Q&A for [RECOVERY][TF300T/ME301T] TWRP 2.8.1.x Touch Recovery!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][TF300T/ME301T] TWRP 2.8.1.x Touch Recovery! . If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Minor glitch in TWRP2810 for TF300
Just now installed Scanno's TWRP-TF300T-2_8_1_0.zip. It seems to work fine, but it failed the zip file signature verification. I flashed it with Scanno's 2800 version. The md5sum was fine, so I just turned off sig verification and went for it. Problem with the signature? Problem with TWRP 2800? Just thought someone might want to know. I wish all my problems were that easy!
help
I have a me301t on 4.2 ne4 unlocked boot loader and rooted. It will not let me flah recovery....... infact my recovery seems to be completly gone. When i boot to it its just a black screen nothing ever happdns. Iv tried every method of flashing trwrp no luck. At a loses now. Any way to restore stock recovery
Related
Q&A for [ROM] Vanir/Commotio TF700
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Vanir/Commotio TF700 . If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
So I tried installing the Commotio ROM on my TF700t since I have been reading good things about it. I'm running F2FS from a previous install of another ROM (I have done a full wipe of EVERYTHING before installing Commotion). Sadly I ran into an issue that I cannot solve...
Upon completion of the installation, (both GAPPs and the ROM are installed without any other errors but a mount error for /staging, which I understood is nothing critical from reading the F2FS for TF700T thread), I proceed to reboot my tablet as usual and I reach a "Encryption Unsuccessful" screen. It's a touch-screen option, with only a BACK button and a "RESET TABLET" button. The screen says my data is unavailable until I perform a factory reset. Neither the RESET TABLET button, nor a Factory Reset from TWRP F2FS recovery work. I have tried some thing from various android forums with no success... Is there anything I can do to restore functionality to my tablet? I would like to keep F2FS, with reverting back to EXT4 being my last resort.
I don't have any development experience so I would prefer if the instructions do not require that I compile things.
I have all the time in the world to fix this issue, as use of my tablet is not absolutely essential at the moment. I'm looking forward to a reply from you guys!
Stay awesome and thanks in advance!
EDIT: I have fixed the issue by flashing a F2FS kernel. From what I understood the ROM comes bundled with a kernel but I guess it's not F2FS compatible maybe? Anyways, ROM is by far the fastest and most responsive I have used on my tablet. Could not get ROM2SD to work sadly.
Also, the reason I am posting here is because I do not have enough forum posts to write in the ROMs development thread.
Huge thanks to Dev for the superb ROM. Kudos!
[Q&A] [XOOM2][RECOVERY/BOOTSTRAP] XOOM2/XYB Safestrap v3.1 [01/06 v3.12 - Stock Flas
Q&A for [XOOM2][RECOVERY/BOOTSTRAP] XOOM2/XYB Safestrap v3.1 [01/06 v3.12 - Stock Flash+]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [XOOM2][RECOVERY/BOOTSTRAP] XOOM2/XYB Safestrap v3.1 [01/06 v3.12 - Stock Flash+]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Better late than never
Only just decided to root my Xoom 2. the link to the droidrazr download is dead. is there another?
Xoom2 ME MZ608
I have a Xoom2 ME MZ608 Europe version. I have Rooted and installed Safetrap on this device.
Recently I have started facing some troubles with the Internet connectivity and problems with some websites access. So, I tried doing factory resets couple of times but it didn't solve the problem. So, I have taken a backup of the existing ROM using the safe track backup option and tried to flash the stock fastboot files of Brazil ROM(1.6.0M-272.12_MZ608_p2HW_BlurRegion02_CFC1FF_fastboot_signed_latam.xml.zip). This seems to be the biggest mistake i have done. While flashing the fastboot, the system.img flashing failed and all the remaining succeeded. This could be due to the fact that i was running on a higher android version than this.
Now the Tablet is not booting, but i am able to boot into safetrap. I tried to erase the stock and tried to restore the backup i had. This is also not working anymore. It seems to bricked and showing a blank screen without any error or message after it passes through Safetrap.
I have done this fastboot sometime back with an image from droiddevelopers.com site which worked perfectly. Now that the ROMs are taken out from the site. I am not able to get the right ROM for my device now. Are there any stock ROM backups available which can be falshed directly from Safetrap for this device? (or) Does anyone have the Europe Retail version of the Stock fastboot file for MZ608?
It would be very helpful if I can get either a backup ROM (or) Stock fastboot for MZ608. Currently my Xoom2 ME is almost in a bricked state.
Thanks
Chandra
Found a Solution
I have found a solution for this here:
http://forum.xda-developers.com/showpost.php?p=47950732&postcount=779
This procedure worked flawlessly for me.
The issue with Wifi still exists. I really can't figure out what could be the issue. Wifi connects but Internet only works intermittently.
Thanks
Chandra
Hello,
Does anyone have Safestrap 3.12 made by Hashcode?
Thank you!
Sent from my XOOM 2 using XDA Free mobile app
Q&A for [Recovery][JB/KK]ClockWorkMod Recovery[6.0.4.7]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Recovery][JB/KK]ClockWorkMod Recovery[6.0.4.7]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Problem
Hi guys, that's my first post on this forum.
I got a CWM on my tablet yet. If i want to update it with a new version, how can i do?
Sorry for my bad english.
Boot loop into recovery mode
Hello
I have TF300T with JellyBean and last night I decide to migrate to CM 12 or to try to migrate....
Before reading this post, I unlock my tablet and install a recovery-jb.img : CWM-based Recovery v6.0.2.3. -> installation OK
I reboot in recovery before booting on Android and it's seems to be my error because now I have use "adb reboot-bootlader" and choose Android to boot on the original JellyBean.
It's only today I see your post with this sentence : "Make sure reboot into android after flashing bdefore going back to recovery"...
So what can I do to solve this mistake ?
I have also other error messages like this :
"E:Can't mount /cache/recovery/command"
".... /recovery/log"
"E:Can't open /cache/recovery/log"
"E:Can't mount/cache/recovery/fast_log"
"E:Can't open /cache/recovery/fast_log"
Thank you per advance for your help.
Jage
Q&A for [GUIDE] Get Stock Recovery/Install OTA Updates without losing data.
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE] Get Stock Recovery/Install OTA Updates without losing data.. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Extract Stock recovery from OTA
Hi,
I'm trying to go back to stock recovery on my HTC M7C DUG.
unfortunately i cannot find a recovery image.
(the one found on http://forum.xda-developers.com/showthread.php?t=2617159 does not work for me)
i've read the the recovery image can be extracted from the OTA update file,
but i am not able to open the firmware.zip in the OTA.
i tried downloading several times but every time it show an error
"the compressed ZIP folder is invalid"
Any idea what could be the problem ??
Q&A for [GUIDE] Back to Stock ROM (the sure method)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE] Back to Stock ROM (the sure method). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hi
Yes, and for me to give '.
Hi ferhub
I've exactly the same situation, I've also softbricked my Honor 6 L12. Nothing really works.
I've tried to unbrick with multitool, but the phone keeps on rebooting.
From what I can see, is that recovery images are working as long as they are EMUI 3.1 compatible, but the one's included in the current official stock roms are not.
So I can fastboot and go into recovery with EMUI 3.1 recovery image or the latest TWRP 2.8.7.
I tried to find the full rom (not the update.zip) of 5.1.1 with emui 3.1 but I was unsuccesful. I think this could solve our problem.
Pfff, I've bricked my phone on friday night and have been researching everything the whole weekend. Next time I won't be so ignorant for the clear message that you brick your phone with multitool when you are on 3.1
Any help appreciated!
Can I get back to the stock ROM with my backup via cwm?