[ROM][5.0.2] FalRom V1[Falcon] - Moto G Android Development

About FalRom :
We just want to make your android experience even better Than Ever
Features :
Same as CyanogenMod
Features under the hood
All Best Features Of Every Custom Rom Out There
Installation
-Read everything carefully
-download Rom and Gapps
-boot into recovery
-perform a Fullwipe (you dont have to wipe your internal SD)
-flash Rom
-flash Gapps
-Have Fun!!!
First boot will take time
download :
https://www.androidfilehost.com/?fid=95916177934522533
ROM OS Version: 5.0.2 Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Created 2015-02-3
Last Updated 2015-02-03
Hit Thanks Button

Lag in videos with this ROM?
XDA signature:
Tap-a-talked from Moto G running Resurrection Remix / Stock Kernel

Any screenshot here?

The ROM isn't zipped properly, so flashing fails. Also, this isn't even a source-build. It's just a rezipped nightly.

Need to be described MORE
Go by the rules. Please describe the ROM in a proper way.

Have some respect, where do you get off making demands, some thngs are better left said in private or not at all

Related

TouchWiz Rom For Gionee Gpad G2

TouchWiz ROm
Android Version : 4.3
Rom Features: Note 3
Copyrights: DevSkilled
Bug Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/ GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Touchwiz Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder in root od SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>TouchwizRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
16.Reboot Phone
17.Done Now Enjoy
N.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
TouchWiz Rom-Gionee Gpad G2, ROM for all devices (see above for details)
Contributors
DevSkilled
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.3
Stable Release Date: 2014-07-04
Current Beta Version: 4.2.x
Beta Release Date: 2014-07-01
Created 2014-07-04
Last Updated 2014-07-05
1.5mb custom rom?
DevSkilled said:
TouchWiz ROm
Android Version : 4.3
Rom Features: Note 3
Copyrights: DevSkilled
Bug Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/ GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Touchwiz Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder in root od SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>TouchwizRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
16.Reboot Phone
17.Done Now Enjoy
N.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
TouchWiz Rom-Gionee Gpad G2, ROM for all devices (see above for details)
Contributors
DevSkilled
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.3
Stable Release Date: 2014-07-04
Current Beta Version: 4.2.x
Beta Release Date: 2014-07-01
Created 2014-07-04
Last Updated 2014-07-05
Click to expand...
Click to collapse
?I already have a viper4androidfx on my fone, do I download another?
You also promised a kitkat for this device
Camera Flash not available? You mean camera is not working?
What bugs did you notice on the rom
That is not Rom Zip
haykay2005 said:
?I already have a viper4androidfx on my fone, do I download another?
You also promised a kitkat for this device
Camera Flash not available? You mean camera is not working?
What bugs did you notice on the rom
Click to expand...
Click to collapse
Please Read : 1. a/b
Extract zip and open readme , you will find download link there.
And Kitkat Doge mod will be upoad tomorroe
Kitkat Pure Xperia IS ready And will be published Today
This rom is very beautiful and smooth. But front camera not working. Please make a fix patch...
Same problem is front camera not work with flash problem fix this
And
map
local
Not work
Unfortunately stopped app solve please
But thanks provide DevSkilledBug Fixed By : Marian Trinca new rom service 4 gionee
Fix please... Thank you very much !!!
https://www.youtube.com/watch?v=18PTh14Layc

[ROM][STABLE][DEODEXED] Custock Lite Rom 1.4 for GT-S7580

Hi guys,
I've built a new, simple rom for the Samsung Galaxy Trend Plus.
Check out the details below:
About the rom:
Custom Stock Rom (GT-S7580)
This rom is made for all S7580 devices and is based on pure stock touchwiz by Samsung.
The differences are big though.
You’re allowed to theme the rom yourself, because we have deodexed this rom.
You can also use it to unbrick your phone, without a pc or making use of the program: Odin.
Other than that, you can feel its smoothness and see that it is lite, because
lots of useless apps and files are removed from the system.
Download:
Click here to download!
Main Features:
*Malware removed
*Removed useless system apps
*Optimized RAM usage
*Deodexed
*Zipaligned
*Added ability to flash the rom without wiping data/cache partitions
*Added some small performance tweaks
We have kept the rom tweaks minimalistic, because this rom was created with the goal to make it as lite and smooth as possible.
Changelog:
What is new in version 1.4?
*Fixed dialer and contacts bug
*Fixed Systemui FC's
*Zipaligned and recompiled seccontacts.apk and secsettings.apk succesfully
*Fixed Setup Wizard FC's
*Decreased /system partition size
These bugfixes made the rom stable!
Please do NOT use or republish my work to some other site, without asking for permission! Non of the files may be used in an inappropriate way! When you have our permission, don’t forget to add credits to the post!
Click to expand...
Click to collapse
I’m NOT going to be held responsible for any damage YOU cause on your device! If your device somehow got bricked or any other problem occured, I won’t give support in such case at all! Don’t try this if you don’t know how to flash a custom recovery and rom!
Click to expand...
Click to collapse
Installation Instructions:
All roms we make are different, but the installation procedure is the same:
(Requirements)
*Make sure you’re rooted!
*Make sure you have Sandpox’s CWM or TWRP recovery installed!
(Other recoveries are not recommended!)
(Steps)
1. Download a rom and put it in the root directory of the sd card or main storage.
2. Power off your device.
3. Boot your device into recovery mode by pressing (power button), (menu button) and (volume up button) at the same time.
When the Samsung logo shows up, you can release the buttons.
4. When you’re device is booted in to recovery mode, move the volume buttons to select.
5. Format /system, /data and /cache! This must be done, otherwise the rom won’t load everything correctly!
5. Select ‘update from sd card’ or ‘update from internal storage’.
It depends on where your rom file is located.
6. Select the rom and press the power button.
7. Select yes.
8. The rom will be flashed, this can take a while.
9. Reboot the device and you’re good to go!
Make sure you wipe system, data and cache, before or afterwards.
This will make the installation clean and can prevent eventual bugs.
If you have problems with flashing, comment below.
This is not our only project, we're working on more roms.
Check them out on our website here!
You'll find all roms with their details. You can also check out the rom logs and updates sections to read all news regarding the progress of the development.
Have a nice day
Marvin
XDA:DevDB Information
Custock Lite v1.4 (GT-S7580), ROM for all devices (see above for details)
Contributors
mrmarvin_16, Marvin (me), Kostas, Andrea and Petr (Team 4DMP)
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: v1.4
Stable Release Date: 2015-05-06
Created 2015-05-24
Last Updated 2015-05-24
Which Roms on Download Page ?
4DMP XtremePLUS 5: Download Cyanogenmod 11 by Sandpox (stable): Download
4DMP XtremePLUS 6: Download Cyanogenmod 12.1 by Sandpox (stable): Download
4DMP CustockTP Rom: Download -
MIUI 6 [WIP] ?
mrmarvin_16 said:
Hi guys,
I've built a new, simple rom for the Samsung Galaxy Trend Plus.
Check out the details below:
About the rom:
Custom Stock Rom (GT-S7580)
This rom is made for all S7580 devices and is based on pure stock touchwiz by Samsung.
The differences are big though.
You’re allowed to theme the rom yourself, because we have deodexed this rom.
You can also use it to unbrick your phone, without a pc or making use of the program: Odin.
Other than that, you can feel its smoothness and see that it is lite, because
lots of useless apps and files are removed from the system.
Download:
Click here to download!
Main Features:
*Malware removed
*Removed useless system apps
*Optimized RAM usage
*Deodexed
*Zipaligned
*Added ability to flash the rom without wiping data/cache partitions
*Added some small performance tweaks
We have kept the rom tweaks minimalistic, because this rom was created with the goal to make it as lite and smooth as possible.
Changelog:
What is new in version 1.4?
*Fixed dialer and contacts bug
*Fixed Systemui FC's
*Zipaligned and recompiled seccontacts.apk and secsettings.apk succesfully
*Fixed Setup Wizard FC's
*Decreased /system partition size
These bugfixes made the rom stable!
Installation Instructions:
All roms we make are different, but the installation procedure is the same:
(Requirements)
*Make sure you’re rooted!
*Make sure you have Sandpox’s CWM or TWRP recovery installed!
(Other recoveries are not recommended!)
(Steps)
1. Download a rom and put it in the root directory of the sd card or main storage.
2. Power off your device.
3. Boot your device into recovery mode by pressing (power button), (menu button) and (volume up button) at the same time.
When the Samsung logo shows up, you can release the buttons.
4. When you’re device is booted in to recovery mode, move the volume buttons to select.
5. Format /system, /data and /cache! This must be done, otherwise the rom won’t load everything correctly!
5. Select ‘update from sd card’ or ‘update from internal storage’.
It depends on where your rom file is located.
6. Select the rom and press the power button.
7. Select yes.
8. The rom will be flashed, this can take a while.
9. Reboot the device and you’re good to go!
Make sure you wipe system, data and cache, before or afterwards.
This will make the installation clean and can prevent eventual bugs.
If you have problems with flashing, comment below.
This is not our only project, we're working on more roms.
Check them out on our website here!
You'll find all roms with their details. You can also check out the rom logs and updates sections to read all news regarding the progress of the development.
Have a nice day
Marvin
XDA:DevDB Information
Custock Lite v1.4 (GT-S7580), ROM for all devices (see above for details)
Contributors
mrmarvin_16, Marvin (me), Kostas, Andrea and Petr (Team 4DMP)
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: v1.4
Stable Release Date: 2015-05-06
Created 2015-05-24
Last Updated 2015-05-24
Click to expand...
Click to collapse
Perfect ROM, I like it more than TurboTrend rom and CM11
Thanks a lot!!!
Help
i followed the instructions and the instaation failed?!
I can not use the busybox commands in Terminal when flashing this ROM, this is a serious error hoping you will fix it!

[ROM][5.1.1][64bit][A6000/plus][RessurectionRemix5.5.8]

Introducing pure Resurection RemixOS with Android 5.1.1 version 64 bit ( CM12.1 ) for Lenovo
A6000/Plus
ROM Author: Stuep D
Requirements:
Your device should be on Stock Lollipop ROM (if you still on Kitkat you must upgrade to Lollipop first, see tutorial here to upgrade it to Lollipop)
Install TWRP Recovery tutorial here
Download NEW Resurection Remix 5.1.1 ROM from here https://drive.google.com/file/d/0Bxq...VG8/view?pli=1
Installing Resurection Remix Cyanogenmod 12.1 on Lenovo A6000
Copy the ROM and GAPPS in your SD card
Boot into Recovery
Switch off your device
Reboot to TWRP recovery ( tutorial here )
Make full wipe including “system” (data, dalvik, system, cache)
Now go back and click install
Search for the ROM that downloaded before then flash it
Reboot (the first boot can take up to 2 minutes) XDAevDB Information
RessurectionRemix 5.5.8 ROM for lenovo-a6000
ISSUES:
Some Apps force close upon restoration through Titanium Backup.
SOLUTION:
Uninstall those Apps and then install again from Play store or from other stores.
Contributors
Stuepd
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2016-01-16

[Rom] Official Lineage OS 14.1 for Falcon

Lin·e·age
/ˈlinēij/
noun
1.lineal descent from an ancestor; ancestry or pedigree.
2.a sequence of species each of which is considered to have evolved from its predecessor.​
Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
Download & Install
LINKs:
Rom
Changelog
OpenGapps choose ARM>7.1>micro/nano/pico (micro might still be too big... unless you use the custom install options that allows you not to install everything from the package)
REMEMBER:
ONLY use TWRP 3.0.2-1 or up​HOW TO INSTALL
Requirements: Unlocked Bootloader, a Nougat compatible Custom Recovery and the Downloaded Zips.
1.Place the rom and other like Gapps on the internal Storage or on a USB OTG
2.Reboot to recovery using the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
3.Do Wipes (Data, Cache, Dalvik and System partitions) if you are in a different ROM.
4.Select the Zips
5.Swipe to install (if using TWRP)
6.Reboot and wait 2-3 min​
Flash This to have system root access
READ POST 2 BEFORE FLASHING
XDA:DevDB Information
[Rom] Lineage OS 14.1 for Falcon, ROM for the Moto G
Contributors
Allstargaurav
Source Code: https://github.com/lineageos
ROM OS Version: 7.x Nougat
ROM Firmware Required: CyanogenMod13
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2017-01-21
Last Updated 2017-01-26
HOW TO DIRTY UPDATE
1.Download the rom zip
2.Reboot to recovery using the power menu or the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
3.Do Wipes (Cache, Dalvik)
4.Flash the Zip(No Need To flash Gapps)
5.Reboot and wait 2-3 min
HOW TO CLEAN UPDATE :
1.Download the rom zip and make sure you have gapps zip on your device
3.Reboot to recovery using the power menu or the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
5.Format /system, /cache and /dalvik-cache (advance format in wipe menu of TWRP); do NOT Wipe DATA
6.Install zip
7.Reboot and wait 2-3 min
EXPERIMENTAL:-This build will allow you to ‘upgrade’ from CM to the signed LineageOS weekly
How To install EXPERIMENTAL
1.Download experimental and nightly zip
2.Boot into Recovery
3..Install experimental migration build on top of cm-14.1 build
4.Reboot
5.Install LineageOS weekly build
6.Reboot
7.Re-setup your application permissions
You might want to state that this is not the official version. There might be a bit of confusion otherwise because official builds will be available this weekend.
ahmad.o said:
You might want to state that this is not the official version. There might be a bit of confusion otherwise because official builds will be available this weekend.
Click to expand...
Click to collapse
Is it Better Now
It's better to put unofficial tag in title too. Not just as announcement. People might not notice it.
Edit: Just saw your edit.
Please ask a moderator to post it on the android development, doesn't belong here.
Aayushya said:
Please ask a moderator to post it on the android development, doesn't belong here.
Click to expand...
Click to collapse
I will make this Offical Lineage thread as soon as weekly starts rolling
Lineage based on aosp?
Any screenshoots?
Pierre2324 said:
Lineage based on aosp?
Click to expand...
Click to collapse
its more cm based
Great?
Testing. So far so good.
Just installed on xt1032 and looks amazing! Does this get OTA? Or do I have to flash new roms?
What about ram usage Nougat seems bad always low ram on every rom
Pierre2324 said:
What about ram usage Nougat seems bad always low ram on every rom
Click to expand...
Click to collapse
to me is about 240 mb free, anyway nougat runs very well
Wifi sometimes turn down. This is unique bug I found
Working without issues here. :good::good::good:
fix for bluetooth pairing?
Reserved...
Is the op actually a contributor or just putting the thread up?

[ROM][6.0_r79][UNOFFICIAL] LineageOS 13 for Vernee Mars

This is LineageOS 13 for Vernee Mars.
You need to be on the stock MM firmware with TWRP in order to flash this rom!
I am not to be held responsible for bricked devices,you are flashing this on your own accord. BE WARNED!
Installaion:
1. Downlaod the rom and gapps
2. Flash the MM TWRP
3. Wipe the System, Data, Cache and Dalvik
4. Flash the rom and gapps
Not working:
-HDR
Working:
-everything else?
Download
Device tree: HERE
Kernel source: HERE
Vendor tree: HERE
XDA:DevDB Information
LineageOS for Vernee Mars, ROM for all devices (see above for details)
Contributors
The Marionette, Alberto96
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Created 2017-05-12
Last Updated 2017-05-12
Changelog:
-12.5.2017.
-initial release
-13.5.2017.
- include Snap Camera(does the work much better)
- make sure the boot animation is smoother(TIP you can simply download the LineageOS boot animation from another source,only the one in the build lags for some reason)
please post the flash procedure
bluetooh not work properly, i cant connect to my parrot
vaorr said:
bluetooh not work properly, i cant connect to my parrot
Click to expand...
Click to collapse
Hmm,that's odd. Bluetooth works fine for me,I successfully connected to another phone and sent files without a single error.
Thanks. This rom is great

Categories

Resources