Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Open Sourcing Mediatek - ZTE v970 ; SoC MT6577
MediaTek Development
Being owner of an Mediatek device, means (most of the times) not having the sourcecode published by the Official vendor.
ZTE never published their ICS / JB sources (they only gave us incompleted, and unbuildable sources).
--> Well ... This is XDA after all .....
WELCOME to KitKat
Hello Guys !
In this thread you will find my Rom and Kernel for the ZTE v970 / v970m / Smart a18 (Portuguese Single-SIM version)
Please be sure to read (and re-read) carefully, to avoid unnecessary questions.
Rom and Kernel INFO:
ROM: KitKat 4.4.2 [ KOT49I ]
Custom Kernel : 3.4.67 [MTK KitKat Kernel]
About the Rom:
Rom based on the Official Release by Motorola XT919 / XT920
Its now Ported to our Device
Starting from v1.2 , most things are now compiled from modified customizable source-code.
Many fixs where required for making work on our Combo-Chip [MT6620 - Responsible for the Radio / GPS / WiFi / etc]
Includes: Brand New Custom KitKat Kernel 3.4.67
Changelogs :
Changelog v Stable 1.2 (February 15 2015)
This is an huge Update, several things on the rom are now compiled from source...
New Kernel
Updated Camera configs / Lens / Hall to be "in-line" with the new rom camera libs.
Rom
Fix : Camera Hall / image / Lens / Sensors (camera now with 8MPX; interpolated )
Fix : Camcorder
Fix : Improved rom, with several things now being compiled from source for our ZTE (no more dirty hacks)
Fix: Some SE Linux Permissions on AROMA installer
General Rom Clean
APKs zipaligned
NOTE: In order to have the proper camera preview, be sure to "tick" on camera settings the "ZSD" Option
NOTE 2: Due to the major changes on the rom itself, it is strongly recommended, that you don't dirty flash.
--> Be sure to backup your things, and make all wipes, then install this build.
Changelog v Stable 1.1 R2(January 27 2015)
Now compiled with the latest Linaro Toolchain 4.9.3
New compilation Flags and MOD Flags: Neon; Cortex a9; arm v7; Linaro's 4.7+ / 4.9.x Flags; fgcse-las; etc
User Customizable AROMA Installer:
Single/Dual SIM Selection
Baseband Selection (Europe/USA/ JB Baseband **** Europe/USA 2 (Old ICS Modem) **** Venezuela (MoviStar) Baseband+APN's)
Root Selection (Choose to apply Root, or stay un-rooted)
ADD: CPU Governors: Sakuractive (Optimized HotPlug Governor)
ADD: I/O Schedulers: ROW and SIO
REMOVED: Motorola's FLEX Info (merged lingfude's patch)
Minimum Readahead increased to 32Kb (16 > 32)
Maximum Readahead increased to 1024Kb (128 > 1024)
Completely Fair Scheduler (CFS): Responsiveness Tweeks
Dynamic management of dirty page writebacks (Fully controlled via Settings > Performance Control )
Increase Swappiness to 70 (60 > 70)
Disable Gentle Fair Sleepers (Better UI responsiveness)
FIX: Headset Driver (Music/ on-Call Volume Buttons)
FIX: Network Data Meter (Mobile Data and Wifi)
FIX: Green LED when Charging > 90% (merged lingfude's patch)
-WIP- FIX: Camera (Improved Camera colours with the new re-compiled camera .blobs, still - WIP - ); also (merged qus1's camera patch)
Changelog v Stable 1.1 (January 25 2015)
--Removed from downloads due to issues--
Now compiled with the latest Linaro Toolchain 4.9.3
New compilation Flags and MOD Flags: Neon; Cortex a9; arm v7; Linaro's 4.7+ / 4.9.x Flags; fgcse-las; etc
User Customizable AROMA Installer:
Single/Dual SIM Selection
Baseband Selection (Europe/USA/ JB Baseband and Venezuela (MoviStar) ICS Baseband+APN's)
Root Selection (Choose to apply Root, or stay un-rooted)
ADD: CPU Governors: Sakuractive (Optimized HotPlug Governor)
ADD: I/O Schedulers: ROW and SIO
ADD: Multi-User Support (Settings> Users); Check F.A.Q for more Info
REMOVED: Motorola's FLEX Info (merged lingfude's patch)
Minimum Readahead increased to 32Kb (16 > 32)
Maximum Readahead increased to 1024Kb (128 > 1024)
Completely Fair Scheduler (CFS): Responsiveness Tweeks
Dynamic management of dirty page writebacks (Fully controlled via Settings > Performance Control )
Increase Swappiness to 70 (60 > 70)
Disable Gentle Fair Sleepers (Better UI responsiveness)
FIX: Headset Driver (Music/ on-Call Volume Buttons)
FIX: Network Data Meter (Mobile Data and Wifi)
FIX: Green LED when Charging > 90% (merged lingfude's patch)
-WIP- FIX: Camera (Improved Camera colours with the new re-compiled camera .blobs, still - WIP - ); also (merged qus1's camera patch)
Changelog v Stable 1.0 (December 18 2014)
FIX: Bluetooth (thanks qus)
FIX: SIM Management (now working, and available on Settings)
Added: MTK Eng. Mode on Settings
Added: CPU Performance Control on Settings
Added: AOSP Browser (Google replaced AOSP Browser with Chrome since KK Release)
Changelog v Beta 2 (December 11 2014)
AROMA Installer
New Kernel
FIX: Calls under 3G Network (merged patch)
FIX: Camera AF (Auto-Focus)
FIX: "Automatic Time Zone" FC (com.android.phone) error.
FIX: Device Default USB Name (Device name-Mass Storage)
MOD: Modified KK Permissions to allow apps/data to read/write from External SD Card (Google Removed External SD Card acess on KK)
Cleaned: Unused Telephony .blobs
Added: Default KK Music app (was broken, so i didn't added on Beta1)
Added: modified HOSTs (no more adds from apps spaming you...)
Added: CPU Governor : SmartAss V2 (modified for Dual-core ARM)
Added: CPU Governor : PegasusQ (modified for DUAL-Core ARM)
Changelog v Beta 1 (November 29 2014)
First Beta Release
Current Rom and Kernel Status:
Working:
- Telephony (Calls / etc) (2G and 3G)
- Data Connection 2G / 3G
- ART / Dalvik
- FM Radio
- GPS
- Wifi and Wifi Theter
- Bluetooth
- Sensors
- LED's
- Camera / Camcorder
- Pretty much everything is working just fine ...
Needs Improvements:
- You Tell me
GPL Compliance:
Kernel 3.4.67 KK
https://github.com/dragonpt/Kernel_3.4.67_KK_ZTE_v970
I do respect the GPL, but using someone else's work without proper credits is just LACK OF RESPECT.
The inclusion of this kernel in other [future] ROMS is NOT allowed.
--> Instead add a link to this thread as a recommendation on your thread.
The MT6620 Combo-Chip Patchs can of course be used by enyone else trying to work on another device with the same SoC and Combo-Chip,
--> Just show some Humanity and give credits for the work i made ...
I Don't support KANGS!
So please Show some respect, when using my commits and patchs, as well as the commits i added from other Dev's (with proper credits/ git authorization)
Fail to comply and i will drop this project
Credits:
superdragonpt
qus1 , for the initial Help / RAW Original Motorola Rom / Being an nice guy
I would also like to thank:
bgcngm , for the MTK unpack / repack kernel scripts
lingfude , for the original GT818B Driver work, on the old JB Kernel --> Driver backported to this KK build / Auto-time zone fix
Christopher83, for Linaro Toolchains and Dynamic management of dirty page writebacks
amarullz, for the awesome Aroma Installer
Chainfire, for the SuperSU
XDA:DevDB Information
[ROM] [KERNEL] [KITKAT KOT49I ] ZTE V970 / V970M [MT6577], ROM for the Android General
Contributors
superdragonpt
Source Code: https://github.com/dragonpt/Kernel_3.4.67_KK_ZTE_v970
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP / MTK
Version Information
Status: Stable
Current Stable Version: 1.2
Stable Release Date: 2014-12-18
Beta Release Date: 2014-11-29
Created 2014-11-29
Last Updated 2015-03-21
How to Install / Requirements
Requirements:
- New CWM or TWRP Recovery ( In The Downloads Section)
--> I Recommend TWRP
- Extended Internal UserData Partition (due to the new KK fstab, the internal Memory can't be mounted)
(Users with stock Partition Layout, can still flash this rom, however you'll have only 500MB of userdata)
Installation / Flashing Procedure:
- Put the rom on the EXTERNAL SD Card
- FULL Wipes are mandatory (Cache/dalvik/Data)
- Flash the ROM
Since Rom Build Stable 1.1: You have an customizable AROMA Installer:
Choose Single/ Dual SIM
Choose BaseBands Modems
Choose to Root/ Stay un-rooted
Downloads:
Downloads are on XDA DevDB
or
On my Dev-Host
KitKat_ZTE_v970_Stable_1.2.zip - 297.48 MB
On my AndroidFileHost
https://www.androidfilehost.com/?fid=95916177934534755
Have Funn
Kernel Goodies / INFO
Kernel Info:
New Custom Kernel to support KitKat
kernel version: 3.4.67
Governors available:
Hybrid <--Default
ondemand
userspace
powersave
performance
pegasusq (Add on Beta2)
smartassv2 (Add on Beta2)
Sakuractive (Add on Stable 1.1)
I/0 Schedulers available:
cfq <-- Default
noop
deadline
sio (Add on Stable 1.1)
row (Add on Stable 1.1)
TCP Congestion Control:
cubic <-- Default
reno
bic
westwood
highspeed
hybla
htcp
vegas
veno
scalable
Ip
yeah
illinois
Other Kernel Features:
ZRAM <-- Enabled as Default
SDCard Minimum Readahead 32 Kb / Maximum Readahead 1024Kb
Dynamic management of dirty page writebacks
You can check all the Custom Changes on my GitHub Repo
F.A.Q
Q: How can i acess the MTK Engineering Menu?
A: On the dialer : *#*#3646633#*#*
OR --> Settings > MTK Eng. Mode ( added on Stable 1.0)
Q: What Can i do, on the MTK Engineering Menu?
A: The Engineering Menu, should be for Advanced users only, there's several things you can do.
a) Increase The volume speaker volume: >hardware testing>Audio>LoudSpeaker Mode> And set MAX Vol with an max value of 160 (145 as safe)
b) The same options, as in JellyBean MTK Eng Menu.
Q: What are the Partitions Layouts usable on This ROM/KitKat ?
A: BOTH Partitions are usable (Stock and Extended), however on stock Partition Layout, the Internal SDCard (~2GB) can´t be used as is not visible due to the new KitKat fstab (partition table)
Q: I have the Extended Userdata Partition Layout, do i need to flash any disabled Internal SDCard?
A: NO, There's nothing you need to do or flash
Q: Is this ROM Multi-Language ?
A: Yes
Q: How can i change the Kernel Settings (Governors/ etc) ?
A: You can download any app from the PlayStore, i recommend the Trickster MOD
Q: Where are the Developer Options?
A: Go to Settings>About Phone, and tap 7 times on the Build Number
Q: Where can i change the Android Runtime from Dalvik to ART and vice-versa?
A: You can change on the Developer Options
Q:I changed the Android Runtime from Dalvik to ART and app "x" is not working , why?
A: That's rather normal, not every app is compatible with ART.
Q: Is Xposed Framework and his modules compatible with ART?
A: NO, Xposed Framework and his modules (like GravityBox), are not compatible with ART
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay me an beer(s) :fingers-crossed:
Recovery
Is the recovery touch? My power button doesn't work. Thanks in advance
YEAYY!! Finally!! 4.4 for zte v970!!
THANKS BRO!! all the best
Downloading atm... will reply with my feedback
1st thing, Recovery when you put to reboot he go to the main menu of the recovery ALL THE TIME...
2nd i made all the steps and went well but in this ROM i cant get the expandable storage, with the previous roms i always got the expandable storage but with this one dont :\
any help on that?
3rd i made the expandable thing to my mobile, and i found 1 issue! when you made a call you CANT HEAR ANYTHING but the call IS MADE STILL i made a backup before doing the file for expand, i restored and now is fine the sound...
3rd a) i found out that if you put network to 2G the sound can be heard on the speaker when you made a call
StuffiLike said:
Is the recovery touch? My power button doesn't work. Thanks in advance
Click to expand...
Click to collapse
Yes, it is the recovery Touch.
I'm testing this rom, at the moment is going very good and smooth! Will edit later if i find any bugs.
Great work and thanks!
Thank you, good job.
If the file is copied platform.xml to etc/permissions/platform.xml you will be able to install applications to the SD card.
View attachment platform.7z
Hi
I'll be uploading an new recovery ( Twrp ) tomorrow, since cwm can be an buggy sometimes on KK. ( reboot doesn't work sometimes on recovery)
Edit: I can confirm that on calls, on 3G you cant hear the other person (Edit the OP with this info)
On 2G calls works just fine
Regards, have funn
It's very laggy in my ZTE.
Am I the only one?
EDIT: Not laggy now, all is correct. Thank you superdragon!
Juanjose1 said:
It's very laggy in my ZTE.
Am I the only one?
EDIT: Not laggy now, all is correct. Thank you superdragon!
Click to expand...
Click to collapse
No problem haha
It's actually as smoother as JB4.1 or even slightly better.
--> KitKat uses less RAM (any 512MB RAM Phone can run it just fine), you'll see that KK gives you more free Ram, than any JB/ICS Rom.
Regards
EDIT: F.A.Q. and Kernel Features added on OP and following posts...
EDIT 2: New TWRP Recovery added (Its better than CWM ...)
Yes, KK's very stable on my devive(512mb ram). Compared to JB 4.1/4.2, it give more free ram. Don't lags, don't crashes. Amazing!!
Many thanks to superdragonpt you are great!!
yournametv said:
Yes, KK's very stable on my devive(512mb ram). Compared to JB 4.1/4.2, it give more free ram. Don't lags, don't crashes. Amazing!!
Many thanks to superdragonpt you are great!!
Click to expand...
Click to collapse
Hi Yournametv
Yes KitKat runs very good on 512MB, i know, becouse i have another thread, Rom KitKat for micromax a110, and that phone only haves 512MB. and runs smooth
This is still "Beta" , becouse its the first release, but im my opinion, the rom, runs great.
I've been testing this rom for some days, and no big issues.
Please, feel free to share you feedback about the rom, im very Curious to know how's it runs on 512MB.
If you play any heavy game (RAM consuming) please share your feedback here.
Also try to play heavy games, that didn't worked on ICS/JB, KK is more light ...
EDIT: One of the bugs, seems to be fixed: Calls on 3G, i'll post later an patch for you all
Regards
thanks for bringing kitkat to this device
this rom is awesome for 512 ram device, after install full apps it left more 200mb free of ram, that was impossible in JB ,
I could moothly surfing heavy website in chrome, switch moothly to other mutitasking apps, I've never ever done it in lewa or JB. this rom make me love my phone more,
could you make a option to choose which sim to be used in 3nd message/dialer apps please? thanks in advance :victory:
BIg Games
Works fine with ''big games'' :good: . Tested:
- Boom Beach
- Candy Crush Soda Saga
- Clash of Clans
Thank you Superdragon!
EDIT: I'm in ZTE Grand XM (1GB RAM), 512 MB to play xD
calls under 3G Network
Ok , i heavly tested the new patch yesterday, and its now fixed.
Just bare with me, i'll upload the patch, as soon as i find some free time.
Im the time being, you can switch to 2G to make calls.
Regards
No sound during calls
Hi all,
I've just installed this ROM and (as for your previous ROM'S for v970) I want to congratulate (and thank) you on your work, the ROM's are pretty stable and smooth.
However, in this ROM I'm faced with an annoying problem in which when I make/receive calls the other person can hear me but I can't hear anything. I already tested the recording app so it is not certainly an hardware problem. I installed the ROM with TWRP and on the second boot installed superSU as instructed. I got no error messages whatsoever and all the other features seems to work as announced.
I have the v970 version with a single SIM (tmn version). Does anyone has/solved this problem?
Sorry, did not read all the posts previously, forcing the 2G solved it. My bad. Keep up the good work.
Thanks,
Best regards,
André Farinha
Patch 3G calls
Hi
You can now, download the patch for 3G calls
Check download section.
In recovery:
wipe cache and Dalvik
Flash the patch
enjoy
Regards
superdragonpt said:
Hi
You can now, download the patch for 3G calls
Check download section.
In recovery:
wipe cache and Dalvik
Flash the patch
enjoy
Regards
Click to expand...
Click to collapse
Tested patch to 3G, Works fine!
Thank you superdragon to port KitKat for this device; it was forgotten..
I want to congratulate you for great job!.
Droidvpn and troidvpn not working by problem "Tun Socket"
No problem for the moments, ty!
Related
Android 4.4.4 KitKat for Canvas Magnus A117 has finally arrived.
Say thanks to @chrmhoffmann for compiling the first ever CM11 for MT6589.
ORIGINAL THREAD: http://forum.xda-developers.com/showthread.php?t=2676086
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors.
What works:
- SIM1 for phone calls (incoming/outgoing) and SMS, data (2g, 3g)
- SIM2 is a WIP
- Audio (microphone - now also outside phone calls, loudspeaker, headphones)
- Sensors
- Wifi (not wifi direct)
- GPS (no A-GPS yet nor EPO assist files, so the fix can take a bit)
- hw composer
- camera for taking pictures (not video)
- wifi and usb tethering
- battery usage stats (expect the usage for Display to be very unprecise)
- candy crush, facebook and twitter
What doesn't work, known bugs:
- 2nd sim card 3G switch
- camera for "movies" does not work
- (hw) video en/decoding not enabled
- FM radio not available
- A-GPS does not work, GPS works though but slowish
- rest of MTK specifics (what?)
- ... you tell me
DOWNLOAD LINKS:
Refer end of post
Change logs :
Changelog CM11 0.19:
- sync with CM
- enable CWM to install from cmupdater
Changelog CM11 0.18
- sync with CM
- remove MTK audio policy and use default
- increase BT a2dp MTU (does it help?)
Changelog CM11 0.11
- Sync with CM (very close to M8)
- expose all internal storage location for mass storage USB
- USB OTG for external USB location
Custom kernel with lots of governors and schedulers included
Changelog CM11 0.10
- Sync with CM (very close to M8)
- Update blobs from latest Wiko OTA
Changelog CM11 0.9
- Torch (flashlight) enabled
- updated to latest CM (i.e. 4.4.4 as of June 28th)
OLDER VERSIONS :
CM11 V0.11
Patch for weak signal in Sim1/2
GAPPS
V0.8 : http://p.pw/babrbe
INSTRUCTIONS:
Place the zip files in sdcard.
Reboot to recovery
Wipe data/factory reset.
Wipe dalvik Cache.
Install cm11.zip and followed by gapps.
Reboot!
SOME FAQ's
How to enable DualSim: http://forum.xda-developers.com/showpost.php?p=50955391&postcount=2
How to swap memories : http://forum.xda-developers.com/showpost.php?p=52785849&postcount=249
Steps for GPS LOCK http://forum.xda-developers.com/showpost.php?p=53538738&postcount=530
Refer post #4 for more detailed FAQ's
CREDITS:
@chrmhoffmann For bringing the first ever CM11 for an MT6589 device. (THANK HIM IN HIS ORIGINAL THREAD).
OmniROM project @XpLoDWilD @Dr-Shadow @pawitp @dhacker29
@kashifmin for his support and guidance at all times
@Xenon1978 for his support & @Siddhesh for his tireless support at all times.
Thanks to many unknown people whom i don't know but helped me in this project by testing whenever asked since i don't own this device
Sources:
Kernel: https://github.com/sandymanu/A117_MT6589_kernel
Device: https://github.com/chrmhoffmann/android_kernel_wiko_stairway
Android: https://gerrit.omnirom.org/#/q/topic:mt6589,n,z - more to come
Last but not least HIT Thanks if i helped you ! Hitting thanks doesn't cost you but encourages me to work more !
XDA:DevDB Information
[ROM][CM11][Kitkat -4.4.4][PORT][UNOFFICIAL] CyanogenMod 11 For Magnus A117 v0.19, ROM for the Micromax Canvas Magnus A117
Contributors
Santhosh M
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 0.19
Beta Release Date: 2014-06-20
Created 2014-06-22
Last Updated 2014-10-07
Change logs
Change logs :
Custom kernel with various governors and included in v0.11 ROM itself.
New governors added in kernel
Intellidemand
Sakuractive
zzmoove
Pegasusq
Smartassv2
First go to Settings -> About phone and tap Build number 5 times.
Now Governors can be set from Settings-> Performance->Processor-> CPU Governors
Explanation on Governors :
Intellidemand:
Intellidemand aka Intelligent Ondemand from Faux is yet another governor that's based on ondemand. Unlike what some users believe, this governor is not the replacement for OC Daemon (Having different governors for sleep and awake). The original intellidemand behaves differently according to GPU usage. When GPU is really busy (gaming, maps, benchmarking, etc) intellidemand behaves like ondemand. When GPU is 'idling' (or moderately busy), intellidemand limits max frequency to a step depending on frequencies available in your device/kernel for saving battery. This is called browsing mode. We can see some 'traces' of interactive governor here. Frequency scale-up decision is made based on idling time of CPU. Lower idling time (<20%) causes CPU to scale-up from current frequency. Frequency scale-down happens at steps=5% of max frequency. (This parameter is tunable only in conservative, among the popular governors)
To sum up, this is an intelligent ondemand that enters browsing mode to limit max frequency when GPU is idling, and (exits browsing mode) behaves like ondemand when GPU is busy; to deliver performance for gaming and such. Intellidemand does not jump to highest frequency when screen is off.
Sakuractive:
This driver mimics the frequency scaling behavior in "on demand" but with several key differences. First is that frequency transitions use the CPUFreq table directly, instead of incrementing in a percentage of the maximum available frequency. Second "sakuractive" will offline auxillary CPUs when the system is idle, and online those CPUs once the system becomes busy again. This last feature is needed for architectures which transition to low power states when only the "master" CPU is online, or for thermally constrained devices
ZZmoove
ZZmove Governor optimized for low power consumption with the screen off, with particular attention to the limitation of consumption applications in the background with the screen off, such as listening to music. It has three settings: battery saver, balanced and performance. In addition to a performance boost, there is also the governor zzmove optimized.
Pegasusq/Pegasusd
The Pegasus-q / d is a multi-core based on the Ondemand governor and governor with integrated hot-plugging.
Ongoing processes in the queue, we know that multiple processes can run simultaneously on. These processes are active in an array, which is a field called "Run Queue" queue that is ongoing, with their priority values arranged (priority will be used by the task scheduler, which then decides which process to run next).
To ensure that each process has its fair share of resources, each running for a certain period and will eventually stop and then again placed in the queue until it is your turn again. If a program is terminated, so that others can run the program with the highest priority in the current queue is executed.
SmartassV2:
Version 2 of the original smartass governor from Erasmux. Another favorite for many a people. The governor aim for an "ideal frequency", and ramp up more aggressively towards this freq and less aggressive after. It uses different ideal frequencies for screen on and screen off, namely awake_ideal_freq and sleep_ideal_freq. This governor scales down CPU very fast (to hit sleep_ideal_freq soon) while screen is off and scales up rapidly to awake_ideal_freq (500 mhz for GS2 by default) when screen is on. There's no upper limit for frequency while screen is off (unlike Smartass). So the entire frequency range is available for the governor to use during screen-on and screen-off state. The motto of this governor is a balance between performance and battery.
Reserved
FAQsNOTE: For every problem try a restart first.....
Q1. Titanium Backup not showing my backups?
Ans. Go to titanium backup settings then choose your backup folder location. As sdcards are swapped in the rom. Sdcard0 is your internal sdcard and Sdcard1 is your external sdcard.
Q2 Can't connect usb storage to pc?
Ans. Go to settings->storage and select usb connection from menu.
Q3 Can't see contacts from second sim?
Ans. Just use the rom normally for a day or two with some restarts.... It worked for me. The contacts should be visible then after clicking all contacts.
Q4 Cant take screenshots or storage problems.
Ans. You probably have flashed ebr partitions to increase internal memory..... Flash stock rom first through sp flash tools then again flash the cm11 rom.
Q5 How to enable usb debugging?
Ans. Go to about phone then repeatedly click on buil number.
Q6 How to enable ART (Android Run Time) and what are benefits?
Ans. Go to Developer options and choose ART from "select runtime"
By using ART less resources are used and apps are loaded faster.
Q7 How to disable vibrate on touch?
Ans. Go to settings->sound and disable vibrate on touch.
Q8 High memory usage by apps although no big apps installed?
Ans. ART uses more memory than dalvik. Switch to dalvik runtime if you have less free memory.
NOTE: Dont try video recording. Otherwise your device will be freezed and will have to restart. Also don't flash ebr partitions to increase internal memory and don't try any tweaks or anything because it's CM
Smooth and buttery ROM.
Santhosh M said:
Change logs & future updates
Click to expand...
Click to collapse
@Santhosh M finally we get CM11 Kitkat rom and i love CM roms and you just fullfill my wish. Great work bro and head off to u and your team.......
.......
Grt work-
Thanks @Santhosh M
Below will fix titanium backup restore issue
Swap memories : Download and Flash
http://click.xda-developers.com/api/click?format=go&jsonp=vglnk_jsonp_14005584411147&key=f0a7f91912ae2b52e0700f73990eb321&libId=93da679e-02ef-446a-9fed-46b2384d9da9&loc=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D2584862&v=1&out=https%3A%2F%2Fdrive.google.com%2Fuc%3Fexport%3Ddownload%26id%3D0Bwikdmq9Dw6nQUZCaGZfTDE4ZDg&ref=http%3A%2F%2Fwww.google.co.in%2Furl%3Fsa%3Dt%26source%3Dweb%26cd%3D1%26ved%3D0CCgQrAIwAA%26url%3Dhttp%253A%252F%252Fforum.xda-developers.com%252Fshowthread.php%253Ft%253D2584862%26rct%3Dj%26q%3Dsd%2520swap%2520cm%252011%26ei%3DN9N6U4yZApONuATjgIGYCw%26usg%3DAFQjCNG3i9Jd1FRZDA4dDUkIM0kOkMmQsQ%26sig2%3Dlxxj26dk2xo4HIEjP4WR3g%26bvm%3Dbv.67229260%2Cd.c2E&title=%5BSWAP%5D%20(RISKY)%20Memory%20swap%20for%20CM11%20by%20Maclaw%20build%2020131225%20-%20xda-developers&txt=Flashable%20zip%20on%20Gdrive
Credits WalkerBales
HIT thanks!!
Awesome..
Sent from my C2305 using XDA Free mobile app
Again a brilliant work from a brilliant guy...
Keep it up Bro...
will update detailed review after downloading working release
Thanks to many unknown people whom i don't know but helped me in this project by testing whenever asked since i don't own this device
Click to expand...
Click to collapse
I think you know my name its Rohit, not so hard to remember
Google ok is not work I try with google now lanucher also
Sent from my Micromax A117 using XDA Premium 4 mobile app
Attention
Silent downloaders you ppl should be ashamed of yourself. This rom is result of two months of continuous hard work even when the dev @Santhosh M don't have the device. At least try to appreciate someones hard work. One sing comment, just one single comment you ppl are not able type. SHAME ON YOU Magnus Users :crying:
---------- Post added 23rd June 2014 at 12:02 AM ---------- Previous post was 22nd June 2014 at 11:56 PM ----------
@yaman22feb @Geek-DROID @TECHVS @Bluehacks @aravindanxda @Rht555
Thank you so much friends for your feedback. Keep supporting us.
Ultimate. Great work by great developer .
Sent from my Micromax A117 using XDA Premium 4 mobile app
Santhosh M said:
Android 4.4.3 KitKat for Canvas Magnus A117 has finally arrived.
Say thanks to @chrmhoffmann for compiling the first ever CM11 for MT6589.
ORIGINAL THREAD: http://forum.xda-developers.com/showthread.php?t=2676086
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors.
What works:
- SIM1 for phone calls (incoming/outgoing) and SMS, data (2g, 3g)
- SIM2 is a WIP
- Audio (microphone - now also outside phone calls, loudspeaker, headphones)
- Sensors
- Wifi (not wifi direct)
- GPS (no A-GPS yet nor EPO assist files, so the fix can take a bit)
- hw composer
- camera for taking pictures (not video)
- wifi and usb tethering
- battery usage stats (expect the usage for Display to be very unprecise)
- candy crush, facebook and twitter
What doesn't work, known bugs:
- 2nd sim card 3G switch
- Dual SIM is a WIP, not has some bugs (data connection instability, etc.)
- camera for "movies" does not work
- (hw) video en/decoding not enabled
- bluetooth not available
- FM radio not available
- A-GPS does not work, GPS works though but slowish
- rest of MTK specifics (what?)
- ... you tell me
DOWNLOAD LINKS:
V0.8 : http://www.androidfilehost.com/?fid=23501681358550881
GAPPS : http://d-h.st/JTM
INSTRUCTIONS:
Place the zip files in sdcard.
Reboot to recovery
Wipe data/factory reset.
Wipe dalvik Cache.
Install cm11.zip and followed by gapps.
Reboot!
SOME FAQ's
How to enable/disable DualSim: http://forum.xda-developers.com/showpost.php?p=50955391&postcount=2
How to swap memories : http://forum.xda-developers.com/showpost.php?p=52785849&postcount=249
Steps for GPS LOCK http://forum.xda-developers.com/showpost.php?p=53538738&postcount=530
CREDITS:
@chrmhoffmann For bringing the first ever CM11 for an MT6589 device. (THANK HIM IN HIS ORIGINAL THREAD).
OmniROM project
@Xplodwild
@Dr-Shadow
@pawitp
@dhacker29
@kashifmin for his support and guidance at all times
@Xenon1978 for his support & @Siddhesh for his tireless support at all times.
Thanks to many unknown people whom i don't know but helped me in this project by testing whenever asked since i don't own this device
Sources:
Kernel: https://github.com/sandymanu/CM11_A117_kernel
Device: https://github.com/chrmhoffmann/android_kernel_wiko_stairway
Android: https://gerrit.omnirom.org/#/q/topic:mt6589,n,z - more to come
Last but not least HIT Thanks if i helped you ! Hitting thanks doesn't cost you but encourages me to work more !
XDA:DevDB Information
[ROM][CM11][Kitkat -4.4.3][PORT][UNOFFICIAL] CyanogenMod 11 For Canvas Magnus A117, ROM for the Micromax Canvas Magnus A117
Contributors
Santhosh M
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 0.8
Beta Release Date: 2014-06-22
Created 2014-06-22
Last Updated 2014-06-22
Click to expand...
Click to collapse
Sent from my Micromax A117 using Tapatalk
Silent downloaders you ppl should be ashamed of yourself. This rom is result of two months of continuous hard work even when the dev @Santhosh M don't have the device. At least try to appreciate someones hard work. One sing comment, just one single comment you ppl are not able type. SHAME ON YOU Magnus Users :crying: [/SIZE]
---------- Post added 23rd June 2014 at 12:02 AM ---------- Previous post was 22nd June 2014 at 11:56 PM ----------
@yaman22feb @Geek-DROID @TECHVS @Bluehacks @aravindanxda @Rht555
Thank you so much friends for your feedback. Keep supporting us. [/QUOTE
@Siddhesh.K15 yes you are right many people just downloaded roms and never give there feedback. They don't know how Devs worked hard for making awesome rom. These more difficult to port cm rom which is kitkat rom this more amazing. So these required hard work for making unbelievable rom. So i have request to user just appreciate works of devs and teams who just fullfill your wishesh. Devs required your appreciation for do more awesome job in future. So just appreciate them and thank to them and there team........:good:
Click to expand...
Click to collapse
owsm work
buddie..
Great work DEV
I am big fan of CM roms. I have used CM7 before in my old android device and its always smooth & stable.
Great to see CM11 for our device but will wait for improved version of this rom with less bugs.
Great work DEV....you are saviour!!!!
:good:
Excellent work Santosh
This is a good beginning for magnus and its users for kitkat. This will surely help other develpers to port more CM based firmwares. Once again I appreciate your hardwork to serve people and time you spent on this port. Hope other developers will fix the hiccups and make it stable. :good:
Thanks Bro ....
waiting for this...
hope upcoming builds will stable meanwhile please try to PORT PAC,carbon roms by taking help from Kashifmin bro
srinath2912 said:
Thanks Bro ....
waiting for this...
hope upcoming builds will stable meanwhile please try to PORT PAC,carbon roms by taking help from Kashifmin bro
Click to expand...
Click to collapse
I can get those two in a week for you. But those two are completely unstable ( No network too ) and can't be used. U can just install it and feel the experience for a while. So its under hold.
rom is super smooth, waiting for the devs to fix everything and make it stable
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
WELCOME to KitKat
The builds are made by qus1 and superdragonpt, take into consideration neither one of us own this device.
GPL kernel(s) on both different branch's can be checked on our github pages
See more on "GPL Compliance" down.
Hello Guys !
In this thread you will find my Rom and Kernel for the Micromax a110 / MyPhone/ Wiko CINK KING/ QMobile a10
Please be sure to read (and re-read) this carefully, to avoid unnecessary questions.
Rom and Kernel INFO:
ROM: KitKat 4.4.2 [ KOT49I ]
Custom Kernel : 3.4.67 [MTK KitKat Kernel]
About the Rom:
Rom based on the Official Release by Motorola XT919 / XT920
( since February 2015) part of the ROM is made from our customized custom source code .)
Includes: Brand New Custom KitKat Kernel 3.4.67.
Changelogs :
Changelog v Stable 1.1 (Feb 14 2015)
User Customizable AROMA Installer:
Single/Dual SIM Selection
Baseband Selection (India / Pakistan / Europe Basebands)
Root Selection (Choose to apply Root, or stay un-rooted)
New Kernel:
Now compiled with the latest Linaro Toolchain 4.9.3
New compilation Flags and MOD Flags: Neon; Cortex a9; arm v7; Linaro's 4.7+ / 4.9.x Flags; fgcse-las; etc
New Modified ALSPS (Prox-Sensors) Drivers, in order to AUTO-Detect the sensor in-use on your Hardware Revision
Camera: Now using the proper camera sensor(8825), no more hacks using the (8835) stock Moto's Camera...
Camera: Now using proper Camera HALL/ and kernel camera's configs
Camera: New ov8825 LENS (using the native one, should increased the AF / reduced camera noise)
OTG: Enable Initial OTG Configs
ADD: CPU Governors: Sakuractive (Optimized HotPlug Governor)
ADD: I/O Schedulers: ROW and SIO
Minimum Readahead increased to 32Kb (16 > 32)
Maximum Readahead increased to 1024Kb (128 > 1024)
Completely Fair Scheduler (CFS): Responsiveness Tweeks
Dynamic management of dirty page writebacks (Fully controlled via Settings > Performance Control )
Increase Swappiness to 70 (60 > 70)
Disable Gentle Fair Sleepers (Better UI responsiveness)
ROM:
Add proper OTG permissions
Add new Camera . libs compiled from source (these are not the same as the ones compiled by qus)
ADD other misc libs compiled by source
FIX: Green LED when Charging > 90% (merged lingfude's patch)
REMOVED: Motorola's FLEX Info (merged lingfude's patch)
The Default AROMA install is for: India Baseband / Kernel JB Camera HW Revision / Dual-SIM
ICS CAMERA HW Users: Flash the Alternative Kernel
KitKat_MMX_a110_Stable_1.1.zip - 313.83 MB
Kernel_mmx_a110_Stable_1.1_ICS.zip - 4.00 MB
ChangeLog Beta4 ( qus1 build) Feb. 10 2015
New kernel
Fix camera Auto-Focus / Fix camera with new compiled .libs from source ( by qus1)
Fix sim-managment ( merged superdragonpt patch)
Fix green led when charging >90% ( merged lingfude patch)
Includes all kernel patch's from superdragonpt's github branch-master until Feb 09 2015 ( check superdragonpt github commit history)
full re-build project
Download:
beta4-2
for beta4, old version. / Kernel patch's for others hardware revisions
patch-beta4 for alsps 36283, touch 5316
patch-beta4 for alsps 3607, touch ft5316_5p
beta4-2 default kernel: for alsps 3607, touch ft5316_5p.
If you have another hardware, just install the proper kernel patch for beta4
Changelog v Stable 1.0 (December 26 2014)
New Kernel
FIX: GPIO/Headset/Volume Buttons, Kernel Drivers
FIX: ALSPS (Prox. Sensor) - Auto-Detection of diff ALSPS, This will also avoid the compilation of an 3rd HW Kernel Revision
FIX: SIM Management (now working, and available on Settings)
FIX: GPS (Improved, auto-detection of the right Combo-Chip)
Added: MTK Eng. Mode on Settings
Added: CPU Performance Control on Settings
Added: AOSP Browser (Google replaced AOSP Browser with Chrome since KK Release)
General Rom Clean
Changelog v Beta 2 (December 14 2014)
AROMA Installer
New Kernel
FIX: Network Modem/Baseband (merged patch)
FIX: ON Screen Buttons
FIX: Device Default USB Name (Device name-Mass Storage)
MOD: Modified KK Permissions to allow apps/data to read/write from External SD Card (Google Removed External SD Card acess on KK)
Cleaned: Unused Telephony .blobs
Added: Default KK Music app (was broken, so i didn't added on Beta1)
Added: modified HOSTs (no more adds from apps spaming you...)
Added: CPU Governor : SmartAss V2 (modified for Dual-core ARM)
Added: CPU Governor : PegasusQ (modified for DUAL-Core ARM)
General Clean on the rom...
Changelog v Beta 1 (November 18 2014)
First Beta Release by qus1
Current Rom and Kernel Status:
Working:
- Telephony (Calls / etc) (2G and 3G)
- Data Connection 2G / 3G
- ART / Dalvik
- FM Radio
- Bluetooth
- GPS
- Wifi and Wifi Theter
- Sensors
- LED's
- Pretty much everything is working just fine ...
Not Working:
- You tell me ...
GPL Compliance:
Kernel 3.4.67 KK
superdragonpt Github Repo - Branch Master
qus1 Github Repo- Branch Master
I do respect the GPL, but using someone else's work without proper credits is just LACK OF RESPECT.
The inclusion of this kernel in other [future] ROMS is NOT allowed.
--> Instead add a link to this thread as a recommendation on your thread.
I Don't support KANGS!
So please Show some respect, when using qus1 and my commits and patchs, as well as the commits i added from other Dev's (with proper credits/ git authorization)
Fail to comply and i will drop this project
Rules
- Don't ask for ETA (that's rude), i do work for an living, and this things are very time consuming.
- Search in the thread, before asking something, Keep of the spamm
- Be Polite
- Don't ask me to "port" the rom and Kernel to Phone "x", im already maintaining this rom and kernel (and i don't own this device)
Credits:
qus1 , for the initial BETA1 / Beta1 Kernel tree / Being an nice guy
superdragonpt
I would also like to thank:
bgcngm , for the MTK unpack / repack kernel scripts
XDA:DevDB Information
[ROM] [KERNEL] [KITKAT 4.4.2 - KOT49I ] MMX a110 [MT6577] , ROM for the Micromax A110
Contributors
superdragonpt, qus1
Source Code: https://github.com/dragonpt/Kernel_3.4.67_KK_MMX_a110
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: KK Recovery
Based On: AOSP / MTK
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-12-26
Current Beta Version: 2.0
Beta Release Date: 2014-12-14
Created 2014-12-14
Last Updated 2015-02-14
How to Install / Requirements
Requirements:
- New CWM or TWRP Recovery
--> I Recommend This One
- Extended Internal UserData Partition (due to the new KK fstab, the internal Memory can't be mounted)
(Users with stock Partition Layout, can still flash this rom, however the internal SDCard can't be used
Installation / Flashing Procedure:
- Put the rom on the EXTERNAL SD Card
- FULL Wipes are mandatory (Cache/dalvik/Data/System)
- Flash the ROM
-If you wish, reboot to the recovery first, and flash the SuperSU.zip in order to ROOT the Device (ROM isn't rooted as default), After flashing the supersu.zip, reboot the Phone, Say "NO" IF the Recovery Promp about Root not instaled/damaged
[*]--> You can find the latest SuperSU Root .zip HERE
Kernel Goodies / F.A.Q / Misc INFO
Kernel Info:
New Custom Kernel to support KitKat
kernel version: 3.4.67
Governors available:
Hybrid <--Default
ondemand
userspace
powersave
performance
pegasusq (Add on Beta2)
smartassv2 (Add on Beta2)
I/0 Schedulers available:
cfq <-- Default
noop
deadline
TCP Congestion Control:
cubic <-- Default
reno
bic
westwood
highspeed
hybla
htcp
vegas
veno
scalable
Ip
yeah
illinois
Other Kernel Features:
ZRAM <-- Enabled as Default
SDCard Read Ahead 128KB
F.A.Q.
Q: How can i acess the MTK Engineering Menu?
A: On the dialer : *#*#3646633#*#*
Q: What Can i do, on the MTK Engineering Menu?
A: The Engineering Menu, should be for Advanced users only, there's several things you can do.
a) Increase The volume speaker volume: >hardware testing>Audio>LoudSpeaker Mode> And set MAX Vol with an max value of 160 (145 as safe)
b) The same options, as in JellyBean MTK Eng Menu.
Q: What are the Partitions Layouts usable on This ROM/KitKat ?
A: BOTH Partitions are usable (Stock and Extended), however on stock Partition Layout, the Internal SDCard can´t be used as is not visible due to the new KitKat fstab (partition table)
--> It is possible to swap internal and external storages, apply the patch by :Akhilendra Gadde HERE
Q: Is this ROM Multi-Language ?
A: Yes
Q: How can i change the Kernel Settings (Governors/ etc) ?
A: You can download any app from the PlayStore, i recommend the Trickster MOD
Q: Where are the Developer Options?
A: Go to Settings>About Phone, and tap 7 times on the Build Number
Q: Where can i change the Android Runtime from Dalvik to ART and vice-versa?
A: You can change on the Developer Options
Q:I changed the Android Runtime from Dalvik to ART and app "x" is not working , why?
A: That's rather normal, not every app is compatible with ART.
Q: Is Xposed Framework and his modules compatible with ART?
A: NO, Xposed Framework and his modules (like GravityBox), are not compatible with ART
Q:Where are the Downloads?
A: Downloads are on the XDA DevDB Downloads TAB HERE
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay qus1 and me an beer(s)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PATCHS / Downloads:
Downloads are on the XDA DevDB Downloads TAB HERE
Mirror on my Dev-Host:
KitKat_MMX_a110_Stable_1.0.zip - 285.07 MB
The Kernel included in the Rom, is for JB (out-of-the-box) Revision
For ICS Revision (diff Camera sensors / HAL) Flash this kernel:
Kernel_mmx_a110_Stable_1.0_ICS.zip - 4.00 MB
Beta2 Downloads:
Mirror On my Dev-Host:
KitKat_a110_BETA2.zip - 296.02 MB
The Kernel included in the Rom, is for JB (out-of-the-box) Revision
For ICS Revision (diff Camera sensors / HAL) Flash this kernel:
Kernel_mmx_a110_BETA2_ICS.zip - 4.01 MB
For C2 Revision (diff ALPS- Proximity Sensor) Flash this kernel:
Kernel_mmx_a110_BETA2_C2.zip - 4.01 MB
Good work sir. Keep 'em coming.
Beta 2 link plzzz
Sir I Can't find the beta 2 ROM AND KERNEL link
help plzzz ,
BTW thanks to qus1 and snapdragonpt for the beta2
---------- Post added at 04:45 AM ---------- Previous post was at 04:41 AM ----------
mdezazrock said:
Sir I Can't find the beta 2 ROM AND KERNEL link
help plzzz ,
BTW thanks to qus1 and snapdragonpt for the beta2
Click to expand...
Click to collapse
sorry for the spell mistake ---// its superdragonpt
XDA DevDB server is having server issues.
For now, im uploading to my Dev-Host ...
For the time being, check F.A.Q / Info
Regards
EDIT:
Downloads are up, on my Dev-Host
Will add them on XDA devDB server, when the server is OK (buggy now...),
it's now 04.30 am here... so i'll try to upload later into the xda server ...
EDIT2:
Of course, since i don't own this device, i can't be 100% sure if the fixs where Successfully implemented
Your Feedback is Important
superdragonpt said:
XDA DevDB server is having server issues.
For now, im uploading to my Dev-Host ...
For the time being, check F.A.Q / Info
Regards
Click to expand...
Click to collapse
Thankyou for your work sir.. my a110 is ICS out of the box.
But "C2 Revision (diff ALPS)" means is it JB out of the box? or something else?
for C2 what ALSPS is use for the proximity? is it still the same? cm307? hope transparent status bar work on this one :fingers-crossed:
thanks! (Y)
@superdragonpt
Nice wrok bro.
I am right now enjoying the beta 1 and I just have 2 queries,
1. Is sim management section in settings available in the beta 2 version?
2. how do i change the 3g setting (that is setting sim 2 to have 3g and changing it back to sim1) in beta1 and beta2?
Thank u , sir
Thank u for making my C2 alive agin.... Downloading the ROM
Also i hope the Whatsapp notification prblm fixed..
Awesome KitKat ROM ....
Cons:
Signal for sim 1 is always too low...
Sim management option missing..
Internal memory card bug
GPS not locking..quickly taking a lot of time
Pros:
Are in abundance ...
First its KitKat...so after waiting for so long ....finally. Breathe of relief...
Xpose is working...
Still testing ...
In the evening will give a detailed review
Sent from my a110 using XDA Free mobile app
to add up from the post above there is still no way to make transparency on status bar
What do you mean by internal sd bug that internal sd not mounting.
review
today you made my day brother
have proud on 2 things :
1. to have MMX a110
AND
2. developer like you
thank for making this rom. i like it very much
i am testing it give you review very soon
1 issue i found is Signal for sim 1 is always too low...
Yup
Sent from my a110 using XDA Free mobile app
sync contact
hello.
i got some problem.
my google contact didn't sync with the phone.
other than that, nothing i guess.
will update later if got more problem.
cheers!
Mine is ICS out of box.
Working:
- USb Teathering working
- Hot spot working
- GPS ( Fixed in google map in 3 seconds), wifi, Bluetooth, camera working.
- Internal and external SD card both are mounting
- Almost every functionality is working
Not working:
- Still status bar is not transparent.
- Sim management is missing for 2nd sim
...........................................................**************************....................................................................
Thanks Dev for this Kitkat Rom
@superdragonpt sir , I feel there is a touch lag issue in my device , I have flashed the required patches and everything
Only thing I'm facing is a touch response and scrolling issue
Please help
Thanx man
For Sunday gift .
Will give review soon
man i think status bar problem is due to launcher.There is a Xposed module for transperency.
Links:
http://repo.xposed.info/module/com.woalk.apps.xposed.translucentstyle
http://repo.xposed.info/module/com.woalk.apps.xposed.ttsb
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Open Sourcing Mediatek - Wiko DarkMoon ; SoC MT6582
MediaTek Development
Being owner of an Mediatek device, means (most of the times) not having the sourcecode published by the Official vendor.
Wiko Never published an proper JB 3.4.5 Kernel Source Code (they only gave us incompleted, and unbuildable sources).
Plus, they never updated this phone (to KK) as promised ...
--> Well ... This is XDA after all .....
WELCOME to KitKat
It should also work without any issues on the clones:
- Micromax a200 Canvas turbo Mini (India, others) --> Confirmed working
- BLU Life Play S ( South / North America) ---> Confirmed working
- Myphone Agua Iceberg Slim ( Philippines , others) --> Confirmed Working
- QMobile Noir A910 ( Pakistan, others ) --> Confirmed working
--> If you guys have any issues on this clones, let me know
--> Should be only a matter of changing the modem
Hello Guys !
In this thread you will find my KitKat Rom and Kernel for the Wiko DarkMoon (Mediatek MT6582 SoC), and clones.
Please be sure to read (and re-read) carefully, to avoid unnecessary questions.
This is an Unofficial Build, so it will NOT be supported by the OEM.
Rom and Kernel INFO:
This is the work of +9 Months of R&D ...
ROM: KitKat 4.4.2 [ KOT49H ]
Custom Kernel : 3.4.67 [KitKat compatible Kernel]
Changelogs :
Changelog v Stable 1.1 (March 30 2015)
- FIX: Volume Down Button (merged previous patch, into current kernel compilation)
- FIX : Several SELinux Issues
- FIX: Front Camera, now working and with 8MPX Max Resolution (Stock Camera is 5MPX)
- Improved: GPS Driver (rewrite the driver)
- Improved: Patch 3 minor Kernel Wakelocks
- Improved: Fuel_Gauge VTABLE: Battery Configs
- Improved: Power Driver (rewrite the driver)
- Add/Improved: CPU Governors: SAKURACTIVE; NIGHTMARE; INTERACTIVEX; ZZMOOVE; LULZACTIVEQ; SMARTASS2; CONSERVATIVE; PEGASUSQ;
- Rom is now Pre-rooted, and BusyBox enabled
Changelog v Stable 1.0 (March 17 2015)
First Open Public Release
Changelog v Public Betas 1 and 2 (March 14 / 15 2015)
Internal Builds
Current Rom and Kernel Status:
Working:
- Telephony (Calls / etc) (2G and 3G)
- Data Connection 2G / 3G
- ART & Dalvik
- USB OTG
- FM Radio
- GPS
- Wifi and Wifi Theter
- Bluetooth and BT Theter
- Sensors
- LED's
- Camera Rear / Camcorder
- Front Camera
Not Working:
- Everything is working just fine
- You tell me
NOTE:
Some units use an extra image sensor on the main (rear) camera
In this units, when taking pictures, sometimes the picture can become "bluish "
Solution: go to: White Balance> and select " Fluorescent".
GPL Compliance:
Kernel Wiko DarkMoon 3.4.67 KK
Github Repo - Branch Master
I do respect the GPL, but using someone else's work without proper credits is just LACK OF RESPECT.
The inclusion of this kernel in other [future] ROMS is NOT allowed.
--> Instead add a link to this thread as a recommendation on your thread.
--> Just show some Humanity and give credits for the work i made ...
I Don't support KANGS!
Fail to comply and i will drop this project
Credits:
superdragonpt
XDA:DevDB Information
[Rom] [Kernel] [Unofficial] KitKat for Wiko DarkMoon [MT6582], ROM for the Android General
Contributors
superdragonpt
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock Rom Modified
Based On: MTK KitKat / AOSP
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2015-03-17
Beta Release Date: 2015-03-14
Created 2015-03-17
Last Updated 2015-04-01
Requirements / How to Install / Downloads
Requirements:
- Make an FULL Backup of your Phone, Everything will be WIPED
- Please Backup your IMEIs via MTKDroidTools and via CarlivTouchRecovery (CTR) <-- Just in case ...
- Download the Modified Stock WIKO JellyBean Rom , this step is mandatory, since you really need to be on stock Base, and without (your) personal modifications.
- Plus it really needs an fresh instalation ...
This modified Stock Wiko Rom, includes Custom Recovery and modified Partitions (needed by KK )
This is done via SPFlashTools (included), and make sure you have the MTK65xx USB drivers installed.
After successfully flashing the Modified Stock Rom, let it boot up (first boot),
Now, put the KitKatRom.zip on your EXTERNAL SD Card.
Turn Off the phone, and boot to the recovery.
Installation / Flashing Procedure:
Wipe Data / Factory Reset
Wipe Dalvik Cache
Mounts and Storage > Format /System
Reboot to Recovery
Flash The ROM.zip
--> Reboot
Downloads:
Modified Stock WIKO JellyBean Rom
https://www.androidfilehost.com/?fid=95916177934542864
Unofficial KitKat Stable v1.1
https://www.androidfilehost.com/?fid=95916177934548180
Old Builds:
Unofficial KitKat Stable v1.0
https://www.androidfilehost.com/?fid=95916177934542863
Kernel Goodies / INFO
Custom kernel version: 3.4.67
Governors available:
HotPlug <-- Default
ondemand
userspace
powersave
performance
sakuractive (Added on v1.1)
nightmare (Added on v1.1)
interactivex (Added on v1.1)
zzmoove (Added on v1.1)
lulzactiveq (Added on v1.1)
smartassV2 (Added on v1.1)
conservative (Added on v1.1)
pegasusq (Added on v1.1)
I/0 Schedulers available:
cfq <-- Default
noop
deadline
row
TCP Congestion Control:
cubic <-- Default
reno
bic
westwood
highspeed
hybla
htcp
vegas
veno
scalable
Ip
yeah
illinois
F.A.Q.
Q: Is this Rom rooted?
A: No, but you can flash the SuperSU.zip on recovery
-> You can find the latest SuperSU Root .zip HERE
-> And don't forget to say Thanks to Chainfire...
A: Yes (Since v1.1)
Q: Is this ROM Multi-Language ?
A: Yes
Q: How can i change the Kernel Settings (Governors/ etc) ?
A: You can download any app from the PlayStore, i recommend the Trickster MOD
Q: Where are the Developer Options?
A: Go to Settings>About Phone, and tap 7 times on the Build Number
Q: Where can i change the Android Runtime from Dalvik to ART and vice-versa?
A: You can change on the Developer Options
Q:I changed the Android Runtime from Dalvik to ART and app "x" is not working , why?
A: That's rather normal, not every app is compatible with ART.
Q: Is Xposed Framework and his modules compatible with ART?
A: NO, Xposed Framework and his modules (like GravityBox), are not compatible with ART
(Xposed for ART is still an W.I.P.)
Q: ART is not working, it always boot into Dalvik, why?
A: Unistall Xposed Framework, it is not compatible with ART, so it'll always force to boot into Dalvik.
Q: Can i revert to stock ROM after ?
A: Sure you can! You just need to flash the Stock Wiko JellyBean 4.2 ROM via SPFlashtools. Or just download the wiko software tool from their site.
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay me an beer(s)
Under construction...
Thanks a lot for you hard work
Patch Volume DOWN Button
Hi
Here's an new kernel:
Fixed the issue with the Volume Down Button.
--> Among other things, you can now take screenshots...
EDIT: Removed.... Merged on Stable v1.1
No wipes required, just flash this on recovery
Also added ROM Screenshots
Regards
Thanks...
Awesome work :good:
You are brilliant
Thank you for your hard work. Everything is working very smooth :good:
Oh my god! I love you! Thanks for this!
OMG Thank you for your work.
A little donation was sent :highfive:
I will test it and give you feedback.
Frontcam is useless for me.
A small bug
When we change network mode in settings->mobilenetwork->change to 2g/3g
Then com.android.phone has stopped...
sivakarthick said:
Awesome work :good:
Click to expand...
Click to collapse
muffinmann said:
Thank you for your hard work. Everything is working very smooth :good:
Click to expand...
Click to collapse
DarthLuda said:
Oh my god! I love you! Thanks for this!
Click to expand...
Click to collapse
T-1311 said:
OMG Thank you for your work.
A little donation was sent :highfive:
I will test it and give you feedback.
Frontcam is useless for me.
Click to expand...
Click to collapse
Thanks Guys.
sivakarthick said:
When we change network mode in settings->mobilenetwork->change to 2g/3g
Then com.android.phone has stopped...
Click to expand...
Click to collapse
Hi there
Everything is fine for me (and for my testers).
I actually know, where that is coming from ... i'll assume you don't own the wiko DarkMoon, but one of his clones?
Thats related with the modem / region... nothing to worry about, thats why i wrote that little note about the modem thing in the OP
Just go to settings>Date & Time and "Untick" the Automatic Time Zone
Them tell me how that works for you ...
Xeers
The location does not work. It's just me?
Edit: after a factory reset it works
Thanks...
superdragonpt said:
Thanks Guys.
Hi there
Everything is fine for me (and for my testers).
I actually know, where that is coming from ... i'll assume you don't own the wiko DarkMoon, but one of his clones?
Thats related with the modem / region... nothing to worry about, thats why i wrote that little note about the modem thing in the OP
Just go to settings>Date & Time and "Untick" the Automatic Time Zone
Them tell me how that works for you ...
Xeers
Click to expand...
Click to collapse
Thank you @superdragonpt
You are correct.. Im using Micromax a200 Canvas turbo Mini.
After unticking automatic time zone,the same problem occurs..
When this error occurs the network is suddenly stopped and scanning once again..
sivakarthick said:
Thank you @superdragonpt
You are correct.. Im using Micromax a200 Canvas turbo Mini.
After unticking automatic time zone,the same problem occurs..
When this error occurs the network is suddenly stopped and scanning once again..
Click to expand...
Click to collapse
Hi
Yes thats related with the region modem.img, nothing to worry about, it's expected.
But it just pops the error, everything comes back to normal after, yes?
regards
superdragonpt said:
Hi
Yes thats related with the region modem.img, nothing to worry about, it's expected.
But it just pops the error, everything comes back to normal after, yes?
regards
Click to expand...
Click to collapse
Yes... You are correct.. It doesnot affect the usability of the phone...
Whether It can be cleared? Whether I need to upload any file from my mobile?
Very Nice, Good work :good:
Hello, devs! I'm not good in English at all, but I'm sure you would understand. I'm owner of such an awesome device as Fly iq4413. It's powered by mt6585m (don't exactly know if it is same chipset as non-m 6582) and it is with 4.4.2 OS stock firmware. There are some parts of available sources for it, so it can be helpful. If any of devs will be interested, let me know. By the way, other specs are 1.3ghz clock, GSM-wcdma baseband, 1gb ram, 4gb overall rom, dual sim, 8mpix rear cam, 2mpix frontal, no m-sensor and no gyroscope (accelerometer presents). Also, in Russian development forum there are a lot of firmwares ported : aosp 4.4.4, flame os (not flyme), miui v5 and miui v6 beta, lewa os and some others.
Upd: as I knew , my device has LOWER screen resolution, so obviously some resources will not be the same
How is speed and battery? Is it ok? Better than original?
Htc Desire 310 have the same specs. Do you recommend for it ?
I'm not responsible for whatever damage this could possibly cause to your device.
If you appreciate the work i have done, and want me to continue working on this projet, Feel free to buy me a cup of coffee @paypal
Introducing QDroid - ONEUI 2.1 For Galaxy A8/A8+ 2018 ONLY FOR A530F/A530W/A730F
Some information you should know..
This is a full A7 2018 port with Android Version 10
This ROM is made with heavy collaboration from @corsicanu and @ananjaser1211 make sure to give them coffee.
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
Any sort of File Kanging will be reported without hesitation.
Release Note :-
After a battle that took months on end, im able to deliver you this project in a state were i can deem it as "Daily Driver", This was no easy task, Android Q has changed alot and a skin such as oneui 2.0 was never intended to run on this device, But here we are.
As the nature of "Initial releases" tend to be, expect Bugs, i wrote down the ones i can see and that are actual issues that can affect people. so make sure to read them.
The F.A.Q and Notes page is more important than this entire post. it details stuff that you might need to do in order to avoid issues and not to look stupid reporting issues that otherwise wont happen.
Finally, This rom is only possible due to a TON of contributions from my friends @corsicanu and @ananjaser1211 without them you probably wouldn't have seen this ROM.
I have also included the majority of improvements , Aroma and edits from @corsicanu which im sure you guys are familiar with already.
HWC fix on this device was only possible by @ananjaser1211, without him I couldn't have been proceed with the camera fix.
Alright enough chit-chat. Enjoy the ROM. and do let me know in the thread how it is going on your end.
FEATURES
- Android 10.0
- Odex System
- Slightly debloated
- Zipaligned
- Optimized for battery and performance
- Full Samsung OneUI 2.1 Experience
- Magisk Supported
- RMM PrePatched
- Based on A750FNXXS4CTH3
- And all the goodies Android Q / OneUI 2 Brings
- Contains all features from A7 2018 minus hardware specific ones
- All the original features are present (Wifi,Bluetooth, basic camera etc)
QDroid Port Features :-
- Always On Display(Aod Touch, Variable brightness)
- Bluelight Filter
- Samsung BixbyVision
- Samsung DolbyAtmos
- DE-Knoxed and disabled Additional samsung root prevention and security spams
- Full OXM setup with Many samsung supported countries
- Goodlock Pack + Patched Versions
- Heavly optimised for A8/A8+
- Debloated via Aroma (Email, Calculator, Recorder, etc)
- Samsung Avatar
- Samsung Screen Video recorder
- Samsung Smart View
- Digital Wellbeing
- Dual Messenger
- And many more additions
Quantum Quack Kernel :-
- Upstreamed Linux 4.4.177
- WireGuard Support
- OC Little to 1.7Ghz
- UC big/Little to 200/500MHz
- DriveDriod Support
- Multi CPU Governors
- Multi I/O Schedulers
- Multi TCP Algorithms
- Wakelock Blocker v1.1
- Fsync Toggle on/off
- CRC Check Toggle on/off
- Disabled samsung security functions
- SeLinux Permissive
- State Notifier
- Other minor improvments
INSTALL STEPS
Note: We Don't need Treble implementation for this project
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,VENDOR,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash the ROM.ZIP
Setup your rom and READ the F.A.Q for more information.
BUGS
- NFC doesn't work
- Samsung Video Stablisation
- Torch Intensity Control
CREDITS
- @corsicanu and @ananjaser1211 For a ton of support with this Project.
- @TaifAljaloo and @somadsul for always supporting and being nice.
- @soulr344 and @yash92duster for all support and improvement towards project.
- Special thanks to my EliteTeam and TeamExyKings for always being supporting
- If you helped in this rom and i forgot you, Send a PM or contact on Telegram
Downloads. Changelogs , F.A.Qs below
XDA:DevDB Information
QDroid V2.5, ROM for the Samsung Galaxy A8 (2018)
Kernel Sources: https://github.com/prashantpaddune/android_kernel_samsung_jackpotlte
Contributors
prashantp01, Ananjaser1211, Corsicanu
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: v2.5
Created 2020-10-12
Last Updated 2020-10-12
DOWNLOAD
Come hang with us on our chat : Telegram
----------------------------------------------------------------
QDroid V2.5 based on A7 2018 port [LATEST]
Google Drive : Download
QDroid V2.0 based on A7 2018 port
Google Drive : Download
QDroid V1.0 based on A7 2018 port
Google Drive : Download
----------------------------------------------------------------
CHANGELOG
V2.5
- OneUI 2.1
- Fixed Offline charging
- Fixed Force reboots on overcharge
- Added Dolby on Speaker
- Slightly Debloated the base
- Added Applock support
- Enabled few csc tweaks (like LTE mode etc..)
- Switched to HoneyBoard Keyboard
- Dual messenger on all apps
V2.0
- Improve WiFi Stability by Fixing Bluetooth issues
- Fixed Connectivity issues on 2.4ghz Router
- Added new OMC package for new Countries
- Reduced buffer crash when using Camera to reduce its Lag
- Make camera more stable when using 3rd party apps
- Fixed a bug that caused charging to stall in some scenarios
- Fixed Power profiles to reduce Heat and power draw
- Slightly debloated the base
- Fixed Random Glitches in UI
- Boot time decreased
- Overall improved UI Performance / Doze
V1.0
-initial release
FAQ
Good idea to read this F.A.Q While the rom is installing
Q : Do I need to Treble my Device before installing this rom ?
A : No need to Treble your Device, if you already have the treble implementation, make sure you wipe the Vendor partiton.
Q : I have Symlinks error / Rom wont go past splash
A : As the AROMA Told you, don't pick all the bloat. and use default settings if you don't know otherwise
Q : My phone does NOT boot help pls
A : Ensure you have LATEST bootloader and modem installed, did all the wipes, and did your house chores. Make sure your device is supported from the given thread. If you had Treble, Wipe your Vendor partition.
Q : Device is running too hot
A : If it was just set-up, Give it time and make sure everything is up-to-date.
Great work mate !
good job sar
very nice
GG man, thank you
does the work profile works in this rom?
---------- Post added at 06:58 PM ---------- Previous post was at 06:05 PM ----------
do you have any alternative for the video Stablisation issue?
dos the notification led work?
Tmum said:
does the work profile works in this rom?
---------- Post added at 06:58 PM ---------- Previous post was at 06:05 PM ----------
do you have any alternative for the video Stablisation issue?
Click to expand...
Click to collapse
work profile ? video stabilsation works on other camera app
Tmum said:
dos the notification led work?
Click to expand...
Click to collapse
yes it works
what about the led indicator, does it work either?
I think the wifi dosent working perfectly. When I download a big file it starts to go slow. I think its a kernel problem. Isnt it?
CHANGELOG V2.0
V2.0
- Improve WiFi Stability by Fixing Bluetooth issues
- Fixed Connectivity issues on 2.4ghz Router
- Added new OMC package for new Countries
- Reduced buffer crash when using Camera to reduce its Lag
- Make camera more stable when using 3rd party apps
- Fixed a bug that caused charging to stall in some scenarios
- Fixed Power profiles to reduce Heat and power draw
- Slightly debloated the base
- Fixed Random Glitches in UI
- Boot time decreased
- Overall improved UI Performance / Doze
Note: Clean installation is Highly Recommended
Google Drive : Download
prashantp01 said:
CHANGELOG V2.0
V2.0
- Improve WiFi Stability by Fixing Bluetooth issues
- Fixed Connectivity issues on 2.4ghz Router
- Added new OMC package for new Countries
- Reduced buffer crash when using Camera to reduce its Lag
- Make camera more stable when using 3rd party apps
- Fixed a bug that caused charging to stall in some scenarios
- Fixed Power profiles to reduce Heat and power draw
- Slightly debloated the base
- Fixed Random Glitches in UI
- Boot time decreased
- Overall improved UI Performance / Doze
Note: Clean installation is Highly Recommended
Google Drive : Download
Click to expand...
Click to collapse
Nfc work?
Wysłane z mojego Lenovo TB-8703X przy użyciu Tapatalka
adek89 said:
Nfc work?
Wysłane z mojego Lenovo TB-8703X przy użyciu Tapatalka
Click to expand...
Click to collapse
Have you read #1 post ?
Thx u for your great effort!
to install without the sd card?
brenugalvao said:
to install without the sd card?
Click to expand...
Click to collapse
Yes recommended
Hello, first of all I would like to congratulate the developer of this rom and above all thank him. my question is simple, in the battery section I miss the quick charge tap. is it a bug? only the only one who has this problem.
I'm not responsible for whatever damage this could possibly cause to your device.
If you appreciate the work i have done, and want me to continue working on this projet, Feel free to buy me a cup of coffee @paypal
Introducing QDroid - ONEUI 2.1 For Galaxy A8/A8+ 2018 ONLY FOR A530F/A530W/A730F
Some information you should know..
This is a full A7 2018 port with Android Version 10
This ROM is made with heavy collaboration from @corsicanu and @ananjaser1211 make sure to give them coffee.
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
Any sort of File Kanging will be reported without hesitation.
Release Note :-
After a battle that took months on end, im able to deliver you this project in a state were i can deem it as "Daily Driver", This was no easy task, Android Q has changed alot and a skin such as oneui 2.0 was never intended to run on this device, But here we are.
As the nature of "Initial releases" tend to be, expect Bugs, i wrote down the ones i can see and that are actual issues that can affect people. so make sure to read them.
The F.A.Q and Notes page is more important than this entire post. it details stuff that you might need to do in order to avoid issues and not to look stupid reporting issues that otherwise wont happen.
Finally, This rom is only possible due to a TON of contributions from my friends @corsicanu and @ananjaser1211 without them you probably wouldn't have seen this ROM.
I have also included the majority of improvements , Aroma and edits from @corsicanu which im sure you guys are familiar with already.
HWC fix on this device was only possible by @ananjaser1211, without him I couldn't have been proceed with the camera fix.
Alright enough chit-chat. Enjoy the ROM. and do let me know in the thread how it is going on your end.
FEATURES
- Android 10.0
- Odex System
- Slightly debloated
- Zipaligned
- Optimized for battery and performance
- Full Samsung OneUI 2.1 Experience
- Magisk Supported
- RMM PrePatched
- Based on A750FNXXS4CTH3
- And all the goodies Android Q / OneUI 2 Brings
- Contains all features from A7 2018 minus hardware specific ones
- All the original features are present (Wifi,Bluetooth, basic camera etc)
QDroid Port Features :-
- Always On Display(Aod Touch, Variable brightness)
- Bluelight Filter
- Samsung BixbyVision
- Samsung DolbyAtmos
- DE-Knoxed and disabled Additional samsung root prevention and security spams
- Full OXM setup with Many samsung supported countries
- Goodlock Pack + Patched Versions
- Heavly optimised for A8/A8+
- Debloated via Aroma (Email, Calculator, Recorder, etc)
- Samsung Avatar
- Samsung Screen Video recorder
- Samsung Smart View
- Digital Wellbeing
- Dual Messenger
- And many more additions
Quantum Quack Kernel :-
- Upstreamed Linux 4.4.177
- WireGuard Support
- OC Little to 1.7Ghz
- UC big/Little to 200/500MHz
- DriveDriod Support
- Multi CPU Governors
- Multi I/O Schedulers
- Multi TCP Algorithms
- Wakelock Blocker v1.1
- Fsync Toggle on/off
- CRC Check Toggle on/off
- Disabled samsung security functions
- SeLinux Permissive
- State Notifier
- Other minor improvments
INSTALL STEPS
Note: We Don't need Treble implementation for this project
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,VENDOR,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash the ROM.ZIP
Setup your rom and READ the F.A.Q for more information.
BUGS
- NFC doesn't work
- Samsung Video Stablisation
- Torch Intensity Control
CREDITS
- @corsicanu and @ananjaser1211 For a ton of support with this Project.
- @TaifAljaloo and @somadsul for always supporting and being nice.
- @soulr344 and @yash92duster for all support and improvement towards project.
- Special thanks to my EliteTeam and TeamExyKings for always being supporting
- If you helped in this rom and i forgot you, Send a PM or contact on Telegram
Downloads. Changelogs , F.A.Qs below
XDA:DevDB Information
QDroid V2.5, ROM for the Samsung Galaxy A8+ (2018)
Kernel Sources: https://github.com/prashantpaddune/android_kernel_samsung_jackpotlte
Contributors
prashantp01, Ananjaser1211, Corsicanu
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: v2.5
Created 2020-10-12
Last Updated 2020-10-12
DOWNLOAD
Come hang with us on our chat : Telegram
----------------------------------------------------------------
QDroid V2.5 based on A7 2018 port [LATEST]
Google Drive : Download
QDroid V2.0 based on A7 2018 port
Google Drive : Download
QDroid V1.0 based on A7 2018 port
Google Drive : Download
----------------------------------------------------------------
CHANGELOG
V2.5
- OneUI 2.1
- Fixed Offline charging
- Fixed Force reboots on overcharge
- Added Dolby on Speaker
- Slightly Debloated the base
- Added Applock support
- Enabled few csc tweaks (like LTE mode etc..)
- Switched to HoneyBoard Keyboard
- Dual messenger on all apps
V2.0
- Improve WiFi Stability by Fixing Bluetooth issues
- Fixed Connectivity issues on 2.4ghz Router
- Added new OMC package for new Countries
- Reduced buffer crash when using Camera to reduce its Lag
- Make camera more stable when using 3rd party apps
- Fixed a bug that caused charging to stall in some scenarios
- Fixed Power profiles to reduce Heat and power draw
- Slightly debloated the base
- Fixed Random Glitches in UI
- Boot time decreased
- Overall improved UI Performance / Doze
V1.0
-initial release
FAQ
Good idea to read this F.A.Q While the rom is installing
Q : Do I need to Treble my Device before installing this rom ?
A : No need to Treble your Device, if you already have the treble implementation, make sure you wipe the Vendor partiton.
Q : I have Symlinks error / Rom wont go past splash
A : As the AROMA Told you, don't pick all the bloat. and use default settings if you don't know otherwise
Q : My phone does NOT boot help pls
A : Ensure you have LATEST bootloader and modem installed, did all the wipes, and did your house chores. Make sure your device is supported from the given thread. If you had Treble, Wipe your Vendor partition.
Q : Device is running too hot
A : If it was just set-up, Give it time and make sure everything is up-to-date.
Awesome Job. Thanks for your hard work
Great work mate. And best of luck
Trank you
Thanks
prashantp01 said:
FAQ
Good idea to read this F.A.Q While the rom is installing
Q : Do I need to Treble my Device before installing this rom ?
A : No need to Treble your Device, if you already have the treble implementation, make sure you wipe the Vendor partiton.
Q : I have Symlinks error / Rom wont go past splash
A : As the AROMA Told you, don't pick all the bloat. and use default settings if you don't know otherwise
Q : My phone does NOT boot help pls
A : Ensure you have LATEST bootloader and modem installed, did all the wipes, and did your house chores. Make sure your device is supported from the given thread. If you had Treble, Wipe your Vendor partition.
Q : Device is running too hot
A : If it was just set-up, Give it time and make sure everything is up-to-date.
Click to expand...
Click to collapse
Thanks bro, armin is gay
CHANGELOG V2.0
V2.0
- Improve WiFi Stability by Fixing Bluetooth issues
- Fixed Connectivity issues on 2.4ghz Router
- Added new OMC package for new Countries
- Reduced buffer crash when using Camera to reduce its Lag
- Make camera more stable when using 3rd party apps
- Fixed a bug that caused charging to stall in some scenarios
- Fixed Power profiles to reduce Heat and power draw
- Slightly debloated the base
- Fixed Random Glitches in UI
- Boot time decreased
- Overall improved UI Performance / Doze
Note: Clean installation is Highly Recommended
Google Drive : Download
Hello! During these 4 days I caught 2 reboots. Otherwise, everything works fine. Thanks!
I had a reboot twice as well. everything works fain except my gear fit2.I tried all the older plugins without success
Yep, Galaxy Wearable not working. Thanks to the developer by the way, great job!
ilcik001 said:
I had a reboot twice as well. everything works fain except my gear fit2.I tried all the older plugins without success
Click to expand...
Click to collapse
Grab last_kmsg, just after it reboot and before it boots Read thread about how to grab those logs
San4eL said:
Hello! During these 4 days I caught 2 reboots. Otherwise, everything works fine. Thanks!
Click to expand...
Click to collapse
Read the thread about debugging and grab logs
Congratulations on the port¡
Few questions I have: Safety Net Passes? Edge Panel support (will it ever)?, Secured Folder Works? Will NFC get a fix in any updates?
qounik said:
Congratulations on the port¡
Few questions I have: Safety Net Passes? Edge Panel support (will it ever)?, Secured Folder Works? Will NFC get a fix in any updates?
Click to expand...
Click to collapse
Safetynet passes, rest of the features will see
Hey can anyone confirm if Google Pay (India) works on this build? I have seen some people say that SafetyNet passes for their device but Banking Apps don't work (on A8+ devices with GSIs). Do they work on the OneUI version?
Thanks in advance!
front camera does not work
V2.5
SRIHARI_GUY said:
Hey can anyone confirm if Google Pay (India) works on this build? I have seen some people say that SafetyNet passes for their device but Banking Apps don't work (on A8+ devices with GSIs). Do they work on the OneUI version?
Thanks in advance!
Click to expand...
Click to collapse
Did you enabled Magisk Hide from settings ?
reno96 said:
front camera does not work
V2.5
Click to expand...
Click to collapse
Did you clean flash ? If yes, then grab adb logs when it doesn't work