i have note 10.1 , and it is rooted and used some softwares on it , few days ago , the software lost and it just opened the recovery screen"power+volume up"
i searched and i guess it is named software brick
i tired to use recovery mode to wide data and cache to put another software but was unsuccessful , tired to wipe data and reset to factory settings but the tablet restart and doesn't reset to factory settings
i tired to use odin to put firmware , it fail and gives me a message ""Can't open the serial(COM) port""
what can i do ??
Related
hello i have problem with s7562 it had indian firmware i flashed with 2 diffrend arabic files but after flash hang on samsung screen the phone is working fine but need to reset full factory first
my problem is i have much quantity so its really hard to reset each pc
even i suppurate bot indian and arabic pda files and i make 4 files from each boot pda modem csc and after that i select boot modem and csc from indian file and pda from arabic but same problem
can i have any solution for this phone?
do i need any extra file to add it in firmware file ??????????????????????//
i just want to bypass from factory setting cuz it wasting my so much time
thanks
Go in stock recovery (home button-> vol down -> power on) and make 'wipe data-factory reset)
Sent from my GT-I9000 using xda app-developers app
I'm having the same problem!!
Hi,
I'm having the same problem!
I've flashed the XXALJ4 rom version and the phone didn't restart completely, freezing with samsung logo!
Since this is my 1st time flashing I've got scared , and had to remove the battery to be able to go into "downloading mode"!
After that I've tried again the same rom, unsuccessfully! So looked on sammobile for a different rom, and at least got the phone working again, although this isn't the XXALJ4 rom!
So have tried over and over again (also w/ a different PC), and with no success flashing the XXALJ4 rom!
With this trials what I've found different is that, when I star the process with Odin flashing XXALJ4 rom, it freezes (shows "not responding" message) for some seconds, but after that the process seems OK, but at the end of it the phone doesn't work!!!
I really want to flash the KyleOPEN ROM, but without solving this problem, I can't go forward with it!!!:crying::crying:
i need solution without (wipe data/factory default) cuz i always have big quantity of mobile so its taking so much time to wipe data
can any one help me
Please Help!!!!! I have a rooted Samsung Galaxy S3 that I have a problem with. I was going through my phone trying to get java to work on the phone and I noticed you had to copy a file into the lib folder, so when I tried to start all over to see if I had done something wrong I deleted the lib folder and right when I did that the phone kept saying touchwiz has stopped working, so i turned it off and turned it on and then it wouldnt get passed the white samsung logo and then went straight to Android update recovory and if i put reboot now it just keeps taking back to the recovery state, I also did wipe data and factory reset but that didnt work either. I have tried to flash a custom firmware that i flashed on it to get it rooted but the problem stays the same is there anyway i can fix this and get my phone back?
thehusk said:
Please Help!!!!! I have a rooted Samsung Galaxy S3 that I have a problem with. I was going through my phone trying to get java to work on the phone and I noticed you had to copy a file into the lib folder, so when I tried to start all over to see if I had done something wrong I deleted the lib folder and right when I did that the phone kept saying touchwiz has stopped working, so i turned it off and turned it on and then it wouldnt get passed the white samsung logo and then went straight to Android update recovory and if i put reboot now it just keeps taking back to the recovery state, I also did wipe data and factory reset but that didnt work either. I have tried to flash a custom firmware that i flashed on it to get it rooted but the problem stays the same is there anyway i can fix this and get my phone back?
Click to expand...
Click to collapse
Which recovery are you running (stock, CWM,TWRP,Philz etc) ?
As I see it, you've got 2 options:
1- Flash back to stock rom using Odin (see S3 thread FAQ)
2- Download other custom rom (I suggest the one i'm using), copy it into your device (you can mount your device SD in recovery mode),
perform wipe data + cache wipe + delvik wipe, and flash the rom.
Hello
I have a P3100 16gb tab... it was working normally and suddenly it went through a boot loop for no good reason... thought it might be an app prob so started to uninstall some when I noticed that after the tab reboots it resets everything and the deleted apps are back again... tried factory reset and nothing.. hard reset and nothing.. flashing using odin.. still nothing...over and over the tab is restored to an earlier state and doesn't respond at all to any changes...
There is an error that shows when I went into recovery mode " did not match sized '/system/csc/common/system/lib/libVideoHub.so ( No Data Available) "
any suggestions?
Thanks in advance
anything?
Same Problem
Same Problem with My Samsung Galaxy Tab 2
Reboot Loop
Data/Factory Resent not deleting any data
Not Flashing With Odin its Giving an error
not flashing with any Custom Rom :crying::crying:
Please some find solution
Thanks in advance :good:
My samsung galaxy tab 2 7.0 is turning on and off continuously. I connected it with the charger and I pressed the power button. Is stoping the endless reboot but when I tried again faced the same problem.
First I done :- ( for root)
I read about the rooting procedure on various threads on the forum, watched loads of videos online and yet have failed:
1. I have download ODIN & Tried to root the device using the “CF-Auto-Root-espressorf-espressorfxx-gtp3100.tar.md5” file
2. ODIN flashed the device correctly as the left-side bottom corner status window in ODIN showed Success – the ODIN windows right above the one that shows the [ID: COM 9] also displayed “PASS” in green color after the Tab restarted.
3. However, after the Tab restarted – displayed the splash screen on bootup & its stuck there
After that I done this :-
I am downloading “P3100DDCNA3_P3100ODDCNB1_INU.zip” from sammobile.com I will attempt to load the file in ODIN. Successful. But again it stucks on samsung logo.
I can open 'Downloading Mode ' and also ' Recovery Mode '
I don't want to erase or wipe my whole data. ( factory reset)
Please Help me out....!!!!
Full wipe and factory reset may be your only option, the rom that's running may have corrupted some system files and the only way to fix it may be doing a factory reset.
Pp.
PanchoPlanet said:
Full wipe and factory reset may be your only option, the rom that's running may have corrupted some system files and the only way to fix it may be doing a factory reset.
Pp.
Click to expand...
Click to collapse
Can I get backup of my data..???
If your PC will allow you to access your files while in download mode , you can copy them to a folder on your PC and restore data later .
Pp.
Maybe flash a custom recovery and use adb to pull your data.
Make sure, you don't own a verizon or sprint tab - different devices, using p31xx firmware/recovery will end in a hardbrick!
Send from OnePlus One using Tapatalk
akshan1234 said:
My samsung galaxy tab 2 7.0 is turning on and off continuously. I connected it with the charger and I pressed the power button. Is stoping the endless reboot but when I tried again faced the same problem.
First I done :- ( for root)
I read about the rooting procedure on various threads on the forum, watched loads of videos online and yet have failed:
1. I have download ODIN & Tried to root the device using the “CF-Auto-Root-espressorf-espressorfxx-gtp3100.tar.md5” file
2. ODIN flashed the device correctly as the left-side bottom corner status window in ODIN showed Success – the ODIN windows right above the one that shows the [ID: COM 9] also displayed “PASS” in green color after the Tab restarted.
3. However, after the Tab restarted – displayed the splash screen on bootup & its stuck there
After that I done this :-
I am downloading “P3100DDCNA3_P3100ODDCNB1_INU.zip” from sammobile.com I will attempt to load the file in ODIN. Successful. But again it stucks on samsung logo.
I can open 'Downloading Mode ' and also ' Recovery Mode '
I don't want to erase or wipe my whole data. ( factory reset)
Please Help me out....!!!!
Click to expand...
Click to collapse
look like broken emmc
okay, i rooted my galaxy trend plus and deleted some file system after that i tried to open play store and youtube but it showed me an error message so i tried to turn off the device but it kept turn on for few sec and turn off again. tried to wipe data factory reset but it say E: cant mount...... something. i tried everything
please help!!!!
wildrage1 said:
okay, i rooted my galaxy trend plus and deleted some file system after that i tried to open play store and youtube but it showed me an error message so i tried to turn off the device but it kept turn on for few sec and turn off again. tried to wipe data factory reset but it say E: cant mount...... something. i tried everything
please help!!!!
Click to expand...
Click to collapse
Hi there,
You must flash stock firmware with Odin to restore your device.
Please see this thread even is not for Trend Plus exactly:
Flashing Galaxy Trend GT-S7560 to stock
Good luck