Related
It's hell suffering this,
"Launcher is'nt responding" with black screen. Again Using the fone after rebooting.
What's the actual problem, getting rid of this prob...?
1000 thanx for solution....
nitesh kanna said:
It's hell suffering this,
"Launcher is'nt responding" with black screen. Again Using the fone after rebooting.
What's the actual problem, getting rid of this prob...?
1000 thanx for solution....
Click to expand...
Click to collapse
it would be helpful, if you had stated your current rom, and the modifications in it.
If you are on stock, then i think that it is probably a bad flash, solution, would be to reflash the rom again.....but clean the dalvik and /system and /boot from recovery, before flashing......just to be safe.
ankitaggarwal001 said:
it would be helpful, if you had stated your current rom, and the modifications in it.
If you are on stock, then i think that it is probably a bad flash, solution, would be to reflash the rom again.....but clean the dalvik and /system and /boot from recovery, before flashing......just to be safe.
Click to expand...
Click to collapse
Hi,
Facing lot of probs with the lags in my stock rom...tired with this. Please suggest me @ankitaggarwal001 the best rom for Micromax A110..ensuring no probs with music player, camera, battery performance,etc. Don't mind if I'm expecting more
Thanks in advance
Nitesh
nitesh kanna said:
Hi,
Facing lot of probs with the lags in my stock rom...tired with this. Please suggest me @ankitaggarwal001 the best rom for Micromax A110..ensuring no probs with music player, camera, battery performance,etc. Don't mind if I'm expecting more
Thanks in advance
Nitesh
Click to expand...
Click to collapse
For my use, i found Grand V3 to be best, Suvi V15 is a close second for me, and MIUI and lewa os roms are just for fun/ if you dont use any heavy aps/games (both these are good looking functional roms.)
So depending on your preference, you can go about installing the roms.
Note: My original phone was replaced under warranty by mmx with one which had Jb out of the box, and so because of the rear cam issue i haven't used the 4.2 roms yet, so cant guide you on that.
nitesh kanna said:
It's hell suffering this,
"Launcher is'nt responding" with black screen. Again Using the fone after rebooting.
What's the actual problem, getting rid of this prob...?
1000 thanx for solution....
Click to expand...
Click to collapse
how about changing just your launcher? with custom roms come lots of problems.
Sent from my Q500 using XDA Premium 4 mobile app
todopertin said:
how about changing just your launcher? with custom roms come lots of problems.
Sent from my Q500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
@todopertin you are wrong bro, there are many stable n bugs free roms available for micromax a110...
@nitesh kanna search n download as per ur requirement...or u may downlaod as per suggestion by ankitaggarwal001..
i'm using ultimate galaxy v3 rom by thunder_droid... u just need search rom for ur suits like gaming or style or etc...
sdkzone said:
@todopertin you are wrong bro, there are many stable n bugs free roms available for micromax a110...
@nitesh kanna search n download as per ur requirement...or u may downlaod as per suggestion by ankitaggarwal001..
i'm using ultimate galaxy v3 rom by thunder_droid... u just need search rom for ur suits like gaming or style or etc...
Click to expand...
Click to collapse
Hi,
You guys are really confusing me with multiple options. I usually dont play too heavy games on my android as sometimes even Subway Surfers gets stopped automatically. My basic priority is the performance with all basic apps like Music Player, Camera(as said rear cam issue), Battery StandBy Time, etc. functioning properly and with no lags. When i gone through the Grand V3 or CanvaS4 custom ROM's, these are the basic problems i have seen. So @sdkzone @todopertin can you please suggest me with the above mentioned requirements.
Thanks in advance
Nitesh
nitesh kanna said:
Hi,
You guys are really confusing me with multiple options. I usually dont play too heavy games on my android as sometimes even Subway Surfers gets stopped automatically. My basic priority is the performance with all basic apps like Music Player, Camera(as said rear cam issue), Battery StandBy Time, etc. functioning properly and with no lags. When i gone through the Grand V3 or CanvaS4 custom ROM's, these are the basic problems i have seen. So @sdkzone @todopertin can you please suggest me with the above mentioned requirements.
Thanks in advance
Nitesh
Click to expand...
Click to collapse
You can choose ur rom from this forum http://forum.xda-developers.com/showthread.php?t=2172561 it will help you. there r many stable rom for ur suits
Hi
@sdkzone a big thanks for your advice.. Got CanGalaxyS4 by @akashrt . It is brilliant with minor flaws. Though minor flawsI would like to share with you guys. Touchwiz is not upto r expectations. When we try to open a app, it is taking time to open up. Camera is not upto expectation. Waiting for an upgraded version from you @akashrt . But many thanks for you anyway.
Thanks in advance
Nitesh
sdkzone said:
@todopertin you are wrong bro, there are many stable n bugs free roms available for micromax a110...
@nitesh kanna search n download as per ur requirement...or u may downlaod as per suggestion by ankitaggarwal001..
i'm using ultimate galaxy v3 rom by thunder_droid... u just need search rom for ur suits like gaming or style or etc...
Click to expand...
Click to collapse
Hi,
I am currently on CanGalaxyS4 ROM by akashrt , Gone through ultimate galaxy v3 ROM by thunder_droid as you @sdkzone mentioned. Interesting it is. Responsiveness is definitely not good in CanGalaxyS4. Hope that is fine with yours. FYI I am on JB 4.1.x, so it seems i have to upgrade to a new kernel to flash the ultimate galaxy v3 ROM. Have you done the same ? , If so..how is it? Can you suggest me a good kernel please. Are you guys sure there is no hardware damage during these upgrades ?
Thanks in advance
Nitesh
nitesh kanna said:
Hi,
I am currently on CanGalaxyS4 ROM by akashrt , Gone through ultimate galaxy v3 ROM by thunder_droid as you @sdkzone mentioned. Interesting it is. Responsiveness is definitely not good in CanGalaxyS4. Hope that is fine with yours. FYI I am on JB 4.1.x, so it seems i have to upgrade to a new kernel to flash the ultimate galaxy v3 ROM. Have you done the same ? , If so..how is it? Can you suggest me a good kernel please. Are you guys sure there is no hardware damage during these upgrades ?
Thanks in advance
Nitesh
Click to expand...
Click to collapse
hello nitesh
we are currently using kernel ver 3.4.78-xtreme-leap & there is no hardware damage during these upgrades...if u have a prob in CanGalaxyS4 rom? like lags, flawless please try any performance script like suvi booster by bsuhas or pureperformance X byrishabh bagrecha both links are mension below
For Suvi Booster - http://forum.xda-developers.com/showthread.php?t=2499051 (credit to bsuhas)
For PurePerformances™X For A110 - http://forum.xda-developers.com/showthread.php?t=2386430 (credit to Rishabh Bagrecha)
---------- Post added at 12:34 PM ---------- Previous post was at 12:31 PM ----------
nitesh kanna said:
Hi
@sdkzone a big thanks for your advice.. Got CanGalaxyS4 by @akashrt . It is brilliant with minor flaws. Though minor flawsI would like to share with you guys. Touchwiz is not upto r expectations. When we try to open a app, it is taking time to open up. Camera is not upto expectation. Waiting for an upgraded version from you @akashrt . But many thanks for you anyway.
Thanks in advance
Nitesh
Click to expand...
Click to collapse
try a secondary cam from play store or 4.4 cam app from xda threads please search for ur expectations.
sdkzone said:
hello nitesh
we are currently using kernel ver 3.4.78-xtreme-leap & there is no hardware damage during these upgrades...if u have a prob in CanGalaxyS4 rom? like lags, flawless please try any performance script like suvi booster by bsuhas or pureperformance X byrishabh bagrecha both links are mension below
For Suvi Booster - http://forum.xda-developers.com/showthread.php?t=2499051 (credit to bsuhas)
For PurePerformances™X For A110 - http://forum.xda-developers.com/showthread.php?t=2386430 (credit to Rishabh Bagrecha)
Click to expand...
Click to collapse
Hello @sdkzone
Are these scripts capable of setting "auto-frequency" or simply the manual ones which they encripted to it ? I could not see the "auto-frequency" in my SetCPU app. Do you have any idea about SetCPU working in your kernel 3.4.78 ?
Thanks in advance
Nitesh
nitesh kanna said:
Hello @sdkzone
Are these scripts capable of setting "auto-frequency" or simply the manual ones which they encripted to it ? I could not see the "auto-frequency" in my SetCPU app. Do you have any idea about SetCPU working in your kernel 3.4.78 ?
Thanks in advance
Nitesh
Click to expand...
Click to collapse
ur Ans is here bro...Credit to there respected developer
New Changelog for Xtreme-Leap:
1. interactive, conservative, hybrid, ondemand, powersave, performance, intellidemand, dynamic-interactive, smartass3H, hyper, hotplug CPU governors added.
2. noop, deadline, cfq, sio, sioplus, zen, bfq I/O scheduler added.
3. Changed LMK values for internal task manager means more free memory.
4. Changed to hotplug and sioplus[/u] as default CPU governor and I/O scheduler (4.2.x).
5. Changed to hotplug and sioplus as default CPU governor and I/O scheduler (4.1.x).
6. NTFS OTG support added (NEW).
7. init.d support added.
8. Battery saver and performance MODs added.
9. Compressed with lmza means less size means more performance and less time to boot and more battery juice.
10. Compiled with linaro's latest toolchain.
11. xz compression enabled.
12. Network/WiFi speed and connectivity improved.
13. Dynamic Readahead calculation.
14. All cores working on loaded with heavy process (hotplugging).
15. Dynamic vfs for more battery saving.
16. Camera capture quality improved.
17. Improved Multitasking.
18. Dynamic cache included (Thanks to faux123).
19. Optimized and dynamic lowmemorykiller (Christopher83).
20. Upstream to 3.4.79-rc1.
21. Fixed conservative CPU Frequency Governor for Performance and battery.
22. Uncapped FPS to 60.
23. Improved RAM Consumption by various components.
24. Logger size decreased for more free RAM.
25. Fixed deadline I/O scheduler for improved read and writes.
26. Fixed Derps in Network files.
27. Improved CIFS for faster access.
28. Fixed ondemand CPU governor for more battery saving.
29. Special Performance Optimizations done for more buttery feel.
30. App installating smoothly.
31. Tweaked sio I/O scheduler.
32. Tweaked Android logger.
33. Tweaked OOM.
35. Tweaked Pegasusq for more performance.
36. Tweaked conservativex for more battery.
37. Battery MOD included for the best battery backup ever.
38. More intelligent screen on/off dirty cache cleaning.
39. Improved kernel process management.
40. Main focus for getting more free RAM.
41. ARM CPU Alignment on boot.
42. ARM Auto Hotplugging.
43. Dynamic OOM killer values calculation.
44. Buttery smooth.
45. lmk_fast support added to LMK.
sdkzone said:
ur Ans is here bro...Credit to there respected developer
New Changelog for Xtreme-Leap:
1. interactive, conservative, hybrid, ondemand, powersave, performance, intellidemand, dynamic-interactive, smartass3H, hyper, hotplug CPU governors added.
2. noop, deadline, cfq, sio, sioplus, zen, bfq I/O scheduler added.
3. Changed LMK values for internal task manager means more free memory.
4. Changed to hotplug and sioplus[/u] as default CPU governor and I/O scheduler (4.2.x).
5. Changed to hotplug and sioplus as default CPU governor and I/O scheduler (4.1.x).
6. NTFS OTG support added (NEW).
7. init.d support added.
8. Battery saver and performance MODs added.
9. Compressed with lmza means less size means more performance and less time to boot and more battery juice.
10. Compiled with linaro's latest toolchain.
11. xz compression enabled.
12. Network/WiFi speed and connectivity improved.
13. Dynamic Readahead calculation.
14. All cores working on loaded with heavy process (hotplugging).
15. Dynamic vfs for more battery saving.
16. Camera capture quality improved.
17. Improved Multitasking.
18. Dynamic cache included (Thanks to faux123).
19. Optimized and dynamic lowmemorykiller (Christopher83).
20. Upstream to 3.4.79-rc1.
21. Fixed conservative CPU Frequency Governor for Performance and battery.
22. Uncapped FPS to 60.
23. Improved RAM Consumption by various components.
24. Logger size decreased for more free RAM.
25. Fixed deadline I/O scheduler for improved read and writes.
26. Fixed Derps in Network files.
27. Improved CIFS for faster access.
28. Fixed ondemand CPU governor for more battery saving.
29. Special Performance Optimizations done for more buttery feel.
30. App installating smoothly.
31. Tweaked sio I/O scheduler.
32. Tweaked Android logger.
33. Tweaked OOM.
35. Tweaked Pegasusq for more performance.
36. Tweaked conservativex for more battery.
37. Battery MOD included for the best battery backup ever.
38. More intelligent screen on/off dirty cache cleaning.
39. Improved kernel process management.
40. Main focus for getting more free RAM.
41. ARM CPU Alignment on boot.
42. ARM Auto Hotplugging.
43. Dynamic OOM killer values calculation.
44. Buttery smooth.
45. lmk_fast support added to LMK.
Click to expand...
Click to collapse
Bro, These features are simply superb. Kudos to dev.
Now where will i find this init.d file to remove ? Do i need to reflash my ROM and do it ?
Nitesh
nitesh kanna said:
Bro, These features are simply superb. Kudos to dev.
Now where will i find this init.d file to remove ? Do i need to reflash my ROM and do it ?
Nitesh
Click to expand...
Click to collapse
no bro, u donot need to delete any init.d files for kernel...just flash it....or if u need to delete just go to root directory -> then goto etc folder..there was init.d folder exist.
sdkzone said:
no bro, u donot need to delete any init.d files for kernel...just flash it....or if u need to delete just go to root directory -> then goto etc folder..there was init.d folder exist.
Click to expand...
Click to collapse
Thats easy now. There is an option asking for "Keeping all existing init.d scripts?" Should i go with NO in it ?
Also can i uninstall the SetCPU and SuperUser app which are pre-installed in the ROM after going with this ?
Nitesh
nitesh kanna said:
Thats easy now. There is an option asking for "Keeping all existing init.d scripts?" Should i go with NO in it ?
Also can i uninstall the SetCPU and SuperUser app which are pre-installed in the ROM after going with this ?
Nitesh
Click to expand...
Click to collapse
yes u should go with no...m ye u can uninstall the SetCPU bt please do not uninstall su app if u don't need su any more just unroot ur phone or if u need to change su app goto su app -> settings -> change su app from play store.
sdkzone said:
yes u should go with no...m ye u can uninstall the SetCPU bt please do not uninstall su app if u don't need su any more just unroot ur phone or if u need to change su app goto su app -> settings -> change su app from play store.
Click to expand...
Click to collapse
Hurray....... Now I could'nt see working....how can i check whether it is working fine for me ?
Nitesh
nitesh kanna said:
Hurray....... Now I could'nt see working....how can i check whether it is working fine for me ?
Nitesh
Click to expand...
Click to collapse
if u r asking for direct inject check it via terminal emulator app -> type "free -m"(without quotes) -> hit enter
---------- Post added at 02:02 PM ---------- Previous post was at 02:00 PM ----------
nitesh kanna said:
Hurray....... Now I could'nt see working....how can i check whether it is working fine for me ?
Nitesh
Click to expand...
Click to collapse
if u r asking for cpu gov..try any cpu tuner app from playstore
sdkzone said:
if u r asking for direct inject check it via terminal emulator app -> type "free -m"(without quotes) -> hit enter
---------- Post added at 02:02 PM ---------- Previous post was at 02:00 PM ----------
if u r asking for cpu gov..try any cpu tuner app from playstore
Click to expand...
Click to collapse
Hey, In Emulator, showing : total 473, used 470 and free 2.......Swap is all 0.
Installed CPU Tuner app also. How to use it ? I mean i could not set any frequencies here also...pls help..
Nitesh
Thermonuclear Stuff:
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Introduction:
I'm just starting out with these stuff, so please don't hate. This kernel is supposed to be for performance and battery balanced. Don't expect this kernel to have magic battery life or amazing performance.
Click to expand...
Click to collapse
Features:
SaberMod 6.0 GCC Compiler
GPU overclock 600mhz
GPU underclock 100MHz
CPU underclock 96MHz
Intelliplug 3.9
Zzmoove Gov
Impulse Gov
Intellimm Gov
Intelliactive Gov
Smartmax Gov
PegasusQ Gov
Badass Gov
Dynamic Fsync
Powersuspend
Faux Sound Control 3.2
Kexec-hardboot-patch
Fiops Iosched
Reclaim RAM for loggers
Kernel NEON mode
High Performance Audio
More will come soon
Click to expand...
Click to collapse
Changelog:
4/12/2015
*Initial Release
4/12/15
V2:
Intelliactive
IntelliDemand
SmartMax
4/13/15
V3:
PegasusQ Gov added
Badass Cpu Gov added
Sound Control 3.2 (Faux Sound)
Kexec-hardboot-patch(multirom compatible)
Reclaim RAM for loggers
added fiops io-scheduler
KCAL color control
12/19/15
V4:
Intelliplug 3.9
Linaro GCC 4.9.3
Latest CM12.1 sources
Started from scratch
All current features are available
removed intellidemand
added intellimm
Dynamic Fsync
Power suspend
Kernel NEON mode
High performance audio (192KHz)
optimizations
Check github for more
4/28/15
V5:
SaberMod 6.0
Linux Kernel version 3.4.107
4/29/15
V6:
zzmoove governor added
impulse governor added
5/7/2015
V7:
Underclock CPU to 96MHz
Underclock GPU to 100MHz
Click to expand...
Click to collapse
Downloads:
Download:
V1
V2
V3
V4
V5
V6
V7
Click to expand...
Click to collapse
Thanks:
@Flashhhh @Anas Karbila @attack11 @Niropa @cyanogenmod @YoshiShaPow, If you think I unfairly didn't mention you, PM me.
If you want to build your own kernel, go here: Link
This kernel is tested on CYANOGENMOD 12, 12.1, and BlissPop.
XDA:DevDB Information
[Kernel] [3.4.107] SmoothGKernel V7 [CM12/12.1] [AOSP] [SABERMOD 6.0], Kernel for the Moto G
Contributors
MetalPhoenix45
Source Code: https://github.com/MetalPhoenix45/SmoothGNew/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v7
Created 2015-04-12
Last Updated 2015-05-07
Reserved
Mine....
Q&A
Q: How do I flash this?
A: Install TWRP or any other custom recovery. Download my kernel. Then go to recovery mode. Install>SmoothG.zip>Install it!
Q: No Wifi or won't boot up,
A:Install latest Cyanogenmod 12.1 and if you still have problems, tell me.
What other Q&A's do you wan't? Tell me.
first, yeah!! thanks for bringing up another kernel. will give em a shot very soon.
NeoPreacher said:
first, yeah!! thanks for bringing up another kernel. will give em a shot very soon.
Click to expand...
Click to collapse
Thanks, and please tell me features you'd like me to add to this kernel.
@MetalPhoenix45 Good to see that u finally did it!
Flashhhh said:
@MetalPhoenix45 Good to see that u finally did it!
Click to expand...
Click to collapse
I couldn't have done it without help.
2nd release is out!
Added intelliactive intellidemand and smartmax
MetalPhoenix45 said:
2nd release is out!
Added intelliactive intellidemand and smartmax
Click to expand...
Click to collapse
Nice!,thanks for adding the Govs i tested it and Simple_ondemand GPU causes reboot when confirmed for use on Synapse
-Blisspop 3.0
-UniversalKernelManager 3.8
-Clean Install
- Team Bliss V4A Mod from their site
if you need any more info like logcats or whatnot just tell (pm or reply)
Thank you for this kernel :good: very smooth and stable, good work, congratulations!.
(if you want, you could UC it to 192mhz)
Gpu overclock to 600mhz? I thought 533 was max
eddydc1 said:
Gpu overclock to 600mhz? I thought 533 was max
Click to expand...
Click to collapse
don't think there's a limit, just some gpu's will lose stability at a point. as with all overclocking, your mileage may vary.
neopolitann said:
Nice!,thanks for adding the Govs i tested it and Simple_ondemand GPU causes reboot when confirmed for use on Synapse
-Blisspop 3.0
-UniversalKernelManager 3.8
-Clean Install
- Team Bliss V4A Mod from their site
if you need any more info like logcats or whatnot just tell (pm or reply)
Click to expand...
Click to collapse
Will fix soon, I see the problem.
sfoot13 said:
Thank you for this kernel :good: very smooth and stable, good work, congratulations!.
(if you want, you could UC it to 192mhz)
Click to expand...
Click to collapse
I'll underclock to 100mhz in the next release.
twist3d0n3 said:
don't think there's a limit, just some gpu's will lose stability at a point. as with all overclocking, your mileage may vary.
Click to expand...
Click to collapse
The moto g's GPU didn't lose stability suprisingly, running very smoothly with very few stutters(less than stock). Also, can anyone give me info for battery life, for me its enough, but I want to hear from everyone else.
Going to use sabermod 5.0 after the next build. Thanks @Flashhhh for helping.
MetalPhoenix45 said:
I'll underclock to 100mhz in the next release.
Click to expand...
Click to collapse
Thank you so much! just 1 request more... could be possible add kexec support? :fingers-crossed:
sfoot13 said:
Thank you so much! just 1 request more... could be possible add kexec support? :fingers-crossed:
Click to expand...
Click to collapse
Of course. I'll add it.
My work: SmoothGKernel for the Moto G, and remember always hit the thanks button if anyone helped.
Sorry guys, I wish I could upload sooner, but I'm getting errors and looking for a fix.
Crazy game experience using SmoothGKernel V2, been playing UFC from EA Sports and it's just amazing. My eyes couldn't even keep up because it was so responsive. No disrespect, but I thought there was at least gonna be a lag while tapping the screen, but there was none. SmoothGKernel has a lot of potential for sure.
@MetalPhoenix45 keep up the grea workt!
kijp15 said:
Crazy game experience using SmoothGKernel V2, been playing UFC from EA Sports and it's just amazing. My eyes couldn't even keep up because it was so responsive. No disrespect, but I thought there was at least gonna be a lag while tapping the screen, but there was none. SmoothGKernel has a lot of potential for sure.
@MetalPhoenix45 keep up the grea workt!
Click to expand...
Click to collapse
Thanks, how was battery life?
[url=https://postimages.org/]
[/URL]
This is a home of new re branded yarpiin kernel for Oxygen Os based roms.
Would like to thank to all devs that work has been used to create this kernel.
SO WE STARTING A LIST:
all CREDITS goes to:
@Grarak
@Mahdi786
@Lord Boeffla
@franciscofranco
@ Despair Factor
@ak
@ZaneZam
@varun.chitre15
@flar2
@arter97
@Sultanxda
@eng.stk
@neobuddy89
@Tkkg1994
@frap129
@jcadduono
@savoca
@yank-lu.555
@Dorimanx
@acuicultor
@Maxwen
@bbedward
@nathanchance
@mostafaz
@joshuous
@faux123
@rainforce279
@SuperR. - Awsome ROM Kitchen
@osm0sis - Rom Busybox
@Alucard24
and all others devs that make our lives easier.
Special thanx for @urgali , @Sungfive and @Duncan1982 for testing .
and @Cybertron™ for new thread and signature images .
@Saber for his superb thread with all detailed kernel stuff.
Short Feature list:
KERNEL
Basic Governors plus:
Darkness, Nightmare, Alucard, Impulse, Blu Active
Overclocked both clusters
Adjustable thermal driver
Power Efficient Workqueues
State Notifier Driver
I/o schedulers: fiops, sio, zen, maple
Adrenoboost
Adreno Idler
Simple gpu algorithm
Backlight dimmer
Kacal control
Power Suspend driver
USB Fast Charge
Eagle DTS driver
Built in Busybox
ROM
Magisk Root
Passes SafetyNet Check
De bloated
Busybox
Lineage sms app
Lineage Sounds
Custom wallpalers
AdAway
Substratum
Ozone theme
Powered By White Wolf Kernel
Kernel use a simple free and user friendly kernel control application called Synapse by @AndreiLux for configuration purposes(slightly adding more functionality).
Synapse is included in zip and flashed by default as a system app.
Stand alone kernel use UKM - Lite version. It does contain less settings than standard version for less advanced users. For those who wish to use full power of Synapse additional UKM zip have to be flashed after Kernel.
UKM Full flashable zip download link
https://www.androidfilehost.com/?w=files&flid=154993
Flashing instructions
1. Flash in recovery no black magic
2. If missing tunables for governors set SElinux to permissive
3. Other custom kernel on top of the rom - NO . Why? Kernel is built in the rom so unexpected behavior possible. No support given it such case. Please understand.
Compatibility list:
Kernel have been tested with official and beta Oxygen Os
And Finaly Download Link:
WHITE WOLF KERNEL - https://www.androidfilehost.com/?w=files&flid=233922
WHITE WOLF OS ROM - https://www.androidfilehost.com/?w=files&flid=280710
Source
https://github.com/yarpiin/White-Wolf-OP3-OXY.git
If You like my work buy me a beer https://www.paypal.me/yarpiin
XDA:DevDB Information
White Wolf Rom and Kernel Oxygen Os, Kernel for the OnePlus 3
Contributors
yarpiin
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: WHITE.WOLF.OP3.OXY.O
Stable Release Date: 2017-11-07
Created 2017-05-30
Last Updated 2018-11-30
Reserved
WHITE.WOLF.OP3.OXY - changelog:
https://github.com/yarpiin/White-Wolf-OP3-OXY/blob/master/changelog.txt
Hall Of Fame
This is a list of people who contributed donations to this project or helped in it
Helpers
- @urgali
- @Sungfive
- @Duncan1982
- @Cybertron™
Donators
- @urgali
- @A Sad Napkin
- @real76
- Unknown memeber named Amir
- @ctakah27
Thank you a lot !!!
Signature Image
And another kernel for OP3! Nice! ?
@yarpiin can I flash this on Phoenix rom v4.2 ?
sushobith said:
@yarpiin can I flash this on Phoenix rom v4.2 ?
Click to expand...
Click to collapse
This kernel version is for Oxygen Os , my Lineage based kernel should work on AOSP but wont take any responsibility for any problems
Sent from my OnePlus3 using XDA Labs
yarpiin said:
This kernel version is for Oxygen Os , my Lineage based kernel should work on AOSP but wont take any responsibility for any problems
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Trying this out. [emoji481]
Sent from my ONEPLUS A3003 using Tapatalk
great kernel:good:
Running on latest open beta. All good and smooth. Thank you.
Hi all,
Up to date kernel is up!!
Enjoy
Hi.. Thanks for the wonderful kernel. What configuration do you use?
mokshadenied said:
Hi.. Thanks for the wonderful kernel. What configuration do you use?
Click to expand...
Click to collapse
Im 9n AOSPA rom not oxygen but if you want you can use alucard or nightmare on small cluster and despair on big one underclock slightly and fiops as iosched rest as you wish
Sent from my OnePlus3 using XDA Labs
yarpiin said:
Im 9n AOSPA rom not oxygen but if you want you can use alucard or nightmare on small cluster and despair on big one underclock slightly and fiops as iosched rest as you wish
Click to expand...
Click to collapse
Ok i was using Alucard on both the clusters and CFQ as io scheduler.was butter smooth. will try this combination. Also i used ur kernel before u quit from OOS development. Then u had Alucard hotplug. Any plans of adding again? Another query from what i read CFQ is better for multitasking compared to fiops and fiops has read write issues?
mokshadenied said:
Ok i was using Alucard on both the clusters and CFQ as io scheduler.was butter smooth. will try this combination. Also i used ur kernel before u quit from OOS development. Then u had Alucard hotplug. Any plans of adding again? Another query from what i read CFQ is better for multitasking compared to fiops and fiops has read write issues?
Click to expand...
Click to collapse
There will be no hotplug driver in this kernel as our cpu doesnt hotplug from its nature and noticed that there was no benefits from hotplugging,
FIOPS combined with 2048mb read ahead is best for overal performance ( daily useage , average multitask and stuff like that ) sometimes it can lag but personaly never lagged fo me
Sent from my OnePlus3 using XDA Labs
yarpiin said:
There will be no hotplug driver in this kernel as our cpu doesnt hotplug from its nature and noticed that there was no benefits from hotplugging,
FIOPS combined with 2048mb read ahead is best for overal performance ( daily useage , average multitask and stuff like that ) sometimes it can lag but personaly never lagged fo me
Click to expand...
Click to collapse
Ok..so should I change from 512 to 2048?
Another thing- in blu_spark kernel's governor there is a mode called Fastlane.. enabling and setting values would result in the UX being fluid etc. I experienced kind of better fluidity with both cores on Alucard governor. Does Alucard have something similar to Fastlane incorporated?
Hi All,
I had to add small fix to OXY kernel .
I have re uploaded it version remains unchanged
enjoy
Which governor is better?
kevin_652 said:
Which governor is better?
Click to expand...
Click to collapse
its up to you and personal settings i preffer alucard and nightmare
Sent from my OnePlus3 using XDA Labs
yarpiin said:
its up to you and personal settings i preffer alucard and nightmare
Click to expand...
Click to collapse
Can you implement zzzmove Governor?
kevin_652 said:
Can you implement zzzmove Governor?
Click to expand...
Click to collapse
I can , but for now i prefer kernel as it is.
Sent from my OnePlus3 using XDA Labs
Hi, I've just made a kernel for my Tab 4 8.0 3G SM-T331 and it works amazing (at least for me)
So i think i want to share with you guys
Hope you like it
Features:
Removed samsung rooting restriction
Smartmax cpu governor
Lionheart cpu governor
Wheatley cpu Governor
Intelliplug cpu hotplug
some tweaks i don't know whether or not it will improve performance
otherwise stock
This kernel is not made all by myself, i took some of other devs work and add it to the stock kernel.
samsung for kernel
@faux123 for intelliplug
@osm0sis for anykernel
@klozz for reference in msm8266 underclocking
@TeamMex for reference in msm8266 underclocking
Click to expand...
Click to collapse
I made this kernel just for fun, so don't expect this to be perfect
Download : github(dot)com/williamkosasih19/SM-T331-KERNEL-TOAD/tree/master/Downloads
Source : github(dot)com/williamkosasih19/SM-T331-KERNEL-TOAD
Hi, is there anything that does not work?
B14CKB1RD
Kernel for the OnePlus 3 & 3T
B14CKB1RD Kernel is made with stability and suitability for what uses you want from your phone. I like a happy medium of minimal and just the right amount of features added in as to not be overbloated. As usual happy flashing. Just note i am not responsible if you the user messes up your phone. I will always be around to help in any way i can so if any issues arise please feel free to send me a pm. ABSOLUTELY NO TROLLING, BASHING, OR ARGUING on the post please. Actions will be taken and you will lose my personal support.
Feel Free to Join us on our public Telegram Chat B14CKB1RD Kernel ONePlus 3 & 3T Users
https://t.me/B14CKB1RDOP3
Download For OOS OB12/21 Based:
For Latest OOS build:
Download Here
Click to expand...
Click to collapse
Download For LOS / Custom Based:
For Latest Custom Base build:
Download Here
Click to expand...
Click to collapse
How to Install:
Boot to recovery
Wipe Cache
Wipe Dalvik/ART Cache
Flash Kernel .zip
Reboot to profit
Click to expand...
Click to collapse
Features:
Governors:
Alucard
Blu_Active
Chill
Conservative
Darkness
Electron
Interactive
Ondemand
Performance
ZZMoove
I/O Schedulers:
Bfq
Cfq
Deadline
Fiops
Maple
Noop
Sio
Zen
TCP Congestion Controls:
Bic
Cubic
Highspeed
Htcp
Hybla
Illinois
Lp
Reno
Scalable
Sociopath
Vegas
Veno
Westwood
Yeah
Other:
Built using B14CKB1RD AnyKernel made by Snuzzo
Updated to latest OOS 4.1.7 Base or LOS Base commits
Linux Kernel 3.18.67
Built with gcc UBER 7.1.x toolchain
Adreno Idler
CPU OverClock
GPU OverClock
Input Boost
LZ4 Compressor/Decompressor
F2FS Support
Flar2 Wake & Sleep Gestures
Flar2 Sound Control
Battery Optimizations
Enhanced Power Efficiency
Fast Charge
Wakelock Controls
Adaptive Low Memory Killer
Power Suspend Mode
State Notifier Mode
Kernel Mode Neon
BOEFFLA LED
BOEFFLA TouchKey Control
I/O Sched Switcher
And many more..
Notes::
For maximum stability. Before I flash each update of my kernel, I go to settings>apps>ElementalX-Kernel Manager>storage and wipe the cache and data for it for a fresh new setup. I do this because when and if i do add or remove a feature you set on boot and its not there. it may cause conflict.
If you come across a bug or issue please do not spam the thread. either pm me or reach me on hangouts or g+ by [email protected]
Source:
click here for OOS base kernel source
click here for LOS / Custom base kernel source
Frequently Asked Questions:
Q: Whats your current setup using Elemental X Kernel Manager?
A: My configuration for best performance and battery life:
Governor Little Cluster: Interactive
Governor Big Cluster: ZZMoove
Cpu Boost: (Input Boost Freq) 460 MHz for both and milliseconds to 20
TCP: Sociopath
IO Scheduler: Noop
wakelocks all blocked
Besides enabling a few other small things like boefflas touchkey and flar2's wake gestures everything else i leave AS IS.
Click to expand...
Click to collapse
Credits & Thanks
@Snuzzo (For teaching me all he knows about kernel and his code used on many devices)
@hellsgod (For his support, code, and friendship)
@frap129 (For his specially made 6.3.1 toolchain)
@apophis9283 (For his friendship, help and contributions to android)
@xanaxdroid (For his toolchains)
@buckmarble (For his code and contributions)
@Xileforce (For his code and contributions)
@franciscofranco (For his code, contributions and audio tweaks)
@faux123 (For many of his awesome kernel contributions and code)
@flar2 (For Gesture Wake Controls and Sound Control)
@savoca (For his work and code such as kcal control)
@DespairFactor (For his code and contributions)
@DragonHunt3r (For his code and contributions)
@alucard_24 (For his code and contributions)
@bbedward (For his code and contributions)
@Yoinx (For his awesome work on kernel adiutor and general help)
@RenderBroken (For his code, contributions and his friendship) @Lord Boeffla (For his code and contributions)
@eng.stk (for his code and contributions)
AOSP for having all this a possibility with open source
All Other Developers who make android a great hobby to enjoy
All of my testers and users thank you for keeping me going.
To any other devs i missed...all your work is very much appreciated. if you feel i should put you on the list let me know via pm and ill gladly do so
Reserved for later
Best available kernel for OnePlus 3/3T. We are testing it for months to ensure the ultimate experience for the end user. Enjoy, and thanks for the opportunity! :highfive:
Thanks for kernel
This kernel is dope AF Rev. Great job, brother
Best one out there, couldn't recommend a better one.
The wait is over. The best of the best. Dope stuff right here
bought 1+3T for this kernel
BB FTW \m/
Was waiting for this to release...
Too early to have an opinion ?
2 things I noticed , 1 sometimes execution of an action (opening an app) takes 3 seconds , 2 entropy seems higher than any other kernel...
That said the kernel.makes the OS feels fluid and smooth (OOS)
Edit/ fixed the 1st point (the slow action) by disabling the wq_power_saving, entropy still high i think at 68%
theduke7 said:
Was waiting for this to release...
Too early to have an opinion [emoji846]
2 things I noticed , 1 sometimes execution of an action (opening an app) takes 3 seconds , 2 entropy seems higher than any other kernel...
That said the kernel.makes the OS feels fluid and smooth (OOS)
Edit/ fixed the 1st point (the slow action) by disabling the wq_power_saving, entropy still high i think at 68%
Click to expand...
Click to collapse
I'll play around a bit...there's always a future release
Sent from my ONEPLUS A3000 using Tapatalk
Awesome. Great job rev. Glad that it BB made has a public release
Gonna test now will post back soon!
After install gone wifi. ?????
patoga100 said:
After install gone wifi. ?????
Click to expand...
Click to collapse
What rom or OOS version..because this is 4.1.6 or ob11/20 only as stated in OP...wifi has worked for all my OOS testers
Sent from my ONEPLUS A3000 using Tapatalk
I'm on beta11, but my kernel was elementalx. This is the issue? Go back to Stock, and then flash Yours? Thx
patoga100 said:
I'm on beta11, but my kernel was elementalx. This is the issue? Go back to Stock, and then flash Yours? Thx
Click to expand...
Click to collapse
Yes
patoga100 said:
I'm on beta11, but my kernel was elementalx. This is the issue? Go back to Stock, and then flash Yours? Thx
Click to expand...
Click to collapse
Yes first go back to stock and then flash blackbird kernel.
Some kernels have uninstaller. Check it XDA thread for that.
Do we have aroma installation?
P.S - Welcome to OP3/3T community. Thank you very much for this kernel.
lol.4.ever said:
Do we have aroma installation?
P.S - Welcome to OP3/3T community. Thank you very much for this kernel.
Click to expand...
Click to collapse
No.
darjwx said:
No.
Click to expand...
Click to collapse
OK.
So is this flash and forget type as right now I don't want any type of root in my phone ?
Thanks.