I am quite new to flashing ROMs and I was really excited when i managed to successfully flash a ROM on my Tipo, it was the AOKP milestone1 ROM and it was pretty good but every 10 seconds an error came up saying "Android Keyboard has stopped working". So today i decided to install the Alienware KitKat ROM it was going well, i transferred the zip file to my SD card, managed to boot into recovery, delete phone date, cache etc and install it. However when i tried to reboot the phone after installing it the pink notification light and the capacitive buttons would light up for 5 seconds and then turn off, but i can still go into CWM recovery mode. So I tried to flash the stock ROM back onto my phone through Flashtool but even that didn't work for me, it kept on getting stuck.
Does anyone have a solution for me. I'm quite saddened by this my phone right now is useless.
Disregard...
Related
Hi,
I will prefix this (as there are a few people around with this problem who can get into recovery mode) with the fact that holding down Vol- on boot is not getting me to the recovery / bootloader screen.
I have a rooted HTC Desire S (rooted it nearly a year ago, so info about the hboot etc is a distant memory).
Anyhoo, I decided to have a play about with one of the ICS roms but it was a bit buggy and the camera drivers still aren't working for video so I decided to go back to Endymion V3.4 - http://forum.xda-developers.com/showthread.php?t=1310845
I did a full wipe, installed base rom, installed optional addons and then upgraded to 3.4 - booted fine into the OS so set about getting my system set up the way I like it.
I noticed that endy came with a theme installer so clicked on one of them to have a look, it asked for root, said it was installed and would need to reboot to take effect...
SO
the problem is, it now won't boot and is stuck on the white HTC boot screen.
Holding vol+/- and power buttons reset it but it just ends up back hanging on the boot screen.
Have tried pulling battery and trying again.
Holding Volume Down when powering up is no longer doing anything
So, I either need a saviour to point me in the direction of a fix.. or a kindly sould to break it to me gently when they tell me my phone has gone to the USB Dock in the sky..
Any help will be greatly appreciated.
Thanks
update:
After pulling battery again, pulling out sim and sd cards, booting with vol- held down, i got into recovery. Am going to try and flash a different rom after doing a full wipe, I'll update once it's done but any insights in the meanwhile will still be appreciated
Sorted, cleared the thing out, stuck reaper CM rom on it, rebooted and everything is peachy for now.
Thanks me
Curious if anyone knows why this might have happened?
because you didnt flash the addon zip which was released alongside endymon and then tried to use the addons,it does say on the screen do not use these unless you have installed the addons
Hello There!
Being anything but an expert I carefully read instructions on how to unlock my SONY XPERIA S (LT26i) as I wanted to install CM9. This worked, but installing cm9 I f...ed up.... All seemed to go well, but after the final boot nothing happened, the screen stayed black.
When I try to unzip the file with cm9 from root again I get: 'installation aborted', '(status 7)' and the anouncement that the zip.file has an error in it.
If I try to start in normal mode (after a hard reset) i get freexperia logo for a short while, then the small led turns purple (i think) and the bottom, bar lights up for a sec or two. Then everything turns black again...
The led turns red all right when i try fastboot mode, but my computer no longer recognizes the phone.
Help me please!
Hey,
flash a new firmware with fastboot (up volume key + start button) at boot
VincentKnife said:
Hello There!
Being anything but an expert I carefully read instructions on how to unlock my SONY XPERIA S (LT26i) as I wanted to install CM9. This worked, but installing cm9 I f...ed up.... All seemed to go well, but after the final boot nothing happened, the screen stayed black.
When I try to unzip the file with cm9 from root again I get: 'installation aborted', '(status 7)' and the anouncement that the zip.file has an error in it.
If I try to start in normal mode (after a hard reset) i get freexperia logo for a short while, then the small led turns purple (i think) and the bottom, bar lights up for a sec or two. Then everything turns black again...
The led turns red all right when i try fastboot mode, but my computer no longer recognizes the phone.
Help me please!
Click to expand...
Click to collapse
Hello!
I have an identical problem. Is there a working version of [FXP117_update-cm-9.0.0-RC0-nozomi-UNOFFICIAL-signed.zip]? There appears to be no access to the phone's SD storage, so how do i flash it?
Have you tried wiping/flashing new firmware from windows, using for example Fastboot Commander? Maybe this will work
I had similar promlem with CM9 on my xperia pro. I solved it with total reinstall of phone. so I wiped cache, Dalvik cache, factory reset (through Clockwork recovery), flashed stock kernel, then stock firmware..after I saw, that phone is working and my heart slowed back to normal, i did the same steps, but with CM9 kernel and CM9 ROM and it is working like charm now..
Hi guys,
My tablet suddenly went crazy since i installed Cm 10.1 , used to crash everywhile till yesterday where it crashed if failed to boot the room where only it gets stuck at the M motorola Logo screen, i decided im going to reflash the rom with its compatible Gapps thats when i faced another problem where my Rogue xm Recovery cant mount either cache or sdcard or internal memory, i kept restarting recovery but with no hope , till i found out i have to open recovery and wait like 3-5 mins till recovery can read device memory-internal memory, cache etc- - LIKE DEVICE WENT TOO SLOW- , i reflashed the rom but again doesnt boot, tried another EOS rom with its Gapps but also same result stuck at motorola boot screen - I FLASH LIKE A PRO wiping everything before flashing- i tried to flash another recovery TWRP but it couldnt read internal sdcard although its modded for that. Please give me some clues this tablet carries sweet memories of 2+ years :/
khafaga said:
Hi guys,
My tablet suddenly went crazy since i installed Cm 10.1 , used to crash everywhile till yesterday where it crashed if failed to boot the room where only it gets stuck at the M motorola Logo screen, i decided im going to reflash the rom with its compatible Gapps thats when i faced another problem where my Rogue xm Recovery cant mount either cache or sdcard or internal memory, i kept restarting recovery but with no hope , till i found out i have to open recovery and wait like 3-5 mins till recovery can read device memory-internal memory, cache etc- - LIKE DEVICE WENT TOO SLOW- , i reflashed the rom but again doesnt boot, tried another EOS rom with its Gapps but also same result stuck at motorola boot screen - I FLASH LIKE A PRO wiping everything before flashing- i tried to flash another recovery TWRP but it couldnt read internal sdcard although its modded for that. Please give me some clues this tablet carries sweet memories of 2+ years :/
Click to expand...
Click to collapse
hi please let me know if you got xoom fixed ?
I have similar issue after installing CM10.1 , tablet stucked on boot logo and because none of my volume buttons work I have no idea how to fix is ! ?
have this tablet for 3 years , it's a lot of stuff there
Hello
Yesterday I installed alien rom 5.0 onto my xperia J which was running cm10. It installed and worked very well until I realised I forgot to flash the root fix so I needed to reboot to recovery which I was unable to do because it wouldn't work. I decided to go ahead and install a cwm I found on a website and I could now boot into cwm however it kept flashing a charging symbol the the screen was pink whilst showing double and switching off. After a while it started working again but then crashed as soon as I hit the power button to restore my backup. Now my phone shows a black screen and when switched on flashes the led green twice and shows the sony logo then powers back off. I need help, I'm un experienced in this field of phones...
I have rooted and installed xRecovery on my old Xperia X8, everything fine there. I wanted to install Ginger DX custom rom http://forum.xda-developers.com/showthread.php?t=1188486. My phone is a version which can't have bootloader unlocked, or it will hardbrick, so I needed to install this rom for stock kernel. I got to recovery mode, backed up, wiped cache, factory reseted, and installed the rom, all fine til there. So when I made it reboot, i turned off and got stuck on "Sony Ericsson" screen. I waited some time, and when I saw it wasn't rebooting, I took out the battery, and when I rebooted it, it got stuck in the same screen. Also I can't seen to get to recovery mode by clicking "back" several times. Someone please help me, the phone is old, but it's the only one my brother has