Hi everyone, i get the official update for my moto g xt1033 asia retail, i updated from kk to lollipop, after that i tried to flash a custom recovery and the phone get crazy, restarting continously. I made a factory reset and i was able to start the phone, now it works, but it have many problems, the sim2 is not conected to internet...the ideea is i want to reflash this update. How can i do that? factory reset and wipe cache doesnt help me. How can i reflash with the same version of L 5.0.2 OTA. I have root and stock recovery. Thanks
Revert to stock 4.4.4
And then flash the 5.0.2 update zip through recovery.
how? i think i have 5.0 bootloader and i understand is too risky to downgrade to stock 4.4.4, if i know how, maybe i will, thanks
Related
I have a rooted, Boost Moto G flashed to VZ, running 4.4.2 and would like to upgrade to 4.4.4. I also have TWRP, installed.
Rather than flashing the complete 4.4.4 factory image which, I believe will wipe all my data, I would like to update from the OTA file.
Can this be done with TWRP or must I use fastboot? Will the apps and data be at risk?
Here's the scenario:
I converted Moto G XT1033 4.4.4 to GPE 4.4.2
Then upgraded to GPE 4.4.4 and GPE 5.0.1, both by OTA
GPE 5.0.1 OTA ended up in softbrick
So now I cannot repeat the process beacause of the new bootloader, GPE 5.0.1 OTA brought with itself. And that bootloader would cause a hardbrick if I tried GPE 4.4.4 OTA on the device now
Questions: (No question is related to the other)
Would I be able to install Stock Lollipop OTA when I get one on 'Stock rom'? (I can revert to Stock 4.4.4) Would Stock Lollipop OTA mess up with the current bootloader, GPE Lollipop OTA has installed?
Is there any way I could flash Lollipop Stock image later, when it's available?
What can I do to set things right with the 'bootloader messup' that's caused right now?
Thanks, in advance!
emarld2011 said:
Here's the scenario:
I converted Moto G XT1033 4.4.4 to GPE 4.4.2
Then upgraded to GPE 4.4.4 and GPE 5.0.1, both by OTA
GPE 5.0.1 OTA ended up in softbrick
So now I cannot repeat the process beacause of the new bootloader, GPE 5.0.1 OTA brought with itself. And that bootloader would cause a hardbrick if I tried GPE 4.4.4 OTA on the device now
Questions: (No question is related to the other)
Would I be able to install Stock Lollipop OTA when I get one on 'Stock rom'? (I can revert to Stock 4.4.4) Would Stock Lollipop OTA mess up with the current bootloader, GPE Lollipop OTA has installed?
Is there any way I could flash Lollipop Stock image later, when it's available?
What can I do to set things right with the 'bootloader messup' that's caused right now?
Thanks, in advance!
Click to expand...
Click to collapse
You are another who has made a stupid mistake, you should HAVE READ MY THREAD!
You need to wait untill the Lollipop Factory images are published, then we can get a blankflasher and restore your bootloader.
Once your bootloader is working again, you can flash Lollipop without problems.
You need to wait 1 or 2 months.
GI0\/\NNI said:
You are another who has made a stupid mistake, you should HAVE READ MY THREAD!
You need to wait untill the Lollipop Factory images are published, then we can get a blankflasher and restore your bootloader.
Once your bootloader is working again, you can flash Lollipop without problems.
You need to wait 1 or 2 months.
Click to expand...
Click to collapse
Nope. I did read your thread after softbrick. And that's why I didn't install any OTA's after v5's.
I flashed 4.4.4. It's not an OTA!
I'm currently running 4.4.4 on 5.x bootloader.
Now what I'm asking is,
Would I be able to install 5.x OTA when I get it?
Before the factory image and all that thing.
PS: 5.x hasn't arrived for general public in INDIA yet. What I was trying was Brazil OTA.
Hi, i have a xt1033 asian retail, i converted it to brasilian 4.4.4 and then i flashed soak 5.0 brasilian, how can i go back to stock 4.4.4, and wait normally for the OTA? My bootloader is unlocked, can i flash any 5.0 rom when i install a custom recovery and root? The thing i would like to know, am i stucked now on this brasilian 5.0 soak or not? Because i would like to change the rom in the future.
If i wait for factory stock image 5.0.2 will i be able just to flash it via fastboot, and have then again a full stock rom? I am confused :/
anybody?
I recently soft bricked my phone (Moto G 2013 falcon) downgrading it from Cyanogen 12 to stock 4.4.4 (Argentina), so after many tries I ended up booting in stock 4.4.4 Europe retail (210.12.40.falcon_umts.EURetail.en.EU).
I try to upgrade that to 5.0, but the OTA update fails in the middle of the installation. Then I tried to download the OTA file manually and install it via stock recovery, but it fails too.
Is there any other way? Or do I have to convert it to 4.4.4 stock Brazilian or some other variation with more OTA files available?
Thanks in advance,
Are you unrooted, running stock recovery, and stock ROM?
Yes: unrooted, stock recovery, stock ROM. My bootloader is unlocked though, so I can easily root the phone or change the recovery.
I already tried with a (supposed) official 5.0 OTA for Europe using stock recovery, but it didn't work ("update failed" or so).
I have the Telus xt1032 8GB. Not sure if it runs or you need the same Telus firmware but I was able to flash back to stock 4.4.4, update Motorola apps, and take the OTA update via wifi. I did this three times on my xt1032 in the past 2 weeks without any problems.
Hello forum, basically, when I got my moto G, it was on 4.3, so I did all the bits, and the step i did after all the rooting unlocking etc was upgraded my bootloader to the lollipop one (ending in 8 i believe) - which i wish i didnt do, and cant downgrade to 4.4.4 (or can I without bricking)......right back to the story.......the problem now is, whenever i try uninstalling apps, or wiping data in any app etc, my phone does a reboot, I installed the brazillian 5.0.2 flashable rom (the optimised one) which worked perfectly, did all the correct wipes etc, but it reboots when uninstalling apps......, and thought i would try dirty unicorns....works well except the rebooting problem...... help....what can I do????????
I read somewhere that maybe to solve it, you gotta change runtime from dalvik to ART, but there is no option to change this....
There are no 5.0.2 uk images available that i have read (so i cant completely get back to complete factory settings)
I really wished i kept the KK bootloader!!!! so who can help me????? I want to try some of the great CM11 builds!!!
Since your bootloader is unlocked and you have the lollipop bootloader, I suggest flashing the stock 4.4.4 (not 4.4.2) ROM for your xt1032 (you will not be able to flash the motoboot file so don't bother trying), upgrade the Motorola apps via Play store, and take the 5.02 OTA update.
FInd your stock ROM here: http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=filename&order=ASC&show=100&page=1
audit13 said:
Since your bootloader is unlocked and you have the lollipop bootloader, I suggest flashing the stock 4.4.4 (not 4.4.2) ROM for your xt1032 (you will not be able to flash the motoboot file so don't bother trying), upgrade the Motorola apps via Play store, and take the 5.02 OTA update.
FInd your stock ROM here: http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=filename&order=ASC&show=100&page=1
Click to expand...
Click to collapse
do i have to update to 5.0.2 again? as i want to try cm11 again
@audit13 is this a flashable zip, or do you need to do it via fastboot? as its got a bootloader included in the zip (4.4.4 kitkat bootloader)
The files from filefactory need to be unzipped and flashed via fastboot or mfastboot.
You do not need to do anything with the stock ROM if you want to install a custom ROM. All you need to do is install a compatible custom recovery and a custom ROM. I suggest flashing right to the latest CM12 rather than using CM11.
I suggested flashing back to the stock for your phone and upgrading to 5.02 via OTA to see if the uninstall problem goes away.
yep understood @audit13 read your other posts on this matter too, the reason I want to use a cm11 rom, is I had a moto g about 8-9 months ago, and there was a rom i loved, and it was cm11 based......will i brick if i do flash this cm11 rom? i know about flickering bug, and possible hard brick if i went back to versions below 4.4.4 ...... and i love cyanogenmod roms, as i dont get irritating moto updates etc
Flashing CM11 should not be a problem as CM11 ROMs do not touch the bootloader or modem.
so basically, downgrade to the 4.4.4 firmware file, and cm11 and im done? yeah?
You can try to flash cm11 directly over stock 5.02. If it doesn't work, you may have to flash back to stock 4.4.4, install recovery, and then flash cm11.