the network is suddenly stopped and scanning once again..
Click to expand...
Click to collapse
Hi
Yes thats related with the region modem.img, nothing to worry about, it's expected.
But it just pops the error, everything comes back to normal after, yes?
regards
superdragonpt said:
Hi
Yes thats related with the region modem.img, nothing to worry about, it's expected.
But it just pops the error, everything comes back to normal after, yes?
regards
Click to expand...
Click to collapse
Yes... You are correct.. It doesnot affect the usability of the phone...
Whether It can be cleared? Whether I need to upload any file from my mobile?
Very Nice, Good work :good:
Hello, devs! I'm not good in English at all, but I'm sure you would understand. I'm owner of such an awesome device as Fly iq4413. It's powered by mt6585m (don't exactly know if it is same chipset as non-m 6582) and it is with 4.4.2 OS stock firmware. There are some parts of available sources for it, so it can be helpful. If any of devs will be interested, let me know. By the way, other specs are 1.3ghz clock, GSM-wcdma baseband, 1gb ram, 4gb overall rom, dual sim, 8mpix rear cam, 2mpix frontal, no m-sensor and no gyroscope (accelerometer presents). Also, in Russian development forum there are a lot of firmwares ported : aosp 4.4.4, flame os (not flyme), miui v5 and miui v6 beta, lewa os and some others.
Upd: as I knew , my device has LOWER screen resolution, so obviously some resources will not be the same
How is speed and battery? Is it ok? Better than original?
Htc Desire 310 have the same specs. Do you recommend for it ?