Database Info

Failed to boot LNX 0x0004

Can someone link or share the .sbf file for the verizon 3g xoom, so I can run it using RSD Lite? I am stuck on failed to boot LNX 0x0004

I found the .sbf file, but RSD fails flashing process because it is unable to retrieve initialization files. I guess it is really screwed

bathanr said:
I found the .sbf file, but RSD fails flashing process because it is unable to retrieve initialization files. I guess it is really screwed
Click to expand...
Click to collapse
Can't you flash the images with fastboot?

I could if RSD Lite would have worked. I never could get past the errors. I finally was able to unbrick it by re-installing the drivers a few times and finally my cpu recognized it and I did a fastboot oem unlock.

and how is this development?
Thread closed. Please post in the correct forums.

unlocked bootloader + manual .30 update fail

Title says it all.
Bootloader is unlocked but i try to manually update the .30 firmware (im on .29) ... and i get the poor little droid on his side with a red exclamation mark... why?

BossJ said:
Title says it all.
Bootloader is unlocked but i try to manually update the .30 firmware (im on .29) ... and i get the poor little droid on his side with a red exclamation mark... why?
Click to expand...
Click to collapse
do you have cwm or twrp installed?
if not, you will need to install one of them.
once you do that, you will need to download and unzip the .30 firmware once and make sure it is on your sd card. then you can reboot into recovery and flash the .30 zip.
if you do that, you will then need to reinstall custom recovery again. check out the development section.

BossJ said:
Title says it all.
Bootloader is unlocked but i try to manually update the .30 firmware (im on .29) ... and i get the poor little droid on his side with a red exclamation mark... why?
Click to expand...
Click to collapse
You might want to try this if you are on Windows (credit to: Auliyaa for providing the original guide. Link to original guide after this suggestion):
1. Download the latest Firmware from ASUS support website, which you obviously have done.
2. Download and install Android SDK to your PC. Install the SDK to your C:\ drive or wherever you have your Windows installed. When you launched it, choose to only download the Platform Tools to make sure you have the updated Fastboot.
3. Once the platform tools download finished, close the Android SDK.
4. Extract "blob" file from the Firmware zip file to Android SDK platform-tools directory.
5. Open Command prompt, if you are on Windows
6. Navigate to platform-tools directory
7. Type this in command prompt:
fastboot -i 0x0B05 flash system blob
Click to expand...
Click to collapse
8. For some reason, the transfer seems to fail from time to time. Just try the Fastboot command again if the transfer fail. For me, the 2nd attempt is always successful.
9. Once the transferred is successful, type the following command to reboot your tablet:
fastboot -i 0x0B05 reboot
Click to expand...
Click to collapse
Link Reference: [TF300TG][Guide] Flashing back the original stock ROM
Hope this helps.

[Q] How do I flash this firmware?

Hey everyone who cares to read my posts, I have a question for you all. I tried to use the newest firmware posted this morning by Skrillax @ http://forum.xda-developers.com/showthread.php?t=2095536 . Using RSD Lite 5.7 I had the same problems with this one as the other one, I can't get past getvar commands until I remove them from the .xml, and when I get to system.img it fails saying Failed flashing process, phone returned fail. I really want to know if I can fastboot flash this firmware somehow, all I need is some direction. I am hoping this new firmware is more stable than the other!:good:
EDIT: Just downloaded the RSD 6.0 and it worked! d/l here: https://hotfile.com/dl/174582400/60ad26d/RSDLite_6.0.rar.html
P.S. Also had to remove the two getvar commands from the xml file to get it to work!

Could you do a step by step
RSD Doesn't recognize my Photon Q, I Press the Volume + - and power at the same time, then I go to AP Fastboot Connect it to the computer and RSD 6.0 doesn´t see it

Motorola XT910 Bricked

good afternoon forum Mods if I'm posting in the wrong section I'm sorry and move where it should be post it at I couldn't find a way to open a new thread under Motorola all I was able to see was threads already posted
any way I'm in desperately need of help I have this Motorola XT910 which one was working just fine the only problem that it had was the wifi and bluetooth wouldn't turn on it's a LATAM device and it had 4.1.2 I don't know who updated to this version or how that's all I could see under about phone it has bootloader locked I couldn't tell you if it was root don't really remember I only had it for a couple hrs and decided to flash a different rom to see if the wifi and bluetooh option would be available
this is what I done to the phone so far i'm gonna start from when it was working
I install BMM and I follow all the instructions just like in this post http://forum.xda-developers.com/showthread.php?t=2260951 but phone never booted normally it just got stock on this screen with a gear looking wheel turning I did a back up of my system but could never go to it all i remember being able to go to was this screen on BMM where you can chose what system you want to boot but all I see was artmod rom and all the other system windows were empty so i was just stuck between this screen the gear wheel trying to boot the system and the screen where i could chose the system i wanted to boot into
no help there so battery was low so i removed it charged it with a universal charger over night boot into AP Fastboot and trying flashing the 3 folowing roms with RSD Lite 6.1.4 but every rom gives me the same error message CDT.BIN failed phone return fail
these are the roms i'm trying to flash
Branding: Retail Brazil
Version:9.8.2O-124_SPUL-17 Service
Android Version:4.1.2
with RSD Lite 6.1.4
Branding: Oi Brazil
Version:9.8.2O-124_SPUL-17 Service
Android Version:4.1.2
with RSD Lite 6.1.4
and one from UK with version 4.1.2 as well and no go also i have tried this flash tool HSD-pilots UNBRICK but always gives me error message when trying to flash the booteujb.img file i tried doing directely and as follow
1) download These fastboot files.rar (clink on text)
2)download retailEU. jellybean OTA
3)Download HSD-pilots UNBRICK.rar
4)UNRAR HSD-pilots UNBRICK.rar from step (3) to any new folder (lets name it UNBRICK)
5) UNRAR Fastboot files:
cdrom_signed
cdt.bin_signed
devtree_signed
ebr_signed
mbr_signed
recovery_signed
radio.img
system_signed
from step (1) to Folder from step (4) we named UNBRICK ONLY extract files i said
6)Connect your device to pc
7)open UNBRICK folder Hold shift and right click on white space -> then press OPEN COMMAND WINDOW HERE
8)flash files from step (5) by writing in the command window you opened:
mfastboot flash cdrom cdrom_signed
mfastboot flash cdt.bin cdt.bin_signed
mfastboot flash devtree devtree_signed
mfastboot flash ebr ebr_signed
mfastboot flash mbr mbr_signed
mfastboot flash recovery recovery_signed
mfastboot flash radio radio.img
9)with the phone still connected to PC open UNBRICK folder and tun Unbrick.bat.
10) after unbrick.rar flashed press power button once, and immediately hold volume up + volume down and press power again
11) go down to recovery and press volume up
12) when you just follow instructions in bat file. see android picture press volume down and volume up at the same time and wait for radio to install
13) after installation of radio wipe data and catch -> navigate to factory reset and do it
14) Then go to install update from external memory and install retailEU. jellybean OTA that you downloaded (you have to put it to your external SD card)
15) If all is fine it will update, just reboot and its unbricked
no luck what else can you suggest please any help would be really appreciated

sorry buddy but i didn't read all of your post. cuz i know it. if you can't flash your phone using fastboot recovery bootloader mode and ect... you need to flash using J-TAG or BOX , normal users doesn't have these tools, mobile fixers have these... that is the very last way of flashing...
if i helped you press THANKS button

m3ni said:
sorry buddy but i didn't read all of your post. cuz i know it. if you can't flash your phone using fastboot recovery bootloader mode and ect... you need to flash using J-TAG or BOX , normal users doesn't have these tools, mobile fixers have these... that is the very last way of flashing...
if i helped you press THANKS button
Click to expand...
Click to collapse
I know what J-TAG is but when you say box what box are you talking about?
also what is this error I keep getting in RSD Lite CDT.BIN phone returned fail I couldn't find any useful information on the web or here

re
prz0007 said:
I know what J-TAG is but when you say box what box are you talking about?
also what is this error I keep getting in RSD Lite CDT.BIN phone returned fail I couldn't find any useful information on the web or here
Click to expand...
Click to collapse
because no one faced that problem, even me, but i see lots of pepple failing to flash theyr phones and using j-tag, ok i don't know what is the name of box there, but here they call it box, it will cpnnect to COM1 port and a tiny box is in middle and it will connect to phone! it has its own flash tools and... the box is 20-30$ i never buy one of them, i just pey them for flashing (for some phones that i can't flash)
we can't do this, so maybe you can? i suggest you to call your mobiles caustomare care service, and tell the problom to them, they know what to dp
and i read some where that motorolla uses mtk chipsets
so try a search of " how to flash mtk phones "
it use sp flash tool, sorry
and other thing, i'm so sleepy i cant type any more, if i helped press thanks...

Bricked Acer Liquid Z6 T09

Opening new thread cuz it's too much for [HELP THREAD]
Start here:
https://forum.xda-developers.com/showpost.php?p=77850102&postcount=42169

I used OS_Acer_Acer.T09.AV0M0.1.035.00.EMEA.GEN1_A60M_A.zip to build rom
but it always fail to create system.img
It does create the zipped rom.
I try to copy extracted system folder to 'work' folder but same error.
Is there any log or some way to get more details on that error?

nickless07 said:
I used OS_Acer_Acer.T09.AV0M0.1.035.00.EMEA.GEN1_A60M_A.zip to build rom
but it always fail to create system.img
It does create the zipped rom.
I try to copy extracted system folder to 'work' folder but same error.
Is there any log or some way to get more details on that error?
Click to expand...
Click to collapse
When Assayed will go to step to make a size for the system image you have to put the values. Take as reference the size of your system image that you dumped before and express this value in MB.

SubwayChamp said:
When Assayed will go to step to make a size for the system image you have to put the values. Take as reference the size of your system image that you dumped before and express this value in MB.
Click to expand...
Click to collapse
That did the trick (used size from Auto Tool Unpack Repack .DAT & .IMG for Windows)
I got system.img. Now use system.img and boot.img in sp flash tool with the scatter from your zip or did i miss something?

nickless07 said:
That did the trick (used size from Auto Tool Unpack Repack .DAT & .IMG for Windows)
I got system.img. Now use system.img and boot.img in sp flash tool with the scatter from your zip or did i miss something?
Click to expand...
Click to collapse
Use these two files (system and boot) and put inside the others that you dumped before.

SubwayChamp said:
Use these two files (system and boot) and put inside the others that you dumped before.
Click to expand...
Click to collapse
Ok. which scatter should i use (only the one from your zip does not error) and should i check everything in flash tool or only specific partitions?

@nickless07
Did you see that? it looks that here there are three firmwares for your model :https://www.acer.com/ac/en/US/content/support-product/6995?b=1
Open Menu, open drivers&Manuals and you will see three firmwares under O.S.
---------- Post added at 03:23 AM ---------- Previous post was at 03:21 AM ----------
nickless07 said:
Ok. which scatter should i use (only the one from your zip does not error) and should i check everything in flash tool or only specific partitions?
Click to expand...
Click to collapse
Use just this zip, the rest won´t work, i added some info there.
Put all the files that you dumped but replace for the new system and boot.

SubwayChamp said:
@nickless07
Did you see that? it looks that here there are three firmwares for your model :https://www.acer.com/ac/en/US/content/support-product/6995?b=1
Open Menu, open drivers&Manuals and you will see three firmwares under O.S.
Click to expand...
Click to collapse
Yes i tested all 3 of them in recovery mode. And if you search on website for phone snid 717007914635 you get 2 other firmware. Right now i used the 1.035.00
So use the preloader i dumped means that the preloader i got from your zip

nickless07 said:
Yes i tested all 3 of them in recovery mode. And if you search on website for phone snid 717007914635 you get 2 other firmware. Right now i used the 1.035.00
So use the preloader i dumped means that the preloader i got from your zip
Click to expand...
Click to collapse
And all the firmwares are for recovery, with system.new.dat?
Yes, use this preloader

Ok flashed all of them. Still stuck at boot logo (i got the boot logo back) and now i can mount /system in recovery mode
Should i repeat that with other firmware?

nickless07 said:
Ok flashed all of them. Still stuck at boot logo (i got the boot logo back) and now i can mount /system in recovery mode
Click to expand...
Click to collapse
It´s an advance, you can do the same with these firmwares that you tried before preparing them via Assayed and flash it through Philz recovery.

SubwayChamp said:
It´s an advance, you can do the same with these firmwares that you tried before preparing them via Assayed and flash it through Philz recovery.
Click to expand...
Click to collapse
This does not work. Fastboot can't boot philz due to locked bootloader. Can i flash philz with sp flash tool?

nickless07 said:
This does not work. Fastboot can't boot philz due to locked bootloader. Can i flash philz with sp flash tool?
Click to expand...
Click to collapse
Yes, you can, put Philz renamed recovery and flash only this partition.
How you unlocked before, did you remember what method do you use?

SubwayChamp said:
Yes, you can, put Philz renamed recovery and flash only this partition.
How you unlocked before, did you remember what method do you use?
Click to expand...
Click to collapse
I used fastboot oem unlock then i pressed Vol. Up on device to confirm.
When i do this now the device tells me Unlock failed.
This is happening after i flashed the files from your zip.

Philz fails. I renamed it to recovery.img and only selected that one in sp flash tool (no error) but when entering recovery mode it is stock recovery

nickless07 said:
I used fastboot oem unlock then i pressed Vol. Up on device to confirm.
When i do this now the device tells me Unlock failed.
This is happening after i flashed the files from your zip.
Click to expand...
Click to collapse
These files were from the zip from Acer that you said that before that recovery stock fails to flash so I don´t understand why it could change bootloader status. Then these files from Acer itself are not for your exact version or maybe build update.
Now that you can mount system maybe you can flash the zip through your stock recovery.
Edit: the files that you flashed before from my zip were lk.bin, preloader and trustzone; flash now from all the firmwares that you downloaded these three files (one by one for firmware and try to unlock every time) using SPFlashTool and the working scatter.txt to see if you recover functionality of the bootloader

SubwayChamp said:
These files were from the zip from Acer that you said that before that recovery stock fails to flash so I don´t understand why it could change bootloader status. Then these files from Acer itself are not for your exact version or maybe build update.
Now that you can mount system maybe you can flash the zip through your stock recovery
Click to expand...
Click to collapse
Yes they are update, phone got bricked while performing ota via system updates.
I try'ed that. No luck. I will use assayyed to make some more system.img file with other zip from acer website