[Q] Bricked my xperia j!!! - Sony Xperia Miro, Tipo (Dual), J, E

Hello
Yesterday I installed alien rom 5.0 onto my xperia J which was running cm10. It installed and worked very well until I realised I forgot to flash the root fix so I needed to reboot to recovery which I was unable to do because it wouldn't work. I decided to go ahead and install a cwm I found on a website and I could now boot into cwm however it kept flashing a charging symbol the the screen was pink whilst showing double and switching off. After a while it started working again but then crashed as soon as I hit the power button to restore my backup. Now my phone shows a black screen and when switched on flashes the led green twice and shows the sony logo then powers back off. I need help, I'm un experienced in this field of phones...

Related

[Q] Help I cannot get into download mode =(

Hey I had numasx running, I then tried installing MIUI, it did not work it booted up to the Samsung screen, I took out the battery manually booted into the cmw by pressing the volume keys and the power button, however the cmw changed colours from what was once red to now blue, i wiped and reflashed MIUI hoping it would work however it does not the samsung screen was on for 20 minutes, I tried bringing the phone back to At &T stock ( my phone is Rogers by the way) however this brick my phone where it constantly goes into a white screen and restarts when usb is connected.. any help, there is no way I can get into download mode.... When the phone is connected to the computer and Odin is on my screen it shows that my phone is constantly connecting and disconnecting ... What should I do? Should I send it into warrenty? and what is the difference between voodo lag fix and the regular blue cwm?... seriously htc phones do not seem to have this issue when flashing roms...
ramzilla136 said:
Hey I had numasx running, I then tried installing MIUI, it did not work it booted up to the Samsung screen, I took out the battery manually booted into the cmw by pressing the volume keys and the power button, however the cmw changed colours from what was once red to now blue, i wiped and reflashed MIUI hoping it would work however it does not the samsung screen was on for 20 minutes, I tried bringing the phone back to At &T stock ( my phone is Rogers by the way) however this brick my phone where it constantly goes into a white screen and restarts when usb is connected.. any help, there is no way I can get into download mode.... When the phone is connected to the computer and Odin is on my screen it shows that my phone is constantly connecting and disconnecting ... What should I do? Should I send it into warrenty? and what is the difference between voodo lag fix and the regular blue cwm?... seriously htc phones do not seem to have this issue when flashing roms...
Click to expand...
Click to collapse
hmm...someone else had this problem a few days ago.
http://forum.xda-developers.com/showthread.php?t=1437548&page=4
start at post #35
It's not a hardware issue though its a complete brick I just want to make sure other infuse owners don't get the same mistake and what steps can be taken to prevent it I am a noob when it comes to flashing especially this being my first samsung android but its the red cwm to the blue
it's not a brick.
brick is when you get nothing. absolutely nothing.
you've some sort of power looping...not brick.

[Q] bricked after install CM9 on xperia S ?

Hello There!
Being anything but an expert I carefully read instructions on how to unlock my SONY XPERIA S (LT26i) as I wanted to install CM9. This worked, but installing cm9 I f...ed up.... All seemed to go well, but after the final boot nothing happened, the screen stayed black.
When I try to unzip the file with cm9 from root again I get: 'installation aborted', '(status 7)' and the anouncement that the zip.file has an error in it.
If I try to start in normal mode (after a hard reset) i get freexperia logo for a short while, then the small led turns purple (i think) and the bottom, bar lights up for a sec or two. Then everything turns black again...
The led turns red all right when i try fastboot mode, but my computer no longer recognizes the phone.
Help me please!
Hey,
flash a new firmware with fastboot (up volume key + start button) at boot
VincentKnife said:
Hello There!
Being anything but an expert I carefully read instructions on how to unlock my SONY XPERIA S (LT26i) as I wanted to install CM9. This worked, but installing cm9 I f...ed up.... All seemed to go well, but after the final boot nothing happened, the screen stayed black.
When I try to unzip the file with cm9 from root again I get: 'installation aborted', '(status 7)' and the anouncement that the zip.file has an error in it.
If I try to start in normal mode (after a hard reset) i get freexperia logo for a short while, then the small led turns purple (i think) and the bottom, bar lights up for a sec or two. Then everything turns black again...
The led turns red all right when i try fastboot mode, but my computer no longer recognizes the phone.
Help me please!
Click to expand...
Click to collapse
Hello!
I have an identical problem. Is there a working version of [FXP117_update-cm-9.0.0-RC0-nozomi-UNOFFICIAL-signed.zip]? There appears to be no access to the phone's SD storage, so how do i flash it?
Have you tried wiping/flashing new firmware from windows, using for example Fastboot Commander? Maybe this will work
I had similar promlem with CM9 on my xperia pro. I solved it with total reinstall of phone. so I wiped cache, Dalvik cache, factory reset (through Clockwork recovery), flashed stock kernel, then stock firmware..after I saw, that phone is working and my heart slowed back to normal, i did the same steps, but with CM9 kernel and CM9 ROM and it is working like charm now..

Bricked!

After installing blisspop (or I don't really remember), I realized that WiFi wasn't working and neither was bluetooth so I decided to flash Extended Stock Kernel kernel, first with flashing the boot, then flashing the zip from recovery mode and even after that, the result was the same. It didn't work. Later on I went to the Phantom kernel's page and flashed that without checking that the kernel was meant for 4.4 and it bricked my device. Now, whenever the phone starts, it shows the Phantom kernel boot at start with its logo without any led light appearing below and due to that I'm unable to go into either flashmode or fastboot. It keeps restarting the Phantom boot at start and doesn't go any further. Please help!
EDIT: A more detailed version that I wrote a few months ago to the kernel's developer.
-
Previously I had my Xperia L reset on stock ftp then flashed the Extended Stock Kernel on it. Since the wifi wasn't working, I tried to download R17 and flashed it through CWM and now the phone keeps restarting on the Phantom Logo. It shows the logo, waits for about 10 seconds then restarts and the same keeps repeating. I saw it was for Kitkat but then too I insisted on installing. I can't access neither bootloader nor recovery mode. The light which comes when the Phantom Logo pops doesn't appear either. Can you help me please? Anything would be greatly appreciated. I know I did a stupid thing but I really don't want to give up on this device.
-
Xephor_EX said:
After installing blisspop (or I don't really remember), I realized that WiFi wasn't working and neither was bluetooth so I decided to flash Extended Stock Kernel kernel, first with flashing the boot, then flashing the zip from recovery mode and even after that, the result was the same. It didn't work. Later on I went to the Phantom kernel's page and flashed that without checking that the kernel was meant for 4.4 and it bricked my device. Now, whenever the phone starts, it shows the Phantom kernel boot at start with its logo without any led light appearing below and due to that I'm unable to go into either flashmode or fastboot. It keeps restarting the Phantom boot at start and doesn't go any further. Please help!
EDIT: A more detailed version that I wrote a few months ago to the kernel's developer.
-
Previously I had my Xperia L reset on stock ftp then flashed the Extended Stock Kernel on it. Since the wifi wasn't working, I tried to download R17 and flashed it through CWM and now the phone keeps restarting on the Phantom Logo. It shows the logo, waits for about 10 seconds then restarts and the same keeps repeating. I saw it was for Kitkat but then too I insisted on installing. I can't access neither bootloader nor recovery mode. The light which comes when the Phantom Logo pops doesn't appear either. Can you help me please? Anything would be greatly appreciated. I know I did a stupid thing but I really don't want to give up on this device.
-
Click to expand...
Click to collapse
yea.... output battery... reinput it.... DONT TOUCH POWERBUTTON.... holf vol - and connevt to pc
Sent from my Xperia T using XDA Free mobile app
SdtBarbarossa said:
yea.... output battery... reinput it.... DONT TOUCH POWERBUTTON.... holf vol - and connevt to pc
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
-
It worked, I flashed the generic ftf and everything's okay. Thank you so much!
-

My Xperia E3 doesn't start !

Hello,
This morning turning my phone on, everything worked, until the error messages like "com.snapchat.android process suddenly stopped" (I have received several of this) including one which bugged my phone: "the prossessus Xperia ™ 11 has stopped working" (the two "1" appeared like the™).
There I received messages that appeared and stood out immediately: I could not use my phone: I reboot. And here's the problem:
My phone is on and stays blocked on the first boot screen (Sony).
My phone is rooted since 8 months, and when it starts, it does not even reach the violet LED: so i'm unable to access the Recovery Mode.
When it charges it's the same: it remains stuck at the boot screen plus a red LED usual for chargings, and when I unplug the screen is still on with red LED indefinitely.
To turn it off (for not stay on all the time), I push with a pencil lead into the notch "off" (at the back of the phone on the left of the SD card)
The worst: When I try to connect my phone into fastboot mode or flashmode, the LED (blue or green) lights, but Flashtool doesn't recognize the device. When I unplug the device, the LED (blue or green) is still lighting. So I cannot flash (which I wanted to do) with Flashtool.
So I think it's a problem because the phone hangs at the beginning of the boot, maybe it's a bootloop, or a hardbrick (?).
This problem appeared like that, I think having done anything weird lately. The phone is one year and a half.
It's very difficult for me because I can not do anything that is in my possession and I greatly needed.
Anyone have a solution for this? Its very important.
Thank you so much !
PS : Very sorry for my english
Same problem i have facing more than 10-15 work stopped i try to install new rom but keel facing this problem but my phone enter in recovery mod but hangs on boot animation
hey there,, i m experiencing the same problem...flashtool doesnt detects my xperia too....but there is a fix for your phone..if u have not unlocked the bootloader then download sony pc companion and then try repairing your phone with it..**THIS WILL DELETE ALL DATA...or if u want to use flashtool then check and install the drivers for your xperia...!!HOPE THIS WORKS....
hit th thx button if it worked..

Restarting xperia p never gets past the sony logo

My xperia p is rooted and bootloader is unlocked. I tried honami moon walker and didnt like it. So restored it to my old back I took using CWM recovery backup.
I dont know if it got restored properly. I mean I was in honami moon walker and just restored the old backup which is jellybean os. Was it the way to do?
And then I tried to unlock the bootloader to try more roms like cyanogen. but the phone doesnt stay in fastboot mode or the violet light goes faster before I point to the customized interface file in my system. When I pointed, it told "windows was able to find the driver but unable to install it". Cannot find the file specified. I used an application quick boot(Reboot) to get into fastboot mode which was easy. But all in vain. In the process of getting into fastboot mode, I never got out. The screen will be blank.
Then I will try restarting by pressing the power and volume up buttons together and restoring to the old back up I took already.
Now whenever I restart my phone, it gets stuck with the sony logo and it keep restarting. Before trying the power plus volume up combination, it may stay in a blank screen with 2 pixel sized blinks on the two sides of the bottom screen.
So now I am afraid to restart my phone itself. Because it never restarts the phone but gets stuck with the sony logo and then I have to restore it to the old back up.
What should I do? I want to keep my phone rooted and unlock the bootloader and try new roms.

Categories

Resources