Need Help plz! - Samsung Galaxy S II Plus

i've a problem with my s2 plus gt-i9105 *ROOTED*
first my home button has been damaged .
sec, i wanted to download a new update to my device , i mean the 4.2 official update , still on the 4.1.2 :3
third i tried many apps such like : power menu , reboot menu , quick reboot and also the terminal Emulator .
is there any way to get to download mode , it seems to me it's disabled !
Any help plz !

MohamedBakr said:
i've a problem with my s2 plus gt-i9105 *ROOTED*
first my home button has been damaged .
sec, i wanted to download a new update to my device , i mean the 4.2 official update , still on the 4.1.2 :3
third i tried many apps such like : power menu , reboot menu , quick reboot and also the terminal Emulator .
is there any way to get to download mode , it seems to me it's disabled !
Any help plz !
Click to expand...
Click to collapse
I think that there's an Xposed module with which you can customize power menu, then it offers to boot to recovery, bootloader, etc. I can't check it right now, because I'm on Lollipop.

THANKS GUYS for help , i appreciate it so much

Related

I have very Bad Problem !!!! plz help me

I Have a GT-I9001 S Plus and I had a security lock on it , Some of my friends entered the wrong password and my phone show me a too many lock pattern !!! iknow this Error and iknow ways to fix this problem (1.Factory reset 2.Flash my phone ) but when i ganna go to recovery menu and press the Up (volume) + home + power get Ram Dump Message and when i press just Up(volume) + power and I see the Samsung logo and after a few seconds i see android box ,After a few seconds my mobile is reboot and boot normaly , when i try to flashing with odin progrm all step is pass , and my phone be restart but when again see a android box with progress bar again reboot normaly . and No changes will occur. what sholud i do ?? plz help me .
ITRY TO RECOVERY MENU AND SEE A MANY TAPIC AND TRY EVRY WAY I VERY TIERD
taromarka2 said:
I Have a GT-I9001 S Plus and I had a security lock on it , Some of my friends entered the wrong password and my phone show me a too many lock pattern !!! iknow this Error and iknow ways to fix this problem (1.Factory reset 2.Flash my phone ) but when i ganna go to recovery menu and press the Up (volume) + home + power get Ram Dump Message and when i press just Up(volume) + power and I see the Samsung logo and after a few seconds i see android box ,After a few seconds my mobile is reboot and boot normaly , when i try to flashing with odin progrm all step is pass , and my phone be restart but when again see a android box with progress bar again reboot normaly . and No changes will occur. what sholud i do ?? plz help me .
ITRY TO RECOVERY MENU AND SEE A MANY TAPIC AND TRY EVRY WAY I VERY TIERD
Click to expand...
Click to collapse
Did you back up your phone before you started flashing?
Moved to General Q&A.
my data is not Important
poweredbymugen said:
Did you back up your phone before you started flashing?
Click to expand...
Click to collapse
No, I didnt , my informaiton in my phone is not Important , I cant flashing and factory reset ,

How to flash Micromax Funbook Infinity P275 + unbrick micromax funbook infinity

Hi guys this is a simple tutorial on how to flash Micromax Funbook Infinity. :highfive:
Download this things :-
Firmware Version 1 from here : (Tested and lite version)
http://www.moulnisky.com/index.php?dir=Micromax/P275/V1_10.09.2012/
Firmware Version 2 from here : (Not tested Heavy version)
http://www.moulnisky.com/index.php?dir=Micromax/P275/V2_25.09.2012/
Download Livesuite from here :
http://www.mediafire.com/download/z4vq2w25dz921ed/LiveSuit.zip
Download Usb drivers from here :
http://www.moulnisky.com/index.php?dir=Micromax/P275/Download Tool/&file=USBDriver.rar
So here we go :
1.Extract the live suite in a new folder.
2.Extract the usb drivers in other folder and the Rom file in other folder.
3.No shutdown your tablet using power button.
4.Open the livesuite.exe and select the first option on top.
5.Then select the img file of rom.Then minimize livesuite.
6.Press and hold the reset button of P275 and connect it to the PC using data cable and press the power button 6-10 times till you here a sound. Then remove your hand from the reset button and keep the tab in separate place.
7.If the drivers in not recognized by your pc then open control panel and go to device manager.Then right click on the unrecognized device. and install the driver manually but making the path as the driver extracted folder.
8.Then 2 massage will pop up. Yes them.
9.Wait for the flash complete.
10.After it is done restart it once and hurray you a flashed your tab :victory:
Hit the thanx button :good:
*For any help just comment here.
*Try it on your own risk.
Hi,
I am getting an error msg 403, saying that forbidden from downloading the file. Pls advice. I have a bricked P275, which went totally blank while trying to load Fun Series ROM v3.0. No response to power button, Reset button. Cannot get it into recovery mode as well. Your advise appreciated.
bhaumang said:
Hi,
I am getting an error msg 403, saying that forbidden from downloading the file. Pls advice. I have a bricked P275, which went totally blank while trying to load Fun Series ROM v3.0. No response to power button, Reset button. Cannot get it into recovery mode as well. Your advise appreciated.
Click to expand...
Click to collapse
First of all sorry for late reply Thanx for telling me about the links [LINKS FIXED] You hard bricked your FB so you can try to flash you FB as per my tutorial and if it doesnt works then.If you have warranty give it to the service center and tell them lie,they will replace it. Or throw that tab out of the window and forget it. It is impossible to recover funbook infinity from hard brick.
bhaumang said:
Hi,
I am getting an error msg 403, saying that forbidden from downloading the file. Pls advice. I have a bricked P275, which went totally blank while trying to load Fun Series ROM v3.0. No response to power button, Reset button. Cannot get it into recovery mode as well. Your advise appreciated.
Click to expand...
Click to collapse
But before talking it to Service Center Download the Rom from here ==>> www.4shared.com/rar/8tDZoqRq/Micromax_Funbook_Infinity_P275.html
Thanks, I guess. I will try taking it to the Service centre.
micromax flash
EmoBlazeXD said:
Hi guys this is a simple tutorial on how to flash Micromax Funbook Infinity. :highfive:
hello guys thanks for this tutorial but I want to know what to do with the firmware version 1 and 2
thanks
Click to expand...
Click to collapse
Elysée18 said:
EmoBlazeXD said:
Hi guys this is a simple tutorial on how to flash Micromax Funbook Infinity. :highfive:
hello guys thanks for this tutorial but I want to know what to do with the firmware version 1 and 2
thanks
Click to expand...
Click to collapse
Both are stock roms. Ver 1 is lighter than ver 2 however Ver 2 has more stability,faster,has inbuilt ram cleaner,updated apps.
HIT THE THANX BUTTON IF HELPED
Click to expand...
Click to collapse
micromax flash
EmoBlazeXD said:
Elysée18 said:
Both are stock roms. Ver 1 is lighter than ver 2 however Ver 2 has more stability,faster,has inbuilt ram cleaner,updated apps.
hello
I tried to do the flash but not working I pressed and hold the reset button as you said but when I connect the device to the PC and pressinf the ON/OFF button I did not hear any sound.
My tablet is showing only the start logo when I turn it ON and it's still like that
I thinked that it will be possible to flash it, some times if I press the menu button and the ON/OFF button the tablet show a android logo with a red warning icon.
If you have some idea, please help me
I put in attachement the android logo shown
thanks
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Elysée18 said:
EmoBlazeXD said:
Elysée18 said:
Both are stock roms. Ver 1 is lighter than ver 2 however Ver 2 has more stability,faster,has inbuilt ram cleaner,updated apps.
hello
I tried to do the flash but not working I pressed and hold the reset button as you said but when I connect the device to the PC and pressinf the ON/OFF button I did not hear any sound.
My tablet is showing only the start logo when I turn it ON and it's still like that
I thinked that it will be possible to flash it, some times if I press the menu button and the ON/OFF button the tablet show a android logo with a red warning icon.
If you have some idea, please help me
I put in attachement the android logo shown
thanks
Click to expand...
Click to collapse
First open live Suite. Then select the image. then minimize it. then Take your tab.hold the reset key. then while pressing it connect it to the data cable. after connecting. press the power key 5-10 times (dont leave the reset button) .You should here a sound then and the massage pop ups. I any problem comment it or add me in facebook www.facebook.com/emoblazeXD and chat me so that I can give you live instructions
Click to expand...
Click to collapse
Click to expand...
Click to collapse
hey help stuck on boot animation will dis work for it also
and cwm is also not booting
Is there any way to permanently rotate screen or change default orientation ?
Problem is when we watch any thing on this it remains in only one direction pointing all btns & ports downwards So we can not watch when external pendrive is attached if we can rotate screen permanently this problem will be solved...
So i need to rotate screen while paying video pointing all ports & btns upwards ...
Elysée18 said:
EmoBlazeXD said:
Elysée18 said:
Both are stock roms. Ver 1 is lighter than ver 2 however Ver 2 has more stability,faster,has inbuilt ram cleaner,updated apps.
hello
I tried to do the flash but not working I pressed and hold the reset button as you said but when I connect the device to the PC and pressinf the ON/OFF button I did not hear any sound.
My tablet is showing only the start logo when I turn it ON and it's still like that
I thinked that it will be possible to flash it, some times if I press the menu button and the ON/OFF button the tablet show a android logo with a red warning icon.
If you have some idea, please help me
I put in attachement the android logo shown
thanks
Click to expand...
Click to collapse
Sorry for late reply.It is happening because you are going into recovery mode.If you press and hold power and the rest together then it will go into recovery mode.
Just do what I say. Press and hold the reset button then connect the tab with data cable to your pc while holding the rest button.After connecting press the power button 7-10 times until you hear a sound.Then release the reset button.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Micromax P275 power button problem
Hi,
Plz kindly read this long note with patience ....
I'm facing a unique problem, don't know if anybody has faced the same. I bought mmx p275 by the end of March and it was working fine with some performance issues sometimes. One day I happened to put the tab on charging and when I pressed the power button to check the battery level, it suddenly flashed a message that tab was encrypted and it is going for factory reset. After it booted all my apps were lost. I again installed them but to my surprise, my tab became smoother and faster than before. I then rooted it to install some system monitoring apps n everything was working like charm. By mid-August the real problem started, its left speaker stopped working; I knew now I'll have to go to the service center, which I always wanted to avoid at least for mmx. However, I couldn't manage time to go there.
Now coming to the real problem, in the month of September a friend gave me a game (he played in his mmx p275) which as soon I installed avast blocked it as a virus. I somehow managed to uninstall the app, after 2 days the tab started to malfunction, became slow and more importantly the power button stopped functioning, I thought power button's days were over. I was unable to use the tab, as you know it only works through that button. After someday I put it on charging (it was entire time wake as I was unable to shut it down), then I casually pressed the power button and to my surprise it responded. Thought finally problem was solved. But no it was only the beginning, next whenever I pressed the power button sometimes it would work like normal and sometimes it would automatically shut the tab down with a thud sound. Whenever it does so the date and time resets to 2 Jan 1970, 5.30pm. In addition, it boots automatically say after 3-4 hours. Now the button does not respond whenever it is connected to charger or computer and after its disconnection, it takes 2-3hrs to respond. Otherwise, it works with a mind of its own. Thinking of the virus effect, I put the tab on factory reset thrice but to no avail. Now I'm in a fix as what the problem - is it hardware or software. Before taking it to the hopeless service center, I want to check all other alternatives. Plz plz help me out.
N.B. Except rooting I've done no customization.
Thanks.
:crying:
help...
rom file in torrent plz help.....
links are broken pls post updated links.
275
andy body help me i have 5 funbook 275 not flashing
live suit not working shows an error
Hi there the live suit tool that you mentiond in above link is not working. when i open the exe file it shoes me an error of install drivers. i tried to install the driverinstaller.exe but wont run. please help me with this crisis
Helpful guide. Thumbs up OP
Download links not working
Download links of Version 1 & Version 2 are not working Bro!!!
File locations
It seems the flash files are no longer available. Does anyone know from where I can download?

Zenfone 5 Bootlooped

I today got my Zenfone 5 ( A500CG ) on either Android 4.3 or Android 4.4 IDK , actually heres what happened -
I put the device to update and when it was updating , I stupidly was pressing the power up + volume down key ( Im guessing it had effect of just power up , coz bootloader comes wid power up + volume up ) , it then shut down. And BAM , its now hit a frekin bootloop ( I believe it has , coz wen I press power key to turn on , it instead shows ASUS logo , something and then USB logo , all in a 1 second or so )
I'm really pissed with that , and I really am pretty much a noob with Android , so I desperately need help , pls help me. If you know any guide or something , or if you know what I should do , pls let me know.
P.S - In Android Software Recovery , when I wipe data or cache , it just shows some error and it had no effect
And BTW TBH IDK how I got in ASR LOL
PLZ HELP MEEEEEEE
NeXuS7FHD2K13 said:
I today got my Zenfone 5 ( A500CG ) on either Android 4.3 or Android 4.4 IDK , actually heres what happened -
I put the device to update and when it was updating , I stupidly was pressing the power up + volume down key ( Im guessing it had effect of just power up , coz bootloader comes wid power up + volume up ) , it then shut down. And BAM , its now hit a frekin bootloop ( I believe it has , coz wen I press power key to turn on , it instead shows ASUS logo , something and then USB logo , all in a 1 second or so )
I'm really pissed with that , and I really am pretty much a noob with Android , so I desperately need help , pls help me. If you know any guide or something , or if you know what I should do , pls let me know.
P.S - In Android Software Recovery , when I wipe data or cache , it just shows some error and it had no effect
And BTW TBH IDK how I got in ASR LOL
PLZ HELP MEEEEEEE
Click to expand...
Click to collapse
this is the only possible help i can find. if this is no help, you may be stuck.
you never ever want to do anything to a device when its updating or flashing.
Unfortunately its no good. It's what I hv been trying.
NeXuS7FHD2K13 said:
Unfortunately its no good. It's what I hv been trying.
Click to expand...
Click to collapse
any luck yet?

how to back to stock rom

Dear All,
I would like to kindly ask you how to back to stock rom?
I found thread with the step-by-step, but i am not able to remove the battery from my tablet.
I have currently cm 10.1.3., tablet: gt-p5100 (3g+wifi)
Thank you in advance.
Rgrds
well, there is no need for removing battery, first backup all your data also in internal storage , Use triangleAway to reset your counter for Official system status and getting OTA updates, download it , open and grant it supersu, click reset flash counter , when its done , power off , press vol down plus the power button it will say promt to continue , click vol up to continue , install usb drivers on your pc , connect your tablet to pc , open odin it should say added in the white info box , click on PDA and select the stock rom file "tar.md5" you downloaded from sammobile and then press start wait for it to end and then reboots , after that unplug your tablet , hold on your power button it'll reboot now quickly press on vol up + power again then release power when you the tablet logo appears and then in recovery select wipe data and perform it then click reboot and voila you got your stock rom back
Thread here http://forum.xda-developers.com/showthread.php?t=1856532 followed it many times.
hi,
I have another issue with my tablet.
When the flashing was done and the device was rebooted, my tablet starts with white screen. unfortunately i am not able to add the link from the outside of the xda forum.
I've tried to flash it with official Polish ROM (version 4.2.2) branded by T-Mobile.

[HELP] Custom Binary is blocked by FRP Lock. What is That?

Hi Guys.
So I downloaded the new A5 (2016) ROM for our samsung galaxy j700F and put it in the sd card.
When I boot to recovery, (shut down + volume up + power + home) it shows
Custom Binary is blocked by FRP Lock in red letters and the phone shuts down (does not boot into recovery)
I took out the battery and inserted it again. Again the same problem.
But when i Simply turn it off holding power button, it turns on (no bootloop)
Then my question is guys what seems to be the problem? How can it be solved because i am dying to try this new ROM.
Please Help
Thanks in advance (don't worry i will click the thanks button too :laugh: )
Thanks & Regards
AyushJ
Ayushj702 said:
Hi Guys.
So I downloaded the new A5 (2016) ROM for our samsung galaxy j700F and put it in the sd card.
When I boot to recovery, (shut down + volume up + power + home) it shows
Custom Binary is blocked by FRP Lock in red letters and the phone shuts down (does not boot into recovery)
I took out the battery and inserted it again. Again the same problem.
But when i Simply turn it off holding power button, it turns on (no bootloop)
Then my question is guys what seems to be the problem? How can it be solved because i am dying to try this new ROM.
Please Help
Thanks in advance (don't worry i will click the thanks button too :laugh: )
Thanks & Regards
AyushJ
Click to expand...
Click to collapse
Go in developer option and enable oem unlocking
Mandy $ingh said:
Go in developer option and enable oem unlocking
Click to expand...
Click to collapse
already enabled
reflash firmware bro..
Ayushj702 said:
Hi Guys.
So I downloaded the new A5 (2016) ROM for our samsung galaxy j700F and put it in the sd card.
When I boot to recovery, (shut down + volume up + power + home) it shows
Custom Binary is blocked by FRP Lock in red letters and the phone shuts down (does not boot into recovery)
I took out the battery and inserted it again. Again the same problem.
But when i Simply turn it off holding power button, it turns on (no bootloop)
Then my question is guys what seems to be the problem? How can it be solved because i am dying to try this new ROM.
Please Help
Thanks in advance (don't worry i will click the thanks button too :laugh: )
Thanks & Regards
AyushJ
Click to expand...
Click to collapse
Search from google, FRP unlock
Custom binary blocked by FRP
Ok, so I have the same problem. So I attempted to reflash the firmware, successfully, did not allow me to remove the FRP. Tried the reset method I have for odin, works for phones 2016 and older, not this phone, nor my other J3's. Any input would be greatly appreciated.
CAustin318 said:
Ok, so I have the same problem. So I attempted to reflash the firmware, successfully, did not allow me to remove the FRP. Tried the reset method I have for odin, works for phones 2016 and older, not this phone, nor my other J3's. Any input would be greatly appreciated.
Click to expand...
Click to collapse
I had the same problem ,my device didn't accept any stock or custom roms ,you will need to try many stock roms until you find a one that your device will work with, but it will not get the device totally stock ,This is what happened to my device J700H now I am searching for a way to get around the error " sw rev check fail device 3 binary 2"
I hope my words help you ......

Categories

Resources