Related
hi i just read the news on LG Thrill via Android Police
and ATT has released ICS for LG Thrill
can any dev post how to install it on P920 the international version of LG optimus 3D
Many Thanks.
http://www.androidpolice.com/2013/03/19/att-resurrects-the-lg-thrill-4g-from-the-dead-gives-it-ics/
coolshah said:
hi i just read the news on LG Thrill via Android Police
and ATT has released ICS for LG Thrill
can any dev post how to install it on P920 the international version of LG optimus 3D
Many Thanks.
http://www.androidpolice.com/2013/03/19/att-resurrects-the-lg-thrill-4g-from-the-dead-gives-it-ics/
Click to expand...
Click to collapse
You're very late. Look around. You install it as you would any KDZ. Supported languages are English, Spanish, and French.
Android1993 said:
You're very late. Look around. You install it as you would any KDZ. Supported languages are English, Spanish, and French.
Click to expand...
Click to collapse
but mylg update tool is giving me problems it not running
giving me this error
"please check your internet line and execute program again"
do you have the link for KDZ file?
coolshah said:
but mylg update tool is giving me problems it not running
giving me this error
"please check your internet line and execute program again"
do you have the link for KDZ file?
Click to expand...
Click to collapse
KDZ: http://forum.xda-developers.com/showthread.php?t=2196494
Bin Files: http://forum.xda-developers.com/showthread.php?t=2198069
You can use whichever method you're accustomed to. I usually do KDZ.
Android1993 said:
KDZ: http://forum.xda-developers.com/showthread.php?t=2196494
Bin Files: http://forum.xda-developers.com/showthread.php?t=2198069
You can use whichever method you're accustomed to. I usually do KDZ.
Click to expand...
Click to collapse
you can use LG flash tool to flash Bin files , following this guide don't forget to use P925 dll
http://www.technopat.net/forum/android-telefonlari/9128-lg-optimus-3d-ultimate-flash-guide.html
Re: Official 3D ICS Update! AT&T Resurrects The LG Thrill 4G From The Dead, Gives It
coolshah said:
but mylg update tool is giving me problems it not running
giving me this error
"please check your internet line and execute program again"
I also had this problem but after about 2 hours i managed to update my phone: here how i did the update:
Just connect to internet then immediately disconnect from internet within 1 or 1.5 seconds the program just needs to confirm that there is an established connection, i used this (my own) trick and I successfully updated my LO3D froyo to GB using kdz
Keep in mind that you need to connect to internet only for 1 second then DISCONNECT internet
Good luck
Click to expand...
Click to collapse
Hi i tried to flash it (.bin files) and once its done flashing and the phone reboots i get this message
"Encryption unsuccessful"
It has a button with Reset phone i press it but nothing happens i tried to reboot phone 5 times no luck please help many thanks.
coolshah said:
Hi i tried to flash it (.bin files) and once its done flashing and the phone reboots i get this message
"Encryption unsuccessful"
It has a button with Reset phone i press it but nothing happens i tried to reboot phone 5 times no luck please help many thanks.
Click to expand...
Click to collapse
Power off the phone and press Power + VOL Down + 3D as you usually would to get into recovery. From there you follow the steps to factory reset your device.
Android1993 said:
Power off the phone and press Power + VOL Down + 3D as you usually would to get into recovery. From there you follow the steps to factory reset your device.
Click to expand...
Click to collapse
Mine was only Power and VOL down , and i reset factory my phone, he can try both way
Android1993 said:
Power off the phone and press Power + VOL Down + 3D as you usually would to get into recovery. From there you follow the steps to factory reset your device.
Click to expand...
Click to collapse
kupuku said:
Mine was only Power and VOL down , and i reset factory my phone, he can try both way
Click to expand...
Click to collapse
oh my God Thank You Very much man I love you guys thanks foe the tips. you guys saved me.
this method worked: "Power and VOL down" than it asked me for factory reset
well after I set it up
now it wont get any network I am currently in UK using LYCA mobile can any one tell me any solution?
coolshah said:
well after I set it up
now it wont get any network I am currently in UK using LYCA mobile can any one tell me any solution?
Click to expand...
Click to collapse
Just flash the right baseband you will get it works, you should try V28 baseband , if it doesn't try the V30 one
here http://d-h.st/Zzs
kupuku said:
Just flash the right baseband you will get it works, you should try V28 baseband , if it doesn't try the V30 one
here http://d-h.st/Zzs
Click to expand...
Click to collapse
same no luck i tried the one you posted and the one that came with ics LGP925_V30B_00_CP.fls
still no network
Hope someone can help
I was running GB rooted. No custom ROM just rooted.
I saw the update, so I wanted to start fresh. I reset the phone, installed the update (lost root, as expected), went to apply root with Megatron Root Exploit, and it would not allow me to obtain root. Kept getting an error about directory not found. Don't recall the exact error.
I am currently running the ICS update with no issues, but would like to be rooted as I am missing a few apps that require root.
Any ideas?
Thanks in advance
tmoca said:
I was running GB rooted. No custom ROM just rooted.
I saw the update, so I wanted to start fresh. I reset the phone, installed the update (lost root, as expected), went to apply root with Megatron Root Exploit, and it would not allow me to obtain root. Kept getting an error about directory not found. Don't recall the exact error.
I am currently running the ICS update with no issues, but would like to be rooted as I am missing a few apps that require root.
Any ideas?
Thanks in advance
Click to expand...
Click to collapse
to root use this procedure http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband
coolshah said:
to root use this procedure
Click to expand...
Click to collapse
What procedure??? I am not sure what you mean?
tmoca said:
What procedure??? I am not sure what you mean?
Click to expand...
Click to collapse
sorry i forgot the link i just added it in the post
http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband
coolshah said:
sorry i forgot the link i just added it in the post
http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband
Click to expand...
Click to collapse
Sorry if this is a dumb question, but I am still a bit of a noob. I have only rooted once.
It appears form the link you posted that this is installing a custom rom. That is not what I am looking to do. Previously I was running GB, stock, just rooted to be able to freeze some apps and use a few apps that required root. That is all that I am looking to do at this point too.
ICS is loaded and running fine. Is there a way to get root back with out flashing and installing custom roms? or is this something that the hasn't been figured out yet?
Thanks again for your time and patience with me
tmoca said:
Sorry if this is a dumb question, but I am still a bit of a noob. I have only rooted once.
It appears form the link you posted that this is installing a custom rom. That is not what I am looking to do. Previously I was running GB, stock, just rooted to be able to freeze some apps and use a few apps that required root. That is all that I am looking to do at this point too.
ICS is loaded and running fine. Is there a way to get root back with out flashing and installing custom roms? or is this something that the hasn't been figured out yet?
Thanks again for your time and patience with me
Click to expand...
Click to collapse
so what rom you are on? ICS or GB?
if you are on ICS
than only follow the Root steps there http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband
How to root:
1. Download Su_Bbox_1.20.2_gazhead_signed.zip and save it somewhere in your SD card
2. Use OS_Hacking's tool to install Wkpark's v1.25a bootloader (read his instructions and install OMAP driver first). After this step, your boot-up LG logo will be silver!
3. With the same tool install a GB recovery. (ICS recoveries are only for xbsall's ported SU760 ROM, they can't read your internal SD)
4. Boot into recovery
5. Flash the zip from step (1) and reboot
Root?
coolshah said:
so what rom you are on? ICS or GB?
if you are on ICS
than only follow the Root steps there http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband
How to root:
1. Download Su_Bbox_1.20.2_gazhead_signed.zip and save it somewhere in your SD card
2. Use OS_Hacking's tool to install Wkpark's v1.25a bootloader (read his instructions and install OMAP driver first). After this step, your boot-up LG logo will be silver!
3. With the same tool install a GB recovery. (ICS recoveries are only for xbsall's ported SU760 ROM, they can't read your internal SD)
4. Boot into recovery
5. Flash the zip from step (1) and reboot
Click to expand...
Click to collapse
This looks like I have to bootload a custom rom and go back to gingerbread? Excuse my noobness you can see I just registered to ask this question. Also load a different baseband from the V30 I am on now?
I finally got ICS and dont want a custom ROM like tmoca asked.
Please help! I clicked to update my lg g#3 on at&t and now it is stuck in twrp recovery and I can't get it to restart normally. I had no IDea this would be a problem as this is the first time I have tried to update since I installed twrp. whe what do I do? Help
Jaison33056 said:
Please help! I clicked to update my lg g#3 on at&t and now it is stuck in twrp recovery and I can't get it to restart normally. I had no IDea this would be a problem as this is the first time I have tried to update since I installed twrp. whe what do I do? Help
Click to expand...
Click to collapse
Can't update with custom recovery.. Flash tool back to KitKat and hang out in the lounge...
2SHAYNEZ
shayneflashindaily said:
Can't update with custom recovery.. Flash tool back to KitKat and hang out in the lounge...
2SHAYNEZ
Click to expand...
Click to collapse
I don't know what "Flash tool back to KitKat and hang out in the lounge" means?
http://forum.xda-developers.com/showthread.php?t=2820827
2SHAYNEZ
Go to YouTube and search lg g3 boot loop, scroll down to the video by zedomax (how to unroot/unbrick lg g3!)
This video helped me, I did the exact same thing a few months ago! Hope this helps, I know how frightening it is.
Jaison33056 said:
Please help! I clicked to update my lg g#3 on at&t and now it is stuck in twrp recovery and I can't get it to restart normally. I had no IDea this would be a problem as this is the first time I have tried to update since I installed twrp. whe what do I do? Help
Click to expand...
Click to collapse
Hey, I got you. I had the exact same problem yesterday... It was infuriating.
So boot to TWRP, plug your phone into your computer, then in TWRP go to advanced and hit enable MTP. This should allow your computer to access the G3's files after you've connected it. If you can't, google for the LG PC drivers for your model (it's easy).
Here's the zip you need to place on your device:
http://downloads.codefi.re/autoprime/LG/LG_G3/flash2/LG_G3_Flash2FixStuckRecovery.zip
Then just flash it and you're golden!
OP: http://forum.xda-developers.com/lg-g3/development/fix-stuck-custom-recovery-trying-ota-t2907508
Have a look at this
Jaison33056 said:
Please help! I clicked to update my lg g#3 on at&t and now it is stuck in twrp recovery and I can't get it to restart normally. I had no IDea this would be a problem as this is the first time I have tried to update since I installed twrp. whe what do I do? Help
Click to expand...
Click to collapse
Hi, Have a look at this guide: http://www.mylgphones.com/lg-g2-bricked-keeps-going-right-back-to-the-recovery
It work on LG G2 model which stuck in twrp recovery.
Wish this helps!
CITIZEN INSANE, Your fix worked perfectly!
CitizenInsane said:
Hey, I got you. I had the exact same problem yesterday... It was infuriating.
So boot to TWRP, plug your phone into your computer, then in TWRP go to advanced and hit enable MTP. This should allow your computer to access the G3's files after you've connected it. If you can't, google for the LG PC drivers for your model (it's easy).
Here's the zip you need to place on your device:
http://downloads.codefi.re/autoprime/LG/LG_G3/flash2/LG_G3_Flash2FixStuckRecovery.zip
Then just flash it and you're golden!
OP: http://forum.xda-developers.com/lg-g3/development/fix-stuck-custom-recovery-trying-ota-t2907508
Click to expand...
Click to collapse
Citizen Insane, I think I love you! I was at my wits end. I literally stopped trying to fix it and decided when the at&t store opened I would go buy a new phone. Then I saw I had a new message on this post. Your fix absolutely worked like a charm and REALLY saved my bacon! I am fairly new to XDA but you saved me $700 for the cost of the new phone and I would really like to thank you! Is there anything I can do to thank you (like donate $20 to you or something)? Please let me know, man. I don't know what I would have done without your help! HUGE THANKS!!!
Really... Lol smh ...mods please close thread
2SHAYNEZ
@Jaison33056 Which OTA update caused the boot loop,the KitKat 4.4.2 D85010F or the one for Lollipop? If the one for Lollipop you may have inadvertently found a way to have a custom recovery installed with stock Lollipop firmware! Sorry if this is already general knowledge. Just got my D850 LG G3 and trying to learn all there is to have it running a custom recovery with a rooted stock Lollipop ROM ).
Jaison33056 said:
Citizen Insane, I think I love you! I was at my wits end. I literally stopped trying to fix it and decided when the at&t store opened I would go buy a new phone. Then I saw I had a new message on this post. Your fix absolutely worked like a charm and REALLY saved my bacon! I am fairly new to XDA but you saved me $700 for the cost of the new phone and I would really like to thank you! Is there anything I can do to thank you (like donate $20 to you or something)? Please let me know, man. I don't know what I would have done without your help! HUGE THANKS!!!
Click to expand...
Click to collapse
Your sincere appreciation is my reward as an XDA noobie myself. Just glad to help out <3
MaMMiTs said:
@Jaison33056 Which OTA update caused the boot loop,the KitKat 4.4.2 D85010F or the one for Lollipop? If the one for Lollipop you may have inadvertently found a way to have a custom recovery installed with stock Lollipop firmware! Sorry if this is already general knowledge. Just got my D850 LG G3 and trying to learn all there is to have it running a custom recovery with a rooted stock Lollipop ROM ).
Click to expand...
Click to collapse
The OTA bootloop was caused by the 5.0 Lollipop update. After using the fix from citizen insane it was clear that I was still on 4.4.2 KitKat. The phone quickly attempted to force me to update to lollipop again, so again I was forced to use citizen insane fix again, with the addition of shutting off OTA updates after the fix was completed through the hidden menus in the phone app. Then I quickly flashed Cyanogenmod 12 nightlies to avoid the dreaded OTA update yet again! What a pain in the ass, but on the bright side I absolutely love CM 12! My phone has never performed better. Thanks for everyone's help on XDA!
Hey Jaison does your picture messaging work after flashing CM12? Mine stopped working but texting and phone calls still work.
Big Thanks to @bender_007!
He was nice enough to make Autorec compatible with the newest lollipop OTA 5.02 30F. I tested it for him and it works!
Check it out in the Play Store!
https://play.google.com/store/apps/details?id=b007.autorecd800&hl=en
Don't forget to give him some thanks and if you feel inclined to, some donation.
Just root your lollipop g2, here's an informative video on it https://www.youtube.com/watch?v=i22O9VHGi3k , then install Autorec from Playstore and then you'll get TWRP!
guapinoy said:
Big Thanks to @bender_007!
He was nice enough to make Autorec compatible with the newest lollipop OTA 5.02 30F. I tested it for him and it works!
Check it out in the Play Store!
https://play.google.com/store/apps/details?id=b007.autorecd800&hl=en
Don't forget to give him some thanks and if you feel inclined to, some donation.
Just root your lollipop g2, here's an informative video on it https://www.youtube.com/watch?v=i22O9VHGi3k , then install Autorec from Playstore and then you'll get TWRP!
Click to expand...
Click to collapse
but how did you root stock lollipop
ankit360 said:
but how did you root stock lollipop
Click to expand...
Click to collapse
Same question how to root stock lollipop
ankit360 said:
but how did you root stock lollipop
Click to expand...
Click to collapse
Did you look at the video I linked?
Mustafa Jafri said:
Same question how to root stock lollipop
Click to expand...
Click to collapse
Watch the video bro.
Mustafa Jafri said:
Same question how to root stock lollipop
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951 it works . i did mine
ankit360 said:
http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951 it works . i did mine
Click to expand...
Click to collapse
am trying this method but when put in the last code its taken a while to do anything,so am wondering is it normal for it to take that long or am i doing something wrong?
When using one click ver 1.3 when it reaches 90% in download mode, wait a couple of mins then pull the usb cable out of phone while in download mode. You should reboot into Android upgrading SU !
Which rooting apps are u using?,is it for d800 variant?
yeah the OneClickRoot works. I was on KK 4.4.2, CloudyFlex 2.8 and decided to update to 5.0.2 just for the bootloader, modem and other stuff. So, I started backing up my "SD Card" to my laptop, using the TOT file method to flash via LG Flashtool to 20c, then rooting with TowelRoot, updating to 20y and finally, upgrading to 30f. But, just for testing, I factory reset my unit.
Then the quest to find a suitable root method began, tried towel, io and stomp but didn't work for me. Then I found this "OneClickRoot" that looked good. I d/l'ed v1.3 but it took forever in Download mode. Then, i decide to try v1.2 (Console version) and it worked PERFECTLY, highly recommended.
I just got this device (D800) with the intention of rooting and installing CM12. It came with the latest version of KK which I knew I had to downgrade to a version of JB with an unlocked boatloader. But my phone upgraded to Lollipop on its own before I had the chance to do anything. I assume the boatloader is still locked with the latest Lollipop firmware. It's nice there is a way to root Lollipop but will I be able to run CM12 and custom kernels somehow?
this is awesome, THANKS!
No go for me..
ZMaissi said:
yeah the OneClickRoot works. I was on KK 4.4.2, CloudyFlex 2.8 and decided to update to 5.0.2 just for the bootloader, modem and other stuff. So, I started backing up my "SD Card" to my laptop, using the TOT file method to flash via LG Flashtool to 20c, then rooting with TowelRoot, updating to 20y and finally, upgrading to 30f. But, just for testing, I factory reset my unit.
Then the quest to find a suitable root method began, tried towel, io and stomp but didn't work for me. Then I found this "OneClickRoot" that looked good. I d/l'ed v1.3 but it took forever in Download mode. Then, i decide to try v1.2 (Console version) and it worked PERFECTLY, highly recommended.
Click to expand...
Click to collapse
I always get stuck at Looking for LG serial Port...
any thoughts???
Finally..
It took me long time but finally I was able to go from 800D10D to 800D20c to 800D20y and 800D20F . Had to do lot of researching
and testing because I'm a noobie, but at the end it worked out. I thank all the developers and helpers.
---------- Post added at 02:31 PM ---------- Previous post was at 02:29 PM ----------
It took me long time but finally I was able to go from 800D10D to 800D20c to 800D20y and 800D20F . I'm rooted, TWRP installed and on Lollipop. Had to do lot of researching and testing because I'm a noobie, but at the end it worked out. I thank all the developers and helpers.
smilesintears77 said:
I always get stuck at Looking for LG serial Port...
any thoughts???
Click to expand...
Click to collapse
I'm guessing that you re referring rooting, right? In the console version, it says that you have to unplug the phone, turn it off and plug it again pressing Vol+ (Vol Up) to enter download mode.
After that, it will continue and eventually you'll get to something that says Special Command ENTER something,, then you have to press Ctrl-C to finish.
Hope this helps
Enviado desde mi LG-D800 mediante Tapatalk
I was using windows 7. I end up using windows 8 and it worked.
Sent from my LG-D800 using xda premium
Thanks for posting this guapinoy. I recently got a new AT&T G2 that I OTA updated to Lollipop (using an AT&T sim). I followed the picture tutorial linked to that youtube video (http://highonandroid.com/android-smartphones/how-to-root-lg-g-flex-2-g2-g3-on-lollipop/) and was able to root successfully. Installed TWRP afterwards using the autorec app.
I'm having problems with that recovery that this thing installed, it doesn't work for flashing, just for backups... Tried to install other recovery (philz and the official twrp) or rom (liquidsmooth) and i always get the message "error executing updater binary in zip "zip name" "....
Also installed the kitkat baseband, but the error was still there...
I got a boot loop now, at first the ROM worked without recovery, now the recovery works but the ROM won't boot. I can't flash anything due to the same erro .
Help!!!
Hi.. Everyone I'm new to the thread I flashed Blisspop 3.2 to my lg g2 and everytime I bootbit up I keep experience gapps error such as unfortunately google play services has stopped and I can't access anything without that error popping up my LG g2 is the AT&T model (D800) can someone please give me a copy of autorec d800 for lollipop so I can use to try flash twrp on the phone or will the old kit kat autorec work Please I'm in serious need
Is there a rooting method for MM? I've looked through the threads and it's all about the MM custom roms which I don't have. I'm using upgraded MM OS. I tried to downgrade to LP using the mobile Q and it stayed on MM and reset my phone to default ((lmao)). I'm not exactly a wiz, but decent enough at this but I love this phone and want to use it to it's full potential.
I'm on the cricket service using idol 5.5 ((model 6045i)) if it matters. If I missed a thread that I should have read, forgive me and just point me in that direction. Thx!
Happy rooting!
You may have to downgrade to stock lp first.
Look here: http://forum.xda-developers.com/idol-3/development/tool-tools-idol-3-5-5-4-7-t3441781
Re:
Hii Audit, thanks for replying!
I will try it, thx! Hope it works for me.
Ohkay, so nothing worked to downgrade MM to LP stock
Panasonic Eluga wasn't able to detect the device although I've installed drivers and reset the pc and phone. Nothing worked. The link you provided for me helps but didn't work for me to allow me to downgrade. But thx for taking the time out to help me! Any help is appreciated.
Ohkay, so nothing worked to downgrade MM to LP stock
Panasonic Eluga wasn't able to detect the device although I've installed drivers and reset the pc and phone. Nothing worked. The link you provided for me helps but didn't work for me to allow me to downgrade. But thx for taking the time out to help me! Any help is appreciated.
gamerlady96 said:
Ohkay, so nothing worked to downgrade MM to LP stock
Panasonic Eluga wasn't able to detect the device although I've installed drivers and reset the pc and phone. Nothing worked. The link you provided for me helps but didn't work for me to allow me to downgrade. But thx for taking the time out to help me! Any help is appreciated.
Click to expand...
Click to collapse
Did you put the phone in download mode by any chance?
If not, I believe it's Power + Up/Down volume at the same time.
I went ahead with the Panasonic Eluga software, took some work for it to detect my phone. But got it to downgrade to 5.0 and flashed the AlekOS ROM with no problems!
gamerlady96 said:
I went ahead with the Panasonic Eluga software, took some work for it to detect my phone. But got it to downgrade to 5.0 and flashed the AlekOS ROM with no problems!
Click to expand...
Click to collapse
I am also on stock MM on cricket idol 3. Will try the panasonic downgrade to 5.0. Did you also have to install the hybrid bootstack to get alekos to work or just the standard root/unlock bootloader then install rom ?
wogeboy said:
I am also on stock MM on cricket idol 3. Will try the panasonic downgrade to 5.0. Did you also have to install the hybrid bootstack to get alekos to work or just the standard root/unlock bootloader then install rom ?
Click to expand...
Click to collapse
When u flash a 6.x rom, u have to flash the hybrid bootstack after flashing a 6.x rom. it's was easier than I expected it.
gamerlady96 said:
When u flash a 6.x rom, u have to flash the hybrid bootstack after flashing a 6.x rom. it's was easier than I expected it.
Click to expand...
Click to collapse
cool thanks..
p.s. how did you enter download mode to flash Eluga 5.0? and if i can ever get these drivers to install...sheesh
wogeboy said:
cool thanks..
p.s. how did you enter download mode to flash Eluga 5.0? and if i can ever get these drivers to install...sheesh
Click to expand...
Click to collapse
lol yw! volume up&down and power button together, then you'll see just the idol logo.
gamerlady96 said:
lol yw! volume up&down and power button together, then you'll see just the idol logo.
Click to expand...
Click to collapse
I think im losing my mind.. cant get the driver to install. Tried several alcatel drivers but no go.
Just downloaded the adb alcatel drivers...will try those too.
Ill keep playing with it. thx for the download mode info
wogeboy said:
I think im losing my mind.. cant get the driver to install. Tried several alcatel drivers but no go.
Just downloaded the adb alcatel drivers...will try those too.
Ill keep playing with it. thx for the download mode info
Click to expand...
Click to collapse
oh no but yw, have you tried the USB debugging enabled under the dev option?
gamerlady96 said:
oh no but yw, have you tried the USB debugging enabled under the dev option?
Click to expand...
Click to collapse
I tried about everything... it sees it as CD Rom drive in windows but when I go to download mode it no longer sees it and the device disappears from my device manager... tried about every trick...
After about 15 or 20 other tries it finally stuck with a driver---which one I have mo idea ... I quickly shut off phone went into download (before it changed its mind) and loaded the panasonic OS. it installed !! I will play with it tomorrow and try and install Alek OS FLy.
Thanks again
gamerlady96 said:
When u flash a 6.x rom, u have to flash the hybrid bootstack after flashing a 6.x rom. it's was easier than I expected it.
Click to expand...
Click to collapse
thx..this worked for me too.
I also have a cricket 6045O and installed panasonic eluga. After I get alekOS/FlyOS installed do i need to install any cricket ( usa) modem to get 4g LTE? (i imagine the panasonic modem is not compatible or is the modem built into the new ROM)?
carlasan said:
thx..this worked for me too.
I also have a cricket 6045O and installed panasonic eluga. After I get alekOS/FlyOS installed do i need to install any cricket ( usa) modem to get 4g LTE? (i imagine the panasonic modem is not compatible or is the modem built into the new ROM)?
Click to expand...
Click to collapse
no I got LTE perfectly fine after I used the Panasonic method to downgrade to 5.0. It's usually the ROM that causes u to lose LTE . CM12.1 ROM by The Marionette is the best to use and guarantee to keep ur LTE speeds if nothing goes wrong during the flashing process ^.^ Plus its amazingly stabled and fast.
To get into download mode, press and hold volume up+volume down+power.
hi, I'm desperately looking for a method to root stock MM for the 6039 model... any idea?
Thank you so much
bouldou, I suggest to you try using the Panasonic Eluga Software to downgrade from MM to LP. As far as im concern, there's no way to root MM yet. Just make sure ur PC download ur alcatel's drivers before doing so.
wogeboy said:
cool thanks..
p.s. how did you enter download mode to flash Eluga 5.0? and if i can ever get these drivers to install...sheesh
Click to expand...
Click to collapse
I had trouble getting mobile q to detect my phone the first time, took about 10 tries putting it into different boot modes before it was finally properly detected.
Once you get it to work the first time, it'll work without even entering that download mode. Eluga is the same.
Sent from my 6045O using Tapatalk
Hi. I'm finally can root my SM-G920R6. I use the KingRoot.apk the v4.80 and root the phone. But it's not full root. Them I use the SuperSuMe.exe on my PC to remove all the KingRoot app and install the official SuperSu.apk The program install it's self. And now we can install the correct binary and reboot the device and don't lose root... ohh and my Knox still 0x0... =) XD:laugh: :victory: :highfive:
Links:
●KingRoot v4.80
●SuperSuMe. for PC
Sincerely I don't know if full root or not. But for me is working. And other things I don't know is full knox disabled. The SuperSuMe block the knox in one of the process but I don't know if is disabled at all or not.
I wish this can't help all the SM-G920R6 user. And don't want to avoid the knox warranty.
The only thing you can see is every time you BootUp your phone it say Custom.
The next thing I'm going to do is make a full backup with FlashFire app because mi firmware not appear in SamMoblie. If one Dev can make something with this backup for make custom roms or something good for this devices model.
my phone info:
Android Version : 5.0.2
Baseband : G920R6WWU1AOE4
Build Number : LRX22G.G920R6WWU1AOE4
Hardware Version : G920R6.02
I'm not a good English speaker so I apologize my errors..
P.S.
Sorry I'm not a Dev. this is my first Thread and I do this for helping.
This is a little off topic for the op but I really need help right now.. I rooted with CF autoroot for G920F no problem then installed TWRP 3.0.2-1 zeroflteusc also built for G920F model and in the process of trying to find a better rom as soon as I had a custom recovery, me (being a dumba**) accidentally wiped my internal storage to do a clean flash of a rom therefore deleting the only backup I had. I've only been able to find the factory binary for this device which I flashed but it had literally nothing exept for basic testing software and a simple ui to run it. It was also stuck on Android 5.0.2 but I found a compatible rom with AllianceROM v1 with update v2 flashed for the G920F but I can't find any way to update past 5.0.2!! I've been trying to find a way to update somehow for weeks but nothing is compatible with my device and I'm stuck. Would someone that has my model running on Android 5.1.1 or 6.0/.1 please install the TWRP I mentioned before and make a backup of the system, modem, efs, and boot and post it online or send it to me it would be a lot of help.
Reasons I hate you I guess ?
You are a real piece of **** and a cancer to those with A ACTUAL SAMSUNG-SMG920V.
I don't even know why you posted this here you don't even have a SM G920R6.
Seriously you just made me give up hope once again on getting root on my SAMSUNG-SMG920 on android 6.0.1 :crying:
Sincerely yours ( Another piece of **** with this **** tastic phone that dies in 3 hours and you can do jack **** with)
P.s. It also dies in 3 hours no matter what I install on it no matter on many resource manager apps I use, it just ****ing dies.
P.s.s. Sorry for swearing so much...
hoppits said:
You are a real piece of **** and a cancer to those with A ACTUAL SAMSUNG-SMG920V.
I don't even know why you posted this here you don't even have a SM G920R6.
Seriously you just made me give up hope once again on getting root on my SAMSUNG-SMG920 on android 6.0.1 :crying:
Sincerely yours ( Another piece of **** with this **** tastic phone that dies in 3 hours and you can do jack **** with)
P.s. It also dies in 3 hours no matter what I install on it no matter on many resource manager apps I use, it just ****ing dies.
P.s.s. Sorry for swearing so much...
Click to expand...
Click to collapse
Because my device is G920R6 originally and i want it back the 920F rom is barely compatible with my device as is and i want a stable rom made for my build and also to enlighten others of how i rooted this phone and what custom recovery is working for me. Even on 5.0.2 and an unstable rom my battery lasts 6+ hours of constant use so root is working fine for me.
So much hate.
yeah i see now this model phone is the ugly duck....
But some one have the factory firmware of this model flashable with odin. Thanks a lot.
Casper1619 said:
This is a little off topic for the op but I really need help right now.. I rooted with CF autoroot for G920F no problem then installed TWRP 3.0.2-1 zeroflteusc also built for G920F model and in the process of trying to find a better rom as soon as I had a custom recovery, me (being a dumba**) accidentally wiped my internal storage to do a clean flash of a rom therefore deleting the only backup I had. I've only been able to find the factory binary for this device which I flashed but it had literally nothing exept for basic testing software and a simple ui to run it. It was also stuck on Android 5.0.2 but I found a compatible rom with AllianceROM v1 with update v2 flashed for the G920F but I can't find any way to update past 5.0.2!! I've been trying to find a way to update somehow for weeks but nothing is compatible with my device and I'm stuck. Would someone that has my model running on Android 5.1.1 or 6.0/.1 please install the TWRP I mentioned before and make a backup of the system, modem, efs, and boot and post it online or send it to me it would be a lot of help.
Click to expand...
Click to collapse
Hi. i found a factory SM-G920R6 Android 6.0.1 frimware... but this android version I'm rooted with the same cf auto root you used .
And I don't know remember were i downloaded the firmware.. But later I try to uploaded.
M3RS3 said:
Hi. i found a factory SM-G920R6 Android 6.0.1 frimware... but this android version I'm rooted with the same cf auto root you used .
And I don't know remember were i downloaded the firmware.. But later I try to uploaded.
Click to expand...
Click to collapse
Could you install the twrp recovery I mentioned and make a backup of the system and boot and post that?
Casper1619 said:
Could you install the twrp recovery I mentioned and make a backup of the system and boot and post that?
Click to expand...
Click to collapse
yeap.. but when I install the recovery the phone gave a glitch.. its flipping the touch response inverted.. and the only fix is with root. and use the app. phone info.apk for Samsung and use the secret code with root because it is blocked on the dialer.
but i have the backup for the new firmware. not the android 5.0.2
M3RS3 said:
yeap.. but when I install the recovery the phone gave a glitch.. its flipping the touch response inverted.. and the only fix is with root. and use the app. phone info.apk for Samsung and use the secret code with root because it is blocked on the dialer.
but i have the backup for the new firmware. not the android 5.0.2
Click to expand...
Click to collapse
That's exectly what I need I'm stuck on 5.0.2 and I want to upgrade back to 6.0.1 it's mainly the bootloader I need because no other marshmallow bootloaders work for this phone and the one I have is only for 5.0.2
Casper1619 said:
That's exectly what I need I'm stuck on 5.0.2 and I want to upgrade back to 6.0.1 it's mainly the bootloader I need because no other marshmallow bootloaders work for this phone and the one I have is only for 5.0.2
Click to expand...
Click to collapse
But i have the stock firmware flashable with odin. you have my same phone. SM-G920R6?
M3RS3 said:
But i have the stock firmware flashable with odin. you have my same phone. SM-G920R6?
Click to expand...
Click to collapse
Yeah if you could send it to me that would be awesome
Casper1619 said:
Yeah if you could send it to me that would be awesome
Click to expand...
Click to collapse
you can download send anywhere app in playstore and i cand send directly to you.
.....
ohhh let me check if i haved in the phone because i give my pc to one cousin to make some homework. and i dont haved right now.
M3RS3 said:
you can download send anywhere app in playstore and i cand send directly to you.
Click to expand...
Click to collapse
Alright I've got work then I'll be back
Casper1619 said:
Alright I've got it ready whenever you are
Click to expand...
Click to collapse
Give me some minute to go to my cousin house.. is near of my house to get the file and copy on my pendrive..
Casper1619
Sorry i go to uplode the two file. the BACKUP and the Stock Firmware 6.0.1 in MEGA and then i post the two links.. I promes... because the internet it come extremely slow... when i uploded the two file i posted ok...
M3RS3 said:
Sorry i go to uplode the two file. the BACKUP and the Stock Firmware 6.0.1 in MEGA and then i post the two links.. I promes... because the internet it come extremely slow... when i uploded the two file i posted ok...
Click to expand...
Click to collapse
Okay how long do you think it'll be?
Casper1619 said:
Okay how long do you think it'll be?
Click to expand...
Click to collapse
i don't know maybe for tomorrow.. have a good night.:good:
M3RS3 said:
i don't know maybe for tomorrow.. have a good night.:good:
Click to expand...
Click to collapse
Okay thanks you too