Hi, i have a xt1033 asian retail, i converted it to brasilian 4.4.4 and then i flashed soak 5.0 brasilian, how can i go back to stock 4.4.4, and wait normally for the OTA? My bootloader is unlocked, can i flash any 5.0 rom when i install a custom recovery and root? The thing i would like to know, am i stucked now on this brasilian 5.0 soak or not? Because i would like to change the rom in the future.
If i wait for factory stock image 5.0.2 will i be able just to flash it via fastboot, and have then again a full stock rom? I am confused :/
anybody?
Related
Here's the scenario:
I converted Moto G XT1033 4.4.4 to GPE 4.4.2
Then upgraded to GPE 4.4.4 and GPE 5.0.1, both by OTA
GPE 5.0.1 OTA ended up in softbrick
So now I cannot repeat the process beacause of the new bootloader, GPE 5.0.1 OTA brought with itself. And that bootloader would cause a hardbrick if I tried GPE 4.4.4 OTA on the device now
Questions: (No question is related to the other)
Would I be able to install Stock Lollipop OTA when I get one on 'Stock rom'? (I can revert to Stock 4.4.4) Would Stock Lollipop OTA mess up with the current bootloader, GPE Lollipop OTA has installed?
Is there any way I could flash Lollipop Stock image later, when it's available?
What can I do to set things right with the 'bootloader messup' that's caused right now?
Thanks, in advance!
emarld2011 said:
Here's the scenario:
I converted Moto G XT1033 4.4.4 to GPE 4.4.2
Then upgraded to GPE 4.4.4 and GPE 5.0.1, both by OTA
GPE 5.0.1 OTA ended up in softbrick
So now I cannot repeat the process beacause of the new bootloader, GPE 5.0.1 OTA brought with itself. And that bootloader would cause a hardbrick if I tried GPE 4.4.4 OTA on the device now
Questions: (No question is related to the other)
Would I be able to install Stock Lollipop OTA when I get one on 'Stock rom'? (I can revert to Stock 4.4.4) Would Stock Lollipop OTA mess up with the current bootloader, GPE Lollipop OTA has installed?
Is there any way I could flash Lollipop Stock image later, when it's available?
What can I do to set things right with the 'bootloader messup' that's caused right now?
Thanks, in advance!
Click to expand...
Click to collapse
You are another who has made a stupid mistake, you should HAVE READ MY THREAD!
You need to wait untill the Lollipop Factory images are published, then we can get a blankflasher and restore your bootloader.
Once your bootloader is working again, you can flash Lollipop without problems.
You need to wait 1 or 2 months.
GI0\/\NNI said:
You are another who has made a stupid mistake, you should HAVE READ MY THREAD!
You need to wait untill the Lollipop Factory images are published, then we can get a blankflasher and restore your bootloader.
Once your bootloader is working again, you can flash Lollipop without problems.
You need to wait 1 or 2 months.
Click to expand...
Click to collapse
Nope. I did read your thread after softbrick. And that's why I didn't install any OTA's after v5's.
I flashed 4.4.4. It's not an OTA!
I'm currently running 4.4.4 on 5.x bootloader.
Now what I'm asking is,
Would I be able to install 5.x OTA when I get it?
Before the factory image and all that thing.
PS: 5.x hasn't arrived for general public in INDIA yet. What I was trying was Brazil OTA.
Hi everyone, i get the official update for my moto g xt1033 asia retail, i updated from kk to lollipop, after that i tried to flash a custom recovery and the phone get crazy, restarting continously. I made a factory reset and i was able to start the phone, now it works, but it have many problems, the sim2 is not conected to internet...the ideea is i want to reflash this update. How can i do that? factory reset and wipe cache doesnt help me. How can i reflash with the same version of L 5.0.2 OTA. I have root and stock recovery. Thanks
Revert to stock 4.4.4
And then flash the 5.0.2 update zip through recovery.
how? i think i have 5.0 bootloader and i understand is too risky to downgrade to stock 4.4.4, if i know how, maybe i will, thanks
Hi,
I have two Moto G 2013 XT1033 Dual Sim and for both of them - i dont care about losing data and reinstalling - I want to get to a 100% STOCK 5.0.2 state. Dont need root or customer boot.
No 1) Upgraded from 5.0.1 Soak Test Brazil - 220.21.25.falcon_umtsds.Brasil.en.BR, no root, stock bootloader > to 5.0.2 using the incremental ZIP that was provided in some of the recent posts here.
Will I be getting automatic OTAs from now on? Is this equivalent to stock flashing 4.4.4. an then OTAing up to 5.0.2?
No 2) Optimized non-stock firmware 4.4.4, with bloatware reduced etc. dont remember who made the ROM - also Retail, but bootloader unlocked and have root
What is the best approach to this one to a stock 5.0.2, no-root, locked bootloader, is there just a single binary stock 5.0.2 file that I can flash?
Should I downgrade both to 4.4.4 Stock and then upgrade via OTA?
I know for (1) there exists an incremental update, how safe is this?
For (2) the OTA arrived, but as its an optimized ROM the update does not work.
I know all the information is somewhere here, I just was confused what path is safe and if its not possible to simply flash some binary recovery (ideally already to 5.0.2)
I think you should back to 4.4.4 than upgrade to 5.0.2
For back to stock 4.4.4 you can use this
http://forum.xda-developers.com/showthread.php?t=2854688
upgrade to 5.0.2 try this http://forum.xda-developers.com/showthread.php?t=3004757
Sent from my XT1033 using Tapatalk
khensin said:
http://forum.xda-developers.com/showthread.php?t=2854688
Click to expand...
Click to collapse
One of my malware protection tools rejected the untouched brazil 4.4.4 download. Where do I find the original files and confirmed hashes?
I recently soft bricked my phone (Moto G 2013 falcon) downgrading it from Cyanogen 12 to stock 4.4.4 (Argentina), so after many tries I ended up booting in stock 4.4.4 Europe retail (210.12.40.falcon_umts.EURetail.en.EU).
I try to upgrade that to 5.0, but the OTA update fails in the middle of the installation. Then I tried to download the OTA file manually and install it via stock recovery, but it fails too.
Is there any other way? Or do I have to convert it to 4.4.4 stock Brazilian or some other variation with more OTA files available?
Thanks in advance,
Are you unrooted, running stock recovery, and stock ROM?
Yes: unrooted, stock recovery, stock ROM. My bootloader is unlocked though, so I can easily root the phone or change the recovery.
I already tried with a (supposed) official 5.0 OTA for Europe using stock recovery, but it didn't work ("update failed" or so).
I have the Telus xt1032 8GB. Not sure if it runs or you need the same Telus firmware but I was able to flash back to stock 4.4.4, update Motorola apps, and take the OTA update via wifi. I did this three times on my xt1032 in the past 2 weeks without any problems.
After many soft bricks I ended up in stock 4.4.4 US retail. Although I did upgrade Motorola Update, it says there's no new system software (5.0).
How do I upgrade from 4.4.4 US retail (stock) to 5.0? Is there an OTA file for US? I already searched everywhere, but can't seem to find it.
I could also go to 4.4.4 stock Brasil or Argentina and then apply the OTA, but right now my phone only boots if I install a firmware via recovery (ZIP file), not flashing it with fastboot. And I couldn't find installable ZIP files for 4.4.4 stock Brasil or Argentina.
I'm not sure if you could get the ota update officially (as in the new software available thing).
You could try out the 5.0.2 version from some other reason or you could check out some custom ROM.
Sent from my Moto G using XDA Free mobile app
If your phone works on 4.4.4 Retail, it will probably work with Telus 4.4.4. I had GPE 4.4 on my xt1032 8 GB, flashed back to retail 4.4.4, then flashed to Telus 4.4.4, updated Moto apps, got the Telus OTA update to 5.02.
So where can I get this Telus 4.4.4 firmware? Is it flashable from recovery (ZIP)? Remember fastboot flashes don't work since the first time I softbricked my phone.
santiagoroza said:
So where can I get this Telus 4.4.4 firmware? Is it flashable from recovery (ZIP)? Remember fastboot flashes don't work since the first time I softbricked my phone.
Click to expand...
Click to collapse
When you boot your phone into fastboot and you type "fasboot devices", it doesn't return you phone's serial number?
I don't think there is a Lollipop OTA for USA retail yet.
santiagoroza said:
After many soft bricks I ended up in stock 4.4.4 US retail. Although I did upgrade Motorola Update, it says there's no new system software (5.0).
How do I upgrade from 4.4.4 US retail (stock) to 5.0? Is there an OTA file for US? I already searched everywhere, but can't seem to find it.
I could also go to 4.4.4 stock Brasil or Argentina and then apply the OTA, but right now my phone only boots if I install a firmware via recovery (ZIP file), not flashing it with fastboot. And I couldn't find installable ZIP files for 4.4.4 stock Brasil or Argentina.
Click to expand...
Click to collapse
Android 5.0 USA Retail is not officially released. I would suggest audit13's method.
audit13 said:
When you boot your phone into fastboot and you type "fasboot devices", it doesn't return you phone's serial number?.
Click to expand...
Click to collapse
Fastboot does work. It flashes the firmware with no errors, but the phone won't boot afterwards. I don't know why, but it happens since I first softbricked my phone.
I used to have Retail USA 4.4.4 on my Telus xt1032.
If you really want 5.02, you could try flashing the stock Telus 4.4.4, update motorola apps, and install the 5.02 OTA update.