[Q] Deleted CM11 from OPO - ONE Q&A, Help & Troubleshooting

Accidentally I had deleted/wiped CM11 ROM from OPO. Now I can only boot in TWRP 2.7.1.0 but cannot load ROM from UTG or via MTP.
TWRP doesn't recognize the files located on USB. Windows 8 can detect USB as nexus 7 in driver on USB connection but cannot update driver hence not showing in 'My Computer' and unable to transfer any ROM to Phone. Is there any way to restore phone?
Pl. help me.

Put the phone in fastboot mode and flash the stock images. See section 8 of my guide thread for instructions. And once you're up and running, sort out your drivers so you're not in this situation again. You'll find the right driver for our device here.

Related

[Q] USB recognizing / unbricking problem

Hello,
I've got a Galaxy Note 10.1 (N8020). First, I have flashed 4.4.2 via Mobile ODIN, then I noticed, that the Wi-Fi didn't work, so tried reinstall Jelly Bean. I used Mobile ODIN because my pc and laptop didn't recognize the USB. Why?
Now, I've got bootloop. I can't connect to PC with download mode, it don't recognize. It's very annoying.
What could be the problem? The USB cable? Its the original cable that came with the tablet.
What can I do? I can enter the stock recovery, and download mode.
I can only go to stock recovery, I can't flash Philz cwm.
If there's a root zip that i can install in stock recovery, I would be happy.
Please help, my family will kill me :laugh:
Thanks
Do you have the driver installed for the Note 10.1 on your computer? If not, you can get it by installer Kies (you don't need to use Kies, you just need it for the driver).
Yes, its installed.
Now I can boot, but I lost all my data.
But I still can't connect to PC.
Why?!

[q] [help] bootlop, usb not working

HELLO. I was running android 5.0 on my moto g, but then i downgraded to 4.4, miui v5. But I couldn't root it and couldn't also go to cwm. So I decided to flash the stock firmware using fastboot. But when it was done, the phone got a bootlop and now, when i connect it to the pc, the device isn't recognised. = pc knows, that it is connected, but cannot recognise it. And the device doesn't recognise anything. Any solutions?

[Completed] Lenovo Not Turning ON but Detected by PC (Failed Flashing Stock ROM via SPFlashtool)

My Lenovo A3500 is no turning on after flashing the stock rom via sp flashtools, it didn't flash completely, it failed before downloading. I accidentally closed the error box (which tells me where the log file is).
So before this happened, I successfully flashed the stock rom for my tablet, then I decided to flash cwm recovery (I found a compatible version), Then I tried flashing the cwm recovery via spflashtool but it tells me that "PMT changed for the rom. It must be downloaded". So I decided to reinstall the stock rom with the CWM recovery. So I selected the scatter file for the stock rom and I just changed the path of the recovery to the CWM recovery, when I clicked download and connected my powered off device, It showed an error that it cant be completed (I forgot what it is, it told me there's a log file) Now my tablet doesnt start after pressing the power button, cant access anything on the tablet but when I connect it to my computer, my computer plays the sound that it found a device so that means my tablet is detected. I tried adb devices but it shows nothing. I tried flashing the stock rom again via sp flashtool but when I click download and plug in the phone the download is not starting meaning it cant detect my tablet.
So for short:
my lenovo a3500 tablet doesnt turn on after flashing stock rom, it is detected by pc (plays sound) but cant be detected by adb. It cant be detected by sp flashtool.
please help, youre my last hope pls m8s
XDA Visitor said:
My Lenovo A3500 is no turning on after flashing the stock rom via sp flashtools, it didn't flash completely, it failed before downloading. I accidentally closed the error box (which tells me where the log file is).
So before this happened, I successfully flashed the stock rom for my tablet, then I decided to flash cwm recovery (I found a compatible version), Then I tried flashing the cwm recovery via spflashtool but it tells me that "PMT changed for the rom. It must be downloaded". So I decided to reinstall the stock rom with the CWM recovery. So I selected the scatter file for the stock rom and I just changed the path of the recovery to the CWM recovery, when I clicked download and connected my powered off device, It showed an error that it cant be completed (I forgot what it is, it told me there's a log file) Now my tablet doesnt start after pressing the power button, cant access anything on the tablet but when I connect it to my computer, my computer plays the sound that it found a device so that means my tablet is detected. I tried adb devices but it shows nothing. I tried flashing the stock rom again via sp flashtool but when I click download and plug in the phone the download is not starting meaning it cant detect my tablet.
So for short:
my lenovo a3500 tablet doesnt turn on after flashing stock rom, it is detected by pc (plays sound) but cant be detected by adb. It cant be detected by sp flashtool.
please help, youre my last hope pls m8s
Click to expand...
Click to collapse
Welcome to XDA Developers.
First, please register as a user, here > http://forum.xda-developers.com/register.php
After you have registered, I would suggest that you post your question in the following forum and one of our experts will help you > http://forum.xda-developers.com/showthread.php?t=2259645
Good luck

Bricked after flashing TWRP in Android

I have a GT SGH-i497 from AT&T. I rooted and flashed CWM recovery and CF-Auto-Root-espresso10att-espresso10uc-samsungsghi497.tar.md5 ROM. Everything was working great. Then I decided to flash TWRP recovery via TWRP Android app and not thru recovery, just to check TWRP out. Now tablet will not boot. PC would recognize it in device manager as QHSUSB_DLOAD. I then attempted to push the custom ROM and TWRP to SD card on tablet via ADB/ Fastboot. After doing so the tablet still does not boot and now my PC chimes when I connect the tablet, but in device manager it now says it is unknown. If I hold the power button while connected the PC chimes off and on. I have searched all forums all the way back to 2012, and I have not found any help. Does anyone here know what I can do to get my tablet back? Any and all help is appreciated. Thanks......:good:
Mr_Mxyzptlk said:
I have a GT SGH-i497 from AT&T. I rooted and flashed CWM recovery and CF-Auto-Root-espresso10att-espresso10uc-samsungsghi497.tar.md5 ROM. Everything was working great. Then I decided to flash TWRP recovery via TWRP Android app and not thru recovery, just to check TWRP out. Now tablet will not boot. PC would recognize it in device manager as QHSUSB_DLOAD. I then attempted to push the custom ROM and TWRP to SD card on tablet via ADB/ Fastboot. After doing so the tablet still does not boot and now my PC chimes when I connect the tablet, but in device manager it now says it is unknown. If I hold the power button while connected the PC chimes off and on. I have searched all forums all the way back to 2012, and I have not found any help. Does anyone here know what I can do to get my tablet back? Any and all help is appreciated. Thanks......:good:
Click to expand...
Click to collapse
try with odin and stock firmware
sergio_f said:
try with odin and stock firmware
Click to expand...
Click to collapse
Odin does not recognize the tablet.
ave you installed the drivers??
search for usbdeview, uninstall the drivers of the tablet or all drivers.. then install drivers again
sergio_f said:
ave you installed the drivers??
search for usbdeview, uninstall the drivers of the tablet or all drivers.. then install drivers again
Click to expand...
Click to collapse
Yes, in my initial post I stated that I pushed ROM and TWRP to tablet sdcard via ADB/ Fastboot, I read they install with the android drivers. But I will try the uninstall and search for the usbeview. Thanks for help I will post my findings/ results later this evening. :good:
odin recognize tablet if you boot it in download mode
power & vol buttons
regards
sergio_f said:
ave you installed the drivers??
search for usbdeview, uninstall the drivers of the tablet or all drivers.. then install drivers again
Click to expand...
Click to collapse
usbdeview worked to the driver status. I installed the QHSUSB_DLOAD drivers on PC and the PC now recognizes tablet when connected. Does anyone know where I can download the debrick image for the galaxy tab 2 10.1 AT&T model? Thanks
Mr_Mxyzptlk said:
usbdeview worked to the driver status. I installed the QHSUSB_DLOAD drivers on PC and the PC now recognizes tablet when connected. Does anyone know where I can download the debrick image for the galaxy tab 2 10.1 AT&T model? Thanks
Click to expand...
Click to collapse
There is none available, in my thread I asked the community to share from their working tabs. I haven't got any. Plus nobody has tried that method. It works or is it just a theory? we still don't know.

Infinix note 3 X601 problem

Hello guys,
I have an old phone Infinix note 3 X601 which I haven't used since years, I got it out today and after turning it on I did a reset factory, and after the reset factory was done the phone won't bootup anymore when I turn it on it goes to the boot loader screen and give me this message at the bottom "[!] Data couldn't be decrypted and mounted. Please restart recovery from Power Menu" and when I press restart recovery nothing happens it go back to the same screen, but this is not the official boot loader because back then when I was using it I rooted it and installed Carliv Touch Recovery boatload instead of the official and also I had a custom Rom installed.
Can someone help me, please ?
Also, I tried to flash another rom but when I open SP flash tool it seems that it isn't detecting the phone no matter what I do, tried to install media tek driver auto installer and CDC drivers but nothing happened
I'm using windows 10 latest update
attached a photo of the screen I get when I turn on the phone
thanks in advance.
Have installed latest USB drivers?
Download Infinix USB Driver for Windows (Latest Driver)
Download the latest and original Infinix USB Driver to connect any Infinix Smartphone and Tablets to the Windows Computer quickly.
androidmtk.com
jwoegerbauer said:
Have installed latest USB drivers?
Download Infinix USB Driver for Windows (Latest Driver)
Download the latest and original Infinix USB Driver to connect any Infinix Smartphone and Tablets to the Windows Computer quickly.
androidmtk.com
Click to expand...
Click to collapse
yes I did but still not working
ahmwwd said:
Hello guys,
I have an old phone Infinix note 3 X601 which I haven't used since years, I got it out today and after turning it on I did a reset factory, and after the reset factory was done the phone won't bootup anymore when I turn it on it goes to the boot loader screen and give me this message at the bottom "[!] Data couldn't be decrypted and mounted. Please restart recovery from Power Menu" and when I press restart recovery nothing happens it go back to the same screen, but this is not the official boot loader because back then when I was using it I rooted it and installed Carliv Touch Recovery boatload instead of the official and also I had a custom Rom installed.
Can someone help me, please ?
Also, I tried to flash another rom but when I open SP flash tool it seems that it isn't detecting the phone no matter what I do, tried to install media tek driver auto installer and CDC drivers but nothing happened
I'm using windows 10 latest update
attached a photo of the screen I get when I turn on the phone
thanks in advance.
Click to expand...
Click to collapse
Flash it using SP flash tool
mvikrant97 said:
Flash it using SP flash tool
Click to expand...
Click to collapse
I'm using SP flash tool but the tool doesn't recognize that the phone is connected to the pc
ahmwwd said:
I'm using SP flash tool but the tool doesn't recognize that the phone is connected to the pc
Click to expand...
Click to collapse
Please setup MTK drivers first and add filter using lib usb.

Categories

Resources