hello i have problem with s7562 it had indian firmware i flashed with 2 diffrend arabic files but after flash hang on samsung screen the phone is working fine but need to reset full factory first
my problem is i have much quantity so its really hard to reset each pc
even i suppurate bot indian and arabic pda files and i make 4 files from each boot pda modem csc and after that i select boot modem and csc from indian file and pda from arabic but same problem
can i have any solution for this phone?
do i need any extra file to add it in firmware file ??????????????????????//
i just want to bypass from factory setting cuz it wasting my so much time
thanks
Go in stock recovery (home button-> vol down -> power on) and make 'wipe data-factory reset)
Sent from my GT-I9000 using xda app-developers app
I'm having the same problem!!
Hi,
I'm having the same problem!
I've flashed the XXALJ4 rom version and the phone didn't restart completely, freezing with samsung logo!
Since this is my 1st time flashing I've got scared , and had to remove the battery to be able to go into "downloading mode"!
After that I've tried again the same rom, unsuccessfully! So looked on sammobile for a different rom, and at least got the phone working again, although this isn't the XXALJ4 rom!
So have tried over and over again (also w/ a different PC), and with no success flashing the XXALJ4 rom!
With this trials what I've found different is that, when I star the process with Odin flashing XXALJ4 rom, it freezes (shows "not responding" message) for some seconds, but after that the process seems OK, but at the end of it the phone doesn't work!!!
I really want to flash the KyleOPEN ROM, but without solving this problem, I can't go forward with it!!!:crying::crying:
i need solution without (wipe data/factory default) cuz i always have big quantity of mobile so its taking so much time to wipe data
can any one help me
Related
Hi,
I have a Samsung GIO S5660 (no carrier, no lock or branding or something, originally GB 2.3.4, stockware updated to 2.3.6), rooted and installed Clockworkmod Recovery (5.0.2.6) and followed the instruction to the letter when I tried to install an ICS ROM: this one here.
I tried others too. But unfortunately the result is the same everytime. Installation successfully completes, wipe data / factory reset (tried that several times before and after installing). And when rebooting, the SamsungMobile logo is shown, the screen flashes white for a split second and goes dark but is obviously still powered up (glows a little). And then nothing happens. I have to remove the battery to bring it back to life then, which right now is of course nothing more then another reboot into recovery.
Any ideas? Am I using the wrong ROM versions? It says something about format failed when doing the wipe because of missing ext4 access ... ?! Do I have to use a different CWM Recovery? But I do use the one mentioned and linked to in the tutorial ...
Regards,
Mac
Uhm, I just had to wait a little longer for the ROM to start up. Sorry, ROM works alright.
Mac
Hello,
to all of you.
I need urgent help, actually, some days ago, my Galaxy tab 7.7 has stuck in a bootloop, the respected user UpInTheAir has helped me a lot by providing a needy guidance to me, actually, I didnt want to factory reset the tab because the data stored on the tab was very important, you can read more about this case here : http://forum.xda-developers.com/showthread.php?t=2530591, I tried very very hard to load custom recovery to the tab, so that I can take backup of the data, but all was vain, I even downloaded the official firmware and tried to flash the tab through desktop odin, and got successful messages of pass etc.but when the tab restarts they show the same symptom of bootlooping and all my data is still available on the tab, although I can start my tab in the safe mode, but that is also for 5 to 7 minutes after that it restarts automatically, during this time I can also connect my tab to computer and it shows there, so today I decided to reset the tab to get rid of this problem, I boot into the stock recovery and there choose the option wipe data/factory reset, it was successfully implemented but when I reboot my tab, it shows the same symptom of bootlooping as well as all my data is still present, same starting, same password, then I restart my tab in safe mode and choose the factory reset option from there, it restarts my tab into the stock recovery, there I again choose the option of wipe data/factory reset, but same happens, I dont know what happened to my tab, I think this is some kind of bug, because everything goes well just after restart the tab, everything comes out same as nothing happens.Please respected members, respected developers help me, I really need this.Suggest some way to me, so that I can get out of this problem.Hope to see reply soon.Thank You.
Regards,
MOBILGEEK6
MOBILGEEK said:
Hello,
to all of you.
I need urgent help, actually, some days ago, my Galaxy tab 7.7 has stuck in a bootloop, the respected user UpInTheAir has helped me a lot by providing a needy guidance to me, actually, I didnt want to factory reset the tab because the data stored on the tab was very important, you can read more about this case here : http://forum.xda-developers.com/showthread.php?t=2530591, I tried very very hard to load custom recovery to the tab, so that I can take backup of the data, but all was vain, I even downloaded the official firmware and tried to flash the tab through desktop odin, and got successful messages of pass etc.but when the tab restarts they show the same symptom of bootlooping and all my data is still available on the tab, although I can start my tab in the safe mode, but that is also for 5 to 7 minutes after that it restarts automatically, during this time I can also connect my tab to computer and it shows there, so today I decided to reset the tab to get rid of this problem, I boot into the stock recovery and there choose the option wipe data/factory reset, it was successfully implemented but when I reboot my tab, it shows the same symptom of bootlooping as well as all my data is still present, same starting, same password, then I restart my tab in safe mode and choose the factory reset option from there, it restarts my tab into the stock recovery, there I again choose the option of wipe data/factory reset, but same happens, I dont know what happened to my tab, I think this is some kind of bug, because everything goes well just after restart the tab, everything comes out same as nothing happens.Please respected members, respected developers help me, I really need this.Suggest some way to me, so that I can get out of this problem.Hope to see reply soon.Thank You.
Regards,
MOBILGEEK6
Click to expand...
Click to collapse
Hello,
to all of you.
I posted this thread in the hope to getting some help from some respected member, but after so many views, I think no one is willing to help, anyways, it seems the experienced developers and most respected members are busy in making their custom roms better, anyways, I hope some "NOOB" from some part of the world will help to solve my problem and able me so that I can install the custom rom from some "Experienced Developer".Thank You.
Regards,
MOBILGEEK
I don't think u can do anything about ur data. Too bad u'll be losing it.
Android 4.1.2 has already come out for our tablet. U can download either the Singapore, Malaysian or Indonesian version.
Flash the latest firmware via Odin.
Then go to stock recovery and clear cache and clear all data.
That'll give u a clean install. At least ur tablet will no longer bootloop. That's the only way that I can think of.
After that u can flash either a cwm or twrp recovery.
Remember to always keep a n android backup somewhere...
Buy a valid copy of titanium back up.
By the way, if u still have a cwm recovery installed, go to advanced and try clearing dalvik cache too.
Sent from my GT-N7100 using Tapatalk
Hey everyone, I'm using a GT-P5100 (3G + Wifi) O2 UK rooted tablet and for the last month it has been broken. It started rebooting itself randomly every now and then, and then suddenly it wouldn't even boot up for 15 seconds before it would restart itself again.
I am able to get into safe mode and I can get into the boot options, but when I factory reset it does nothing, I've tried from the boot menu, from safe-mode options and even from the dial up code.
I tried to connect my tablet to my PC as a media device and format it but that didn't work either; I can't connect it as a disk then format it that way because they took out 'mass storage mode' on this firmware.
I then tried to flash a stock ROM in Odin but every time I tried it would fail until I used Odin.v1.3, but guess what, it rebooted itself and my entire tablet is still exactly the same.
(the option was on AP ram in v1.3 not AP nand I don't know if that makes a difference.)
If anyone can point me in the right direction I would appreciate it so much. I have been trying for weeks to fix this and I just don't know what to do anymore, I tried on another forum but nobody answered me.
Everyone else gets replies and I get zilch; amazing. I don't know what it is that is preventing my tablet from wiping itself but it refuses to clear the current data no matter what way I try (ROM, factory reset, computer format). If someone could just tell me what that is and what I have to do about it that would be grand.
You mention "rooted " but you don't mention what current rom or past roms that you may have flashed, you could have some sort of rom cluster [email protected]$k going on in your tab but NO one else will ever be able to help because of lack of INFO or history.
Pp.
I standard rooted it from Odin. This is my first ROM I am trying to flash. I just need to know what would prevent a tablet from rebooting itself properly. Factory reset, format and flash is not working so I must assume that rebooting is the issue here.
If you are running stock rooted rom and having issues like this the only way out is reflashing the stock firmware complete (not just a rom) and see if that fixes it before you try any other roms.
If you can get into download mode thats the fix.
Pp.
To flash it completely do I need more than an MD5 file? (I also have the partition file for my model). Another question, if the tablet is having issues with the reboot after a flash, will updating from a microSD with a zip help? Thanks for the advice.
Hi all, I recently got a second hand Samsung galaxy S4 (GT-I9505) as a gift from a friend. I realized it had a problem that every time I went on certain applications especially settings I'd get a warning saying 'Unfortunately,'said app(settings)' has stopped.' I decided to factory reset my phone using the 'volume up, home button and power key' and I also wiped cache and even rebooted it, yet the problem still persists. Now when I try to turn on my phone and I get onto the set-up page when I try to press next it says 'Unfortunately settings has stopped' and takes me back to the start which I believe is called a boot-loop, I'm not sure though. I'm not to sure how my friend managed to get the phone to this state before he gave it to me and I think it may have either been that he downloaded a faulty application or that he tried to update the phone and then this problem occurred. Now I'm not too experienced when it comes to Custom Roms and things but I heard there is a solution which requires you to press the volume down and power key in order to download a Custom Rom but I'm not sure how I'll download one without the help of my phone(which remains in the boot-loop). And I'm also 100% sure that no Roms have been downloaded on the phone ever.
Any help is appreciated. Thanks in advance
kwesi101 said:
Hi all, I recently got a second hand Samsung galaxy S4 (GT-I9505) as a gift from a friend. I realized it had a problem that every time I went on certain applications especially settings I'd get a warning saying 'Unfortunately,'said app(settings)' has stopped.' I decided to factory reset my phone using the 'volume up, home button and power key' and I also wiped cache and even rebooted it, yet the problem still persists. Now when I try to turn on my phone and I get onto the set-up page when I try to press next it says 'Unfortunately settings has stopped' and takes me back to the start which I believe is called a boot-loop, I'm not sure though. I'm not to sure how my friend managed to get the phone to this state before he gave it to me and I think it may have either been that he downloaded a faulty application or that he tried to update the phone and then this problem occurred. Now I'm not too experienced when it comes to Custom Roms and things but I heard there is a solution which requires you to press the volume down and power key in order to download a Custom Rom but I'm not sure how I'll download one without the help of my phone(which remains in the boot-loop). And I'm also 100% sure that no Roms have been downloaded on the phone ever.
Any help is appreciated. Thanks in advance
Click to expand...
Click to collapse
serach for flashing stock s4 ROMs via odin ....that should help for sure ....you can flash a factory ROM with this method and think your problem will be solved
Download factory ROM and download custom recovery(like philz touch or twrp), flash custom recovery via Odin...if its flashed successfully, goto recovery mode ( by pressimg buttons..sorry I don't know much about Samsung but I know to flash ROMs) if u entered recovery mode first wipe cache, wipe dalvik cache, wipe to install new ROM, then goto the option "install from SD" select the factory ROM package and wait until its finished fully....after flashing reboot your phone...and then ur phone is fully fixed..hope u will get ur problem solved soon....(thanx me if its helped am new to xda and I need some fame for helping more no. Of PPL and solving their problems) thank you....
devwaseem said:
Download factory ROM and download custom recovery(like philz touch or twrp), flash custom recovery via Odin...if its flashed successfully, goto recovery mode ( by pressimg buttons..sorry I don't know much about Samsung but I know to flash ROMs) if u entered recovery mode first wipe cache, wipe dalvik cache, wipe to install new ROM, then goto the option "install from SD" select the factory ROM package and wait until its finished fully....after flashing reboot your phone...and then ur phone is fully fixed..hope u will get ur problem solved soon....(thanx me if its helped am new to xda and I need some fame for helping more no. Of PPL and solving their problems) thank you....
Click to expand...
Click to collapse
I think downloading and flashing the rom from a computer would be easier. Just download the correct files from sammobile and flash them via Odin. Also you will need Samsung drivers, you can get them by installing kies or if you search here in the forums im pretty sure you'll find them too.
Sent from my GT-I9505G using XDA Free mobile app
Hi Guys, first time posting here
Well im having problems with my phone Galaxy S7 G930F, first time updating it via OTA and problems started. First update that my phone recibed via OTA and freeze during installation, have to do a hard reboot and it pass.
Going back to factory reset didn't help me.
The phone reboot doing nothing o regular use and enters in bootloops in Galaxy S7 G930F android and the only way to stop it sometimes its to use the recovery and power off or if im lucky just reboot.
So i think its a software issue, so tried using samsung smartswich and keeps with the problems.
Next i flash my phone via ODIN using the another firmware for my phone model. and i noticed i cant seem to use the CSC file, the phone just freeze during earising or installing system.
So next i have to flash using HOME_CSC, i know how it work but for a month i had no issues but i didn't install third party's apps , pass that time keeps freezesing doing nothing o regular use, rebooting, bootloops, etc.
Try to flash to another firmware this time from my country Argentina unbranded lastest firmaware, but i cant use CSC file again, the phone just freezes during installation.
I guess it have to be something relating to memory partition.
In ODIN options im just using the default options Auto Reboot and F. Time Reset. Should i use the Re-Partition also and flash with the CSC file? to try? the FRP lock is ON dont know if that will be an issue or posible brick.
If someone could help me plz