Database Info

[Q] Help Need for my Samsung S4 Mini

Hi guys i've got my phone rooted according to the instruction
WARNING! ONLY USE THIS ON THE GT-I9195 MODEL!
Hello all S4 Mini owners!
I'm happy to finally release ClockworkMod recovery and an insecure kernel for the GT-I9195. With these two installed on your device, obtaining root is easy.
Attached to this post is the necessary files needed for this task. Download the following files:
•Odin_v3.09.zip (if don't have it already)
•recovery-clockwork-6.0.3.7-serranoltexx.tar.zip
• GT-I9195_RootKit_v2.zip
Extract recovery-clockwork-6.0.3.7-serranoltexx.tar.zip file to your computer.
The procedure is as:
1.Copy the "GT-I9195_RootKit_v2.zip" to your device SD card.
2.Turn off the phone.
3.Press and hold home, volume down and power. Download screen should appear.
4.Connect USB cable, and press volume up.
5.Start Odin, uncheck "F. Reset Time", and then click AP button.
6.Select "recovery-clockwork-6.0.3.7-serranoltexx.tar.md5" file that you previously extracted, and press Start button. The phone will reboot when finished.
7.After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode.
8.Select the option to install the ZIP file you have previously copied to your device and begin flashing it.
9.After flashing using CWM, reboot into system and enjoy your rooted device.
To get rid of the the warnings about applications doing not permitted actions, delete the following files from system/app
•KNOXAgent.apk
•KNOXStore.apk
•ContainerAgent.apk
and i could not find out where is are this 3 APK hiding at so i decided to reset it back to factory setting but this problem still persist which comes this message:
"Device Information :
The device as detected an application attempting unpermitted actions. To protect your device, it is recommended you reboot."
anyone got anyidea how to find this 3 apk please?

Or how i can revert it back to factory settings without it popping out again ?

Have de same problem!
blink4r said:
Or how i can revert it back to factory settings without it popping out again ?
Click to expand...
Click to collapse
Hey friend i have the same problem too, i am still looking for a solution, but if you want to revert it back what you can do is re install the room using Odin, you will have the phone like brand new but without root..... if you find a solution a would apreciate if you share, i will tell you if i find something!!

Actually found this... No credit goes to me I'm just passing the info along...
How to disable ANNOYING messages "DETECTION Information":
Using TITANIUM BACKUP and FREEZING app called SEAndroid.apk DOESN'T WORK PROPERLY!!
DO NOT USE IT, YOUR SYSTEM WILL GO BACK TO CUSTOM AFTER SOME TIME!!! NOT RECOMMENDED!!!!
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Use File Manager with root explorer instead and mount SYSTEM as WRITABLE.
2. Go to: /data/data/ look for com.sec.knox.seandroid and rename it to 000.knox.seandroid or whathever you wish.. Same thing applies to com.sec.knox.store
3. Go to: /system/app/ and DELETE: KNOXAgent.apk, KNOXAgent.odex, KNOXStore.apk, KNOXStore.odex
updated:
After few hours of testing (MDL), and all updates there was NO messages at all!!
!!!SOLVED!!!
Click to expand...
Click to collapse
This work fine for my, there is the tread if you need it: http://forum.xda-developers.com/showthread.php?p=41469230
Root browser (that i used) from the store: https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree&hl=bg
Good luck!

[Q] i cant copy and paste since i rooted my tab...help!

Okay first, it will suffice to say im a noob(heard that for the first time here)....
Some months ago usi the directions i saw here, i rooted my device, all has been well until i noticed repeatedly that i could not copy and paste....pls help!

Being a noob myself, I can't give much help, but I have had mine refuse to copy a file unless I put it into a folder and copy the folder over to the device. Once it is on the device it will copy the file from the folder to wherever I want on the device.

chuksmarve said:
Okay first, it will suffice to say im a noob(heard that for the first time here)....
Some months ago usi the directions i saw here, i rooted my device, all has been well until i noticed repeatedly that i could not copy and paste....pls help!
Click to expand...
Click to collapse
Maybe there is something wrong with the rom or recovery, try to clean flash the devices with the newest rom/recoveries.

I had this exact same issue and after fixing this issue once, I haven't gotten it again.
You have 2 options;
1) Factory Restore your device
2) ROOT your device, install ROOT Explorer, navigate to / > data > clipboard, select ALL and delete all, than go into your Settings > Applications Manager > All, look for TestServices, than remove updates/clear data. Reboot and everything should be fine.
I opted for option 2 simply because restoring a device sucks and I wanted to root anyways because I missed AdFree, ROOT Explorer, and could not stand the WIFI Notification.

Asus The New PadFone Infinity (A86) aka PadFone Infinity 2 Thread

Hi,
Since I didn't find a thread for The New PadFone Infinity (A86) aka PadFone Infinity 2, decided to create this thread.
Hopefully this top device gets noticed by developers.

Any MOD for audio? Low handset speaker volume?
As you might noticed, the speaker volume (notifications, ringtones, etc.) of NPFI handset is pretty low even when all volume sliders are maxed out and audio wizard is set to "Music".
I have a rooted device and installed Alsa Mixer from Play Store and tweaked the parameter "RX7 Digital Volume" from within the app. Changed default value of 85 to 100 and was pleased to get a noticeably louder speaker volume. Problem is that the value resets almost instantly and volume level gets back to its default value. Probably because Alsa Mixer installs its own audio driver (alsa amixer) which uses a separate system for assigning values and there is a protection system in place by Asus I think.
I also played with parameters in files below (residing in /system/etc/snd_soc_msm) - tweaked the RX7, RX1, RX2, etc...
snd_soc_msm_Taiko
snd_soc_apq_Taiko_DB
snd_soc_msm_Taiko_CDP
snd_soc_msm_Taiko_Fluid
snd_soc_msm_Taiko_Liquid
saved and reboot, but it didn't make a difference. So anyone has any idea to share?
P. S. As far as I know the audio engine for NPFI is designed by Wave and is called MaxxAudio, Is it possible that it has something to do with that?

Thank you for making much needed forum.
Hopefully soon there will be gathered all the essentials.
---------- Post added at 01:21 PM ---------- Previous post was at 12:41 PM ----------
Hello, friends!
There is good news.
After phone repair service center ASUS found a new firmware WW_A86-10.12.3.116-20140116.
Our friend was surprised at first, but then found the firmware in the phone memory. )))
Keep greetings from Russia.
Thanks Russian carelessness...
https://drive.google.com/file/d/0B8FPN1MGNiJcbWVoQ2dnRVFGaEE/edit?usp=sharing
On the site it is not!
changes:
1. Kernel (16.01.2014)
2. Camera + gadgets
3. Test more ...
PS
Let there be a also here and UL-A86-WW-10123111:
https://drive.google.com/file/d/0B8FPN1MGNiJcWnZJZFhuNGUxRVk/edit?usp=sharing
:highfive:

AlexHer said:
Thank you for making much needed forum.
Hopefully soon there will be gathered all the essentials.
---------- Post added at 01:21 PM ---------- Previous post was at 12:41 PM ----------
Hello, friends!
There is good news.
After phone repair service center ASUS found a new firmware WW_A86-10.12.3.116-20140116.
Our friend was surprised at first, but then found the firmware in the phone memory. )))
Keep greetings from Russia.
Thanks Russian carelessness...
https://drive.google.com/file/d/0B8FPN1MGNiJcbWVoQ2dnRVFGaEE/edit?usp=sharing
On the site it is not!
changes:
1. Kernel (16.01.2014)
2. Camera + gadgets
3. Test more ...
PS
Let there be a also here and UL-A86-WW-10123111:
https://drive.google.com/file/d/0B8FPN1MGNiJcWnZJZFhuNGUxRVk/edit?usp=sharing
:highfive:
Click to expand...
Click to collapse
hi there, thanks for the update :good:

Hmm nothing major...
I wonder why the New Padfone Infinity has to wait the longest to get the latest version of Android...

Kingoapp
Kingoapp worked ok for me for root.
I had to reboot phone and a PC after a driver install, but that's ok.
Is there a sub forum for PadFones? Would be nice to have a place for this stuff.
There are some other places for PFs.
http://padfoneclub.com/pl/forum/forum.php

ilmawi said:
Kingoapp worked ok for me for root.
I had to reboot phone and a PC after a driver install, but that's ok.
Is there a sub forum for PadFones? Would be nice to have a place for this stuff.
There are some other places for PFs.
http://padfoneclub.com/pl/forum/forum.php
Click to expand...
Click to collapse
This is not a place for advertisement for forums or products, especially for suspicious applications such as "kingo" root.

the button beside home button is not working
my padfone is asus padfone t004 .. before i recently updated, everything was fine. After i updated, (version 4.2.2, not sure if it was really updated or not) something went wrong.. The phone is all fine, but when i insert it into the pad, the button beside the home button on the right is not working (sorry i dont know what they call the button as). anyone has this issue? or already fixed this issue? please help !

simmonghuat said:
my padfone is asus padfone t004 .. before i recently updated, everything was fine. After i updated, (version 4.2.2, not sure if it was really updated or not) something went wrong.. The phone is all fine, but when i insert it into the pad, the button beside the home button on the right is not working (sorry i dont know what they call the button as). anyone has this issue? or already fixed this issue? please help !
Click to expand...
Click to collapse
The new update 10.12.3.130 has a bug. Apparently Asus is working to fix the bug. Don't panic. Hopefully a bug fix will be released soon.

Now I wonder how ASUS ZenFone 6 works...

Still waiting on that 130 fix... wondering if there just ignoring it and going to wait until ZenUI is ready

djleez82 said:
Still waiting on that 130 fix... wondering if there just ignoring it and going to wait until ZenUI is ready
Click to expand...
Click to collapse
I must say I share your doubt. Possibly they are working on KitKat for NPFI, and ignoring the fix for now. Disappointing customer support management!

Its a shame that theres no developer support for the A86. Such a great device with no custom roms

KIT KAT Released for NPFI
Finally Asus released firmware update 11.2.5.12 for NPFI which updates its android version to 4.4.2
Download links are available at Support section of your device in Asus website.

Yes, I downloaded it and had mine updated, mine you all, 4.4.x has a known issue, that is all 3rd party apps cannot write to external SD, unless you root it and apply the fix, then either leave it as rooted or unroot it again.

Root 4.4.2 - Build: 11.2.5.26 (TW)
Hi
Just got one of these and it has recently updated from .20 to .26 and now I cant root it? Any ideas?
Is there a way of downgrading back to .20?
Thanks

Check out this thread. Has all info for rooting on all firmwares
http://www.padfoneclub.com/pl/forum/forum_viewtopic.php?15727
I achieved root with RootÖúÊÖ. I just uninstallede kingroot and used supersu instead

dagstar said:
Hi
Just got one of these and it has recently updated from .20 to .26 and now I cant root it? Any ideas?
Is there a way of downgrading back to .20?
Thanks
Click to expand...
Click to collapse
djleez82 said:
Check out this thread. Has all info for rooting on all firmwares
http://www.padfoneclub.com/pl/forum/forum_viewtopic.php?15727
I achieved root with RootÖúÊÖ. I just uninstallede kingroot and used supersu instead
Click to expand...
Click to collapse
I'm with .26 WW and still can't reach root.
@djleez82 can you explain briefly how this chinese tool works? I mean, how can I reach root with that. Thanks!

Rooting Firmware 12.4.0.59 - Android 5.0.2 - A86
This post is copied from my own thread in padfoneclub.com so there is no case of stealing
If you want to copy this post on other forums please do not forget to give due credits to original poster.
Disclaimer! The procedure described below has the potential of rendering your phone useless if not followed properly. I DO NOT ACCEPT ANY RESPONSIBILITY WHAT SO EVER, IF YOU BRICKED YOUR PHONE WHILE PERFORMING THIS PROCEDURE. PROCEED AT OWN RISK!
This method is tested by downgrading firmware 12.4.0.59 to 11.2.5.26, which in turn needs a factory reset/ wipe data/ cache/ afterwards. Before anything else back up your important data (ie. contacts, messages, app data, etc) to some place safe outside your phone. ORIGINAL RECOVERY of your phone will be replaced by TWRP recovery
Preparation: (BEFORE ANYTHING REMOVE YOUR SIM CARD AND MICRO SD)
1. You must have USB debugging enabled, allow mock locations (developer options menu in settings)
2. You must have UNKNOWN SOURCES enabled (security menu in settings)
3. To be on the safe side I recommend you disable VERIFY APPS OVER USB, in developer options menu. You can re enable everything after the job is done.
4. You need to download firmware 11.2.5.26, and 12.4.0.59 according to your phone SKU and save it on your computer.
5. Download WINRAR or any archiving software which is able to modify zip files and install it on your computer.
6. Download unofficial TWRP ver 2.7.1.1 ONLY from this link, and save to your computer
7. Download BETA SUPER SU 2.49 from here, and save it to your computer.
8. If you are on firmware, 11.2.5.26, or 11.2.5.30 and rooted you are half way done, if not either you have to upgrade or downgrade depending on the firmware that now you are on. For example if you already upgraded to 12.4.0.59 you need to downgrade first and root, then proceed. There's a thread in padfoneclub which comprehensively discusses way to root Kit Kat firmware so I skip to just explaining downgrade procedure from 12.4.0.59.
9. To downgrade from 12.4.0.59 to 11.2.5.26, you do it in the usual way from recovery except you need to factory reset/wipe data/ wipe cache via recovery beforehand. REMEMBER TO REMOVE YOUR MICRO SD FIRST AND THEN WIPE OR YOU MAY LOSE YOUR DATA ON MICRO SD AS WELL! After wipe, reboot your phone and place the 11.2.5.26 zip in the root of your sd card by transferring downloaded zip from your PC.
10. Downgrade by choosing "apply update from sd card menu item" in recovery and selecting the zip file you just transferred to your phone. Remember to have at least 70% charge on your battery before downgrade or upgrade.
11. After the downgrade process completes your phone reboots, if it is stuck in ASUS logo for a long time (more than 10 min), switch off your phone by pressing and holding power button. Then reboot into recovery again do another factory reset / wipe data / wipe cache and reboot again. Now everything will be OK and your phone boots to initial KK setup. proceed until you are on the home screen. reboot your phone again.
12. make sure that items explained in step 1-3 are checked and unchecked accordingly.
13. Root your phone by your desired method.
NOW THE IMPORTANT STEPS TO UPGRADE TO A ROOTED ANDROID L 12.4.0.59
1. On your PC replace the "recovery.img" in the zip file for Firmware 12.4.0.59 with TWRP recovery that you just downloaded. Both have the same name and it is a simple case of drag and drop into zip file.
2. Now you have 3 important file:
- The modified 12.4.0.59
- The TWRP recovery you downloaded (recovery.img)
- The beta Super SU 2.49
Copy all 3 file to the root of your sd card in your phone.
3. Install "Terminal Emulator" from Play Store, open the terminal and give it root permissions if needed.
4. Type su
5. Then type
Code:
dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery bs=4096; sync;
(you can copy paste to rule out any typing mistake)
6. After executing the command a number of bytes transfers and the results will display in terminal window. close the window and reboot into recovery as usual, except this time you have TWRP recovery instead of original Asus recovery.
7. Go to "Install" button and select the modified 12.4.0.59 from your sdcard, uncheck "zip file signature verification" then "add more zips" and select beta super su 2.49. zip as well, then swipe to confirm flash.
8. If everything goes according to plan your phone will be flashed with the new firmware and rooted at the same time.
9. Reboot and enjoy!
10. I tried this method on my phone and it all went smoothly, but in case you get errors, you have to figure it out yourself, I WONT BE ABLE TO HELP YOU! AGAIN BE CAUTIOUS, FOLLOW STEPS EXACTLY AS DESCRIBED AND PROCEED AT OWN RISK.

Official ROM Flashing Guide

Hi everyone, This thread is to consolidate the official firmware download links for easy reference in case anyone needs to reinstall the full firmware.
DAV-703L，V100R001C233B011
http://consumer.huawei.com/cn/support/downloads/detail/index.htm?id=46545
DAV-703L，V100R001C233B017
http://emuirom123.dbankcloud.com/DAV-703L_EMUI3.1_Android5.1_V100R001C233B017.rar?rid=1471
DAV-703L，V100R001C233B018
http://emuirom123.dbankcloud.com/DAV-703L_EMUI3.1_Android5.1_V100R001C233B018.zip?rid=1508
DAV-703L，V100R001C233B021
http://emuirom123.dbankcloud.com/DAV-703L_EMUI3.1_Android5.1_V100R001C233B021.zip?rid=1638
DAV-703L，V100R001C233B023
http://download-c.huawei.com/downloa...67&siteCode=cn
DAV-703L, V100R001C233B028 OTA
http://pan.baidu.com/s/1bnboSl5
Steps to flash official firmware
*Note* You need to be on official recovery before attempting to flash. Failing which your device may brick!
Normal flash method
1. Prepare a SD Card
2. Download and unzip the content from official link
3. Create a folder in root of SD Card named dload and copy the unzipped file inside
4. Put the SD Card into your phone
5. Goto Settings > Update > Menu > Local Update
Forced flash method
1. Prepare a SD Card
2. Download and unzip the content from official link
3. Create a folder in root of SD Card named dload and copy the unzipped file inside
4. Put the SD Card into your phone
5. Switch off your phone
6. Press vol up + vol down + power button at the same time. This will trigger a force update of firmware.
Cheers
Vincent

Nice thread, I`m waiting for a no Chinese official rom.
Any one have notices about?

P8maxdav-703l,android5.1.1_emui3.1_v100r001c233b023
P8maxdav-703l,android5.1.1_emui3.1_v100r001c233b023

Hi. The link to b023 doesn't work. I'm on b021, rooted and removed some of the bloatware. If I update to B023 will I need to root again and remove the bloatware over again? Thanks!

For rooted devices with original bootloader restored, is it necessary to remove supersu binaries or re-lock the bootloader before updating?
Sent from my HUAWEI P8max using XDA Free mobile app

To be safe from brick. Unroot and manually update ota

Thanks William, but what do you mean by "unroot"?
Enviado desde mi HUAWEI P8max mediante Tapatalk

There are many apps that temp keep root for official ota. Just find the right ones.

william1974 said:
There are many apps that temp keep root for official ota. Just find the right ones.
Click to expand...
Click to collapse
Can you write one or two of them that working on android 5.1 and higher?

how did you root
Richie said:
Hi. The link to b023 doesn't work. I'm on b021, rooted and removed some of the bloatware. If I update to B023 will I need to root again and remove the bloatware over again? Thanks!
Click to expand...
Click to collapse
Hi Richie,
Can you please advise your root method. I have been trying for weeks as the phone constantly crashes google play services. I love the phone, bur would love to root it more.
Any help would be so appreciated
[email protected]
Thanks so much
Michael

Richie said:
Hi. The link to b023 doesn't work. I'm on b021, rooted and removed some of the bloatware. If I update to B023 will I need to root again and remove the bloatware over again? Thanks!
Click to expand...
Click to collapse
Yes you need to root again after every update.
william1974 said:
To be safe from brick. Unroot and manually update ota
Click to expand...
Click to collapse
You can't unroot and update OTA. I tried and it doesn't work. Unroot only removes the supersu but it doesn't restore the partition that's why the OTA will fail. The only way is to flash a full firmware then update the OTA from there. Alternatively, you can flash the system.img but this only works for full rom updates.
Sent from my HUAWEI P8max using Tapatalk

DAV-703L, V100R001C233B028 OTA?
I have B026...but i dont see it in the op....is it a mistake the 028 is 026?
Also i have P7 with unlocked bootloader and root....every time i had an ota update i only loose root...i didnt have to lock the bootloader or unroot....just root it again so idont see a reason to unroot the phone..

moviehunter2009 said:
DAV-703L, V100R001C233B028 OTA?
I have B026...but i dont see it in the op....is it a mistake the 028 is 026?
Also i have P7 with unlocked bootloader and root....every time i had an ota update i only loose root...i didnt have to lock the bootloader or unroot....just root it again so idont see a reason to unroot the phone..
Click to expand...
Click to collapse
I flashed it, its still B026 so i think its a type error!

Hirs_E_Fruit said:
I flashed it, its still B026 so i think its a type error!
Click to expand...
Click to collapse
Ok....thats what i thought.

DAV-701L
Leechoonhwee said:
Hi everyone, This thread is to consolidate the official firmware download links for easy reference in case anyone needs to reinstall the full firmware.
DAV-703L，V100R001C233B011
http://consumer.huawei.com/cn/support/downloads/detail/index.htm?id=46545
DAV-703L，V100R001C233B017
http://emuirom123.dbankcloud.com/DAV-703L_EMUI3.1_Android5.1_V100R001C233B017.rar?rid=1471
DAV-703L，V100R001C233B018
http://emuirom123.dbankcloud.com/DAV-703L_EMUI3.1_Android5.1_V100R001C233B018.zip?rid=1508
DAV-703L，V100R001C233B021
http://emuirom123.dbankcloud.com/DAV-703L_EMUI3.1_Android5.1_V100R001C233B021.zip?rid=1638
DAV-703L，V100R001C233B023
http://download-c.huawei.com/downloa...67&siteCode=cn
DAV-703L, V100R001C233B028 OTA
http://pan.baidu.com/s/1bnboSl5
Steps to flash official firmware
*Note* You need to be on official recovery before attempting to flash. Failing which your device may brick!
Normal flash method
1. Prepare a SD Card
2. Download and unzip the content from official link
3. Create a folder in root of SD Card named dload and copy the unzipped file inside
4. Put the SD Card into your phone
5. Goto Settings > Update > Menu > Local Update
Forced flash method
1. Prepare a SD Card
2. Download and unzip the content from official link
3. Create a folder in root of SD Card named dload and copy the unzipped file inside
4. Put the SD Card into your phone
5. Switch off your phone
6. Press vol up + vol down + power button at the same time. This will trigger a force update of firmware.
Cheers
Vincent
Click to expand...
Click to collapse
Thanks A lot , I was looking for this .. I'm also interested to know if there are any DAV-701L Official stock ROMs
Appreciate it if you can help!

Alazmy said:
Thanks A lot , I was looking for this .. I'm also interested to know if there are any DAV-701L Official stock ROMs
Appreciate it if you can help!
Click to expand...
Click to collapse
http://download-c.huawei.com/download/downloadCenter?downloadId=49843&version=118212&siteCode=th

Thanks alot

Please some more details
Leechoonhwee said:
Hi everyone, This thread is to consolidate the official firmware download links for easy reference in case anyone needs to reinstall the full firmware.
*Note* You need to be on official recovery before attempting to flash. Failing which your device may brick!
Normal flash method
1. Prepare a SD Card
2. Download and unzip the content from official link
3. Create a folder in root of SD Card named dload and copy the unzipped file inside
4. Put the SD Card into your phone
5. Goto Settings > Update > Menu > Local Update
Forced flash method
1. Prepare a SD Card
2. Download and unzip the content from official link
3. Create a folder in root of SD Card named dload and copy the unzipped file inside
4. Put the SD Card into your phone
5. Switch off your phone
6. Press vol up + vol down + power button at the same time. This will trigger a force update of firmware.
Cheers
Vincent
Click to expand...
Click to collapse
What exactly do you meen by "You need to be on official recovery before attempting to flash"
what is the "official recovery" a settings item ?
Thanks,
Michael.

You can't flash an official update with TWRP, you need the Stock Huawei recovery!

How do i know ..... ?
Hirs_E_Fruit said:
You can't flash an official update with TWRP, you need the Stock Huawei recovery!
Click to expand...
Click to collapse
Hi,
Thanks for your replay, My P8 Max is on the way, the seller said they have to flash a custom rom to have multilingual and playstore it is supposed to be a 703L i just want to be prepared to upgrade to latest version Rom B029 and understand exactly how to proceed not going by mistake into a "brick" state. Please let me know what to check to make sure i will do the right steps.
Thanks,
Michael

Manual installation of Android 5.1 on H60-L02

Hello,
So, I am a newbie in all these things. Have an Honor 6 (H60-L02), B317, Android 4.4.2 and EMUI 3.0. Tried to understand this http://forum.xda-developers.com/honor-6/general/honor-6-stock-roms-t2963180, but so far not much success.
Q1: b532 or the latest available developer edition, hch one to download?
Q2: I bought my device rooted (or something like this: Chinese was changed to Russian). Now I checked the phone with Root Checker app, and it says "Root access is not properly installed on this device". Do I need to get rid of a root access or properly install it before updating phone to 5.1? Or it does not matter?
Q3: After downloading one of the stock roms from q1, hat are my actions? Is it enough to format SD-card, create "dload" folder there, unzip rom to it, and then to insert the card into the phone, launch "Update" app on the phone (the one with emui logo), choose "Local update" and wait? Or something else is required?
Is there any step-by-step manual for newbies like me? Something in a format of:
"1. download a rom
2. download a software version 1.x from this link.
3. launch the software
4. open rom in that software
etc."
It is hard to understand lots of termins and mentions of programs, but I am also tired of waiting for OTA-update, and none of the Huawei's emails answered. Their support sucks.

haher2 said:
Hello,
So, I am a newbie in all these things. Have an Honor 6 (H60-L02), B317, Android 4.4.2 and EMUI 3.0. Tried to understand this http://forum.xda-developers.com/honor-6/general/honor-6-stock-roms-t2963180, but so far not much success.
Q1: b532 or the latest available developer edition, hch one to download?
Q2: I bought my device rooted (or something like this: Chinese was changed to Russian). Now I checked the phone with Root Checker app, and it says "Root access is not properly installed on this device". Do I need to get rid of a root access or properly install it before updating phone to 5.1? Or it does not matter?
Q3: After downloading one of the stock roms from q1, hat are my actions? Is it enough to format SD-card, create "dload" folder there, unzip rom to it, and then to insert the card into the phone, launch "Update" app on the phone (the one with emui logo), choose "Local update" and wait? Or something else is required?
Is there any step-by-step manual for newbies like me? Something in a format of:
"1. download a rom
2. download a software version 1.x from this link.
3. launch the software
4. open rom in that software
etc."
It is hard to understand lots of termins and mentions of programs, but I am also tired of waiting for OTA-update, and none of the Huawei's emails answered. Their support sucks.
Click to expand...
Click to collapse
Okay, so I googled a bit more. Please, correct me, if I'm wrong:
1. install hisuite on pc, connect phone to pc
2. download the latest multitool, get rid of all traces of root, relock bootloader.
3. create "dload" folder on sd-card, put b317 rom in it.
4. apply 3buttons (+-power)
5. put b532 into dload folder on sd-card
6. launch it through "local update" phone app. wait till full reboot.
7. apply 3 buttons again
8. install gapps