Database Info

[KERNEL][OC][STOCK/CROMI] JB 4.2.1 ★ Hundsbuah ★ 10.6.1.14.10 ★ v3.4.0 ★ BETA v3.4.4

[KERNEL][OC][STOCK/CROMI] JB 4.2.1 ★ Hundsbuah ★ 10.6.1.14.10 ★ v3.4.0 ★ BETA v3.4.4
1Thanks to: _that, sbdags, steveman29 and all testers out here
If you like my work you can donate by clicking the link below:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=BGD8ETXAPXNEQ
Please tell me your xda nickname in the donation!
Donators: steveman29, bads3ctor, Douglas Wing, pastorbob62, Yamir Gonzalez, ziggy71, sbdags, Mackis, Daruniafx, MotoFlasher, tijsva, JoinTheRealms, faustus1005, ubefuct, LetMeKnow
IMPORTANT:
Please always try to undervolt the CPU as much as you can/as its running stable! Less VCORE, less heat, more batterylife!
If you get reboots and/or cpu gov scaling errors, you have undervolted too much!
PLL Calculation Excel:
I have also made a cpu pll calculation excel sheet. there you can calculate your correct M,N values for a specific freq
Download here: http://www29.zippyshare.com/v/35204606/file.html
Printout hexdumps from edp.c:
I also wrote a small c-programm to print out the content of the edp hex-dump.
just copy the hex values from your edp.c in edplimits.c. look in the file and you know how to.
Its an eclipse project.
The output is a file called: edp_entrys.txt
Check out your speedo_id and regulator id and search for it in the .txt file
Download here: http://www58.zippyshare.com/v/40584147/file.html
Source:
Kernel:
https://github.com/Hundsbuah/tf700t_10_6_1_14_4
MyApp:
https://github.com/Hundsbuah/HundsbuahsKernelTweaks
If you dont make any changes to my kernel here my recommendation:
- Use asus batterysaver for (as the name sais: powersaving)
- use asus balanced mode for gaming or heavy loaded apps (this is not oc too much so it wont burn ur hand away)
- use asus normal/performance mode for daily use (surfing, browsing apps, just the normal daily use (except gaming!!)
- if you have our own frequency setting, i recommend for gaming: 1600MHz CPU Quadcore max. and 600MHz GPU max
Need help - Still something unclear?: THX lucius.zen
http://forum.xda-developers.com/showthread.php?t=2232715
Android App for my Kernel:
v2.3
Code:
- init.d file will be created if it not exists before my app is using it (initd error messages should be gone now )
- fixed bug that causes a force close in the cpu uv section when trying to change cpu voltages
[URL]http://d-h.st/fEm[/URL]
v2.4
Code:
- added boot to linux tab (you need the latest beta kernel!! and you need to flash the linux installer zip)
[URL]http://d-h.st/Y3T[/URL]
Linux Installer (needed by my App):
v1.0
Code:
[URL]http://d-h.st/GBy[/URL]
BETA RELEASES JB4.2:
v3.4.1
Code:
- kexec hardboot support
- dynamic fsync added
[URL]http://d-h.st/7jX[/URL]
New app v2.4:
- added boot to linux tab (you need the latest beta kernel!!)
[URL]http://d-h.st/Y3T[/URL]
What do i have to do when i want to boot to linux from your Hundsbuah App?
- Just download this linux installer zip, flash it in recovery and be sure that you are on the latest beta kernel (v3.4.1 from 2013-10-29)
- You can install Linux as a virtual image and use all the default settings during installation!
[URL]http://d-h.st/GBy[/URL]
v3.4.2
Code:
- added a lot of tcp congestions
[URL="http://d-h.st/bXd"] http://d-h.st/bXd[/URL]
v3.4.3
Code:
- added bfq io scheduler
- added sio io scheduler
[URL]http://d-h.st/ACY[/URL]
v3.4.4
Code:
- Removed frequencies from the frequency table: 1.28 Ghz, 1.33 Ghz, 1.37 Gh, 1.54 Ghz
[URL]http://d-h.st/ILo[/URL]
STABLE RELEASES JB4.2:
v3.4.0
Code:
normal+data2sd
(this is kernel is for both versions, normal and data2sd - if you dont install the data2sd patch from below it is working as normal "non data2sd version")
[URL]http://d-h.st/hyD[/URL]
data2sd patch:
Code:
just format the 2nd partition of ur sdcard with ext2 or ext4 and set the 2nd partition as active or boot
install this patch: [URL]http://d-h.st/xbU[/URL]
and use the normal+data2sd kernel from above
big thanks to _that!
Bugs:
- you tell me
Please report any problems / feedback

Will have a quick play today
---------- Post added at 09:56 AM ---------- Previous post was at 09:44 AM ----------
OK first problem this causes DSP manager to continually force close. On CROMI 3.2.2 deodex
---------- Post added at 10:18 AM ---------- Previous post was at 09:56 AM ----------
OK more issues to report I'm afraid. Went into system tuner. Default governor was set to conservative. Changed it to pegasusq and system tuner froze. Then went to the market to update some apps, started downloading and tab rebooted on its own. Had another reboot when it finished loading.
Back to _that 2 kernel and all OK again. This kernel needs a bit more testing mate. Let me know if you need some help.

Hi Hundsbuah,
I'm testing out your latest kernel and found many options for cpu govenor and scheduler. Is it possible you could provide a quick summary for them, so I have an idea how to test and the combo I should be using. Thanks
Govenor:
brazukkabwax
oegasysq
Smartassv2
lulzactive
Schedule:
sio
row
vr
Thanks again.

Re: [KERNEL][OC] Hundsbuah ★ 10.4.4.25
buhohitr said:
Hi Hundsbuah,
I'm testing out your latest kernel and found many options for cpu govenor and scheduler. Is it possible you could provide a quick summary for them, so I have an idea how to test and the combo I should be using. Thanks
Govenor:
brazukkabwax
oegasysq
Smartassv2
lulzactive
Schedule:
sio
row
vr
Thanks again.
Click to expand...
Click to collapse
Learn to search there are multiple threads here on xda that give detailed descriptions of governors, io schedulers, and even tcp congestion algorithms.

ejhart said:
Learn to search there are multiple threads here on xda that give detailed descriptions of governors, io schedulers, and even tcp congestion algorithms.
Click to expand...
Click to collapse
I think it's good to keep all here in this thread. I don't want "technical" details,but a simple common sense for common users. For example:
SmartassV2 - For heavy multi-task users but still save on battery.
Got my point?

buhohitr said:
I think it's good to keep all here in this thread. I don't want "technical" details,but a simple common sense for common users. For example:
SmartassV2 - For heavy multi-task users but still save on battery.
Got my point?
Click to expand...
Click to collapse
i havent tested much atm because i dont have as much time as i wish and my free time is testing new kernel features/versions. but pegasusq and row/vr should run great with also good battery.
brazilianwax is a more aggressiv smartassv2 version.
here are some gov explained:
http://www.alliance-rom.com/community/wiki/governors-explained/

Hundsbuah said:
i havent tested much atm because i dont have as much time as i wish and my free time is testing new kernel features/versions. but pegasusq and row/vr should run great with also good battery.
brazilianwax is a more aggressiv smartassv2 version.
here are some gov explained:
http://www.alliance-rom.com/community/wiki/governors-explained/
Click to expand...
Click to collapse
OK, thanks, I can do the testing myself, not a problem.

I like this thread with explanations, although it is technical in nature:
http://forum.xda-developers.com/showthread.php?t=1369817
And with a search I stumbled onto this one:
http://forum.xda-developers.com/showthread.php?t=1631894
which I have to read myself as well. On first glace much information seems copypasta'd, but hey, you never know.

Hundsbuah,
Thank you for the new update, I have a favor to ask, is it possbile you can make a data2sd version of this kernel? I'm runing data2sd and it's definitely smoother than the regular, I would like to keep the data2sd andn try out with your kernel. I already tried your kernel version 1.2 and it's pretty smooth.

buhohitr said:
... a data2sd version of this kernel?
Click to expand...
Click to collapse
+1
Please incorporate d2sd versions into your releases , at least major updates.
So many TF700 users are now using this mod to help relieve some 'issues' ...

Cpuquiet
Hello Hundsbuah, thanks for your kernel. I posted this in _That's kernel section. I installed a kernel on my HTC ONE X that has nvidia's cpu Cpuquiet driver driver implemented and it makes a huge difference in battery life (20%-30%) without sacrificing performance. I don't know if it can be implemented to tf700t, but it would be great if it did. Here is some info:
http://www.linuxplumbersconf.org/2012/wp-content/uploads/2012/08/cpuquiet.pdf
https://github.com/pboonstoppel/

ive asked mr.muffin/_that if the changes in fstab.cardhu are the only changes to make a data2sd version of the kernel

steveman29 said:
Hello Hundsbuah, thanks for your kernel. I posted this in _That's kernel section. I installed a kernel on my HTC ONE X that has nvidia's cpu Cpuquiet driver driver implemented and it makes a huge difference in battery life (20%-30%) without sacrificing performance. I don't know if it can be implemented to tf700t, but it would be great if it did. Here is some info:
http://www.linuxplumbersconf.org/2012/wp-content/uploads/2012/08/cpuquiet.pdf
https://github.com/pboonstoppel/
Click to expand...
Click to collapse
i have already activated that feature but i have disabled it again (i havent seen any improvements) but i didnt looked at batterylife. i will compile a version with Cpuquiet and send you a pm with the link

Hundsbuah said:
i have already activated that feature but i have disabled it again (i havent seen any improvements) but i didnt looked at batterylife. i will compile a version with Cpuquiet and send you a pm with the link
Click to expand...
Click to collapse
Thanks i will test battery life and will report to you. In my HTC ONE X i have to use fauxclock program to activate cpuquiet. Do you know if it can be activated by a script?
edit: I had 2 reboots with the test kernel. I don't know if it is because of cpuquiet or if you added other features too. I didn't have any reboots with the normal kernel.

steveman29 said:
Thanks i will test battery life and will report to you. In my HTC ONE X i have to use fauxclock program to activate cpuquiet. Do you know if it can be activated by a script?
Click to expand...
Click to collapse
afaik its managed by the kernel and the cpuq gov
steveman29 said:
edit: I had 2 reboots with the test kernel. I don't know if it is because of cpuquiet or if you added other features too. I didn't have any reboots with the normal kernel.
Click to expand...
Click to collapse
just for the others: reboot is fixed with version 1.4.1

Hundsbuah said:
ive asked mr.muffin/_that if the changes in fstab.cardhu are the only changes to make a data2sd version of the kernel
Click to expand...
Click to collapse
Your data2sd version is not working. The data should look like this in the fstab.cardhu file:
/dev/block/mmcblk0p1 /system ext4 noatime,noauto_da_alloc,nodiratime,barrier=0,nobh,ro wait
/dev/block/mmcblk0p2 /cache ext4 noatime,noauto_da_alloc,nosuid,nodev,nodiratime,barrier=0,nobh,errors=panic wait
/dev/block/mmcblk1p2 /data ext4 noatime,noauto_da_alloc,nosuid,nodev,nodiratime,barrier=0,nobh,errors=panic wait,encryptable=footer
/dev/block/mmcblk0p8 /data2 ext4 noatime,noauto_da_alloc,nosuid,nodev,nodiratime,barrier=0,nobh,errors=panic wait,encryptable=footer

i havent released a data2sd version yet
if these are the only changes, give me 5 min i will make an data2sd version
/edit: data2sd version added in first post

Hundsbuah said:
i havent released a data2sd version yet
if these are the only changes, give me 5 min i will make an data2sd version
/edit: data2sd version added in first post
Click to expand...
Click to collapse
I will give it a try and report back. Your kernel is getting better and better, I think it's going to be one of the best custom kernel since Clemsyn. Good work!!

AW: [KERNEL][OC] Hundsbuah ★ 10.4.4.25
buhohitr said:
I will give it a try and report back. Your kernel is getting better and better, I think it's going to be one of the best custom kernel since Clemsyn. Good work!!
Click to expand...
Click to collapse
thank also _that. i read his howto and then i wanted to make my own kernel
Gesendet von meinem ASUS Transformer Pad TF700T mit Tapatalk 2

Re: [KERNEL][OC] Hundsbuah ★ 10.4.4.25
Is this for cm or stock
Sent from my MB865 using xda app-developers app

Best combination of Rom&kernel&settings[for Noobs]*NEW*

Hello Noobs,
I you are confused about which rom to chose?which kernel to install? and which settings to set? here is the best thread to check!
This combination of rom&kernel&settings will:
Boost your CPU performance.
Free more ram.
reduce lag while gaming and multitasking.
saves battery.
So lets start
I- Installing DDMF1:
Download XXKPE from here (thanks to kkrraazzyy).
Make clean install by following the instructions in this thread (thanks to Misledz) .
Download DDMF1 from here (thanks to karthik gowtham for the link).
Install DDMF1 by following the value pack instructions.
II- Installing BAM kernel (best battery saver for DDMF1):
Download PDA_BCK_CF-root_universal_beta14fix.tar from here(thanks to XDA_Bam for his kernel).
Install it using Odin3 v1.85 only in download mode as PDA.
III- Boosting your CPU performance:
Download No-frills CPU Control CLASSIC from the market.
Open No-frills CPU Control CLASSIC and set governor to ondemand and set I/O scheduler to deadline.
Overclock to 1.2 GHz to play heavy games.
Check "Apply on boot"
IV- Free more ram:
use swapper 2 to create a swap file/partition (64 Mb recommended ) and check safe mount and safe unmount and run swapper at startup or you could use the stock task manager to kill running apps.
V- No more LAG!!!!!
there is an app in the market called "Seeder" [Paid], this is the best app to solve the problem of lags (it's easy to use just read the description).
VI- Remove unwanted system apps:
Stock roms are full of unwanted apps (google and samsung apps) and these apps eat your ram so you should get rid of them
So here is the trick:
Downlaod and Install ES explorer (v 1.6 recomended).
Go to settings >> root options >>and check all the options (root permissions are needed).
Go back and then go to Manager >> App Manager >> Category and choose System apps.
Now you can remove any system app (hold your finger on the app and choose Uninstall).
Don't forget to backup your apps before removing them in case you wanted them in the future)
or you can flash DeleteUnwantApp_Cwm.zip through cwm recovery (thanks to rahul_rocks3 for the file)
VII- Swap your SDcard:
This mod is a must have when you want to play games larger than 1.5 Gb so big thanks to LoLaTiOn for this mod (mod is in the attachment, just install SwapSD-APK-GB-DDMF1 through recovery mod).
VIII- Add Arabic support:
Just flash DDMF1_arabic_support.zip through recovery mod in order to add arabic support to your rom ( thanks again to rahul_rocks3 for the file).
Notice: this mod will just add the arabic font to your rom so you still can't write arabic using the stock keyboards unless you install an arabic keyboard from the market.
IX- Increase your battery life:
This simple trick will increase your battery life (about 50%+ or more, strongly recommended for normal use):
Download No-frills CPU Control CLASSIC from the market.
Open No-frills CPU Control CLASSIC and set governor to conservative and set I/O scheduler to noop and Downclock to 800 MHz.
Check "Apply on boot"
If you are going to play games or do some heavy tasks, just use No-frills CPU Control to boost your CPU again
Hope this helped you to figure out which rom is better for you and remember that there is no perfect rom for SL,it depends on your needs,DDMF1 is just the most stable and daily driver

Thanks for the informative post

GeekOrNoob said:
Thanks for the informative post
Click to expand...
Click to collapse
you're welcome

Thank you!
May I suggest you guys check this forum post (Top Droid)? There are some nice tricks there to improve system performance and battery life.

Oops, forgot the link
Here is the above mentioned link: http://forum.xda-developers.com/showthread.php?p=31432291#post31432291
[ Mods: I posted twice because the EDIT/DELETE function is taking ages to load here :/ ]

msxDr0id said:
Thank you!
May I suggest you guys check this forum post (Top Droid)? There are some nice tricks there to improve system performance and battery life.
Click to expand...
Click to collapse
you're welcome bro
thanks for your reply (and thanks to Top Droid)

Even to delete unwanted apps, i have to root, right?

Hi ASMI1,
nice to see people are still using my GB kernel. As DDMF1 is a value pack firmware, I would strongly recommend everyone to use CF-root Universal beta 15. With the beta 14fix kernel, your front camera will be mirrored and some minor bugs might occur. Also, beta 15 might show lower battery consumption since it uses the reworked sync bug fix. I could never really confirm this, though

TheBatman™ said:
Even to delete unwanted apps, i have to root, right?
Click to expand...
Click to collapse
Sorry, this is because /system partition needs R/W permissions in order to remove system apps (located in /system/app folder).

XDA_Bam said:
Hi ASMI1,
nice to see people are still using my GB kernel. As DDMF1 is a value pack firmware, I would strongly recommend everyone to use CF-root Universal beta 15. With the beta 14fix kernel, your front camera will be mirrored and some minor bugs might occur. Also, beta 15 might show lower battery consumption since it uses the reworked sync bug fix. I could never really confirm this, though
Click to expand...
Click to collapse
thanks, I will flash cf-root kernel
I am using your kernel because master dhiru1602 advise me to use it

OT - feel free to remove post
ASMI1 said:
you're welcome bro
thanks for your reply (and thanks to Top Droid)
Click to expand...
Click to collapse
HA! Funny avatar that you have!
(And indeed perfectly express the feelings of some of us ^_^)

Nice
Good one.. Thanks a lot.

[tips and tricks] performance and battery life for android kitkat 4.4.2

As we know we have android kitkat which is one of the best os version for our phone.
by following twicks and trick this we can make it more fluent and responsive i think it will be more helpfull those facing perormance and battery problem
1) ART (ANDROID RUN TIME):
THIS IS ONE OF THE MOST EFFECTIVE WAY TO boost u r phone performance
for me my quadrant score is 3500 with art
>no lag(0 lag)
>faster opening of apps
>more touch response
drawbacks :
>as we change runtime to dalvik to art some apps may crash or may not work specifically Google gapps
solution :
there not complete solution but i go this way all is well till now
art compatible gapps http://d-h.st/hSL
art compatible android app list
http://www.androidruntime.com/list
note: art is not compatible to xposed framework so u have to uninstall xposed
2) unistall xposed :
when you go for customization u prefer xposed framework i had done same thing but when I unistalled all xposed apps and framework phone was super smooth
3) use greenify
this is root app which hibernate all installed apps except system apps so when there is no use of app it gets hibernated so no baground runup of apps so no ram compsution and no battery drain
u will get it on playstore
4) debolting of rom:
debolting of rom will space freeup all u r system and make it faster
remove only application that are safe to remove list is as below
http://forums.androidcentral.com/op...e-apks-their-purpose-safe-not-remove-big.html
to remove app just go to any root browser >system >apps and priv-app folder>delete unnecessary app
5) overclock u r Rom with battery efficient kernel:
As our great developer made cpu gpu oc/uv kernels we can use them for overclocking of rom which definaltely boost performance
this is oc kernel for resurrection remix 4.4 rom kernel but it may work on all roms as i personally used it for cm11 maclaw, beanstalk 4.4 roms except aicp rom by vikasayu where i got boot loop
http://www.androidfilehost.com/?fid=23329332407591111( thanx t4n017)
this kernel great so far in terms of performance and battery life
remember oc is not working on all phone
to tweak cpu speed u can use these apps
> nofrills cpu control ( play store)
> set cpu(play store)
go to app and set max cpu 1250 and min 200
or as per u r wish where u got performance
to tweak gpu u can use this app just flash it via cwm recovary
>novathor settings app
http://www.androidfilehost.com/?fid=23329332407587599 ( thanx t4n017)
go to gpu > set mali low load clockspeed and high load speed to max l.e 680 mhz
so u r gpu will work at full speed
or disable auto boost and set static frequency to 680 mz
Note: more than 680 mhz may cause freezing lagging and screen tearing
6) system tweaks
in cynogenmod there are number of tweaks
1) go to system >performance >enable purging of assets
2)go to system >performance >enable kernel same page merging
3) go to system >development >enable 2d drawing
7) AVOID:
1) don't use any ram booster app
2) don't use any system cleaner
3) don't use any app killer
because u r kitkat don't need this any more
BATTERY TWEAKS:
battery is major problem of cynogenmod 11 (kitkat) it's default thing because these roms are meant for performance so its affect battery than stock roms
but we can reduce heavy battery drainage nd u r phone will withstand 18-20hr
1) odex u r rom
as all stock rom are odexed so they gives performance battery life with less customization
but u can odex ur deodexed cm 11 rom by this script
http://forum.xda-developers.com/showthread.php?t=2527268
download script
go to recocery
install it
reboot phone
go to terminal eluminator
type su>enter>type odex sysapp(odex system app) or frame (odex framework) or all (odex both)
2) use greenify
3) change u r runtime to art
4)debolt u rom
5) go to system>performance >set processor abyssplug max freq:800 min freq: 200 and io schelduler to sio
i personally uses oc kernek with max 1150 min 200/ ondemand/ sioplus but i undervolted the rom
6) undervolt u r rom:
if u r using oc/uv kernel then by using novathorseetinga app u can undervolt kernel and save u r battery
go to novathor settings app > go to cpu> go to cpu voltages and set cpu undervolt as per wish but i personally uses
-25 mv
note: very high undervolting or overvolting may reboots u r phone
7) deep sleep state:
deep sleep state of phone is that when u r phone is in standby mode u.e u r not using it screen is off it goes to sleep but some process are working which cause battery drain u can change that setting
>go to novathor setting app > go to power> set deep sleep to 4
OR
USE galaxy s advance setting app> go to deep sleep stateand set it at 4
at 4 u r phone goes to high deep sleep state so no more battery drain in sleep
note: dont go for deep sleep state 5 phone may be unresponsive u have to reboot it
8) screen filter:
>this is a app on play store which deems brightness of screen backlight which helps us to protects our eyes and again on amoled screen reduces battery drain too
> personally used and voila very effective
> u can easily control filter in status bar as it has stausbar notificaton when u are outdoor just increse its percentage and when u are indoore just reduceit manually as per u r wish where u got best result
>download it at play store
once again if u have more suggestions then plz mention here so we have best set up our beloved sgs advance for
performance and battery life

Nice
Sent from my GT-I9070 using xda app-developers app
---------- Post added at 09:08 PM ---------- Previous post was at 09:04 PM ----------
& good job :thumbup:
Sent from my GT-I9070 using xda app-developers app

Omer89 said:
Nice
Sent from my GT-I9070 using xda app-developers app
---------- Post added at 09:08 PM ---------- Previous post was at 09:04 PM ----------
& good job :thumbup:
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Good job bro, keep posting "nice" "cool" and things like that. You'll reach the 10 limit posts soon!! :good:
Yes, I was being sarcastic.

t4n017 said:
Good job bro, keep posting "nice" "cool" and things like that. You'll reach the 10 limit posts soon!! :good:
Yes, I was being sarcastic.
Click to expand...
Click to collapse
i am too glad that u liked this thnx bro.

Super cool tips bro!
I hope the app killers, cache cleaners and ram booster apps will become obsolete with KitKat!:good:

App killers, cache cleaners and ram boosters have been obsolete since at least froyo where android "learned" how to take care for itself. It's only got better since then.

nice bro.. good tips n solved my battery problems.

Uninstall all xposed apps and use greenify? Im confused...

@ortek donation version of greenify is related to xposed framework to hibernate system apps but there is no need to hibernate system apps because some process must be runed by Android os as they are necessary
so don't be confuse i have mentioned here about oridinary version of greenify

So if i want to use greenify i shouldnt install xposed?

ortek said:
So if i want to use greenify i shouldnt install xposed?
Click to expand...
Click to collapse
yesvu don't need xposed for greenify

Thanks for the tip :highfive:

akhil8 said:
Thanks for the tip :highfive:
Click to expand...
Click to collapse
just press thanx button if u can ?

walpanmad said:
just press thanx button if u can ?
Click to expand...
Click to collapse
i did :good:

walpanmad said:
As we know we have android kitkat which is one of the best os version for our phone.
by following twicks and trick this we can make it more fluent and responsive i think it will be more helpfull those facing perormance and battery problem
1) ART (ANDROID RUN TIME):
THIS IS ONE OF THE MOST EFFECTIVE WAY TO boost u r phone performance
for me my quadrant score is 3500 with art
>no lag(0 lag)
>faster opening of apps
>more touch response
drawbacks :
>as we change runtime to dalvik to art some apps may crash or may not work specifically Google gapps
solution :
there not complete solution but i go this way all is well till now
art compatible gapps http://d-h.st/hSL
art compatible android app list
http://www.androidruntime.com/list
note: art is not compatible to xposed framework so u have to uninstall xposed
2) unistall xposed :
when you go for customization u prefer xposed framework i had done same thing but when I unistalled all xposed apps and framework phone was super smooth
3) use greenify
this is root app which hibernate all installed apps except system apps so when there is no use of app it gets hibernated so no baground runup of apps so no ram compsution and no battery drain
u will get it on playstore
4) debolting of rom:
debolting of rom will space freeup all u r system and make it faster
remove only application that are safe to remove list is as below
http://forums.androidcentral.com/op...e-apks-their-purpose-safe-not-remove-big.html
to remove app just go to any root browser >system >apps and priv-app folder>delete unnecessary app
5) overclock u r Rom with battery efficient kernel:
As our great developer made cpu gpu oc/uv kernels we can use them for overclocking of rom which definaltely boost performance
this is oc kernel for resurrection remix 4.4 rom kernel but it may work on all roms as i personally used it for cm11 maclaw, beanstalk 4.4 roms except aicp rom by vikasayu where i got boot loop
http://www.androidfilehost.com/?fid=23329332407591111( thanx t4n017)
this kernel great so far in terms of performance and battery life
remember oc is not working on all phone
to tweak cpu speed u can use these apps
> nofrills cpu control ( play store)
> set cpu(play store)
go to app and set max cpu 1250 and min 200
or as per u r wish where u got performance
to tweak gpu u can use this app just flash it via cwm recovary
>novathor settings app
http://www.androidfilehost.com/?fid=23329332407587599 ( thanx t4n017)
go to gpu > set mali low load clockspeed and high load speed to max l.e 680 mhz
so u r gpu will work at full speed
or disable auto boost and set static frequency to 680 mz
Note: more than 680 mhz may cause freezing lagging and screen tearing
6) system tweaks
in cynogenmod there are number of tweaks
1) go to system >performance >enable purging of assets
2)go to system >performance >enable kernel same page merging
3) go to system >development >enable 2d drawing
7) AVOID:
1) don't use any ram booster app
2) don't use any system cleaner
3) don't use any app killer
because u r kitkat don't need this any more
BATTERY TWEAKS:
battery is major problem of cynogenmod 11 (kitkat) it's default thing because these roms are meant for performance so its affect battery than stock roms
but we can reduce heavy battery drainage nd u r phone will withstand 18-20hr
1) odex u r rom
as all stock rom are odexed so they gives performance battery life with less customization
but u can odex ur deodexed cm 11 rom by this script
http://forum.xda-developers.com/showthread.php?t=2527268
download script
go to recocery
install it
reboot phone
go to terminal eluminator
type su>enter>type odex sysapp(odex system app) or frame (odex framework) or all (odex both)
2) use greenify
3) change u r runtime to art
4)debolt u rom
5) go to system>performance >set processor abyssplug max freq:800 min freq: 200 and io schelduler to sio
i personally uses oc kernek with max 1150 min 200/ ondemand/ sioplus but i undervolted the rom
6) undervolt u r rom:
if u r using oc/uv kernel then by using novathorseetinga app u can undervolt kernel and save u r battery
go to novathor settings app > go to cpu> go to cpu voltages and set cpu undervolt as per wish but i personally uses
-25 mv
note: very high undervolting or overvolting may reboots u r phone
7) deep sleep state:
deep sleep state of phone is that when u r phone is in standby mode u.e u r not using it screen is off it goes to sleep but some process are working which cause battery drain u can change that setting
>go to novathor setting app > go to power> set deep sleep to 4
OR
USE galaxy s advance setting app> go to deep sleep stateand set it at 4
at 4 u r phone goes to high deep sleep state so no more battery drain in sleep
note: dont go for deep sleep state 5 phone may be unresponsive u have to reboot it
8) screen filter:
>this is a app on play store which deems brightness of screen backlight which helps us to protects our eyes and again on amoled screen reduces battery drain too
> personally used and voila very effective
> u can easily control filter in status bar as it has stausbar notificaton when u are outdoor just increse its percentage and when u are indoore just reduceit manually as per u r wish where u got best result
>download it at play store
once again if u have more suggestions then plz mention here so we have best set up our beloved sgs advance for
performance and battery life
Click to expand...
Click to collapse
The given kernel link is dead
Can you please give another link?

akhil8 said:
i did :good:
Click to expand...
Click to collapse
That is old stuff use this kernel good in all aspect
Its boot img file
Just paste in u r rom via windows pc :-do not unpack repack u r desired rom just open it by double clicking and then paste boot img
Dirty Flash this modified rom via cwm recovery
Download link
https://docs.google.com/file/d/0B2_vOo99DI_vemFXYmpreV9hemM/edit?usp=docslist_api

walpanmad said:
That is old stuff use this kernel good in all aspect
Its boot img file
Just paste in u r rom via windows pc :-do not unpack repack u r desired rom just open it by double clicking and then paste boot img
Dirty Flash this modified rom via cwm recovery
Download link
https://docs.google.com/file/d/0B2_vOo99DI_vemFXYmpreV9hemM/edit?usp=docslist_api
Click to expand...
Click to collapse
Thanks for ypur help
Can i install this kernel on RR rom?
If not, Can you suggest me which kernel would be better for RR?
Thanks in Advance

@Ragwan yes it will work with rr rom( kitkat version only)
But keep nandroid backup if any thing goes wrong
I think given kernel link it's kernel of letest pa 4.4 rom its built with gcc 4.7 any fast and smooth no lag anymore.
Again if u want to try then use boot img of liquid smooth 3.2 its gcc 4.9 sabermod fast and smooth but i felt some reboots works great with Abysplug governor
Sent from my GT-I9070 using xda premium

In op you say about "CPU undervolt, bit in novathor setting i can undervolt only gpu....
So, CPU or GPU undervolting?

walpanmad said:
@Ragwan yes it will work with rr rom( kitkat version only)
But keep nandroid backup if any thing goes wrong
I think given kernel link it's kernel of letest pa 4.4 rom its built with gcc 4.7 any fast and smooth no lag anymore.
Again if u want to try then use boot img of liquid smooth 3.2 its gcc 4.9 sabermod fast and smooth but i felt some reboots works great with Abysplug governor
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
When i install this kernel on RR rom, it gives a bootloop.
Can you give me ULTRA kernel link?

[DISCONTINUED][CM-11-20160111][KERNEL][10-02-2016] MF Kernel v1.0

I had sold my Nokia X2 and stop support for Nokia X2
Hi all! Today, i was built a kernel with some tweak
and now i will share it to you
MK Kernel v1.0
Code:
Only for CM-11-20160111
Code:
Tweak:
-Added some CPU Governor: intellimm, intelliactive, optimax, intellidemand, conservative
-Added some I/O Scheduler: sio, zen, vr, fifo, sioplus
Code:
Download: [URL="http://d-h.st/AWXy"]http://d-h.st/AWXy[/URL]
Code:
Flashing:
download the .img, reboot to recovery, select: Install > Image > choose .img>Boot> slide right to flash > reboot system and enjoy
about CPU Governor and I/O Scheduler, read here for more information
Thanks to @zombah
Kernel version: 3.4.110
Compiled with Sabermod 4.7 Toolchain
Source: https://github.com/cm-nokia-x2

Up

Add some features to it, like double-tap to wake up support,init.d support,

is it good ???
how I can install it

Thanks bro

Wölveîne said:
Add some features to it, like double-tap to wake up support,init.d support,
Click to expand...
Click to collapse
of course. i'm trying to add this https://github.com/ryanaepple/android_kernel_motoe/commit/080003bc8e61349bf7c8da00fa6923f3c84d1927

Good Work! +Smartv2 governor

Could I flash this kernel for xperience ROM? Would I be able to get any benefits?

kaotd99 said:
of course. i'm trying to add this https://github.com/ryanaepple/android_kernel_motoe/commit/080003bc8e61349bf7c8da00fa6923f3c84d1927
Click to expand...
Click to collapse
Thnx,and make it more advance
And our kernal supports init.d? Or not

Wölveîne said:
Thnx,and make it more advance
And our kernal supports init.d? Or not
Click to expand...
Click to collapse
cm11's kernel is already support init.d. we don't need to add it more

kaotd99 said:
cm11's kernel is already support init.d. we don't need to add it more
Click to expand...
Click to collapse
Oky,then is it possible to get Native Move To Sd support via some modifications?

whether it can for another rom-based CM11?

user explaination please :cyclops::cyclops:

So whats now?,there's a new build 13 available-you need to recompile kernel for this build.and also viperfx,dolby digital plus too as in the new version there are several fixes in the framework!!

Wölveîne said:
So whats now?,there's a new build 13 available-you need to recompile kernel for this build.and also viperfx,dolby digital plus too as in the new version there are several fixes in the framework!!
Click to expand...
Click to collapse
in build no 13 I have tried DDP v2 and the old mod of disable internal memory and it did work for me

any one help me please
how I install this

sweezit92 said:
in build no 13 I have tried DDP v2 and the old mod of disable internal memory and it did work for me
Click to expand...
Click to collapse
It will work but there is a probability of low performance, bcz there are new framwork service. Jar etc if we flash old then it will be mixed with our new update.mixing old part of system with new ,not good

Wölveîne said:
It will work but there is a probability of low performance, bcz there are new framwork service. Jar etc if we flash old then it will be mixed with our new update.mixing old part of system with new ,not good
Click to expand...
Click to collapse
Yes i agree but as long we dont have updated file we cant use those features......that is why i mix these things
---------- Post added at 05:33 AM ---------- Previous post was at 05:32 AM ----------
Saged 22 said:
how I install this
Click to expand...
Click to collapse
Your question is not clear buddy....there are whole lot of things to install so which thing you want to install?

My SD card Could not be detected after I flashed this kernel?

shafiaszad said:
My SD card Could not be detected after I flashed this kernel?
Click to expand...
Click to collapse
use it without disable internal memory mod!

Any way to overclock GPU ?

i use Kernel auditor for CPU modifications ...is there any such way for GPU ??

May be cyclox kernel in ROM thread can help if you have not tried. However, i think we can only set to higher values for CPU if kernel supports but GPU can only be set to lower values or the max set but not overclocked.

shashank1320 said:
May be cyclox kernel in ROM thread can help if you have not tried. However, i think we can only set to higher values for CPU if kernel supports but GPU can only be set to lower values or the max set but not overclocked.
Click to expand...
Click to collapse
Yeah... I meant d max set.... Kernel auditor made my phone smooth but still animations r stuttering.... I asked d same thing in cyclox kernel thread.... Waiting for dev response

shashank1320 said:
May be cyclox kernel in ROM thread can help if you have not tried. However, i think we can only set to higher values for CPU if kernel supports but GPU can only be set to lower values or the max set but not overclocked.
Click to expand...
Click to collapse
Yeah... I meant d max set.... Kernel auditor made my phone smooth but still animations r stuttering.... I asked d same thing in cyclox kernel thread.... Waiting for dev response

sreekantt said:
Yeah... I meant d max set.... Kernel auditor made my phone smooth but still animations r stuttering.... I asked d same thing in cyclox kernel thread.... Waiting for dev response
Click to expand...
Click to collapse
Hope he respond on that. Anyway GPU is fine for this phone and OC may or may not impact battery as well

Any luck?

BELIEVER PK said:
Any luck?
Click to expand...
Click to collapse
not yet bro

sreekantt said:
Yeah... I meant d max set.... Kernel auditor made my phone smooth but still animations r stuttering.... I asked d same thing in cyclox kernel thread.... Waiting for dev response
Click to expand...
Click to collapse
Can u suggest me what values to give in the max frequency and min frequency. Nd also stock frequency is 2.1 GHz, which doesn't seem to increase. How to increase that frequency from 2.1 to something higher. Thanks in advance.

Rishav Nath Pati said:
Can u suggest me what values to give in the max frequency and min frequency. Nd also stock frequency is 2.1 GHz, which doesn't seem to increase. How to increase that frequency from 2.1 to something higher. Thanks in advance.
Click to expand...
Click to collapse
If u really want max performance at the expense of battery
Just set CPU governor to perfomance mode....it will be in interactive mode by default....change all the 8 cores to perfomance- no need to play with frequency values.
But this isn't needed at all after latest cyclox kernel update
Here is the process i followed which made my phone buttery smooth maintaining the battery life
1. Flash latest Cyclox kernel (download from attachment or the thread if u can find it)
New GPU governor would be automatically activated which makes the animations smooth
2. i wasn't still satisfied with performance as it was lagging after a day or two if we don't reboot. If u r satisfied- No need to follow next step.
3. Root with Magisk - Flash run time optimization(ART optimization) module in recovery
Clear Cache & Dalvik Cache- Reboot
this worked like magic on my device
4. If u face any issues with ART optimization module...i have attached uninstaller too, if u have any connectivity or crashing issues which is unlikely as we r on same device - just in case - have attached crashfix.zip file(only use if u have problem with main moule)
Kernel & Module thread links - Download appropriate kernel file from thread if u r not on stock
https://forum.xda-developers.com/honor-6x/development/kernel-cyclox-kernel-honor-6x-t3676919
ART optimization thread link- they're few more advanced settings mentioned in this thread if u want to play with it - Default setting which is set to 'Speed' was sufficient for me.
https://forum.xda-developers.com/apps/magisk/module-android-runtime-optimization-t3596559
Thanx to developers for their wonderful work

sreekantt said:
If u really want max performance at the expense of battery
Just set CPU governor to perfomance mode....it will be in interactive mode by default....change all the 8 cores to perfomance- no need to play with frequency values.
But this isn't needed at all after latest cyclox kernel update
Here is the process i followed which made my phone buttery smooth maintaining the battery life
1. Flash latest Cyclox kernel (download from attachment or the thread if u can find it)
New GPU governor would be automatically activated which makes the animations smooth
2. i wasn't still satisfied with performance as it was lagging after a day or two if we don't reboot. If u r satisfied- No need to follow next step.
3. Root with Magisk - Flash run time optimization(ART optimization) module in recovery
Clear Cache & Dalvik Cache- Reboot
this worked like magic on my device
4. If u face any issues with ART optimization module...i have attached uninstaller too, if u have any connectivity or crashing issues which is unlikely as we r on same device - just in case - have attached crashfix.zip file(only use if u have problem with main moule)
Kernel & Module thread links - Download appropriate kernel file from thread if u r not on stock
https://forum.xda-developers.com/honor-6x/development/kernel-cyclox-kernel-honor-6x-t3676919
ART optimization thread link- they're few more advanced settings mentioned in this thread if u want to play with it - Default setting which is set to 'Speed' was sufficient for me.
https://forum.xda-developers.com/apps/magisk/module-android-runtime-optimization-t3596559
Thanx to developers for their wonderful work
Click to expand...
Click to collapse
Thanks a lot for helping me out. I've just rooted my Honor 6x. So was exited about it and trying out new things. I successfully flashed the Dolby Atmos and its working fine.