While attempting to install CyanogenMod 10.2 through CWM (6.0.4.6, from dasunsrule32), I got the following error:
assert failed: getprop("ro.product.device") == "tf700t" || getprop("ro.build.product") == "tf700t"
Click to expand...
Click to collapse
It may be worth noting that my device was already running Android 4.2, since the CM wiki instructions seem to assume an older version.
Installing TWRP and installing CM through that instead worked. I don't have enough posts to comment on the original CM thread in the Dev forum, but I wanted to report this bug and leave the note so other users might find the fix later. If someone with enough posts would like to cross-post this in the appropriate Dev forum thread (or otherwise make dasunsrule32 aware of the issue), it'd be much appreciated.
CWM
jschuster said:
While attempting to install CyanogenMod 10.2 through CWM (6.0.4.6, from dasunsrule32), I got the following error:
It may be worth noting that my device was already running Android 4.2, since the CM wiki instructions seem to assume an older version.
Installing TWRP and installing CM through that instead worked. I don't have enough posts to comment on the original CM thread in the Dev forum, but I wanted to report this bug and leave the note so other users might find the fix later. If someone with enough posts would like to cross-post this in the appropriate Dev forum thread (or otherwise make dasunsrule32 aware of the issue), it'd be much appreciated.
Click to expand...
Click to collapse
Im sure that recovery, is only for KitKat Roms, you need a different version of CWM to install JellyBean Roms.. This recovery will install CM10.2
TF700T-CWM6.0.3.1
Ahh, I was probably mistaken then. Still, some better labeling on these utilities would prevent further issues. Other than knowing that "kk" stands for "this only works on KitKat", there's nothing in the initial post in the thread for that version of CWM indicating what's supported and what isn't (there's a mention of "now compatible with KitKat", which sounds like it's still compatible with older things).
Q&A for [RECOVERY][TF300T/ME301T] TWRP 2.8.1.x Touch Recovery!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][TF300T/ME301T] TWRP 2.8.1.x Touch Recovery! . If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Minor glitch in TWRP2810 for TF300
Just now installed Scanno's TWRP-TF300T-2_8_1_0.zip. It seems to work fine, but it failed the zip file signature verification. I flashed it with Scanno's 2800 version. The md5sum was fine, so I just turned off sig verification and went for it. Problem with the signature? Problem with TWRP 2800? Just thought someone might want to know. I wish all my problems were that easy!
help
I have a me301t on 4.2 ne4 unlocked boot loader and rooted. It will not let me flah recovery....... infact my recovery seems to be completly gone. When i boot to it its just a black screen nothing ever happdns. Iv tried every method of flashing trwrp no luck. At a loses now. Any way to restore stock recovery
Q&A for [ROM] Vanir/Commotio TF700
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Vanir/Commotio TF700 . If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
So I tried installing the Commotio ROM on my TF700t since I have been reading good things about it. I'm running F2FS from a previous install of another ROM (I have done a full wipe of EVERYTHING before installing Commotion). Sadly I ran into an issue that I cannot solve...
Upon completion of the installation, (both GAPPs and the ROM are installed without any other errors but a mount error for /staging, which I understood is nothing critical from reading the F2FS for TF700T thread), I proceed to reboot my tablet as usual and I reach a "Encryption Unsuccessful" screen. It's a touch-screen option, with only a BACK button and a "RESET TABLET" button. The screen says my data is unavailable until I perform a factory reset. Neither the RESET TABLET button, nor a Factory Reset from TWRP F2FS recovery work. I have tried some thing from various android forums with no success... Is there anything I can do to restore functionality to my tablet? I would like to keep F2FS, with reverting back to EXT4 being my last resort.
I don't have any development experience so I would prefer if the instructions do not require that I compile things.
I have all the time in the world to fix this issue, as use of my tablet is not absolutely essential at the moment. I'm looking forward to a reply from you guys!
Stay awesome and thanks in advance!
EDIT: I have fixed the issue by flashing a F2FS kernel. From what I understood the ROM comes bundled with a kernel but I guess it's not F2FS compatible maybe? Anyways, ROM is by far the fastest and most responsive I have used on my tablet. Could not get ROM2SD to work sadly.
Also, the reason I am posting here is because I do not have enough forum posts to write in the ROMs development thread.
Huge thanks to Dev for the superb ROM. Kudos!
hello i am rooted with twrp recovery installed. I was able to unroot and download the latest 5.0.2-01001 ota but im not able to install the update it would just take me to twrp recovery and stop there.?? i found the update zip and tried to flash it in twrp but it says it cant mount and failed to flash any help would be appreciated.
OTA updates will require a stock recovery. I'm in the process of getting an Idol 3 but I used to have an Idol 2 and, to return to a completely stock ROM, I had to use the Alcatel Mobile upgrade too which identified my phone, downloaded the correct firmware, and restored the phone. Prior to restoring back to stock, I had cwm and root.
Thanks for the reply I tried the software update but its not working keep saying I have the latest even when I did a full wipe. Using the latest 4.9.2 version...is there a way to make a twrp flashable ota zip from the downloaded update file in the ota cache..
lude86 said:
hello i am rooted with twrp recovery installed. I was able to unroot and download the latest 5.0.2-01001 ota but im not able to install the update it would just take me to twrp recovery and stop there.?? i found the update zip and tried to flash it in twrp but it says it cant mount and failed to flash any help would be appreciated.
Click to expand...
Click to collapse
You cannot be rooted and install a stock update...it's mentioned in several places throughout the forum. Quickest solution is to use the mobile q to restore the whole phone to factory (and in the process it will put the latest version on it). Otherwise you have to fully unroot AND if you have modified any files such as build.prop or other system files it still won't work. You CAN install with TWRP however in the process of the install it will overwrite it with stock recovery. If I had to guess I'd say you did not do the supersu FULL unroot.
famewolf said:
You cannot be rooted and install a stock update...it's mentioned in several places throughout the forum. Quickest solution is to use the mobile q to restore the whole phone to factory (and in the process it will put the latest version on it). Otherwise you have to fully unroot AND if you have modified any files such as build.prop or other system files it still won't work. You CAN install with TWRP however in the process of the install it will overwrite it with stock recovery. If I had to guess I'd say you did not do the supersu FULL unroot.
Click to expand...
Click to collapse
mobile Q is horse manure now. I ran into the same problem, whereby it says you're up to date (which it's not), even if you're running 5.0.2.7SMA-UEA1 ! I only know that one because I inadvertently flashed 5.0.2.7SMA-UEA1 today when I meant to flash 5.0.2.7SRA-UEA2.
Speaking of 5.0.2-01001, 5.0.2.7SRA-UEA2 is on longer the latest yeah... anyway we can update the firmware page? http://forum.xda-developers.com/idol-3/general/want-to-able-to-install-ota-updates-t3163745
I just tried to OTA update to 5.0.2-01001, but OTA of course does not work if TWRP is acting recovery; it just reboots to TWRP and then if you reboot system, nothing happens. Although seemingly never mentioned, we must remove TWRP (even read only TWRP) before updating OTA?
tekka-maki said:
mobile Q is horse manure now. I ran into the same problem, whereby it says you're up to date (which it's not), even if you're running 5.0.2.7SMA-UEA1 ! I only know that one because I inadvertently flashed 5.0.2.7SMA-UEA1 today when I meant to flash 5.0.2.7SRA-UEA2.
Speaking of 5.0.2-01001, 5.0.2.7SRA-UEA2 is on longer the latest yeah... anyway we can update the firmware page? http://forum.xda-developers.com/idol-3/general/want-to-able-to-install-ota-updates-t3163745
I just tried to OTA update to 5.0.2-01001, but OTA of course does not work if TWRP is acting recovery; it just reboots to TWRP and then if you reboot system, nothing happens. Although seemingly never mentioned, we must remove TWRP (even read only TWRP) before updating OTA?
Click to expand...
Click to collapse
The thread is closed. There is also no reason you NEED the most recent posted as you can flash any of them and then do an update. Mobile Q is the recommended method to re-do your phone if you can't manage to make a backup before messing with it. It has apparently worked just fine for people in this forum for every model type mentioned so the burden of proof is on your part if you can't get it to work.
famewolf said:
The thread is closed. There is also no reason you NEED the most recent posted as you can flash any of them and then do an update. Mobile Q is the recommended method to re-do your phone if you can't manage to make a backup before messing with it. It has apparently worked just fine for people in this forum for every model type mentioned so the burden of proof is on your part if you can't get it to work.
Click to expand...
Click to collapse
Why would the thread be 'closed'. OP's problem is unresolved.
'Worked' is the operative term for. Perhaps you haven't used to Mobile Q tool lately? As OP (and I) said (today), running OTA from 6045 now just reboots to TWRP, no install. Alternately, when attempting to update 6045 from Mobile Q, it just throws a funny English 'update no needed' kinduva message (pic). Incidentally, have you been to their website to find an update to this tool? Holy crap, in that respect, Mobile Q must be a virtual breakthrough for these boys! :laugh:
You're so helpful here famewolf. I've both appreciated and have been comforted by seeing your knowledge all over this subforum, since day 1. Please provide help. You tell me where this 'people' person is, and I'll wank on his boner for you. Then we have a definition of 'working fine' in stead of 'worked fine'. ? :angel:
tekka-maki said:
Why would the thread be 'closed'. OP's problem is unresolved.
'Worked' is the operative term for. Perhaps you haven't used to Mobile Q tool lately? As OP (and I) said (today), running OTA from 6045 now just reboots to TWRP, no install. Alternately, when attempting to update 6045 from Mobile Q, it just throws a funny English 'update no needed' kinduva message (pic). Incidentally, have you been to their website to find an update to this tool? Holy crap, in that respect, Mobile Q must be a virtual breakthrough for these boys! :laugh:
You're so helpful here famewolf. I've both appreciated and have been comforted by seeing your knowledge all over this subforum, since day 1. Please provide help. You tell me where this 'people' person is, and I'll wank on his boner for you. Then we have a definition of 'working fine' in stead of 'worked fine'. ? :angel:
Click to expand...
Click to collapse
The thread that is closed is the one YOU mentioned.... not the op. http://forum.xda-developers.com/idol-3/general/want-to-able-to-install-ota-updates-t3163745
I dont use mobile Q as I use Linux and they don't have a linux version. I use 3rd party roms such as AICP with the ARDE non OC rom. TWRP puts a log in /tmp...did you look at what the error message says? OTA updates will NOT apply if you have updated system files such as build.prop. Thats all I can tell you because I can't try what you are using.
famewolf said:
The thread that is closed is the one YOU mentioned.... not the op. http://forum.xda-developers.com/idol-3/general/want-to-able-to-install-ota-updates-t3163745
I dont use mobile Q as I use Linux and they don't have a linux version. I use 3rd party roms such as AICP with the ARDE non OC rom. TWRP puts a log in /tmp...did you look at what the error message says? OTA updates will NOT apply if you have updated system files such as build.prop. Thats all I can tell you because I can't try what you are using.
Click to expand...
Click to collapse
I haven't updated the build.prop, I doubt the OP has either.
'There is no greater software version available to upgrade your phone,actual version of your phone is the latest'
Hehe! Only thing that would make this funnier is if they misspelled 'version'. At least I can derive some amusement from that message and their ****ty, convoluted website.
Shame you can't help on that front, but maybe you can at least guide me on what should be normal flow of this procedure.
When one does OTA update unrooted (but with custom recovery), at the point that the phone reboots, it should not (in theory) boot into TWRP right? I would think just continue with update, and maybe that's why I would need to remove TWRP in favor of stock recovery.
It would be easier to attack it from that angle as opposed to their crappy win32 program. which they probably didn't pay the GoDaddy bill on.:laugh:
I don't even know why I'm bothering as it's just a backup phone now. I just find it ridiculous that I can get their last measly update either from Q or from device (ostensibly so long as custom recovery remains). Holy bejebus, updating Shamu is so painless (6.0.1)
---------- Post added at 08:41 PM ---------- Previous post was at 08:22 PM ----------
likely they have not updated their server side to to UEN0 from UEA2 for their craptacular tool which would explain that problem.
Curious, did you lose Band 12 with UEN0. I haven't heard anything positive from this most recent update that is giving me a headache to get to. Perhaps it's for naught. They don't even have a changelog do they. Meh... I'm going to forget about it until something notable comes along or maybe even just sell this thing while I might still get over a hundred.
tekka-maki said:
I haven't updated the build.prop, I doubt the OP has either.
'There is no greater software version available to upgrade your phone,actual version of your phone is the latest'
Hehe! Only thing that would make this funnier is if they misspelled 'version'. At least I can derive some amusement from that message and their ****ty, convoluted website.
Shame you can't help on that front, but maybe you can at least guide me on what should be normal flow of this procedure.
When one does OTA update unrooted (but with custom recovery), at the point that the phone reboots, it should not (in theory) boot into TWRP right? I would think just continue with update, and maybe that's why I would need to remove TWRP in favor of stock recovery.
It would be easier to attack it from that angle as opposed to their crappy win32 program. which they probably didn't pay the GoDaddy bill on.:laugh:
I don't even know why I'm bothering as it's just a backup phone now. I just find it ridiculous that I can get their last measly update either from Q or from device (ostensibly so long as custom recovery remains). Holy bejebus, updating Shamu is so painless (6.0.1)
---------- Post added at 08:41 PM ---------- Previous post was at 08:22 PM ----------
likely they have not updated their server side to to UEN0 from UEA2 for their craptacular tool which would explain that problem.
Curious, did you lose Band 12 with UEN0. I haven't heard anything positive from this most recent update that is giving me a headache to get to. Perhaps it's for naught. They don't even have a changelog do they. Meh... I'm going to forget about it until something notable comes along or maybe even just sell this thing while I might still get over a hundred.
Click to expand...
Click to collapse
As I mentioned here: http://forum.xda-developers.com/showpost.php?p=64967202&postcount=4 you CAN install an OTA update with twrp...it will install it just fine however at the completion of the update you will no longer HAVE twrp installed because it will have been overwritten with stock recovery. (it does that at the END) This will be apparent the NEXT time you try to load recovery. Where do you imagine the update is processed? It's processed by the recovery app...it can't be done inside the rom because files would be in use. The last version I ever ran was UER0..was not even aware UEN0 was out. As I indicated, I switched to a rom based on cyanogenmod with some features I wanted...if I was going to switch NOW I'd choose blisspop and it's the one I intend to install the next time I have to do a reinstall. I don't see why you fight on 5.02 when 5.1.1 is available in various flavors and with the ARDE NON OC Kernel is rock steady. If you made full backups of your device (ie dd images of ALL partitions using the Backupall bat file or shell script running around the forum restoring to a previous radio is as simple as reflashing the partition using fastboot commands.
The radio is stored in the "modem" partition fyi.
famewolf said:
As I mentioned here: http://forum.xda-developers.com/showpost.php?p=64967202&postcount=4 you CAN install an OTA update with twrp...it will install it just fine however at the completion of the update you will no longer HAVE twrp installed because it will have been overwritten with stock recovery. (it does that at the END) This will be apparent the NEXT time you try to load recovery. Where do you imagine the update is processed? It's processed by the recovery app...it can't be done inside the rom because files would be in use. The last version I ever ran was UER0..was not even aware UEN0 was out. As I indicated, I switched to a rom based on cyanogenmod with some features I wanted...if I was going to switch NOW I'd choose blisspop and it's the one I intend to install the next time I have to do a reinstall. I don't see why you fight on 5.02 when 5.1.1 is available in various flavors and with the ARDE NON OC Kernel is rock steady. If you made full backups of your device (ie dd images of ALL partitions using the Backupall bat file or shell script running around the forum restoring to a previous radio is as simple as reflashing the partition using fastboot commands.
The radio is stored in the "modem" partition fyi.
Click to expand...
Click to collapse
So where is the latest update to flash with twrp (good dry run for me should a decent upgrade come out that isn't UEN0)? I just went with UER0 posted on yer thread thr with all the megaupload firmwares & flash restored system & boot (after full wipe); as an aside, it took, & I still have TWRP in tact. I'm well aware of your fastboot method & orig backup of ALL partitions. Seemed like a waste of space at the time, still kinda does.
Regarding your rhetorical question, I was referencing Alcatel's w32 Q tool. It seemingly wasn't updated to be keyed in on the latest update either. No wait, it said the same 'no greater version' crap even when I restored the original 6045i US system/boot fw from twrp, lmao
tekka-maki said:
So where is the latest update to flash with twrp (good dry run for me should a decent upgrade come out that isn't UEN0)? I just went with UER0 posted on yer thread thr with all the megaupload firmwares & flash restored system & boot (after full wipe); as an aside, it took, & I still have TWRP in tact. I'm well aware of your fastboot method & orig backup of ALL partitions. Seemed like a waste of space at the time, still kinda does.
Regarding your rhetorical question, I was referencing Alcatel's w32 Q tool. It seemingly wasn't updated to be keyed in on the latest update either. No wait, it said the same 'no greater version' crap even when I restored the original 6045i US system/boot fw from twrp, lmao
Click to expand...
Click to collapse
Why are you assuming I should know where the latest and greatest update for stock should be? Updates are customized based on the rom version you are running at the time you submit a request. I've already stated I'm using a 3rd party rom and using an OS that doesn't allow me to run their software. You consider my recommendations a waste of time so I'll quit making them and continue using my perfectly working device on 5.1.1.
famewolf said:
Why are you assuming I should know where the latest and greatest update for stock should be? Updates are customized based on the rom version you are running at the time you submit a request. I've already stated I'm using a 3rd party rom and using an OS that doesn't allow me to run their software. You consider my recommendations a waste of time so I'll quit making them and continue using my perfectly working device on 5.1.1.
Click to expand...
Click to collapse
Omfg buddy, you said, '... you CAN install an OTA update with twrp' ; all I did was point out that I flashed previous updates (presumably the same way you're talking about), TWRP remained in tact afterward, & asked you to follow through with that point with, you know, the actual update in question here that defies many of your assertions. One of your recommendations is broken (Q), the other is hindsight (full backup) & last (update via TWRP) seemingly not feasible (unless someone were to submit updated /system) . Anyway it's all a moot point now since we're just measuring our junk.
I'm tickled you're running 5.1.1, as you've said repeatedly... I tried it briefly on Shamu & was happy to leave the LP quagmire all together & get to 6.0.1. Sufficed to say, there isn't anything perfect about this device or 5.1.1, which is why I'll leave as is & sell it. :good:
Thanks anyway.
I've been fortunate that I rarely hit a problem that I can't resolve but this one has me stumped. I'm running Android 4.4.2 Build Number K0T4H.I535VRUDNE1 under Safestrap 4.0. I created a new ROM slot and flashed a new ROM. When I booted it went into a boot loop (gets the splash screen, screen goes blank for a bit, then restarts). I've tried several different ROMs (Octo, Lineage, Superlite, Carbon) all do the same thing. Although this is a brand new ROM slot I tried the normal wipe/factory reset processes anyway - all to no avail. Found some posts with reference to permissions problems so ran Fix Permissions under TWRP but still no luck. Then I backed up the primary ROM slot and restored it to the new slot and the new copy booted just fine. I tried to update the new ROM slot with the new ROM - wipe/factory reset/flash - and was back to the boot loop.
This one has me stumped. Safestrap seems to be working fine since I can boot from the new slot with the copy of my current system installed there. I'm reluctant to try flashing the new ROM to the primary slot because I have a good working system there and would hate to mess that up, even though I know I have a good, working backup. That's the whole point of using Safestrap.
I'd appreciate any insights, thoughts, great inspirations that anyone might have.
RESOLVED thanks to suggestion by IBUPROPHEN. See below.
nvrpayretail said:
I've been fortunate that I rarely hit a problem that I can't resolve but this one has me stumped. I'm running Android 4.4.2 Build Number K0T4H.I535VRUDNE1 under Safestrap 4.0...
Click to expand...
Click to collapse
I don't use SafeStrap but, since this seems to be an issue regarding SafeStrap, your best bet is to post this question within the following SafeStrap thread for your device.
https://forum.xda-developers.com/showthread.php?t=2797314
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Ibuprophen said:
I don't use SafeStrap but, since this seems to be an issue regarding SafeStrap, your best bet is to post this question within the following SafeStrap thread for your device.
https://forum.xda-developers.com/showthread.php?t=2797314
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Thanks for the suggestion. I've installed multiple levels of Android under Safestrap before (quite awhile ago), but perhaps the ROMs I've tried this time are at too high a level. I thought of trying 5.0 or 6.0 ROMs but silly me didn't think Safestrap would have a problem with the current ROMs. I'll take a look at that thread, see if there is anything relevant already there and perhaps see if I can find a 5.0/6.0 ROM to test.
Thanks again...
Update: Looks like your suggestion hit the nail on the head. I can only use locked bootloader ROMs. There seems to be a Superliterom ROM available with some updated modules available. I'll give that a go. Many, many thanks for pointing me in the right direction.................