Related
I had a Vibrant before and flashed it constantly. I soft bricked it several time and it was easy just to Odin back to stock and try again. Before I begin to flash Roms on this phone I would like to know how one would fix a bricked Nexus S. I searched "bricked Nexus S" and didn't come up with much.
Sent from my Nexus S using XDA App
Flash a stock img thru fastboot/adb. Just as painless as Odin was if not easier.
Sent from my Nexus S
Yeah I figured that much but I have never used ADB before. What are the commands to flash a stock img and where can I get a stock img? I already have ADB set up, serial # comes up when I enter - adb devices. I'm ready to root and flash but I want to be prepared for anything. I don't want to panic for ten minutes like I did the first time I bricked my Vibrant.
Sent from my Nexus S using XDA App
You should be able to snag a stock image from the development section. As far as what adb commands to use check out any of the root tutorials in development.
Sent from my Nexus S
bricking the phone is not easy... everything can be wiped and reinstalled with ease. Recovery is your friend.
leyvatron said:
bricking the phone is not easy... everything can be wiped and reinstalled with ease. Recovery is your friend.
Click to expand...
Click to collapse
That's why I love this phone. When I first rooted my wife's phone she was a nervous wreck about me ruining it. Now, she jokingly cheers when it boot loops or hangs on the google splash screen.
kenvan19 said:
That's why I love this phone. When I first rooted my wife's phone she was a nervous wreck about me ruining it. Now, she jokingly cheers when it boot loops or hangs on the google splash screen.
Click to expand...
Click to collapse
Coolest wife ever? haha
risegeek said:
Coolest wife ever? haha
Click to expand...
Click to collapse
hehe why'd'ya think I married her
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Van_Dyke said:
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Click to expand...
Click to collapse
not enough information is present. you can attempt to get into bootloader / recovery, plug USB to the computer. When plugged, does the computer make a plugged in noise? if it does.. try turning it on, try using adb on it, etc.
as a last resort: if its not rooted or modified in any way, you can go back to best buy and exchange it since you said you've only had it for 3 days
Van_Dyke said:
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Click to expand...
Click to collapse
First thing to do is pull the battery, let it sit a minute or two, then put the battery back in and try to boot.
Also, try booting into recovery or fastboot. With power off, press and hold volume up button, then press/hold power on switch. You should enter fastboot mode. From fastboot menu, select boot to recovery. The phone will reboot and you'll get to a screen with an "!" and an android robot on it. At that point you press hold power, then press/hold volume up (make note that this is the reverse of what you did earlier).
Once in Recovery, try wiping cache from the menu.
Reboot.
If still no good, then repeat the process but pick factory reset/wipe from the menu in recovery. Note that this will wipe all personal data and apps off the phone but it won't touch your sdcard contents.
The case with pull battery - not working.
I can't enter fastmode using 2 keys combination.
Computer don't recognize the phone. It's brick...
Van_Dyke said:
The case with pull battery - not working.
I can't enter fastmode using 2 keys combination.
Computer don't recognize the phone. It's brick...
Click to expand...
Click to collapse
Last option is to try to trick it into Samsung's Download Mode (see the Odin thread in Development section), but if the keys aren't recognized you can't soft boot into it so you'll need a dongle with a resistor to get there.
Sounds like it's truly a brick at this point. You'll probably have to return it, but I'm concerned about returning a phone that has your personal data on it without being able to wipe it. Doesn't seem like much way around that at this point if you can't get fastboot or download.
get the 301k resistor JIG and then you can go into the download mode even without the 2 keys + usb plug
you can always make your own JIG if you have the materials at home or a nearby Radio shack
Thx for all Your advices
Problem was with the dead battery. The battery died during the night - i don't know why. I think the system waren't able to boot up ant start charging process.
My solution:
I took 9V battery, 2 wires and charged dead battery for a while from 9V battery. Then a put it into phone and plug in to wall charger. Charging process started
Now everything is ok
That's pretty scary that it wouldnt take a charge if run down completelty. But hey handy to know incase it happens to any of us,
If you get any repeat i would take it back to get a fresh battery of course (only right to do so).
here's hoping you never need to though
Van_Dyke said:
Thx for all Your advices
Problem was with the dead battery. The battery died during the night - i don't know why. I think the system waren't able to boot up ant start charging process.
My solution:
I took 9V battery, 2 wires and charged dead battery for a while from 9V battery. Then a put it into phone and plug in to wall charger. Charging process started
Now everything is ok
Click to expand...
Click to collapse
That is scary......
Sent from my Nexus S using XDA App
Bricked
Tried unlocking nexus s last night, now it appears bricked. Cannot connect to computer to reflash as it seems to have wiped the driver. Any ideas on how to bring it back from the dead? thanks
I have managed to see the phone with fastboot. I was hoping that fastboot update, would re-image the brick. Can anyone let me know the correct syntax. I am not able to copy an image onto the phone. Thanks again
Noob {MAC User}... Please be gentle
Greetings Everyone,
Okay, so I endeavoured to root my phone last night and was successful. I ran into trouble when the clockwork recovery and superuser permissions kept getting removed each time I reboot.
Now, I'm at the Google splash screen with no way to move forward. I'm a mac user and I don't really get the adb thing. Got adb to work with mac from a youtube video, but still not sure what commands to run.
What I've done so far:
- wiped cache
- wiped/factory data reset
- retraced my steps by using terminal to setup superuser permission from this post (http://forum.xda-developers.com/showthread.php?t=927838)
What I think:
- maybe in all of my clicks I removed the ROM, so the phone doesn't have a ROM to work with.
This maybe a really infantile conclusion, but I know there's a solution (had a rooted G1 that I flashed all the time and thought I bricked once but was able to get it back to stock).
Eagerly waiting for a reply... no cell phone if this can't be fixed.
Tamara
warrenb said:
Tried unlocking nexus s last night, now it appears bricked. Cannot connect to computer to reflash as it seems to have wiped the driver. Any ideas on how to bring it back from the dead? thanks
I have managed to see the phone with fastboot. I was hoping that fastboot update, would re-image the brick. Can anyone let me know the correct syntax. I am not able to copy an image onto the phone. Thanks again
Click to expand...
Click to collapse
It would be easier to help you if we knew exactly what you did that caused the problem. You said you tried to unlock it...you mean fastboot oem unlock or something else?
If you can get into fastboot, you're not totally lost, but the computer needs to see the phone to do it.
I'm working in a vacuum here on what your real problem is, but without further details, the things you can try are boot into recovery (from the fastboot mode select boot recovery)...if you're stock recovery, press/hold power, then volume up once you see the android "!". From there wipe cache and whatever else it will let you wipe. Try rebooting. IF that didn't work go back to recovery and try a factory reset of the phone (will delete all your apps and stuff on the phone, but not on the sdcard (pics and stuff).
If none of that works, you can still try getting Clockwork recovery on the phone via fastboot. Boot phone to fastboot and then on computer type the command "fastboot flash recovery <put file name of recovery version you're flashing here>"
Once in clockwork, you should have access to adb via the computer. On your computer go to the Development section here and download any of the various nandroid images posted there. Now you use clockwork mounts and storage menu to mount the sdcard. Then use adb to "adb push <insert path and filename of your nandroid image here> /sdcard"
Unmount the sdcard with the clockwork mounts and storage menu. Now go to the backup menu, select advanced restore and find the nandroid image and restore it.
With any luck, you should be able to boot into a fresh phone.
After flashing a nightly of CM10.2, my phone never booted and instead got stuck in fastboot. My power button has also been broken for months, so it's impossible to navigate the menus in the fastboot ui. When I take my battery out, it automatically boots into fastboot on its own.
Additionally, I found a way to boot into recovery without a power button, but the device is not being recognized as plugged in by my computer.
Any help??? It'd be greatly appreciated, I'm without a phone until I can find a way to fix this.
sinaisinai43 said:
After flashing a nightly of CM10.2, my phone never booted and instead got stuck in fastboot. My power button has also been broken for months, so it's impossible to navigate the menus in the fastboot ui. When I take my battery out, it automatically boots into fastboot on its own.
Additionally, I found a way to boot into recovery without a power button, but the device is not being recognized as plugged in by my computer.
Any help??? It'd be greatly appreciated, I'm without a phone until I can find a way to fix this.
Click to expand...
Click to collapse
I'm having the same exact issue, except with SlimBean 4.3. My phone is stuck in Fastboot (and says "FASTBOOT - NO BOOT OR RECOVERY IMG") and my phone will charge but can't be detected by *any* computer. I've tried three Windows 7 PCs of different makes and an Ubuntu 13.04 box and three different USB cables that all connect my other phone and my tablet fine - none can see it. (It was connecting fine to PC including being seen by ADB prior to this)
My power button is working, but it is also automatically booting into fastboot on its own when I plug it into the computer. Any of the options (besides "Power Off", which performs as advertised) just brings it back to Fastboot.
When I say can't be detected by a computer, I mean there is no USBDeview device listed and there is no 'connect' or 'disconnect' sound on the PC. ADB can't see it.
Yeah, it's strange. Did you find a solution yet, by chance?
sinaisinai43 said:
Yeah, it's strange. Did you find a solution yet, by chance?
Click to expand...
Click to collapse
Nothing yet. Thinking of buying an phone with a busted screen or something and swapping out the internals... I think it's PROBABLY the NAND chip. What I'm suspecting is that because there are several versions of the Nexus S, we might have used the wrong images. I have no idea if this is correct, but it's the only thing I can think of.
My phone's sticker says i9020 on the inside, but D720 (or whatever) when I look up the EIN.
Just hoping somebody sees this and offers a suggestion... I'm getting ready to buy a refurb and put the 'new' body over it so at least I have a functioning, new-ish phone.
Hey guys. I'm kinda desperated so let's see if there is anything else I can do.
I was playing a game on my phone and it started rebooting alone.
At this point, I long pressed the power button, don't ask me why, but I did it. and bang. it is dead. No boot, no loading, nothing. It still vibrates when I try to turn it on.
I had 30% Battery left.
I have root and my phone for 3 months.
I had Nandroid backup.
Long press power button, volume up + power, volume down + power doesn't work.
When connected to PC, I get the QHSUSB_BULK device on.
Tried to ColorOS Method but:
I cannot install ColorOS drivers cause it doesn't detect them.
I tried Qualcomm drivers and they worked, so then I used the program Msm8974DownloadTool to install ColorOS.
It went okay, all finished and I got the green letters in the end.
Still doesn't boot up, nothing changed.
I cannot detect my phone via ADB. Tried with the drivers and without the drivers and with clean drivers.
What can I do? I always had such care for my phone in case of an emergency, but for some weird reason this happened. I wasn't even messing up with the phone, it just died cause I turned it off while booting up?
Okay so, for some reason, I managed to get my phone on fastboot.
I used this guide http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
To reset my phone.
and the phone did all the new loadings and installs ETC....in the end?
My phone still doesn't boot.
Like wow?...
cyldman said:
Okay so, for some reason, I managed to get my phone on fastboot.
I used this guide http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
To reset my phone.
and the phone did all the new loadings and installs ETC....in the end?
My phone still doesn't boot.
Like wow?...
Click to expand...
Click to collapse
I'm sorry I can't help but one bad move was probably resetting back to stock because now you lost your root and adb access..
jukiewalsh said:
I'm sorry I can't help but one bad move was probably resetting back to stock because now you lost your root and adb access..
Click to expand...
Click to collapse
What do you mean I lost my adb access? I can still find my phone there and it's still working. (aparrently)
I tried to use the command "fastboot reboot" and while it turns off the device from windows, it still doesn't boot back up.
cyldman said:
What do you mean I lost my adb access? I can still find my phone there and its still working. (aparrently)
I tried to use the command "fastboot reboot" and while it turns off the device from windows, it still doesnt boot back up.
Click to expand...
Click to collapse
Disregard that then, when the phone is booted you have to manually give adb access but you're right when it's in recovery or other modes it's already there.
Does your screen power on at all? Do you think your LCD/digitizer could've somehow just died on you?
I highly doubt it, it happened when I shut off the phone when it was rebooting. I dont hear anything when I turn on the phone and i cant press anything or slide to unlock. nothing. so ....yeah. Weird stuff is that I did fastboot reboot and now i can't get to fastboot again. sigh.
Read this thread:
http://forum.xda-developers.com/oneplus-one/help/wrong-kernel-black-screen-fastboot-adb-t2835696
Somewhere within it is the solution to your QHSUSB_BULK problem.
Already did bro, and I fixed it, did you even read my full post? I managed to install colorOS, but it's still not booting up.
Hello guys! Last update! My phone was not even vibratting when i pressed power button. I put it to charge and finnaly I got a screen. its not what I wanted...but its a small step!
Its the Low battery charge icon! So...I've heard about this other issue about the phone not charging. Could this be it? I will be trying some techniques like https://forums.oneplus.net/threads/...een-opo-not-booting-due-over-discharge.88107/.
Hopefully it will help, but it may take some days.
Hello guys,
so two days ago just when I was heading into work my phone randomly started restarting itself again and again. I had it in my pocket, mobile data and wifi off and nothing really going on when this happened. I was on stock Cyanogen OS with 6.0.1, rooted and with Xposed, but nothing too crazy or experimental.
The phone would boot with a small vibration to the Oneplus logo with the "Powered by Android" writing, stay on that for about 17-18 seconds, then reboot again. No way of going to the recovery with the hardware keys, it would just reboot the same again and again. Since I couldn't really do much, not turn it off and no way of disconnecting the battery, I just had to watch it reboot helplessly until the battery was dead. At home with some hassle I could get it charged again, which basically consisted of charging it while it kept rebooting and cooling it while doing that since it would get really, really hot.
The only option that really works is is getting it into fastboot via the volume up + power button. But in fastboot nothing I did so far changed even the smalles thing about it's behaviour. I tried flashing a new recovery image, letting it boot into the recovery via fastboot (both stock recovery and TWRP), reflashing the complete OS via fastboot again (CM 13 ZNH2KAS3P0), completely wiping it via fastboot and flashing an older ROM (CM11S XNPH44S) but so far nothing has even changed a thing. It keeps booting to the Oneplus logo for about 17-18 seconds before rebooting. The only thing that has changed is with the CM11S ROM the fastboot logo of the android head is now bigger.
I checked the bootloader via fastboot, but it's still unlocked.
So yeah, I'm at my wits end and desperate for any help. At this point I fear it might be a hardware issue and I can trash it, but I'm ready to grasp for straws as I don't really have the money for a new device yet.
Any help is appreciated! Thanks guys!
Atomschlumpf said:
Hello guys,
so two days ago just when I was heading into work my phone randomly started restarting itself again and again. I had it in my pocket, mobile data and wifi off and nothing really going on when this happened. I was on stock Cyanogen OS with 6.0.1, rooted and with Xposed, but nothing too crazy or experimental.
The phone would boot with a small vibration to the Oneplus logo with the "Powered by Android" writing, stay on that for about 17-18 seconds, then reboot again. No way of going to the recovery with the hardware keys, it would just reboot the same again and again. Since I couldn't really do much, not turn it off and no way of disconnecting the battery, I just had to watch it reboot helplessly until the battery was dead. At home with some hassle I could get it charged again, which basically consisted of charging it while it kept rebooting and cooling it while doing that since it would get really, really hot.
The only option that really works is is getting it into fastboot via the volume up + power button. But in fastboot nothing I did so far changed even the smalles thing about it's behaviour. I tried flashing a new recovery image, letting it boot into the recovery via fastboot (both stock recovery and TWRP), reflashing the complete OS via fastboot again (CM 13 ZNH2KAS3P0), completely wiping it via fastboot and flashing an older ROM (CM11S XNPH44S) but so far nothing has even changed a thing. It keeps booting to the Oneplus logo for about 17-18 seconds before rebooting. The only thing that has changed is with the CM11S ROM the fastboot logo of the android head is now bigger.
I checked the bootloader via fastboot, but it's still unlocked.
So yeah, I'm at my wits end and desperate for any help. At this point I fear it might be a hardware issue and I can trash it, but I'm ready to grasp for straws as I don't really have the money for a new device yet.
Any help is appreciated! Thanks guys!
Click to expand...
Click to collapse
how old is the device?
As far as I know my sister bought it around summer 2014 when it was released, I got it in late 2015
Atomschlumpf said:
As far as I know my sister bought it around summer 2014 when it was released, I got it in late 2015
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
AFAIK,If this toolkit can't fix your device then it's definitely hw issue.
Mr.Ak said:
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
AFAIK,If this toolkit can't fix your device then it's definitely hw issue.
Click to expand...
Click to collapse
Well, the tool won't even recognize my phone, so I guess I'm **** out of luck ¯\_(ツ)_/¯
****ing great....
Atomschlumpf said:
Well, the tool won't even recognize my phone, so I guess I'm **** out of luck ¯\_(ツ)_/¯
****ing great....
Click to expand...
Click to collapse
Lol,gave up that early?
It needs around 10 tries to get it correctly recognised.
Use XP system with the proper drivers given in the above thread.This tool doesn't work on adb/fastboot,it works on Usb Debugging Port,hence requires different drivers.
Mr.Ak said:
Lol,gave up that early?
It needs around 10 tries to get it correctly recognised.
Use XP system with the proper drivers given in the above thread.This tool doesn't work on adb/fastboot,it works on Usb Debugging Port,hence requires different drivers.
Click to expand...
Click to collapse
No, I didn't. I tried the USB Drivers I had already installed, the drivers that came in the package and the QPST Tool suggested in the thread on both my and my girlfriends laptop. But if it doesn't work on ADB/fastboot I probably can't use it anyway since my only two options are having the phone on the fastboot screen or having it constantly reboot....
At this point I'm just really, really frustrated and have sorta accepted it's very likely a hardware issue
I'm with the same problem. In my case, the tool does recognize and shows green after the end but when i try to boot, it only shows the boot logo.
I can enter in fastboot and trying the command "fastboot continue" the brightness goes up, but nothing else
already tried various tools, back to stock, qualcomm , and none worked, so can i throw it out of the window?
Edit: can't enter in recovery, and unlike the op, my phone doesn't reboot (at least i didn't notice it)
After 8 years of tinkering with Android phones I have no clue how this happened.
PIXEL 2 (Walleye, non-xl)
Tried getting TWRP and ElementalX working but either one or both weren't doing there thing, though I could at least boot and use my phone normally. Finally ended in a situation where I couldn't boot passed fastboot with an error at the bottom "ERROR: LoadImageAndAuth Failed: Load Error". Found a fix that said to change the active partition. Set it to b and that worked and surprise it loads TWRP...so somehow TWRP was installed, but I can't actually load Android.
Grabbed the latest factory image and manually flashed all the files in the zip-within-the-zip. Everything flashed with no hiccups so I rebooted to bootloader with the intention to then reboot the system, and now this is happening:
TLDR Phone won't turn on. Holding PWR+VolDown SEEMS to do nothing, but it actually flashes a line on the screen like it's trying to load something for a milisecond, then does nothing. Holding PWR+VolUp does nothing. Holding PWR+VolUp+VolDown does the same screen flash followed by the notification LED blinking red 2 or 3 times. Please help!
EDIT: if it matters, the phone is about 50% battery and currently still on judging purely by the fact that it's been warm for about an hour.
sorry for your troubles, i have yet to see this with our phones. Just to get some more information, what happens when you try and charge it? If you plug your phone in to a computer via USB, does it show up in devices? If it shows in devices, can you run platform-tools and see if it shows up via fastboot devices with an ID? If you can connect to fastboot, you could attempt to flash images that way.
djer34 said:
sorry for your troubles, i have yet to see this with our phones. Just to get some more information, what happens when you try and charge it? If you plug your phone in to a computer via USB, does it show up in devices?
Click to expand...
Click to collapse
Nothing happens if I plug into the computer, no sound and not listed in devices. Plugging it in to the charger does nothing except possibly charges it, but I wouldn't know because the screen doesn't seem to be able to turn on for more than a milisecond of a flash.
I had this same problem when I flashed Elemental X kernel over top of the flash kernel and all I did was use the flash-all script that is included with the system image from google. This got me back to my OS where I flashed elemental and magisk. Do you have insurance through your provider?