Every time I activate any of the features/processors in Noozxoide, I can hear a slight static buzzing noise in the background of any music. When I turn off the features, the buzzing goes away. Is this normal, and if not, how can I stop it? I've tried listening to my music with Poweramp, Neutron, noozy, and jetAudio. My device is a Verizon SGSIII running the latest version of PACMAN ROM. My kernel is the latest release of KT747. I have done some undervolting and overclocking using KTweaker. I also have Ac!d Audio Mod v5 (the Samsung optimized version) installed. I have good headphones (Audio Technica ATH-M50s), so I don't think it's a hardware issue. Any and all help is appreciated.
Problem resolved, this post can be deleted.
May I ask how you resolved the issue? I have the exact same scenario going on with my sgs3 as well - I'm on a different ROM/Kernel, but same base issue. Thanks!
Hi,
this is my first thread and I already searched everywhere to get my problem solved. Unfortunately without successso far...
Whatever soundmod I am using, the sound does not change at all on my HTC One XL (evita) with AOKP milestone 2.
First, I tried Viper4Android, installed everything, chose V4A in the sound settings, enabled V4A, chose different IRS files, but whatever I do,
the sound does not change at all, no matter how I change the program's settings. I followed all the installation instructions carefully,
so the program should work fine.
After removing V4A, I tried Noozxoide, installed it, chose it in the settings and enabled it. But there is also no effect on the sound quality at all,
no matter how I adjust the settings in the app.
Lastly, I downloaded some other DSP/equalizer programs like Music Equalizer, but there is no change in the sound when I adjust effects and
settings (enabling, disabling the program does not change anything, all equalizer pre-sets sound identical, extra bass has no effect etc.).
As I use my phone for listening music every day, the sound quality is quite important for me and compared to the Sense with Beats Audio it is
really much much worse.
The sound quality is the only downside compared to the stock rom for me, otherwise I am very happy with AOKP and the rom works very fine.
Does anyone know where the problem might be?
Are there any soundfilters in AOKP that prevent sound mods to work properly?
Any other HTC/AOKP users that have/had similar problems?
Thanks a lot in advance..!
I recently received my OPO and loaded V4A on it done the BT output is low, similar to my N5.
I've found that you seemingly can't change the EQ under Sound -> Music Settings like on the N5. I saw mention of the DSP Manager apk and freezing it, but I don't see one under /system/app/ or /system/app-priv/
Am I missing something support obvious, or can you just not change the Music Effects on CM11S?
I'd rather not have to flash another ROM since I'm quite happy with everything else for the most part.
Sent from my Nexus 7 using Tapatalk
DSP Manager is not included in 11S. Its AudioFX in 11S.
Viper4android works fine.
Working just fine here OP.
BT, Headphones and Speaker are working great.
I used to use Viper4Android for about a week but after flashing volume boost mod which in this link OMG! I uninstall Viper4android and just sticked to the Mod that I flashed along with the stock AudioFX And the Sound now on my OPO is Blazin [emoji106] take it from someone who can't listen to his music unless it's Super clear n bassy too [emoji4]
http://forum.xda-developers.com/showthread.php?t=2835010
http://forum.xda-developers.com/android/software/app-divinebeats-sound-master-phone-sony-t3274355
above link is to a audio mod with both V4A and Dolby atmos, by TheRoyalSeeker
It is not my work i am just sharing it here coz it may work in our roms as it already works in mine.
I have tried it on my phone,
ROM skydragon 6.01
it works except for the sony sound settings,
also if it works on any other rom please post the status
share the joy :highfive:
I hope working with CM13
What do you mean that is working but not the sony settings? So just the viper audio settings? Cause viper4android was already working
MariocolaAnyPark said:
What do you mean that is working but not the sony settings? So just the viper audio settings? Cause viper4android was already working
Click to expand...
Click to collapse
viper4android , dolby atmos, dolby digital, all these work, visit the post, more options are there
Divine Equalizer not working cm13-MM and Music also
Divine Equalizer not working cm13-MM and Music also not working
vinu.gwen said:
Divine Equalizer not working cm13-MM and Music also not working
Click to expand...
Click to collapse
yeah but dolby and v4a works right, im gonna try for cynapop will update post then
Everyone know Dolby and v4a working in CM13.
Flashed this mod with DD+ and it made everything sound garbled without even turning the mods on. All apps seem to work, including Sony player but results are horrible, something is broken there.
Oxygen OS 2.2.0 with Boeffla kernel
Edit: even bigger disappointment is finding out that V4A does not work on OOS. Damn!
Sent from my ONE A2003 using Tapatalk
I have tried this one three different custom CM13's so far and the Divine Equalizer has worked on none of them. I can get V4A working, but only if I install it using the "LoliViper" ZIP. Is there a fix OP or am I just screwed?
@Rub It is maybe you need to change selinux to permissive instead of enforcing?
Dac0908 said:
Flashed this mod with DD+ and it made everything sound garbled without even turning the mods on. All apps seem to work, including Sony player but results are horrible, something is broken there.
Oxygen OS 2.2.0 with Boeffla kernel
Edit: even bigger disappointment is finding out that V4A does not work on OOS. Damn!
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
working on oos 3.0...
Will this work on H2OS?
raghu0421 said:
working on oos 3.0...
Click to expand...
Click to collapse
Just tried it on CyanOxy and yes, short answer would be that it works but results aren't so impressive. Distortions creep in, while bass was lacking before this now is overblown and I can't find a way to tone it down effectively. V4A is hidden somewhere in there but installing regular app doesn't seem to work for adjusting, parallel to that there is so much sound processing that it is insane. Divine eq doesn't respond, two music players also fall apart when skipping songs. Not good. Maybe on some other phone or ROM... so for now, nandroid back and use just clean V4A. Although even that worked better on CM13
New v7.00 seems to work, and also has new approach - base zip with addons and/or apps separately :good:
Nope. Bluetooth is gone after flashing. Sound seems to be better than before flashing it, but with V4A turned off. Turning it on just ruins everything, so there is again too much processing out of users control.
Dolby Atmos is only other visible app and it just has to be turned off or crackling and distortions go over everything
Also volume control is broken, full volume is about on half of the scale, with horrible distortions, then it tones down and going louder again, only with more horrible distortions. Ugh.
Sent from my ONE A2003 using Tapatalk
Any way (.zip) to uninstall the Viper ?
Its pain in $$a to restore the ROM from TWRP
Viper is no problem but all other libs and changes are impossible to remove. Always backup before flashing this kind of stuff, then restore takes only a minute
Razor64 said:
Will this work on H2OS?
Click to expand...
Click to collapse
I'm running H2OS 6.0.1 (V1.4.0) Firmware Version ONE A2005_24_160513 and it's working for me.
All I did was set SELinuxMod to Permissive using the SELinuxModeChanger app and used the Dolby Atmos Remover zip to remove DA mod. Working great with my headphones but haven't tried bluetooth audio yet, which is when I use my phone for music most...
Backup data first!
worst thing to flash. broke both my speaker and headphones. worst sound mod ever madhe.
Yup.
Problem with bad audio was on first OOS3 beta and later it was fixed, and with Dirac HD (whatever that is, sound is ok) on final OOS or V4A (which still plays funny with bluetooth, needs user fixing) - I don't see the point of these mods. They just create more problems, and do sound processing without any user control and cannot be turned off. That is just nasty.
Anyway, it is impossible to make it sound better with some software mods, it is just an illusion. We need better hardware, better DAC, better amplifier to really get better sound. Using OTG, or maybe just in-line headphone amp from FiiO or something similar. Short of that, V4A is more than enough for some tweaks.
Hi all.
I have an issue when I record a video with the default app on my Moto Z2 Play. I tried every mode, and on all no have audio. If I record audio with a recording audio app from Play Store, it works.
My phone is rooted and have the stock Oreo version (8.0.0). Also I installed Viper4Arise (Numbers 3.5). I not know if this caused the problem.
Regards.
Confirmed!
Viper4Arise was the problem. I restored a previous version of system image by TWRP Recovery and the problem solves. I installed Viper4Android FX Materialized v1.1 (2.6.0.5) using Magisk Manager and it works. Driver installed, audio prossesing: yes, and video recording with audio using default app.
Regards.
Now I updated to the last version (1.8.1) using downloads section of Magisk and works better with my V2A profiles.
But sometimes after reboot, V4A keeps with no processing. Probably I need to wait for finish the reboot completly before connect my headphones. I need to investigate it, jeje.
Regards.
Well, for some reason, in PowerAMP, the Direct Volume Control feature was enabled, I remember that I disabled it, but, well... Apparently now works normally, I will test it for some days.
Regards.
After few days, all it's OK.
Solved.
Regards.