Related
Typed this up for a friend I thought it would be nice to share with any new droid charge owners looking for a guide to how to root FP5.
Major Credit goes to:
trparky
I learned how to do this from his website:
Tom's Android Knowledge Base -- Offline
Root Stock Droid Charge FP5:
First download this tool:
MD5-Checker
It will be used to run an md5 check on the files before they are flashed to your phone.
Next download this:
http://www.toms-world.org/android/download/ftp/ODIN3+v.1.82.exe
MD5: 3D8E8240F2A4F66E63A6622F65C7C909
This is Odin the *Windows* program used to interact with your phone.
Next download this:
0817_charge_recovery.tar.md5
MD5: 925D33E1AD40518AAC09B179DFDB0F76
This is CWM your main interface that will be used when loading roms, etc
Finally download this:
http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.2-RC3-arm-signed.zip
MD5: 6462AC14CD38ED7C539CE3E29A6B92A8
This is the file that you flash to root your phone.
Run MD5 Tool to make sure all the MD5's match the previous MD5 checksum!
1. Open the MD5 program
2. Select create an MD5 checksum
3. Browse to the file that needs to be checked
4. Verify that the MD5 created matches the ones above (if they don't re-download)
5. Repeat for all files
Now you have all the files downloaded to root your phone. The steps to root stock droid charge are as follows:
Copy files to SD card
1. On the home screen select settings
2. Select USB setting and turn on USB debugging
3. Plug in your phone to your computer (give it a min to install drivers)
4. Pull down your top bar and select "Connect storage to PC" button
5. Create a new folder called Downloads
6. Drag the Superuser-3.2-RC3-arm-signed.zip file into the Downloads folder that you just created
7. Hit the "Disconnect from storage PC" button on your phone
CWM
8. Turn off your phone
9. Once the phone is completely off take out the battery
10. Open Odin then while holding the volume button down plug your phone into the computer
11. When you get the Yellow triangle with android in it your in download mode, plug battery back in.
12. On the left under option uncheck Auto Reboot (you and leave F. Reset Time checked)
13. Once Odin picks up your phone (a yellow com box will show up) click on PDA and browse to the CWM file and select it
14. Click start (it should be a quick flash)
15. Once the flash says successful take out battery and unplug phone
Superuser
16. Put your battery back in the phone
17. Hold down volume up and home (button on bottom of phone that has an up arrow) and the power button
18. Once you see the Samsung logo release the power button but continue to hold down the volume up and home button down
19. Once your phone has booted into CWM(there will be a banana at the bottom of the screen) arrow down with the volume button and select mounts and storage with the power button
20. Arrow down to the option that says mount system and use the power button to select it
21. Arrow down and select go back
22. Arrow down and select install zip from sdcard
23. Select choose zip from sdcard
24. Arrow down and select Downloads
25. Select the file that says Superuser-3.2-RC3-arm-signed.zip
26. Arrow down and select Yes - Install Superuser-3.2-RC3-arm-signed.zip
27. Select Go Back
28. Select Go Back
29. Select reboot system now
Let the phone boot up go the market and install root check it should say you’re rooted. Then your all done your phone has root that wasn't so hard was it
If you still are unsure or run into any problems feel free to send me a pm I would be happy to help you through the process via skype.
The link to the recovery file you mentioned in this post points to http://www.imnuts.org/downloads/charge/1209_charge_recovery.tar.md5.
Please update your link.
I no longer have permission to distribute the CWM file that imnuts made. The file has also been removed from the file system path that the web server has access to, meaning that it's outside of the public_html folder.
I do realize that some people still want the older 4.0.1.4 version of CWM but you will have to ask Imnuts for that file. Like I said, I do not have permission to distribute that file anymore.
trparky said:
The link to the recovery file you mentioned in this post points to http://www.imnuts.org/downloads/charge/1209_charge_recovery.tar.md5.
Please update your link.
I no longer have permission to distribute the CWM file that imnuts made. The file has also been removed from the file system path that the web server has access to, meaning that it's outside of the public_html folder.
I do realize that some people still want the older 4.0.1.4 version of CWM but you will have to ask Imnuts for that file. Like I said, I do not have permission to distribute that file anymore.
Click to expand...
Click to collapse
Sure thing just updated post thank you for making me aware
I cant get the md5 for match for this file. I've downloaded over and over and it still doesnt match. what do i need to do?
"Next download this:
MD5: E9A01D028362387332C46F5FB32C23A6
This is CWM your main interface that will be used when loading roms, etc"
The others matched with no problem.
Help!
The correct MD5 signature for that file is 9C41377FDCDB341310BC8C25D0794D6D.
A one-step ODIN using dwitherell's deodexed odin rooted stock file as described here is so much simpler, IMO.
how to get the Root? There is a method in one click.
trparky said:
The correct MD5 signature for that file is 9C41377FDCDB341310BC8C25D0794D6D.
Click to expand...
Click to collapse
Thanks I have the OP fixed now
KapTmaH said:
how to get the Root? There is a method in one click.
Click to expand...
Click to collapse
Didnt think there was a one click for our device? Didnt see it listed.
No, there isn't a "one-click-root" for the Droid Charge.
Sent from my SCH-I510 using Tapatalk
I'm pretty sure there is no one click root for our DC. Im not a fan of one click root learning how to root manually will get you comfortable with flashing with Odin and CWM which you will need to flash roms, kernels, etc.
Sent from my SCH-I510 using xda premium
Will this root method wipe all my data? I dont want to lose my data...
heathro1281 said:
Will this root method wipe all my data? I dont want to lose my data...
Click to expand...
Click to collapse
no this method will not wipe any data
Sent from my SCH-I510 using xda premium
Props to you ztkryan!!
Spent hours trying to find something simple to explain this process. There are tons of people trying to explain this but nobody can seem to do it in a step by step list.
Simple, clear and concise ;D
I did all the following steps as stated, and when I run Root Checker, it states "Sorry, you do not have proper root access."
Am I the only one receiving this error? Does anyone know what I am doing wrong perhaps?
slapshot591 said:
I did all the following steps as stated, and when I run Root Checker, it states "Sorry, you do not have proper root access."
Am I the only one receiving this error? Does anyone know what I am doing wrong perhaps?
Click to expand...
Click to collapse
I had that problem one time to fix it make sure you mount system before reflashing the superuser.apk in cwm
Sent from my SCH-I510 using xda premium
ztkryan said:
I had that problem one time to fix it make sure you mount system before reflashing the superuser.apk in cwm
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
Giving this a try right now, I will return with results. Thanks again.
EDIT: Mounting System fixed my issue. I really appreciate your response ztkryan.
slapshot591 said:
Giving this a try right now, I will return with results. Thanks again.
EDIT: Mounting System fixed my issue. I really appreciate your response ztkryan.
Click to expand...
Click to collapse
just an FYI if you rebooted your phone you will have to install cwm again (stock kernel overwrites recovey to stock recovery on boot)
Sent from my SCH-I510 using xda premium
I must have missed something, I have root and that seems to be working fine but when I try to get back into CWM to do a backup by holding the up volume + power & home it appears to take me into a stock recovery. Did I do something wrong?
Rodhargis said:
I must have missed something, I have root and that seems to be working fine but when I try to get back into CWM to do a backup by holding the up volume + power & home it appears to take me into a stock recovery. Did I do something wrong?
Click to expand...
Click to collapse
You didn't do anything wrong to make cwm stick you have to flash a custom kernel the stock kernel overwrites custom recovery on boot
Sent from my SCH-I510 using xda premium
Can any send me a Stock Rogers Rom from one of their phones so that I can revert my phone to stock? My GPS is not working no matter how many different solutions I try. I need to return my phone to Rogers so that they can see if it is a hardware problem and of course I need my phone stock so as to not void my warranty.
Thanks!
have you tried this?
http://forum.xda-developers.com/showthread.php?t=1326143
Here is the good link click me
MAKE SURE VOODOOLAG FIX IS DISABLED!
HOW: Create a folder on your internal SD card called Voodoo. Then create another folder inside of it called disable-lagfix.
I didn't do this the first time and the phone bricked on me D:
FLASH KERNEL WITH ODIN --
After phone has booted
Download Root explorer from market & locate and delete:
/system/xbin/su
/system/xbin/busybox
/system/app/Superuser
go to settings>Privacy
-- DELETE USER DATA ALONG WITH SD CARD DATA --
DO IT, reboot. NO ROOT PURE STOCK.
When you factory reset the root wont be there either.
I did everything as it said and I had to click on two sections in root explorer so that I could delete su, busybox, and superuser. I also made sure that I put the disable-lagfix in the Voodoo folder (that was already there). I did a factory reset and I think that I have it, no superuser, which I hope means no root!
Thanks! I am hoping that this may also fix my GPS problem. I can't seem to lock onto any satellites when I am using Navigation.
Help
Can someone please give me a working download link. Half the links take me to ilivid download manager and the other half go dev-host and say that the is no longer available. The google drive link from this post says 404 file not found. Can someone please upload a reliable download link.
OnfireNFS said:
Can someone please give me a working download link. Half the links take me to ilivid download manager and the other half go dev-host and say that the is no longer available. The google drive link from this post says 404 file not found. Can someone please upload a reliable download link.
Click to expand...
Click to collapse
Here you go:
https://www.dropbox.com/s/2w3z0p15uvn4clc/i997R - Back to Stock.zip?dl=0
Also, the instructions that come with:
Odin Instructions:
1) Make sure the drivers for the Infuse 4G are installed. (Installing Kies is the easiest way to accomplish this.)
2) Download and unzip Odin_UXKG3_rooted_no_bootloaders.zip.
3) Run Odin v1.81 as administrator.
4) Place your phone into download mode. (Pull battery, replace battery, and press and hold both volume buttons while plugging in the USB cable.)
5) Make sure your phone shows up in Odin as COM##.
6) Click the PDA button and choose PDA_UXKG3_rooted_no_bootloaders.tar.md5.
7) Click the PHONE button and choose PHONE_UXKG3.tar.md5.
8) Press Start.
9) If the phone doesn't automatically reboot after it completes the flash, just pull the battery and then replace it and turn on the phone.
10) You should perform a factory reset after it boots. Go to Settings > Privacy and select factory reset. Warning: This will clear everything on your internal SD card, so move everything you want to keep to the external SD card first.
Click to expand...
Click to collapse
Ok these steps are very important but before anything I also have to thank Lyriquidperfection & Ausdim for setting up their important parts of the instructions inside the links below:
So before you flash anything, or start playing with your gem, follow these important steps below to get all the important parts backed up and safe, so that you will not have to return your device back to samsung broken. Believe me I have seen it happen PLENTY of times in this forum, so read carefully
Make sure you have a Good USB cable and a stable PC and that don't get any power outages or surges, you dont want to be half way through something and you loose power or get a bad connection.
1st: Install Samsung Kies on your PC this will then Install the Samsung USB drivers you will need to connect your device to your PC OR you can get the samsung drivers on there own from the Link in 2nd step, but I recommend you install kies as it may be useful to you in the future.
2nd: Now as your IMEI number is like the heart of your device lets back it up right now: Follow only part of these steps in this link, you will finish the rest of the backups at the end when your rooted. I have copied and bolded the parts you will need to do right now, once finished this section of the backup you should be left with a *.qcn file which is roughly around 250kb of size.
http://forum.xda-developers.com/showpost.php?p=33048706&postcount=1
*Setting up QPST with your PC:*
*Backing Up IMEI / NV Data:*
*Restore USB Settings after Backup / Restore:*
Now keep that page open because you will return here in step 6 once you are rooted to complete the backup process.
3rd: Now Install Odin V3.04 - You can get the link for odin in the 4th step link, So you may aswell just continue on to 4th step as the instructions inside that link advice you to install Odin aswell.
4th: Now you must Root your device and install CWM recovery , Follow these steps carefully > http://forum.xda-developers.com/showpost.php?p=32235061&postcount=1
5th: Once you have root I recommend you instantly make a full backup of your device also known as a Nandroid backup. You must go into recovery mode to do this with the CWM recovery you have just installed in 4th step above. (In recovery mode just click backup/restore and then choose backup, after its done your backup will be placed on your ext sd card , if you dont have ext sd card then choose backup onto internal sd card.)
6th Now lets finish the backup process since we are now rooted, I am going to say this again, this is VERY important incase something goes wrong and you loose your Imei and Data, you need to back it all up. By doing this it will save you returning your device back to samsung like many have done previously because they have not done this, Remember where you left off in 2nd step above? Well now you can go back and complete the partition backup of the efs folders. You should be left with 4 backup files for this final section of the backup process >>> http://forum.xda-developers.com/showpost.php?p=33048706&postcount=1
--------====FINISHED====--------
Congratulations you now have your Imei/Nv data backed up , You are rooted and Nandroided. Now you can play around but off-course DO NOT be reckless make sure you know what you are playing with
Peace
PS: Only trust what you see in this I9305 XDA forum, as i have been following the device from day one and I can only recommend the information you see here.
can't find step 4..
Sorry I just fixed all the links
stuck on whether to install the I9305_CWM_Recovery.tar.md5 software and what I risk
EDIT: thread Readers please note. I was a NOOB and I initially and accidentally credited "Lyriquidperfection" (who has also been very considerate in assisting) for the thread when "btemtd" was the original thread creator. "btemtd", I have edited to show appropriate. I am sorry please forgive my oversight.
**
Dear "btemtd"
*Note the following pre-install procedures and verifications confirmed:
1) My phone is NOT bricked and is running stock OEM i9305 installed software with details for the device posted at the end of this reply.
2) prior to doing ANYTHING I verified I can Dial *#7284# on phone and can see the 'Qualcomm USB Settings' button
3) KIES drivers installed and i9305 to PC works in KIES application and drag and drop modes
4) I have downloaded the Param_Bin_I9305.tar.md5 file in case I need it.
5) I have downloaded the I9305_CWM_Recovery.tar.md5 file for use when I install the CWM.
6) I have downloaded the CWM-SuperSU-v0.96 application but have not yet installed it and have not yet learned about how to operate it (I will study and follow your instructions prior to doing so)
7) I have read this entire thread and all replies.
8) I have also read the entire thread and all replies to: [WARNING! + GUIDE] Backup and Restore IMEI / NV Data Procedure for GT-I9305
9) I don’t care about losing any of the media or pictures or applications (whatsapp) installed on my phone as these can all be reinstalled later on.
I have successfully executed the following so far:
1) I installed QPST v2.7.378 program on my PC and backed up a .qcn file. I then restored the .qcn file back to the i9305 and it accepted the restoration without problem. I can see my IMEI number by dialing Dial *#06#
2) I DID NOT back up any of these files below because I was NOT rooted and I DO NOT have a terminal emulator application (I can learn the emulator application if it is necessary and if someone can provide a link to where to get it). IF it is required for me to back up these files PRIOR to proceeding using ODIN please direct me to do so. I would prefer to not have to learn the emulator program unless it is required.
m9kefs1 - Located at: '/dev/block/mmcblk0p4'
m9kefs2 - Located at: '/dev/block/mmcblk0p5'
m9kefs3 - Located at: '/dev/block/mmcblk0p6'
3) I installed ODIN version Odin3 v3.04 (but I still have no clue how to operate this software)
*
This is where I stopped. Why? Well, after reading the instructions "btemtd"provided in thread I became concerned. My primary objective is to first save a backup of my phone. Since I am such a noob I don’t even know what a backup file extension is named (for example a backup for PC might be named xxxxx.img). I suspect that the backup extension file might be named xxxxx.tar.md5 but I still don’t know.
*
As I read "btemtd"instructions further I became concerned about the following items:
1) "btemtd"states in the In the 4th that one should “Now you must Root your device and install CWM recovery”. Well, since I am still such a noob I don’t know how I should root my device. Ideally, I want to make a backup of my phone (I think that will eventually be called a “nandroid”) as quickly as possible so if I inadvertently damage something during an install I will have an original source file to revert to (and hopefully be able to restore). I have a few questions:
A) Is there a special “rooting” software I should be using it or is “rooting” just a process name (like “flashing” a drive for example)? It might help me if I could have some noob instruction on how to root an i9305 without bricking it.
B) If I “root” my phone at this stage (without having made any backups other than the xxxx.qcn file) do I risk bricking my phone and not being able to revert to the stock OEM i9305 software?
2) Another area of concern was as follows. "btemtd"advocates installing the CWM (I presume that is short for clockwork module) application and provides a hyperlink for it (which I read). In this instruction it advocates downloading the file named “I9305_CWM_Recovery.tar.md5”. This is where things get a little murky and hence the advance questions (which hopefully will help other noobs beyond myself and allow "btemtd"to concentrate on the i9305 problems I couldn’t solve in a lifetime). My critical question is as follows: IF I follow the instructions that "btemtd" hyperlinked to (these instructions were posted by senior member “ausdim”) and IF I install the CWM (install via ODIN) file named “I9305_CWM_Recovery.tar.md5” WILL I be replacing my stock i9305 OEM software with this new one created as “I9305_CWM_Recovery.tar.md5”? Could you please apprise on this instruction (remember, my first goal is to make a full backup of my existing stock i9305 OEM software on the i9305 so that I can restore if I late noobify any of the instructions). I want to confirm that by proceeding with the procedures kindly laid out by audsim I will NOT be wiping out my OEM software on the i9305 supplied when the phone was new. IF the answer to that question is “YES, you will be essentially replacing the stock OEM software for the i9305” with the new one created under “I9305_CWM_Recovery.tar.md5.”” then I might have to consider the implications of losing all of the factory OEM software that came on the phone. Please note that I am hoping that this procedure will result in the phone OS changing from:
FROM: stock OEM i9305 software
TO: stock OEM i9305 software + CWM module
*
This post is lengthy, yes, but I hope accurate and hopefully it will provide some clearance, comfort, or guidance to other noobs looking to backup their phone prior to risk bricking it on more risky adventures.
Thanks in advance and donations to "btemtd" for his hard and thankful efforts.
DEVICE MODEL BUILD is as follows:
Samsung Galaxy S3 LTE Hong Kong Version
Model number:GT-19305
Android version: 4.1 .1
Baseband version: 19305ZHALl1
Kernel version
3.0.31-177985
[email protected] #1
SMP PREEMPT Thu Sep 20 23:04:05 KST 2012
First of all I am the one who made this guide with all the links to the appropriate places, You cannot see this? LOL
Anyways.... You asked
" Is there a special “rooting” software I should be using it or is “rooting” just a process name (like “flashing” a drive for example)? It might help me if I could have some noob instruction on how to root an i9305 without bricking it.
B) If I “root” my phone at this stage (without having made any backups other than the xxxx.qcn file) do I risk bricking my phone and not being able to revert to the stock OEM i9305 software?"
A)There is no special rooting software, its basically a file which you flash onto your phone which gives you the root access. If you follow the instructions 100% and nothing on your side fails well then you should not brick your device, reason people brick is becuase they have done the wrong thing or have flashed the wrong thing or it could be bad flash files. But I can confirm none of these files are bad as they have all been used with success.
B) we would hope that the qcn is enough, but maybe not. Only because we have not seen it happen yet, everyone who has lost imei so far has made the mistake and not made any type of backup, But lyriquid says JUST TO MAKE SURE you should also backup those partitions after u root just incase it comes to the point where you need them.
You want a Noob instruction on how to root without bricking it? ummmm What the hell is that! LOL Mate this guide is almost as NOOB as it gets, and OF COURSE if you follow this guide and all the links you wont brick it.
Reason you want root is this will then allow you to further back up the partitions and also allow you to make a nandroid (FULL BACKUP) of your current software/ROM
Only way to do this FULL BACKUP is by having CWM installed:
CWM is NOT firmware it is only recovery module, CWM will only replace your stock recovery module it is Only 7mb. it will NOT replace your stock firmware. Also this recovery module has much more capabilities then your stock recovery. It will also allow you to flash Mods, tweaks,roms if you wish to do so in the future.
Even if you do all of this you can still even return it back to OEM with stock recovery firmware and UNROOT. anything is possible. So my recommendations if you want to start flashing software and want to backup your rom is to follow my steps fully in this thread and click on the links and follow those guides as well. Each link will guide you as well. Once you have root and CWM installed and you want to make a FULL BACKUP of your OEM Softwareall you need to do is boot into recovery mode, then choose Backup/restore and then >>> Backup Thats it very simple which is why i didn't include it in the thread because as soon as you go into recovery mode you will be able to figure it out yourself
By the end of all this procedure you will have
Rooted Stock OEM software + CWM REcovery
EDIT: I reccomend you do what the full guide says, and install a terminal emulator because you dont need to learn code Lyriquidperfection has written down exactly what you type inside the terminal and thats IT your done. Its that easy!!!
For now you type the commands anyway. I am working on updating EFS Pro to have Qualcomm support so you can back up all NV Items from there and also backup and restore other important partitions just with a few clicks. I'll keep everyone updated when something good enough for a beta develops.
Sent from my GT-I9305 using Tapatalk 2
lyriquidperfection said:
For now you type the commands anyway. I am working on updating EFS Pro to have Qualcomm support so you can back up all NV Items from there and also backup and restore other important partitions just with a few clicks. I'll keep everyone updated when something good enough for a beta develops.
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
This would be awesome. must say
Thanks btemtd, great post!
I am also a recent convert (from iphone) to a galaxy s3 and have an i9305T model. I have been doing a bit of research in order to prepare myself to safely root my phone and was stoked to see such a helpful post. I will admit that I am also a noob with this sort of stuff but still do my best to learn what I can.
I just wanted to confirm that the process you have listed will support my aforementioned phone model with telstra as the carrier? I only ask because I remember a previous rooting guide that was only applicable to Optus phones and just want to make sure.
Thanks again for your help
Yes this will work on all i9305 models. No probs bro i was starting to get amazed on how many ppl were flashing the wrong stuff and braking there imei lol so i thought this may come handy
Sent from my GT-I9305 using xda app-developers app
nvmd, stupid noob
Sorry about this post. Misread something between steps 4 and 5.
Now fully rooted. Thanks for the great post. Very helpful to someone entirely new to this daunting process. Makes jailbreaking a walk in the park xD
Unroot
"btemtd" Thanks for you above tutorial.
Is it possible to add and process on how to unroot the GT-i9305, if required
Thanks btemtd, I am working on a YouTube Video, to help noobs like me to root their I9305. Would I be able to pm you just incase I need some help on anything regards to rooting and roming?
bleepsake said:
Thanks btemtd, I am working on a YouTube Video, to help noobs like me to root their I9305. Would I be able to pm you just incase I need some help on anything regards to rooting and roming?
Click to expand...
Click to collapse
yes offcourse you can PM me.. Thats a good Idea I might add your video to this guide if you dont mind, this will make it totally complete!!...
FOR NOOBS only
This is written by a noob for other noobs. It contains a set of very detailed instructions and is compilation of varies inputs from lyriquidperfection, audsim, btemtd, and nnnevvv. Without them I would be nowhere. I hope this guide, despite being very detailed, can help others so they don't have to hunt and pester devs for answer. This guide is only an expansion and extrapolation of this post which was kindly created by btemtd.
*
It also involves other work from the developers I credited above.
*
This guide is NOT for you if you have:
1) Bricked your phone
2) have an i9300
3) lost your IMEI
4) installed a custom ROM
5) already have CWM or SU installed.
*
Please remember it is only an expanded set of instructions built upon btemtd original work. Its only intention is to help get it done, right, without using up other's time. If the thread creator or OP ed suggests I amend or remove anything please let me know.
*
Pre-install instructions:
1) Your device is NOT bricked and is running stock OEM i9305 installed software with details for the device posted at the end of this reply.
2) Prior to doing ANYTHING you can Dial *#7284# on device and can see the 'Qualcomm USB Settings' button
3) KIES drivers installed and i9305 to PC works in KIES application OR you have verified that USB drivers work fine for PC to device
4) You have downloaded on to your PC the Odin3 v3.04. application.
5) You have downloaded the I9305_CWM_Recovery.tar.md5 file to your PC.
6) You downloaded the CWM-SuperSU-v0.96. zip file and stored it on the device’s internal memory card. You can store it directly on the device’s INTERNAL SD card (don’t worry, CWM will allow you to navigate to it).
7) You don’t care about losing any of the media or pictures or applications (whatsapp) installed on my device as these can all be reinstalled later on.
8) Battery is charged to 80 percent or more
9) Solid dual use power and data cable tested and working.
10) Back up all of the contacts to SIM Card in case Data wipe.
11) You are okay with warranty being void and binary counter reset being added
Installation procedure
1) Get coffee
2) Install the latest version of Samsung KIES and check that complete cable communication works and that all drivers on the PC are installed. Confirm that KIES communicates with device on PC. DO NOT update your device using KIES to the latest Samsung or Android software.
3) install QPST v2.7.378 program on your PC. The QPST software is a qualcomm product and is a diagnostic tool that has a variety of subtools that you can use to test, manage and edit the form factor device. Click the setup.exe file and follow instructions. This is a qualcomm product and it is not complicated. A user manual (in case you feel like exploring) is available in .pdf.
4) Dial *#7284# on your device to access DeviceUtil and select 'Qualcomm USB Settings' at the bottom. Now scroll down and select 'RNDIS + DM + MODEM' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit DeviceUtil. Your device is now in DIAG Mode.
5) Connect your device to PC via USB. Note, it may showing “loading drivers” on your PC. Wait for USB drivers to load and install.
6) Find the QPST application on your PC and navigate to the 'QPST Configuration' menu. Select it and navigate to the 'Ports' tab. Press 'Add New Port...' button. Select the COM Port that has 'USB/QC Diagnostic' next to it, change the Port Label name (if you wish to) to 'Samsung GT-I9305 diagnostic” then press 'OK'. You should now see your device listed in the 'Ports' tab and the 'State' should indicate 'Enabled'. Close this QPST application.
7) The next step will help you to BACK UP the IMEI/NV Data.
8) Go back to the QPST application Folder and navigate to the 'Software Download' application and then select the 'Backup' tab. You will need to select and name the file. I chose “i9305-qcn-back-up-file.qcn”. Press the 'Browse' button and select a Save Location for your QCN File. Press the 'Start' button and wait for it to finish. DON’T TOUCH YOUR DEVICE during this process. This will back up all your devices NV Items and save them to the QCN Backup File you just named. The resulting QCN Backup File should be about 250KB in size. The QPST application will show the backup has been completed. Verify that the file was actually backed up by looking in the directory to where you selected to store it. Then close the program.
9) The next step will help you to check to RESTORING IMEI / NV Data:
10) Go back to the QPST application Folder and navigate to the 'Software Download' application and then select the ‘Restore’ tab. Press the 'Browse' button and search for the QCN Backup File you created (remember I named mine “i9305-qcn-back-up-file.qcn”). Press the 'Start' button and wait for it to finish. This will restore all your devices NV Items from the QCN Backup File. Your IMEI / NV Data should now be fully restored. Dial *#06# on your device's keypad to check your IMEI is restored. It should show your 17 digit long IMEI number on screen. Write it down and store for future purposes in case you need to recall it one day.
11) The next step is to Restore the USB Settings after you have performed the above QPST Backup / Restore procedure. Dial *#7284# on your device to access DeviceUtil and select 'Qualcomm USB Settings' at the bottom. Now select 'MTP + ADB' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit DeviceUtil. The device will reboot as you ask it to save and reset. Your device is now back to default USB operation.
12) Exit the QPST application.
13) The next step is to install ODIN which you will use to flash the CWM files from your PC to the device.
* Note that ODIN packages can be device specific. For the GT-i9305 I used “Odin3 v3.04.exe”. Navigate to where you have stored the ODIN application and select “Odin3 v3.04.exe” file and double click. ODIN will open.
NOTE: ODIN will not self install on your computer like a standard-install.exe folder. You will need to run the “Odin3 v3.04.exe” file every time to open ODIN up. Forgive my noobness for not knowing what the name of this procedure it.
14) Search for the ‘ I9305_CWM_Recovery.tar.md5 ‘ file you have downloaded previously in the “pre-install” instructions. For logistics purposes you may wish to drag and drop this file from its current storage location over the ODIN folder directory.
15) If KIES is running shut it down or suppress it on your PC.
16) The next step will involve “installing” the ‘ I9305_CWM_Recovery.tar.md5’ file. Actually, this is just a “module” that is intended to “replace” the stock recovery module. To do this, you will need to first set up your device to boot in what is called the “download” mode. To do this you must: POWER off the device first. Then after power is completely off, PRESS and HOLD the ‘power’ + ‘volume down’ + ‘home’ buttons all at the same time. I suggest that you start by pressing the “volume” + “home” buttons first instead of pressing the “power” button as you may inadvertently just power the device up (instead of booting it up into “download” mode). If you did it right you will boot up in “download” mode and Android will then ask if you if you “want to download a custom OS”. You will confirm “continue” by pressing the volume up key.
NOTE: it’s possible your PC computer may want to install device driver software. If so, just let it install and wait for it to finish.
NOTE: to navigate the menus in “download” mode (and also in “recovery” mode) you should use the VolUp / VolDown to go “up” or “down” the menu. Press the “power” button to select items (kind of like a “go” or “enter” function).
17) Now Connect your device (make sure battery is at least 80% charged) to your PC ( it is preferable to connect directly to the computer and not through a USB HUB or port replicator).
18) Open the ODIN application by navigating to the Odin3 v3.04.exe file . Make sure your device is detected and you should see a blue (older models may show yellow color) square in the top left corner.
NOTE: Make sure only the “auto-reboot” and “f reset time” boxes should be checked in the ODIN Application.
19) Click on the box next to “PDA”. And then click the “PDA” and navigate to the area where the ‘ I9305_CWM_Recovery.tar.md5’ file is stored. Select it and it will auto populate into the ODIN application. Then, on the ODIN application, press “start”. You will see a series of command actions showing in the ODIN Application which should show the status. Upon completion it should show that CWM was installed in the ODIN application. You may have to repeat this process once again as CWM may not “stick”.
20) There has been considerable debate about different units requiring the battery to be pulled due to the fact that some factory units have been shown to reboot back into its own factory state and therefore exclude the CWM file that you just tried to install in the previous steps. I read of many users who were experiencing this problem. See For further reading please see: http://forum.xda-developers.com/showpost.php?p=32235061&postcount=1 to show how to deal with and manage this problem. I, along with another user that I confirmed with, DID NOT have to do the battery pull method. Why? Well, I think that some factory models require this process and others do not. My device (specifications at end of post) did not require it. Also, the problem may have been created by user’s updating their device software through the KIES application which I recommend not doing until the device has been rooted and CWM and SU installed in this process.
21) After instructing ODIN to install the ‘ I9305_CWM_Recovery.tar.md5’ onto the device the device should reboot. If it does not reboot after awhile you can power down your device. What will happen? Well, you have either successfully installed the ‘ I9305_CWM_Recovery.tar.md5’ file or your device has reverted back to the factory restore option. You shouldn’t have much risk of bricking the device during this step. The key is to get the ‘ I9305_CWM_Recovery.tar.md5’ file to stick during the “download” process. If it does not stick you will need to refer to the thread For further reading please see: http://forum.xda-developers.com/showpost.php?p=32235061&postcount=1 as to how to employ the “2 different battery pull during the reboot process” methods he suggested (again, fortunately I did not need to do this).
22) Now you need to put the device in “recovery mode”. Unplug the device from the USB Cable attached to the PC. To put it in recovery mode you must: POWER off the device and the PRESS and HOLD the ‘power’ + ‘volume up’ + ‘home’ buttons all at the same time. Again, I suggest that you start by pressing the “volume” + “home” buttons first instead of pressing the “power” button as you may inadvertently just power the device up (instead of booting it up into “recovery” mode). If you did it right you will boot up in “recovery” mode and you will clearly see the words “CWM-based Recovery” written in white on the top line. If you don’t see that then your installation of the ‘ I9305_CWM_Recovery.tar.md5’ did not work and you will need to repeat the steps above until you get it right.
23) Next you will be installing the SUSuperuser module while your device is in "recovery mode". Remember you should have stored the “CWM-SuperSU-v0.96.zip” (DO NOT unzip it yourself) on the Device’s internal memory card. Using the volume up/down keys and the “power” button for enter/go you should scroll down and select menu option "install zip from SD card"
select menu option "choose zip from internal SD card"
scroll down to the “CWM-SuperSU-v0.96.zip file and select that using the “power” button. It will then ask you “if you are sure you want to install, it can’t be done”. Scroll down to the “YES” and then select the power button to confirm. It will then mount and install it. Once it is done installing you will then need to scroll to the “go back” choice on the menu. Then go back to the “reboot” device and select that. It will reboot.
24) Your device should reboot and you should be able to confirm that SUSuperuser is installed by looking at the apps page on your device. You should be able to see a little blue Android with a red cape. If you see it, you have successfully installed.
25) Once you have root and CWM + SU installed and you want to make a FULL BACKUP of your settings and software. Using the same methods above, boot into “recovery mode”, then choose Backup/restore (select it with the “power button”). Then, it will begin the “back up” process which will take about (7 ) minutes (it takes longer if you are backing up lots of items). Note that the program will back up the backup items onto the EXTERNAL SD Card in a folder named “2012-11-07.10.57.45 (“time stamped”) and it will contain 6 items including boot image, recovery image, nandroid.md5, and 3 others. Mine was about 1.17 gb in size and DID NOT include any music, videos, or pictures. MAKE SURE that your external SD Card has enough free space to store the CWM back up folders. I suggest that you then copy the entire back up folder over to another secure location on your PC (which you can copy over to the SD card anytime) in the event your current external SD card or device goes whacky.
26) Well, it was not brief but it was detailed and concise and I hope it helps other noobs like myself to successfully install and execute this process as it will lead to further dev opportunities to trying out other ROM’s while being able to reverse the process if things goes really wrong.
27) If I was of help just say “thanks”. Will try to answer PM if you have them but I am just a noob and may be of little use. This was written by a noob and for other noobs. Hope I haven’t annoyed anyone else in the process.
*
Model number:GT-I9305
Android version: 4.1 .1
Baseband version: I9305ZHALI1
Kernel version
3.0.31-177985
[email protected] #1
SMP PREEMPT Thu Sep 20 23:04:05 KST 2012
Build number: JRO03C.I9305ZHALI7
Woahh thats alot of writing, but thanks for your time, I didnt know that myself and the guides in the links that LyriquidPerfection and Ausdim created were that hard to understand But i guess I dont know how a PURE noob thinks, Even though I was a noob in August this year i kind of know my way around a computer but I still think i am a noob compared to these programming devs, Maybe I am not the Noobiest noob anymore if thats a word LOL oh well the more information in this thread the more valuable. I think they should get this entire thread Stickied, I have already asked
btemtd said:
yes offcourse you can PM me.. Thats a good Idea I might add your video to this guide if you dont mind, this will make it totally complete!!...
Click to expand...
Click to collapse
Thanks buddy. Of course I dont mind you adding the video to this thread. I want to make a few videos actually that you might be able to help with. =)
working on a pm now.
Sent from my Beautiful GT-I9305 using Tapatalk
Ok I will reply when I wake up thanks
Sent from my GT-I9305 using xda app-developers app
hey droid!
This is awesome, I hope I can use this for my youtube guide for iOS refugees like me.
Sent from my Beautiful GT-I9305 using Tapatalk
bleepsake, can't wait to see your video.
Is unrooting unique per phone or is it the same? When I search unroot, I've seen guides to unroot only for certain phones.
mrbarbz said:
bleepsake, can't wait to see your video.
Is unrooting unique per phone or is it the same? When I search unroot, I've seen guides to unroot only for certain phones.
Click to expand...
Click to collapse
mrbarbs all you need to do to unroot is use odin and flash Official samsung firmware over the top of what you have. Done... its that easy no need for a guide lol
this will also get rid off CWM and put the stock original recovery back in and also stock kernel.... as a matter of fact stock EVERYTHING
make sure you backup all your important data before proceeding with this guide. I am not responsible for what happens to your device.
If your looking to root your galaxy tab 4 T230NU, follow these easy steps to gain root access.
1. Download all 4 files below. If you already have samsung usb drivers installed, skip step 2.
2. Extract your driver installation file and click the setup file for your samsung tab, and click Next. Now select your language and country, and click Next. Then, pick your install location and click Install. If you prefer to leave your install location default, just proceed by clicking Install.
3. After you have installed your samsung drivers, put the SuperSU file you downloaded earlier onto your tablet's internal/external memory. Now, extract Odin3_V3.09.zip and open the application. Now, put your tablet in download mode by holding down Power, Vol Down, and Home. You should see a blue box appear at the top left of the Odin page. After you successfully entered your tablet into download mode, untick Auto Reboot, and F. Reset Time in Option. Now, click AP, and locate your TWRP file you downloaded earlier, but do not click start yet.
4. Once you click start, Odin will begin flashing your custom recovery. Do not let your tablet boot up by turning off your tablet, or your stock recovery will overwrite TWRP. Once you turned off your tablet, enter TWRP by holding down Power, Vol Up, and home. After you booted into TWRP, click Install and locate your Supersu zip, and flash it. Once the flashing is complete, go back and select Reboot, then select system. Now you have root! Please give a thumbs up if this method worked for you.
Been Waiting for this but stuck
Thank you for this post! I'm anxious to get it going, but I'm a newb to Samsung, Odin, etc., so I need a little more detail. I'm pretty sure I installed the openrecovery file, but now the tablet is back up and I have no idea how to download the SuperSU file. I can't find "install" as you've described. I'm I installing it by selecting something on the device? I dragged the file onto the tablet....please be a specific as you can for a blonde, old lady newb lol
Mag44-5 said:
Thank you for this post! I'm anxious to get it going, but I'm a newb to Samsung, Odin, etc., so I need a little more detail. I'm pretty sure I installed the openrecovery file, but now the tablet is back up and I have no idea how to download the SuperSU file. I can't find "install" as you've described. I'm I installing it by selecting something on the device? I dragged the file onto the tablet....please be a specific as you can for a blonde, old lady newb lol
Click to expand...
Click to collapse
All you need to do is reboot into TWRP by holding down Power, Vol Up, and Home. After you have booted into TWRP, click install and locate the SuperSU file on your tablet. Let me know if you run into any more problems. :good:
I added a part in step 3, saying to put the SuperSU file onto your tablet's internal/external memory before you flash TWRP onto your tab.
@_Cristian_
There already is a "how to root your SM-T230" thread here : http://forum.xda-developers.com/showthread.php?p=54551588
The SM-T230 and SM-T230NU are the same device. Only difference is IR baster feature on the 230NU.
Thank you though for the thread.
g_ding84 said:
@_Cristian_
There already is a "how to root your SM-T230" thread here : http://forum.xda-developers.com/showthread.php?p=54551588
The SM-T230 and SM-T230NU are the same device. Only difference is IR baster feature on the 230NU.
Thank you though for the thread.
Click to expand...
Click to collapse
I didn't see that. Well, this thread has more thorough directions in case someone needs a little more info on how to root this tab. But thanks for the link.
I did everything that you said to do and I mean everything step by step and I flashed SuperSU and when I pushed reboot after everything was done and I opened root checker to see if I did it. It said it has not been properly done and I also tried a different app and that one said the tablet has not been Rooted please help. email me with any answers please @ [email protected] any help would be greatly appreciated.
_Cristian_ said:
make sure you backup all your important data before proceeding with this guide. I am not responsible for what happens to your device.
If your looking to root your galaxy tab 4 T230NU, follow these easy steps to gain root access.
1. Download all 4 files below. If you already have samsung usb drivers installed, skip step 2.
2. Extract your driver installation file and click the setup file for your samsung tab, and click Next. Now select your language and country, and click Next. Then, pick your install location and click Install. If you prefer to leave your install location default, just proceed by clicking Install.
3. After you have installed your samsung drivers, put the SuperSU file you downloaded earlier onto your tablet's internal/external memory. Now, extract Odin3_V3.09.zip and open the application. Now, put your tablet in download mode by holding down Power, Vol Down, and Home. You should see a blue box appear at the top left of the Odin page. After you successfully entered your tablet into download mode, untick Auto Reboot, and F. Reset Time in Option. Now, click AP, and locate your TWRP file you downloaded earlier, but do not click start yet.
4. Once you click start, Odin will begin flashing your custom recovery. Do not let your tablet boot up by turning off your tablet, or your stock recovery will overwrite TWRP. Once you turned off your tablet, enter TWRP by holding down Power, Vol Up, and home. After you booted into TWRP, click Install and locate your Supersu zip, and flash it. Once the flashing is complete, go back and select Reboot, then select system. Now you have root! Please give a thumbs up if this method worked for you.
Click to expand...
Click to collapse
ordered a manufacture refurbished tab 4 T230NY from amazon says it comes with 4.4 another customer says theres recently updated to 5.1.1 will this method work if i update to 5.1.1? I would rather have lollipop without installing a rom
So there is a bargain chinese 4G phone called the 'InFocus M512'.
The problem with it is that it comes without Google Apps and also is not rooted (sometimes is). Also it does not have CWM Recovery.
So this quick tutorial shows you how to root, install CWM Recovery and install google apps on the M512.
I'm not responsible for any damage
Rooting:
Method 1
1.Go to settings>>Security>>Check Unknown Sources tap OK.
2.Download this file.
3.Install
4.Run and tap 'get root' or somthing like that.
5.Delete KingRoot and some chinese app, but DO NOT DELETE KingUser!
6.Done!
Method 2
Flash CWM Recovery using the 2nd method from this post. If you have rooted usign the first method use method 1 from that post.
Download UPDATE-SuperSU-x.xx.zip (i used 2.46)
Reboot into CWM.
Select Install zip>choose zip from /sdcard>select UPDATE-SuperSU-x.xx.zip, press power button
Reboot now
GApps
1.Download this zip file
2.Reboot into CWM.
3.Select Install zip>choose zip from /sdcard>select the file, press power button
4.Reboot now.
How to delete KingUser (only if you have SuperSU and it is working)
Download ES File explorer, enable root explorer, go to /system/app and delete KingUser.
So this is how to get root, cwm and gapps on the m512.
First Method no good for me
I put the kingroot file in the adb tools folder and used the install command. It wasn't clear from the above whether the phone needed to be in recovery or some other mode so I tried a few times, in recovery mode and again just connected as an mtp device in the normal way. Either way the result was the same, it said "Invalid APK File: KingRoot.......".
I will have a go at the CWM thing next.
I am still on the 103A ROM that the phone came to me with - I have been trying, on and off, without success to update and then root it , for months.
When trying to flash an update ROM it tells me that the update package has unexpected contents and the there is an error in the update file and then says "Status 7". You can read all about my lack of success on this forum under the threads M512 started by Galaxy Why.
I'm trying, I really am....
Let me start by saying thanks for making the effort to post what you know and so to help people like me, however.
I tried to follow the method 2 (as I don't have root) from your other post (the one linked to above with the words "the 2nd method from this post" but got stuck.
Your instructions in normal my comments in italics.
Method 2: (No root)
1.Connect your phone via USB to your PC. OK
2.Enable MTP. OK
3.Enable USB Debugging. Settings>Developer Options> tick USB Debugging. OK
4.On your computer, 2 drives will appear: One of them is a CD-Rom which contains all drivers. OK
5.Click on that CD-Rom and it will install all drivers. It doesn't, or it may do, but what it definately does is asks me to put a disc in the drive and tries to do some kind of dir_all in windows explorer - I would post a screenshot here but this page only allows URL's- and I'm not sure how to go about that.. but I think I've managed to upload a screenshot....
After waiting for 5 minutes or so to see if something would happen as the green progress bar ground to a halt but the busy circle continued I hit the cancel button on the "please insert a disc dialogue" and then ploughed on anyway ....
6.Plug phone in again. Now this had me confused, I assume you mean unplug AND THEN plug the phone in again.
7.Download the .ZIP file and extract it somewhere. Which/what zip file do you mean exactly?? I couldn't get past this.
8.Click on _install_cwm_6.0.5.1.cmd
9.Your phone will ask you something, just tick "always allow from this computer" and hit OK.
10.Your phone will reboot into DL Mode, then it will reboot again.
11.Recovery is installed.
It's late and I'm tiring so sorry if missed something obvious. Any advice?
androo235 said:
Let me start by saying thanks for making the effort to post what you know and so to help people like me, however.
I tried to follow the method 2 (as I don't have root) from your other post (the one linked to above with the words "the 2nd method from this post" but got stuck.
Click to expand...
Click to collapse
Looks like you don't have a adb driver
And... why do you want to root your phone? Installing CWM is not root required.
M512 comes with a unlocked bootloader, just boot into bootloader and you can flash anything you like.
I made a customized stock rom based on version 2280, bloatwares removed and Google Play framework included. (You can download the apps back from Play Store, if you needs those)
Now the phone has 2.09GB free spaces :victory:
If you were interested on it, I can upload it and give you a link.
PochiMak said:
Looks like you don't have a adb driver
And... why do you want to root your phone? Installing CWM is not root required.
M512 comes with a unlocked bootloader, just boot into bootloader and you can flash anything you like.
I made a customized stock rom based on version 2280, bloatwares removed and Google Play framework included. (You can download the apps back from Play Store, if you needs those)
Now the phone has 2.09GB free spaces :victory:
If you were interested on it, I can upload it and give you a link.
Click to expand...
Click to collapse
I am interested in the custom rom you made for this phone. There's so little info on this model.
Lorien_Silmaril said:
I am interested in the custom rom you made for this phone. There's so little info on this model.
Click to expand...
Click to collapse
https://copy.com/3IfoZUCTCna1wa3U
The calendar is not working, you can install Google calendar from Play Store.
PochiMak said:
https://copy.com/3IfoZUCTCna1wa3U
The calendar is not working, you can install Google calendar from Play Store.
Click to expand...
Click to collapse
How do I install this?
GalaxyWhy said:
How do I install this?
Click to expand...
Click to collapse
Flash this ROM by a "3rd party recovery" = CWM
I just wonder how many of you are still using this device?
PochiMak said:
I just wonder how many of you are still using this device?
Click to expand...
Click to collapse
Just me, I think.
Can you give another link to your ROM, please, the one you put days ago doesn't works.
Thank you.
it's works for me. thx~