Motion Control - Ascend Mate 7 Q&A, Help & Troubleshooting

After updating to C00B127 disappeared motion control options.
Does anyone of you can remedy this?

leezus said:
After updating to C00B127 disappeared motion control options.
Does anyone of you can remedy this?
Click to expand...
Click to collapse
Had the same problem last time...flashed back the ORIGINAL stock RECOVERY and re-downloaded the correct ROM again. Then re-flashed the ROM. Everithing was fine.
Please try to re-install the STOCK RECOVERY first.
Then let me know if they' re back.

leezus said:
After updating to C00B127 disappeared motion control options.
Does anyone of you can remedy this?
Click to expand...
Click to collapse
IF you install rom by pressing 3btn your motion things will appear..
obviously you need backup personal files b4 proceeding 3btn flash

what does it mean "3btn" ?

leezus said:
what does it mean "3btn" ?
Click to expand...
Click to collapse
all three pressing buttons what you will find on your phone .. press them all while phone is off .. (and obviously when you ready to flash)

Simona Simmy said:
all three pressing buttons what you will find on your phone .. press them all while phone is off .. (and obviously when you ready to flash)
Click to expand...
Click to collapse
I have same problem. I will try it.

Hi Guys, I have same problem. I copied the same install of the lollipop install, correct version. Did the install but constantly get failed message on 94 and 97%

Related

[Q] help me! please help! soft bricked my lenovo a800

Hi everyone, i am new to xda. Ive soft bricked my lenovo a800 by manually installing fonts and after reboot, soft bricked my phone. I have stock recovery with usb debugging disabled accidently. My pc is detecting my phone but cannot access it. Ive wanted to flash it to stock rom and flash tool is not detecting it. Does anyone has any solution to my worst problem ? please help cause i dont want to give away 500 to 700 bucks for a service center. Help me
prajwal999 said:
Hi everyone, i am new to xda. Ive soft bricked my lenovo a800 by manually installing fonts and after reboot, soft bricked my phone. I have stock recovery with usb debugging disabled accidently. My pc is detecting my phone but cannot access it. Ive wanted to flash it to stock rom and flash tool is not detecting it. Does anyone has any solution to my worst problem ? please help cause i dont want to give away 500 to 700 bucks for a service center. Help me
Click to expand...
Click to collapse
Are you able to use the power button to "kind of" reboot? (like, it doesn't actually start up, but it still responds to the power button)
yes
thenookieforlife3 said:
Are you able to use the power button to "kind of" reboot? (like, it doesn't actually start up, but it still responds to the power button)
Click to expand...
Click to collapse
Thanks for replying. It boots and get stuck at lenovo loading screen. I dont even have nandroid backup.
prajwal999 said:
Thanks for replying. It boots and get stuck at lenovo loading screen. I dont even have nandroid backup.
Click to expand...
Click to collapse
So it does respond to the power button, even if it doesn't actually boot up?
thenookieforlife3 said:
So it does respond to the power button, even if it doesn't actually boot up?
Click to expand...
Click to collapse
Yes it is soft bricked
but
prajwal999 said:
Yes it is soft bricked
Click to expand...
Click to collapse
I still can go to stock recovery and yet makes no sense
prajwal999 said:
I still can go to stock recovery and yet makes no sense
Click to expand...
Click to collapse
Why does it make no sense? I was going to recommend using ClockworkMod, but...
thenookieforlife3 said:
Why does it make no sense? I was going to recommend using ClockworkMod, but...
Click to expand...
Click to collapse
I could have done it with cmw but i have stock recovery and it is of no use...
prajwal999 said:
I could have done it with cmw but i have stock recovery and it is of no use...
Click to expand...
Click to collapse
I need you to please speak with a little more enunciation. I am not really understanding what you are trying to say.
What have you done so far, and what has not been successful?
thenookieforlife3 said:
I need you to please speak with a little more enunciation. I am not really understanding what you are trying to say.
What have you done so far, and what has not been successful?
Click to expand...
Click to collapse
What ? Let me put this way. My phone has stock recovery, usb debugging disabled, boot looping, windows cant read my android and i dont have nandroid backup and i have stock rom...
prajwal999 said:
What ? Let me put this way. My phone has stock recovery, usb debugging disabled, boot looping, windows cant read my android and i dont have nandroid backup and i have stock rom...
Click to expand...
Click to collapse
Yo! Whats your age ? And which grade or class are you studying in ?
prajwal999 said:
Yo! Whats your age ? And which grade or class are you studying in ?
Click to expand...
Click to collapse
Are you talking to me?
You replied to your own post, so...
P.S. I am not at liberty to share that information. Why do you need it?
The instructions to factory-reset your a800:
1. Press together : POWER + VOLUME UP about several second, a warning will appear onscreen.
2. Choose "Reset Device".
3. Reboot.
You should be back to stock and your problem fixed.
tried that!
thenookieforlife3 said:
Are you talking to me?
You replied to your own post, so...
P.S. I am not at liberty to share that information. Why do you need it?
The instructions to factory-reset your a800:
1. Press together : POWER + VOLUME UP about several second, a warning will appear onscreen.
2. Choose "Reset Device".
3. Reboot.
You should be back to stock and your problem fixed.
Click to expand...
Click to collapse
I've tried that several times. But there is a problem in my rom. Any ideas?
thenookieforlife3 said:
Are you talking to me?
You replied to your own post, so...
P.S. I am not at liberty to share that information. Why do you need it?
The instructions to factory-reset your a800:
1. Press together : POWER + VOLUME UP about several second, a warning will appear onscreen.
2. Choose "Reset Device".
3. Reboot.
You should be back to stock and your problem fixed.
Click to expand...
Click to collapse
Any ideas? I want my phone back. Please!!
help me!!
Does anyone have fix for my phone
guys please help my my Lenovo A800 after 10 seconds it wel close again stock at Lenovo logo ,I can't even use factory mode,after 10 seconds it will close to,no choose directory,no choose clearing data or normal boot,nothing,only when I press Power and volume up,You are in factory mode press power button and the normal boot,and it will close,are this problem can be fix?

Bootloop problem with new EMUI update

Hello, last night i received the message that my phone needed to update itself to the new firmware so i did that.
When the phone rebooted it just put me onto a black screen with the twrp logo flashing every 5 seconds, i figured out that it was because of me running an old version of twrp and i
flashed it and rebooted and everything worked great but then i tried to root my phone with supersu and the phone switched logo in the boot from the honor logo to the android logo and froze there,
i managed to fix that aswell. Now to the problem i am facing right now, the phone got similar problems again so i attempted a normal factory reset, didn't help so i tried to format data and it removed everything but i am still stuck at the infinite booting loop when i start my phone. Does anyone know how to fix this? I do not have the money to purchase a new one
I have access to adb and twrp just so you know.
Liaam121 said:
I have access to adb and twrp just so you know.
Click to expand...
Click to collapse
Flash the rollback package.
krchi said:
Flash the rollback package.
Click to expand...
Click to collapse
Where can i get this from? I know it may sound obnoxious but i am just wondering if it is a download link or something you can already access.
On Support page on HiHonor web
KoumiCZ said:
On Support page on HiHonor web
Click to expand...
Click to collapse
Found it, should i just flash it with adb or?
What is the command. I am not a native english speaker aswell so just a quick guide so i know what to do would be appreciated
https://club.hihonor.com/in/eyestow...-marshmallow-this-is-what-you-should-do.11907
KoumiCZ said:
https://club.hihonor.com/in/eyestow...-marshmallow-this-is-what-you-should-do.11907
Click to expand...
Click to collapse
When i press the volume up + down and power button it brings me to twrp, i can't manage to get into erecovery mode.
Nvm i got in. However when i get into the mode and press the recovery button it spins until it displays this message "Getting package info failed". Do i have to do it through erecovery?
I do not know another method.
KoumiCZ said:
I do not know another method.
Click to expand...
Click to collapse
Well isn't flashing a option in adb?
You can try. But I do not know the method.
KoumiCZ said:
You can try. But I do not know the method.
Click to expand...
Click to collapse
.., i guess i can't do anything. I wonder tho, am i not able to just install the firmware itself since i wiped everything?
Did you try dload?!
Liaam121 said:
.., i guess i can't do anything. I wonder tho, am i not able to just install the firmware itself since i wiped everything?
Click to expand...
Click to collapse
Flashing in ADB is risky. Better try erecovey method

Stuck in boot logo.

Hye all,
My phone is stuck in boot logo(honor 8 FRD L19C636),
unable to go to recovery but only able to go to fastboot & rescue mode.
-phone locked
-FRP lock
anyone can help me,?
You may have to manually reinstall the OS back on your device.
iceepyon said:
You may have to manually reinstall the OS back on your device.
Click to expand...
Click to collapse
how can i manualy reinstall the OS?
june28dane said:
how can i manualy reinstall the OS?
Click to expand...
Click to collapse
I have the same issue try to extract update.img and flash manually recovery.img etc... if you can't and have FAILED... then i can't help you because i'm stuck in the same ****.
iceepyon said:
You may have to manually reinstall the OS back on your device.
Click to expand...
Click to collapse
Ive never tried this method. Will check later and then update here after tried it.
Quite bz handle my newborn kids
june28dane said:
how can i manualy reinstall the OS?
Click to expand...
Click to collapse
You would have to download the OS files onto your computer. Connect your device to your computer via USB and boot your device into download mode. You may also need to install applications to install the OS back onto your device. It's been a while since I've done that.
sidqara said:
Hye all,
My phone is stuck in boot logo(honor 8 FRD L19C636),
unable to go to recovery but only able to go to fastboot & rescue mode.
-phone locked
-FRP lock
anyone can help me,?
Click to expand...
Click to collapse
I had the same experience, and the only think i was able to do was to went to the first assistance center. Cause i was not able to get my OEM unlock code.
Your bootloader's locked, so manual flashing won't work.
If you don't have any exzperience in this regard, I'd suggest a visit to the nearest Service Center
Otherwise, 'dload' is your friend. Find an 'old'(marshmallow maybe) full stock Firmware package for your phone(the correct model). It'll be around 3GB when extracted. Copy the Update.app file and put it in a folder named 'dload' in your SD Card. Insert the SD card in your phone and press&hold Vol+,Vol- and Power button simultaneously until installation begins. If it fails then you've chosen a wrong firmware. If it goes all well, your phone should be up and running.
If it gets fixed, unlock your bootloader first thing, then you can flash the latest Nougat if you want
Dload is the easiest way around. :angel:
Unable to dload. When i press vol + - powerbutton. Its just restart and not load to install.
Its keep on restart , i also noticed it does not have bootanimation.only honor screen
sidqara said:
Unable to dload. When i press vol + - powerbutton. Its just restart and not load to install.
Its keep on restart , i also noticed it does not have bootanimation.only honor screen
Click to expand...
Click to collapse
Did you hold it long enough?
itisiryan said:
Did you hold it long enough?
Click to expand...
Click to collapse
yeah i'm sure . when im hold the button, it will vibrate 2 times and then nothing happen, its only appear the blue honor wallpaper
just send my phone to service center yesterday, waiting for their call to pickup later, . myb 2-3 days
sidqara said:
just send my phone to service center yesterday, waiting for their call to pickup later, . myb 2-3 days
Click to expand...
Click to collapse
I have the same situation. If the service center came to repair your phone, please let me know.
sidqara said:
yeah i'm sure . when im hold the button, it will vibrate 2 times and then nothing happen, its only appear the blue honor wallpaper
Click to expand...
Click to collapse
yeah same with me, already try many method. but not work.
chmn said:
I have the same situation. If the service center came to repair your phone, please let me know.
Click to expand...
Click to collapse
EroVegency said:
yeah same with me, already try many method. but not work.
Click to expand...
Click to collapse
got a call from service center and they said phone is ready to pick up
Just pickup the phone. They give me a new phone.

Honor 8 screen upside down and reversed

Hello everyone!
I dont know if someone already posted this thread, but I'm a bit desperate now. Here is my problem.
A few days ago I was sliding through Facebook, when my phone screen just turned upside down and backwards.
1) Restarted the phone - NOTHING.
2) Rooted and tried to modify a line in system folder (rotation) that everyone said would solve the problem, but the line doesn't eve exist.
3) Factory reset and flashed stock firmware- NOTHING.
4) Tried updating screen firmware through MMI/USSD code, but phone refuses to execute codes.
Rtl layout is not on just so we're clear.
Screenshot is normal. The controls are the same, but the picture is upside down, so I would'nt say it's a hardware problem.
Any suggestions before I replace the damn screen?
Picture link below.
https://imgur.com/JWuTMrX
https://imgur.com/JWuTMrX
That is kind of weird, unfortunately I have nothing to advice that you didn't perform previously , I think the best thing to do is to send it to customer service :/
In my opinion it is a software issue and changing the screen won't resolve it
Weird.
Is it revered in fastboot or recovery too?
This would highlight if it's a screen issue or ROM software...
lgrubisic2 said:
https://imgur.com/JWuTMrX
Click to expand...
Click to collapse
Boot logo, recovery or fastboot also reversed??
linkazoid said:
Is it revered in fastboot or recovery too?
This would highlight if it's a screen issue or ROM software...
Click to expand...
Click to collapse
It's reversed in recovery mode, but not fastboot. So weird
hassanjavaid8181 said:
Boot logo, recovery or fastboot also reversed??
Click to expand...
Click to collapse
It's reversed in recovery mode, but not fastboot.
lgrubisic2 said:
It's reversed in recovery mode, but not fastboot.
Click to expand...
Click to collapse
Give it a try flashing another firmware via dload... May that could help..
Ok, we have a brealthrough! I flashed a few new firmwares, and when I flashed the last one the picture went to normal orientation, but now the screen is flickering and blinking and going bananas.
lgrubisic2 said:
Ok, we have a brealthrough! I flashed a few new firmwares, and when I flashed the last one the picture went to normal orientation, but now the screen is flickering and blinking and going bananas.
Click to expand...
Click to collapse
LOL.. those are really strange issues.. :laugh:
Downgrade your phone to marshmellow.. Try flashing marshmallow firmware.. If it went back to normal upgrade to nougat via OTA.
Holy crap it's back to normal. I went to developer options and disabled HW overlay. Apparently CPU and GPU were ''fighting'' over who's going to control the screen. So for anyone who has the same issue as me, and none of the solutions I mentioned in the first post help- flash stock firmaware/firmwares, and if the problem persists, disable HW overlay. Thanks a lot guys
EDIT - Oh and flashing firmware via dload worked like a charm. Thanks hassanjavaid8181
lgrubisic2 said:
Holy crap it's back to normal. I went to developer options and disabled HW overlay. Apparently CPU and GPU were ''fighting'' over who's going to control the screen. So for anyone who has the same issue as me, and none of the solutions I mentioned in the first post help- flash stock firmaware/firmwares, and if the problem persists, disable HW overlay. Thanks a lot guys
EDIT - Oh and flashing firmware via dload worked like a charm. Thanks hassanjavaid8181
Click to expand...
Click to collapse
Good to hear..enjoy

Smartisan R1 Finally Rooted !

Smartisan R1 Finally Rooted !
Could you share how you managed to get it work ? and does it effect OTA updates ?
D.Spirit said:
Could you share how you managed to get it work ? and does it effect OTA updates ?
Click to expand...
Click to collapse
Yes I will write a guide soon. You loose fastboot after OTA, what I do is unpack OTA files and flash from fastboot without touching bootloader, then it's ok.
os_man said:
Smartisan R1 Finally Rooted !
Click to expand...
Click to collapse
so cool! I also want to root, I hope to get a tutorial. My system version is v6.6.6.3_TNT
os_man said:
Yes I will write a guide soon. You loose fastboot after OTA, what I do is unpack OTA files and flash from fastboot without touching bootloader, then it's ok.
Click to expand...
Click to collapse
please instructions
evelinanevinnaya said:
please instructions
Click to expand...
Click to collapse
https://bbs.mokeedev.com/t/topic/13653
Any help on U3
os_man said:
Yes I will write a guide soon. You loose fastboot after OTA, what I do is unpack OTA files and flash from fastboot without touching bootloader, then it's ok.
Click to expand...
Click to collapse
I have a Smartisan Nut3(aka u3) and have not been able to use it in months! Because unfortunately I can't bypass lockscreen, and recovery menu ( by holding vol dwn + power at startup) has no factory reset option! Only: reboot, reboot to bootloader ( Which only restarts phone to lockscreen), Apply update from ADB( tried using but USB debugging is lock I assume etc or I could be doing it incorrectly to bypass lockscreen or factory resetting it), apply update from SD card ( also tried but when I put card in I can't locate it. And when I go this menu without a SD in phone it still displays this long file list as if theirs a SD card in it. It always shows same files.), Wipe cache partition, shutdown.
And I've done all the YouTube methods to bypass lockscreen etc. I would love to get this phone working. It has become a constant ache, one of those little tech problems that's become to fully test me, beating me. Any help would be greatly appreciated thank you.
TechBoss509 said:
I have a Smartisan Nut3(aka u3) and have not been able to use it in months! Because unfortunately I can't bypass lockscreen, and recovery menu ( by holding vol dwn + power at startup) has no factory reset option! Only: reboot, reboot to bootloader ( Which only restarts phone to lockscreen), Apply update from ADB( tried using but USB debugging is lock I assume etc or I could be doing it incorrectly to bypass lockscreen or factory resetting it), apply update from SD card ( also tried but when I put card in I can't locate it. And when I go this menu without a SD in phone it still displays this long file list as if theirs a SD card in it. It always shows same files.), Wipe cache partition, shutdown.
And I've done all the YouTube methods to bypass lockscreen etc. I would love to get this phone working. It has become a constant ache, one of those little tech problems that's become to fully test me, beating me. Any help would be greatly appreciated thank you.
Click to expand...
Click to collapse
Soory didn't see this message, did you fixed it?
Help
os_man said:
Soory didn't see this message, did you fixed it?
Click to expand...
Click to collapse
Unfortunately I still have not been able to. I have put so much time into researching and trying everything.
If theirs any advice or options you can tell me to either factory reset it or bypass the lockscreen pattern or whatever i can do to be able to use it would be beyond appreciated because i haven't even been successful? with someone else trying to. So please HELP ME PLEASEEEE?
TechBoss509 said:
Unfortunately I still have not been able to. I have put so much time into researching and trying everything.
If theirs any advice or options you can tell me to either factory reset it or bypass the lockscreen pattern or whatever i can do to be able to use it would be beyond appreciated because i haven't even been successful with someone else trying to. So please HELP ME PLEASEEEE
Click to expand...
Click to collapse
You just need factory from (Qfil from), all Smartisans have it, you can probably google and find it. If you can't, let me know ([email protected])
os_man said:
Smartisan R1 Finally Rooted !
Click to expand...
Click to collapse
how to get fastboot, i try combo key but not working
os_man said:
Smartisan R1 Finally Rooted !
Click to expand...
Click to collapse
can you sent firmware smartisan r1, my phone stuck fastboot
whynot4444 said:
can you sent firmware smartisan r1, my phone stuck fastboot
Click to expand...
Click to collapse
坚果手机 R1 魔趣刷入教程 (MK81/MK90)
注意: 这是 MK81.0/MK90.0 的旧版教程,已过时,不适用于 MK100。如果需要刷入基于 Android 10 的 MK100,请移步:坚果手机 R1 魔趣刷入教程 (MK100) 写在前面 该手机的厂商不提供刷机保修,意味着刷机后你将失去保修资格,且需要自己承担失手造成故障的风险; 该手机首次刷机需要特殊的工具和极强的动手能力,请先充分阅读本帖再决定是否继续刷机; 魔趣是原生系统,不包含(也不会加入)一步、大爆炸、TNT 等 Smartisan OS 特色功能;该手机解锁后无法使用微信指纹支付。如果你离不开他们,不建议你尝试魔趣;...
bbs.mokeedev.com

Categories

Resources